Kemapox® EM 260 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coating...view more Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 77000-120000 mPas at 23°C. view less | |
Kemapox® EM 267 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be ...view more Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 5000 mPas at 23°C. view less | |
Kemapox® HF 308 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°...view more Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 210 mPas at 23°C. view less | |
Kemapox® HF 317 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also...view more Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also suitable for castings with an extended pot life. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
Kemapox® HF 321 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 321 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 22 mPas at 23°C. | |
Kemapox® HF 324 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 324 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 26 mPas at 23°C. | |
Kemapox® HF 326 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at ...view more Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
Kemapox® HF 328 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 328 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in epoxy systems for primers and coatings for solvent-free systems. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 150 mPas at 23°C. | |
Kemapox® HF 331 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mP...view more Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mPas at 23°C. view less | |
Kemapox® HF 332 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications...view more Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications, coatings, and mortars. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. view less | |
Kemapox® HF 337 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient tempera...view more Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient temperatures. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
Kemapox® HF 338 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 338 is a modified aliphatic polyamine epoxy hardener. This product is designed for primers and darker colored coatings and mortars for solvent-free systems. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 200 mPas at 23°C. | |
Kemapox® HF 339 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 ...view more Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
Kemapox® HF 340 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It ...view more Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 60 mPas at 23°C. view less | |
Kemapox® HF 343 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 343 is a modified aliphatic polyamine epoxy hardener. This product is designed for systems where elastic and tough self-leveling floors and coatings are required. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. | |
Kemapox® HF 346 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/...view more Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 70 mPas at 23°C. view less | |
Kemapox® HF 349 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C a...view more Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 50 mPas at 23°C. view less | |
Kemapox® HF 366 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkal...view more Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvent is required. It has a density of 1.00 g/cm3 at 23°C and a viscosity of 1500 mPas at 23°C. view less | |
Kemapox® HF 367 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkali...view more Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvents is required. It has a density of 1.10 g/cm3 at 23°C and a viscosity of 1100 mPas at 23°C. view less | |
Kemapox® HF 369 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis an...view more Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis and solvents is required. It can also be used to accelerate slow-setting systems such as tar-epoxy coatings or mortars. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 1900 mPas at 23°C. view less | |
Kemapox® HF 381 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 28000 mPas at 23°C. view less | |
Kemapox® HF 383 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 4000 mPas at 25°C. view less | |
Kemapox® HF 385 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 18000 mPas at 25°C. view less | |
Kemapox® HF 388 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 9000 mPas at 23°C. view less | |
Kemapox® HW 500 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and floorin...view more Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 2000 mPas at 25°C. view less | |
Kemapox® HW 502 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring application...view more Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.08 g/cm3 at 23°C and a viscosity of 17000 mPas at 25°C. view less | |
Kemapur® PCU 200 S | CTP Egypt S.A.E. CTP Original | Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring appli...view more Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring applications. view less | |
Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...view more Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. view less | |
Ketjenflex® 2 | Axcentive Sarl | Ketjenflex® 2 is ortho-toluenesulfonamide in the form of white to creamy crystals. It is used as a plasticizer in melamine coatings, laminating resins, and thermosetting resins. | |
Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...view more Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. view less | |
Ketjenflex® 9S | Axcentive Sarl | Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wo...view more Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wood adhesives, epoxy and polyurethane coatings and adhesives, and other applications. view less | |
Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...view more Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. view less | |
Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...view more Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. view less | |
PTSC | Axcentive Sarl | PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blockin...view more PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blocking agent to protect hydroxyl groups during reactions. view less |