1, 2-Diaminocyclohexane is a clear liquid consisting of a mixture of cis and trans isomers used as an epoxy curing agent enhancing film hardness to promote high chemical and physical resistance properties in subsequent coatings. It has excellent resistanc...view more
1, 2-Diaminocyclohexane is a clear liquid consisting of a mixture of cis and trans isomers used as an epoxy curing agent enhancing film hardness to promote high chemical and physical resistance properties in subsequent coatings. It has excellent resistance to blush and low viscosity. It also has high resistance to chemicals, staining, and moisture uptake. 1, 2-Diaminocyclohexane is used for floor coatings, marine coatings, and other industrial coatings where high chemical resistance is needed. view less
2-Ethylhexyl Acetate is a clear, polar solvent with low volatility, suitable as a carrier solvent for nitrocellulose production and many other natural and synthetic resins used in a wide range of industrial applications. It is hydrophobic and has a coales...view more
2-Ethylhexyl Acetate is a clear, polar solvent with low volatility, suitable as a carrier solvent for nitrocellulose production and many other natural and synthetic resins used in a wide range of industrial applications. It is hydrophobic and has a coalescing action in emulsion paints where VOC is not a driving issue. 2-Ethylhexyl Acetate is used in some lacquers, NC lacquer emulsions, screen inks, and some enamels to improve flow and film formation. view less
Coasol™ is a mixture of Di-Isobutyl Succinate, Di-Isobutyl Glutarate and Di-Isobutyl Adipate. It is a very high performance coalescing system, which gives the formulator flexibility to achieve low VOC targets whilst improving paint performance in a number...view more
Coasol™ is a mixture of Di-Isobutyl Succinate, Di-Isobutyl Glutarate and Di-Isobutyl Adipate. It is a very high performance coalescing system, which gives the formulator flexibility to achieve low VOC targets whilst improving paint performance in a number of areas. It has excellent water resistance, improved film hardness without cracking, and improved color development and minimal impact on gloss. Coasol™ is used in printing paint cleaners, paint removal formulations, and floor wax removal formulations. view less
Coasol™ 290 Plus is a mixture of di-esters. It is a very high performance coalescing system, which gives the formulator flexibility to achieve low VOC targets whilst improving paint performance in a number of areas. It has reduced solvent loading to allow...view more
Coasol™ 290 Plus is a mixture of di-esters. It is a very high performance coalescing system, which gives the formulator flexibility to achieve low VOC targets whilst improving paint performance in a number of areas. It has reduced solvent loading to allow incorporation of open time extenders and freeze/thaw protection systems. It also has improved paint rheology and pigment wetting. Coasol™ 290 Plus is used in printing paint cleaners, paint removal formulations, and floor wax removal formulations. view less
D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations.
D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants.
D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...view more
D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. view less
D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...view more
D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. view less
D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...view more
D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. view less
D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml.
D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml.
D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml.
D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml.
D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...view more
D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...view more
D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...view more
D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
Di-n-Butyl Ether is a powerful solvent for Grignard reactions, particularly those with β-hydrogens increasing the yield of addition products. It is the principle solvent for the application of the coating of CD-R manufacturing. Di-n-Butyl Ether is used in...view more
Di-n-Butyl Ether is a powerful solvent for Grignard reactions, particularly those with β-hydrogens increasing the yield of addition products. It is the principle solvent for the application of the coating of CD-R manufacturing. Di-n-Butyl Ether is used in manufacturing CD-Rs. view less
Estasol™ is a mixture of dimethyl succinate, dimethyl glutarate, and dimethyl adipate. It gives a low odor and low vapor pressure with excellent solvency in a wide range of systems. Estasol™ is used in commercial graffiti removal, paint strippers, wood co...view more
Estasol™ is a mixture of dimethyl succinate, dimethyl glutarate, and dimethyl adipate. It gives a low odor and low vapor pressure with excellent solvency in a wide range of systems. Estasol™ is used in commercial graffiti removal, paint strippers, wood coatings, textile lubricants, and in polyurethane clean-up. view less
Ethylene Glycol Diacetate is a colourless, low odor solvent. It has a very slow evaporation profile that finds major applications in foundry core-binding and in thermoplastic acrylic coatings. Ethylene Glycol Diacetate has a low evaporation rate, such as ...view more
Ethylene Glycol Diacetate is a colourless, low odor solvent. It has a very slow evaporation profile that finds major applications in foundry core-binding and in thermoplastic acrylic coatings. Ethylene Glycol Diacetate has a low evaporation rate, such as low MIR, non-HAP, non-Sara, and is biodegradable. Ethylene Glycol Diacetate is used in baking lacquers, enamels, a solvent for cellulosic coatings, and can be used in some ink systems such as screen inks. view less
Glutaric Anhydride is a white crystalline powder and a carboxylic acid anhydride. It is more reactive than its corresponding acid and ester and thus commonly used as an intermediate. Glutaric Anhydride is used dyes, and in the production of polymers, part...view more
Glutaric Anhydride is a white crystalline powder and a carboxylic acid anhydride. It is more reactive than its corresponding acid and ester and thus commonly used as an intermediate. Glutaric Anhydride is used dyes, and in the production of polymers, particularly modified unsaturated linear (epoxy) polyesters with interesting effects on cure speed and reactivity. view less
Isoamyl Acetate is used as a low toxicity solvent. It was extensively used in the aircraft industry for stiffening fabric flying surfaces as the carrier for the nitrocellulose and retains this application in model aircraft only. Isoamyl Acetate is used in...view more
Isoamyl Acetate is used as a low toxicity solvent. It was extensively used in the aircraft industry for stiffening fabric flying surfaces as the carrier for the nitrocellulose and retains this application in model aircraft only. Isoamyl Acetate is used in varnishes and nitrocellulose lacquers. view less
Isoamyl Alcohol is a diluent in some printing inks, lacquers, paints, and gums. It is also called Isoamyl Alcohol 99%. Isoamyl Alcohol is used in printing inks, paints, and lacquers.
LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml.
LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1....view more
LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1.04 g/ml. view less
LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml.
LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...view more
LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. view less
LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...view more
LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. view less
LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...view more
LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. view less
LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...view more
LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. view less
LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...view more
LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. view less
LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml.
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.