| AEPD® VOX 1000 | ANGUS Chemical Company | AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply...view more AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply with EU directive 2004/42/EC. Compared with other neutralizing amines, AEPD® VOX 1000 Neutralizing Amine offers one of the best all-round performances when taking odor, VOC, wet paint and dry film properties into account. view less | |
| ALKATERGE®-T | ANGUS Chemical Company | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...view more ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | |
| AMP® | ANGUS Chemical Company | AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This pro...view more AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This product also has a wide variety of uses in water-borne and solvent-borne coatings, boiler-water systems, metalworking fluids, and polyethylene and wax emulsions. view less | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| AVANTANE® PA 4000 | ANGUS Chemical Company | AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive qu...view more AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation, press output can be increased, which results in even further operational economies. view less | |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company | FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE®...view more FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE® CA 6000 is used in solvent-based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. This includes enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less | |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...view more Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). view less | |
| Trixene BI 200 | Baxenden Chemicals Ltd. | Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...view more Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 201 | Baxenden Chemicals Ltd. | Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...view more Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 220 | Baxenden Chemicals Ltd. | Trixene BI 220 is a nonionic aqua blocked isocyanate dispersion that is designed for water-based 1 and 2-K systems. This product can be used as an adhesion promoter and cross-linker for finishes and coatings on leather, paper, textiles, and more. | |
| Trixene BI 7641 | Baxenden Chemicals Ltd. | Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| Trixene BI 7642 | Baxenden Chemicals Ltd. | Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...view more Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| Trixene BI 7674 | Baxenden Chemicals Ltd. | Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7675 | Baxenden Chemicals Ltd. | Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7770 | Baxenden Chemicals Ltd. | Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7771 | Baxenden Chemicals Ltd. | Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7772 | Baxenden Chemicals Ltd. | Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7774 | Baxenden Chemicals Ltd. | Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7779 | Baxenden Chemicals Ltd. | Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7950 | Baxenden Chemicals Ltd. | Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7951 | Baxenden Chemicals Ltd. | Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under...view more Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7960 | Baxenden Chemicals Ltd. | Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured und...view more Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7961 | Baxenden Chemicals Ltd. | Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fa...view more Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7963 | Baxenden Chemicals Ltd. | Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7982 | Baxenden Chemicals Ltd. | Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7991 | Baxenden Chemicals Ltd. | Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7992 | Baxenden Chemicals Ltd. | Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...view more Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...view more Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. view less | |
| Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...view more Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. view less | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company | ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials use...view more ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials used in most polyurethane and polyurea systems. This product will also alleviate the detrimental effects of humidity in the cast or spray application of two-component polyurethane and polyurea systems. view less |
