BIT-10 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.02 to 1.1.
BIT-20 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.1 to 1.2.
BIT-80 is an anti-microbial formulation used to prevent products from corroding that comes in a white or whitish powder. It is used in paints and coatings.
CIT/MIT-14 is an anti-microbial that comes in a yellow or yellow-green transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paint coatings and spinning prints to dye.
CIT/MIT-14+ is an anti-microbial that comes in a yellow transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paint coatings and spinning prints to dye. This product is not combustible and is VOC-free.
CIT/MIT-14M is an anti-microbial that comes in a yellow transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paints, adhesives, inks, and dyes. This product is not combustible and is VOC-free.
CIT/MIT-14PLUS is an anti-microbial that comes in a yellow or yellow-green transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paint coatings and spinning prints to dye. This product is not combustible and is VOC-free.
CIT/MIT-1.5 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.02 to 1.05 g/ml. It is used in paint coatings. This product is not combustible and is VOC-free.
CIT/MIT-1.5CG is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of 1.1 to 1.22 g/ml. It is used in water-based paints. This product is not combustible and is VOC-free.
CIT/MIT-1.5M is an anti-microbial that comes in a yellowish transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in water-based paints. This product is not combustible and is VOC-free.
CIT/MIT-2.0 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.02 to 1.05 g/ml. It is a compliant industrial oil article additive, for building materials, electric power metallurgy, paint coat...view more
CIT/MIT-2.0 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.02 to 1.05 g/ml. It is a compliant industrial oil article additive, for building materials, electric power metallurgy, paint coating, spinning, print to dye, deckle and water transaction etc.. This product is not combustible and is VOC-free. view less
CIT/MIT-2.0CG is a colorless or yellow transparent liquid broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the usage amount is small. It is suitable for use in daily chemicals, cosmetics, cleaning agents, water-based paint...view more
CIT/MIT-2.0CG is a colorless or yellow transparent liquid broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the usage amount is small. It is suitable for use in daily chemicals, cosmetics, cleaning agents, water-based paints, and other fields view less
CIT/MIT-2.5 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.03 to 1.06 g/ml. It is used in paint and coatings, spinning, print to dye, deckle and water transaction etc.. This product is not...view more
CIT/MIT-2.5 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.03 to 1.06 g/ml. It is used in paint and coatings, spinning, print to dye, deckle and water transaction etc.. This product is not combustible and is VOC-free. view less
CIT/MIT-2.5CG is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of 1.1 to 1.22 g/ml. It is used in water-based paints. This product is not combustible and is VOC-free.
CIT/MIT-3.0CG is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of 1.1 to 1.25 g/ml. It is used in water-based paints. This product is not combustible and is VOC-free.
CIT/MIT-FE is a preservative that comes in a colorless or yellow transparent liquid. This product has a density of 1.1 to 1.3 g/ml. It is used in paints and coatings.
CIT/MIT-PG10 is a preservative for the protection of oleic and aqueous phase products that comes in a colorless or yellow transparent liquid. This product has a density of 1.05 to 1.1 g/ml. It is used in paints and coatings.
DCOIT-97 is a preservative used to prevent corrosion and mildew that comes in a yellow yellow-white wax or white powder. It is used in paints especially marine paints to prevent mildew and marine pollution.
Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins.
Grilonit® H 82044 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a low yellowing tendency and low sensitivity to water. This product is used as a curing agent in liquid epoxy resins.
Grilonit® H 82062 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a short pot life, and after full cure a low sensitivity to water. This product is used as a curing agent in liquid epoxy resins.
Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, c...view more
Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy resins. view less
Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing ag...view more
Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing agent with liquid epoxy resins. view less
Grilonit® H 84043 is a modified cycloaliphatic polyamine adduct that has good flow properties, low carbamate tendency, and low yellowing tendency. This product is used as a slow amine for self-levelling mortars.
Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings.
Grilonit® V-68-39 is a high performance matting wax that is formulated to provide good gloss reduction, good flow, and enhanced mar and scratch resistance. This product used for matte finish powder coats.
MIT-20 is an anti-microbial that comes in a yellowish transparent liquid. This product has a density of greater than or equal to 1.02 g/ml. It is used in paints and synthetic polymer emulsions.
MIT-50 is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of greater than or equal to 1.1 g/ml. It is used in paints and synthetic polymer emulsions.
OIT-45 is an anti-microbial that comes in a yellowish transparent thick liquid. This product has a density of 1.02 to 1.05 g/ml. It is used in polymers and paints to protect against mildew.
OIT-98 is an anti-microbial that comes in a yellow transparent dense form liquid or tie crystal. This product has a density of 1.03 to 1.05 g/ml. It is used in paints to protect against mildew.
Primid® QM-1260 is an improved hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high color direct-fired powder coats.
Primid® SF-4510 is a hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high gloss powder coatings as well as applications were good outgassing properties are required.
Primid® XL-552 is a beta-hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in exterior weather resistant powder coats.
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
