2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive.
BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...view more
BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. view less
EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more
EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less
EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more
EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less
EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...view more
EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. view less
EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...view more
EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. view less
EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...view more
EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. view less
Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time.
Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time.
Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time.
Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink.
Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide.
Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry.
OIT, also known as 2-Octyl-4-Isothiazolin-3-Ketone, is a low toxic and highly effective broad spectrum antiseptic that is mainly used to control mildew. This product is also applicable in polymer emulsions, adhesives, sealants, and paint.
TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheeting...view more
TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheetings, adhesives, and more. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
