ASCONIUM® 110 | ASCOTEC | ASCONIUM® 110 is a liquid corrosion inhibitor for long-term protection of dry film coatings, mainly used in solventborne alkyd clear coats. | Request Sample |
ASCONIUM® 111 | ASCOTEC | ASCONIUM® 111 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd, urethane-alkyd, 1K or 2K polyurethane resins. | Request Sample |
ASCONIUM® 112 | ASCOTEC | ASCONIUM® 112 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on pure or modified alkyd, polyester, 1K or 2K polyurethane resins. | Request Sample |
ASCONIUM® 114 | ASCOTEC | ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins. | Request Sample |
ASCONIUM® 130 | ASCOTEC | ASCONIUM® 130 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints; It is mainly used in waterborne or solventborne epoxy resins. | Request Sample |
ASCONIUM® 140 | ASCOTEC | ASCONIUM® 140 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on alkyd or urethane-alkyd resins, and waterborne paints based on 1K or 2K polyurethane resins. | Request Sample |
ASCONIUM® 141S1 | ASCOTEC | ASCONIUM® 141S1 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on 2K acrylic or 2K PU resins, and waterborne paints based on epoxy resins. | Request Sample |
ASCONIUM® 142DA | ASCOTEC | ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
ASCONIUM® 143 | ASCOTEC | ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. | Request Sample |
ASCONIUM® 144DA | ASCOTEC | ASCONIUM® 144DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
New! ASCONIUM® 500 | ASCOTEC | ASCONIUM® 500 is a liquid corrosion inhibitor for long-term protection of DTM clear coats or paints. It is VOC and heavy metal free, tailored for post addition and designed for water-based formulations based on acrylic, alkyd, epoxy, and PU binders. | Request Sample |
ASCOTRAN® AL4 | ASCOTEC | ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the...view more ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
ASCOTRAN® H10 | ASCOTEC | ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...view more ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
ASCOTRAN® H14 | ASCOTEC | ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and...view more ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
ASCOTRAN® H17 | ASCOTEC | ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...view more ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
ASCOTRAN® H18 | ASCOTEC | ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during dryin...view more ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...view more ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
ASCOTRAN® HPB | ASCOTEC | ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and a...view more ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
ASCOTRUST® X1 | ASCOTEC | ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
ASCOTRUST® X2 | ASCOTEC | ASCOTRUST® X2 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne clear coatings to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
ASCOTRUST® X4 | ASCOTEC | ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...view more ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less | Request Sample |
ORGASOL® 1002 ES5 NAT 1 | Arkema | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...view more ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. view less | Request Sample |
ORGASOL® 2001 EXD NAT 1 | Arkema | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. view less | Request Sample |
ORGASOL® 2001 UD NAT 1 | Arkema | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. view less | Request Sample |
ORGASOL® 2001 UD NAT 2 | Arkema | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less | Request Sample |
ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less | Request Sample |
ORGASOL® 2002 ES3 NAT 3 | Arkema | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. view less | Request Sample |
ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. view less | Request Sample |
ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. view less | Request Sample |
ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. view less | Request Sample |
ORGASOL® 2002 EXD NAT 1 | Arkema | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less | Request Sample |
ORGASOL® 3501 EXD NAT 1 | Arkema | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...view more ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. view less | Request Sample |
ORGASOL® 3502 D NAT 1 | Arkema | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...view more ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. view less | Request Sample |
Neocryl XK-117® Water-based White Glossy Coating for Direct to Metal (Formulation #M-60-117XK) | ASCOTEC | Neocryl XK-117® is a water-based white glossy coating for direct to metal. |