2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive.
BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...view more
BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. view less
BIT-10 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.02 to 1.1.
BIT-20 is a broad-spectrum anti-microbial that comes in an amber liquid. It is used in paints and coatings, adhesives and inks to protect from corrosion. This product has a density of 1.1 to 1.2.
BIT-80 is an anti-microbial formulation used to prevent products from corroding that comes in a white or whitish powder. It is used in paints and coatings.
CIT/MIT-14 is an anti-microbial that comes in a yellow or yellow-green transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paint coatings and spinning prints to dye.
CIT/MIT-14+ is an anti-microbial that comes in a yellow transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paint coatings and spinning prints to dye. This product is not combustible and is VOC-free.
CIT/MIT-14M is an anti-microbial that comes in a yellow transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paints, adhesives, inks, and dyes. This product is not combustible and is VOC-free.
CIT/MIT-14PLUS is an anti-microbial that comes in a yellow or yellow-green transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paint coatings and spinning prints to dye. This product is not combustible and is VOC-free.
CIT/MIT-1.5 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.02 to 1.05 g/ml. It is used in paint coatings. This product is not combustible and is VOC-free.
CIT/MIT-1.5CG is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of 1.1 to 1.22 g/ml. It is used in water-based paints. This product is not combustible and is VOC-free.
CIT/MIT-1.5M is an anti-microbial that comes in a yellowish transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in water-based paints. This product is not combustible and is VOC-free.
CIT/MIT-2.0 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.02 to 1.05 g/ml. It is a compliant industrial oil article additive, for building materials, electric power metallurgy, paint coat...view more
CIT/MIT-2.0 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.02 to 1.05 g/ml. It is a compliant industrial oil article additive, for building materials, electric power metallurgy, paint coating, spinning, print to dye, deckle and water transaction etc.. This product is not combustible and is VOC-free. view less
CIT/MIT-2.0CG is a colorless or yellow transparent liquid broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the usage amount is small. It is suitable for use in daily chemicals, cosmetics, cleaning agents, water-based paint...view more
CIT/MIT-2.0CG is a colorless or yellow transparent liquid broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the usage amount is small. It is suitable for use in daily chemicals, cosmetics, cleaning agents, water-based paints, and other fields view less
CIT/MIT-2.5 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.03 to 1.06 g/ml. It is used in paint and coatings, spinning, print to dye, deckle and water transaction etc.. This product is not...view more
CIT/MIT-2.5 is an anti-microbial that comes in a light blue or blue-green transparent liquid. This product has a density of 1.03 to 1.06 g/ml. It is used in paint and coatings, spinning, print to dye, deckle and water transaction etc.. This product is not combustible and is VOC-free. view less
CIT/MIT-2.5CG is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of 1.1 to 1.22 g/ml. It is used in water-based paints. This product is not combustible and is VOC-free.
CIT/MIT-3.0CG is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of 1.1 to 1.25 g/ml. It is used in water-based paints. This product is not combustible and is VOC-free.
CIT/MIT-FE is a preservative that comes in a colorless or yellow transparent liquid. This product has a density of 1.1 to 1.3 g/ml. It is used in paints and coatings.
CIT/MIT-PG10 is a preservative for the protection of oleic and aqueous phase products that comes in a colorless or yellow transparent liquid. This product has a density of 1.05 to 1.1 g/ml. It is used in paints and coatings.
DCOIT-97 is a preservative used to prevent corrosion and mildew that comes in a yellow yellow-white wax or white powder. It is used in paints especially marine paints to prevent mildew and marine pollution.
Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time.
Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time.
Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time.
Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink.
Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide.
Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry.
MIT-20 is an anti-microbial that comes in a yellowish transparent liquid. This product has a density of greater than or equal to 1.02 g/ml. It is used in paints and synthetic polymer emulsions.
MIT-50 is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of greater than or equal to 1.1 g/ml. It is used in paints and synthetic polymer emulsions.
OIT, also known as 2-Octyl-4-Isothiazolin-3-Ketone, is a low toxic and highly effective broad spectrum antiseptic that is mainly used to control mildew. This product is also applicable in polymer emulsions, adhesives, sealants, and paint.
OIT-45 is an anti-microbial that comes in a yellowish transparent thick liquid. This product has a density of 1.02 to 1.05 g/ml. It is used in polymers and paints to protect against mildew.
OIT-98 is an anti-microbial that comes in a yellow transparent dense form liquid or tie crystal. This product has a density of 1.03 to 1.05 g/ml. It is used in paints to protect against mildew.
TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheeting...view more
TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheetings, adhesives, and more. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
