| Carnauba Wax T1 | Carnauba do Brasil Ltda. | Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic,...view more Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. view less | |
| Carnauba Wax T3 | Carnauba do Brasil Ltda. | Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, a...view more Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. view less | |
| Carnauba Wax T4 Centrifuged | Carnauba do Brasil Ltda. | Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plas...view more Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. view less | |
| Carnauba Wax T4 Filtered | Carnauba do Brasil Ltda. | Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic...view more Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. view less | |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...view more Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). view less | |
| Trixene BI 200 | Baxenden Chemicals Ltd. | Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...view more Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 201 | Baxenden Chemicals Ltd. | Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...view more Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 220 | Baxenden Chemicals Ltd. | Trixene BI 220 is a nonionic aqua blocked isocyanate dispersion that is designed for water-based 1 and 2-K systems. This product can be used as an adhesion promoter and cross-linker for finishes and coatings on leather, paper, textiles, and more. | |
| Trixene BI 7641 | Baxenden Chemicals Ltd. | Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| Trixene BI 7642 | Baxenden Chemicals Ltd. | Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...view more Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| Trixene BI 7674 | Baxenden Chemicals Ltd. | Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7675 | Baxenden Chemicals Ltd. | Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7770 | Baxenden Chemicals Ltd. | Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7771 | Baxenden Chemicals Ltd. | Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7772 | Baxenden Chemicals Ltd. | Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7774 | Baxenden Chemicals Ltd. | Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7779 | Baxenden Chemicals Ltd. | Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7950 | Baxenden Chemicals Ltd. | Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7951 | Baxenden Chemicals Ltd. | Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under...view more Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7960 | Baxenden Chemicals Ltd. | Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured und...view more Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7961 | Baxenden Chemicals Ltd. | Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fa...view more Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7963 | Baxenden Chemicals Ltd. | Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7982 | Baxenden Chemicals Ltd. | Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7991 | Baxenden Chemicals Ltd. | Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7992 | Baxenden Chemicals Ltd. | Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...view more Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...view more Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. view less | |
| Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...view more Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. view less |
