| DOWSIL™ 100F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and...view more DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. view less | |
| DOWSIL™ 102F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cau...view more DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. view less | |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...view more DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. view less | |
| DOWSIL™ 108F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (V...view more DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. view less | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | |
| DOWSIL™ 14 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol fun...view more DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. view less | |
| DOWSIL™ 163 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolym...view more DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. view less | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | |
| DOWSIL™ 210S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enha...view more DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. view less | |
| DOWSIL™ 211S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...view more DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. view less | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 27 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 27 Additive is a nonreactive silicone glycol surfactant with both silicone and organic characteristics. It is supplied as a 100% active fluid. This product may be incorporated into solvent, aqueous, solventless and energy curable systems. | |
| DOWSIL™ 29 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 3 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases...view more DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. view less | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...view more DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 500W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 501W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 502W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 51 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 54 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen ...view more DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen printing inks. view less | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, a...view more DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. view less | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each produ...view more DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone view less | |
| DOWSIL™ 62 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with l...view more DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with low tendency to cause defects or affect coating gloss. view less | |
| DOWSIL™ 67 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 68 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 700P Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of p...view more DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. view less | |
| DOWSIL™ 71 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | |
| DOWSIL™ 74 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and ...view more DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven...view more DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...view more DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene e...view more DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. view less | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 87 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings a...view more DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. view less | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for sil...view more DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for silicone resin based coatings, and can be used with alkyd coatings. view less | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| Epotec® TH 7201 | Aditya Birla | Epotec® TH 7201 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It contributes to high chemical resistance - including outstanding resistance to strong oxidizing acids, many bases, chlorinated hydrocarbons, a...view more Epotec® TH 7201 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It contributes to high chemical resistance - including outstanding resistance to strong oxidizing acids, many bases, chlorinated hydrocarbons, and methanol-gasoline mixtures. This product is ideal for use in chemical resistant flooring applications, chemical resistant coatings & linings, and solvent-free coatings. view less | |
| Epotec® TH 7202 | Aditya Birla | Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This ...view more Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in fast setting adhesives and gel coats. view less | |
| Epotec® TH 7203 | Aditya Birla | Epotec® TH 7203 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It features good reactivity even at low temperatures, develops rapid physical and mechanical properties, and yields surfaces with good chemical ...view more Epotec® TH 7203 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It features good reactivity even at low temperatures, develops rapid physical and mechanical properties, and yields surfaces with good chemical resistance. This product is ideal for use in chemical resistant coatings, secondary containment linings, and industrial protective coatings. view less | |
| Epotec® TH 7207 | Aditya Birla | Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator fun...view more Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator functionality with other polyamine curing agents. This product is ideal for use in chemical resistant coatings and rapid setting adhesives. view less | |
| Epotec® TH 7210 | Aditya Birla | Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agent...view more Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in solvent-free coatings and fast setting adhesives. view less | |
| Epotec® TH 7211 | Aditya Birla | Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This prod...view more Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This product is ideal for use in high solids & solvent-free coatings, adhesives, and floor toppings. view less | |
| Epotec® TH 7212 | Aditya Birla | Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and hi...view more Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and high solids, low VOC, & solvent-free coatings. view less | |
| Epotec® TH 7301 | Aditya Birla | Epotec® TH 7301 is a low viscosity, low color, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, hig...view more Epotec® TH 7301 is a low viscosity, low color, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high solid coatings, self-leveling flooring applications, primers & screeds, transparent coatings, and chemical resistant linings. view less | |
| Epotec® TH 7302 | Aditya Birla | Epotec® TH 7302 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides good resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high soli...view more Epotec® TH 7302 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides good resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high solids coatings, primers & screeds, chemical resistant linings, and water proofing applications. view less | |
| Epotec® TH 7310 | Aditya Birla | Epotec® TH 7310 is a moderate viscosity, low color epoxy curing agent which, when cured with standard epoxy resin, provides surfaces with high gloss and resistance to various chemicals. This product is ideal for use in self-leveling floors & top coats, hi...view more Epotec® TH 7310 is a moderate viscosity, low color epoxy curing agent which, when cured with standard epoxy resin, provides surfaces with high gloss and resistance to various chemicals. This product is ideal for use in self-leveling floors & top coats, high solids & low VOC coatings, and clear or colored wood lacquers. view less | |
| Epotec® TH 7320 | Aditya Birla | Epotec® TH 7320 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. This product is ideal for use in solvent-free, high-filled self-leveling coatings, primers & screeds, transparent coatings, and c...view more Epotec® TH 7320 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. This product is ideal for use in solvent-free, high-filled self-leveling coatings, primers & screeds, transparent coatings, and chemical resistant linings. view less | |
| Epotec® TH 7901 | Aditya Birla | Epotec® TH 7901 is a low viscosity, modified, cycloaliphatic polyamine-based mannich base curing agent for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical res...view more Epotec® TH 7901 is a low viscosity, modified, cycloaliphatic polyamine-based mannich base curing agent for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical resistant high solids coatings, chemical resistant flooring coatings, and self-leveling floor toppings. view less | |
| Epotec® TH 7902 | Aditya Birla | Epotec® TH 7902 is a a low viscosity, modified, phenol-free, cycloaliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal...view more Epotec® TH 7902 is a a low viscosity, modified, phenol-free, cycloaliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical resistant high solids coatings, chemical resistant flooring coatings, and concrete primers & repair compounds. view less | |
| Epotec® TH 7903 | Aditya Birla | Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...view more Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. view less | |
| Epotec® TH 7905 | Aditya Birla | Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...view more Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. view less | |
| Epotec® TH 7940 | Aditya Birla | Epotec® TH 7940 is a phenalkamine curing agent designed for fast curing. Capable of curing at low temperatures and under high humidity conditions, it is also compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for u...view more Epotec® TH 7940 is a phenalkamine curing agent designed for fast curing. Capable of curing at low temperatures and under high humidity conditions, it is also compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based & high solids coatings, concrete floor coatings, pipe & tank linings, and anti-corrosive maintenance coatings. view less | |
| Epotec® TH 7940NB | Aditya Birla | Epotec® TH 7940NB is a phenalkamine curing agent in solvent, designed for a fast cure. It can be used with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based and high solids coatings, pipe and tank linings...view more Epotec® TH 7940NB is a phenalkamine curing agent in solvent, designed for a fast cure. It can be used with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based and high solids coatings, pipe and tank linings, concrete floor coatings, and anti-corrosive maintenance coatings. view less | |
| Epotec® TH 7941 | Aditya Birla | Epotec® TH 7941 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids co...view more Epotec® TH 7941 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial, marine, & pipe coatings. view less | |
| Epotec® TH 7941S10 | Aditya Birla | Epotec® TH 7941S10 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids...view more Epotec® TH 7941S10 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial maintenance, marine, & pipe coatings. view less | |
| Epotec® TH 7942 | Aditya Birla | Epotec® TH 7942 is a phenalkamine curing agent in solvent, designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-base...view more Epotec® TH 7942 is a phenalkamine curing agent in solvent, designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based & high solids coatings, concrete floor coatings, pipe & tank linings, and anti-corrosive maintenance coatings. view less | |
| Epotec® TH 7966 | Aditya Birla | Epotec® TH 7966 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids co...view more Epotec® TH 7966 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial maintenance, marine, & pipe coatings. view less | |
| Epotec® TH 981 | Aditya Birla | Epotec® TH 981 is a solid phenolic hardener based on epoxy resin and bisphenol-A. This product is ideal for use in both decorative and functional powder coatings. | |
| Epotec® TH 982 | Aditya Birla | Epotec® TH 982 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator. This product is ideal for use in both decorative and functional powder coatings. | |
| Epotec® TH 983 | Aditya Birla | Epotec® TH 983 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator and flow modifier. This product is ideal for use in both decorative and protective powder coatings. | |
| Epotec® THW 4501 | Aditya Birla | Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveli...view more Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveling and trowelable flooring applications. view less | |
| Epotec® THW 4502 | Aditya Birla | Epotec® THW 4502 is a water-reducible, water-based, solvent-free epoxy curing agent featuring zero VOC formulation capability, good gloss appearance, and high hardness properties. This product is ideal for use in metal & concrete coatings, primers & seale...view more Epotec® THW 4502 is a water-reducible, water-based, solvent-free epoxy curing agent featuring zero VOC formulation capability, good gloss appearance, and high hardness properties. This product is ideal for use in metal & concrete coatings, primers & sealers for concrete floors, and general purpose maintenance coatings. view less | |
| Epotec® THW 4503 | Aditya Birla | Epotec® THW 4503 is a water-based, solvent-free epoxy curing agent featuring good hardness and compressive strength development, excellent adhesion, and zero voc formulation capability. This product is ideal for use in trowelable floor coatings and primer...view more Epotec® THW 4503 is a water-based, solvent-free epoxy curing agent featuring good hardness and compressive strength development, excellent adhesion, and zero voc formulation capability. This product is ideal for use in trowelable floor coatings and primers & sealers for concrete walls and floors. view less | |
| Epotec® THW 4504 | Aditya Birla | Epotec® THW 4504 is a water-based epoxy curing agent featuring excellent strength, water vapor permeability, and adhesion to damp surfaces, as well as VOC-free formulation capability. This product is ideal for use in coatings, primers, and sealers for sel...view more Epotec® THW 4504 is a water-based epoxy curing agent featuring excellent strength, water vapor permeability, and adhesion to damp surfaces, as well as VOC-free formulation capability. This product is ideal for use in coatings, primers, and sealers for self-leveling, trowelable, and concrete floors. view less | |
| XIAMETER® AFE-0700 Antifoam Emulsion | Dow Performance Silicones Paints, Inks and Coatings | XIAMETER® AFE-0700 Antifoam Emulsion is designed to provide optimum antifoam performance combined with good dilution stability and compatibility in various systems. It can be used in a wide variety of applications. This product is characterized by very go...view more XIAMETER® AFE-0700 Antifoam Emulsion is designed to provide optimum antifoam performance combined with good dilution stability and compatibility in various systems. It can be used in a wide variety of applications. This product is characterized by very good dilution stability in tap and demineralized water as well as excellent long term foam control persistence. view less | |
| XIAMETER® AFE-2210 Antifoam Emulsion | Dow Performance Silicones Paints, Inks and Coatings | XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product i...view more XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product is suitable for use in high gloss, semi-gloss and flat latex (emulsion) paints. view less |
