| ACCELERATOR 399 | Huntsman Performance Products | Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy system...view more Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy systems. view less | |
| AMINOETHYLPIPERAZINE - HP (AEP-HP) | Huntsman Performance Products | AMINOETHYLPIPERAZINE - HP (AEP-HP) is a highly reactive epoxy curing agent and epoxy curing promoter for use with JEFFAMINE® amine hardeners in curing epoxy resins. | |
| Aminopropyldiethanolamine (APDEA) | Huntsman Performance Products | Aminopropyldiethanolamine (APDEA) is a clear, essentially colourless, high-boiling liquid undergoing reactions typical of primary amines and alcohols. Finds use as chain extender or co-curing agent in coatings and can serve as a chemical intermediate. | |
| Aminopropylmorpholine (APM) | Huntsman Performance Products | Aminopropylmorpholine (APM) is a clear, essentially colourless, low viscosity amine that is highly reactive with glycidyl ether type resins, and also finds use as reactive diluent in epoxy formulations. | |
| APMMEA | Huntsman Performance Products | APMMEA A clear, essentially colourless, low viscosity amine neutralizer, with a high flash point and a mild odour. Containing amine and alcohols groups, it provides multiple features. | |
| APMMEA-WB | Huntsman Performance Products | APMMEA-WB is a clear, colourless to light yellow, low viscosity amine neutralizer, with a high flash point and a mild odour. Containing amine and alcohol groups, it provides multiple features. | |
| ASCONIUM® 110 | ASCOTEC | ASCONIUM® 110 is a liquid corrosion inhibitor for long-term protection of dry film coatings, mainly used in solventborne alkyd clear coats. | Request Sample |
| ASCONIUM® 111 | ASCOTEC | ASCONIUM® 111 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd, urethane-alkyd, 1K or 2K polyurethane resins. | Request Sample |
| ASCONIUM® 112 | ASCOTEC | ASCONIUM® 112 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on pure or modified alkyd, polyester, 1K or 2K polyurethane resins. | Request Sample |
| ASCONIUM® 114 | ASCOTEC | ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins. | Request Sample |
| ASCONIUM® 130 | ASCOTEC | ASCONIUM® 130 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints; It is mainly used in waterborne or solventborne epoxy resins. | Request Sample |
| ASCONIUM® 140 | ASCOTEC | ASCONIUM® 140 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on alkyd or urethane-alkyd resins, and waterborne paints based on 1K or 2K polyurethane resins. | Request Sample |
| ASCONIUM® 141S1 | ASCOTEC | ASCONIUM® 141S1 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on 2K acrylic or 2K PU resins, and waterborne paints based on epoxy resins. | Request Sample |
| ASCONIUM® 142DA | ASCOTEC | ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
| ASCONIUM® 143 | ASCOTEC | ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. | Request Sample |
| ASCONIUM® 144DA | ASCOTEC | ASCONIUM® 144DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
| New! ASCONIUM® 500 | ASCOTEC | ASCONIUM® 500 is a liquid corrosion inhibitor for long-term protection of DTM clear coats or paints. It is VOC and heavy metal free, tailored for post addition and designed for water-based formulations based on acrylic, alkyd, epoxy, and PU binders. | Request Sample |
| ASCOTRAN® AL4 | ASCOTEC | ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the...view more ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| ASCOTRAN® H10 | ASCOTEC | ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...view more ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| ASCOTRAN® H14 | ASCOTEC | ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and...view more ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| ASCOTRAN® H17 | ASCOTEC | ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...view more ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| ASCOTRAN® H18 | ASCOTEC | ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during dryin...view more ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...view more ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| ASCOTRAN® HPB | ASCOTEC | ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and a...view more ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| ASCOTRUST® X1 | ASCOTEC | ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| ASCOTRUST® X2 | ASCOTEC | ASCOTRUST® X2 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne clear coatings to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| ASCOTRUST® X4 | ASCOTEC | ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| Diethylenetriamine (DETA) | Huntsman Performance Products | Diethylenetriamine (DETA) is a linear ethyleneamine containing two primary and one secondary nitrogen. DETA is a single-component product that is clear and colourless, with an ammonia-like odour. | |
| Dimethyldipropylenetriamine (DMDPTA) | Huntsman Performance Products | Dimethyldipropylenetriamine (DMDPTA) is a clear, essentially colourless, high-boiling liquid that undergoes reactions typical of primary amines. DMDPTA contains one primary, one secondary and one tertiary amine group, which makes it of interest in many ap...view more Dimethyldipropylenetriamine (DMDPTA) is a clear, essentially colourless, high-boiling liquid that undergoes reactions typical of primary amines. DMDPTA contains one primary, one secondary and one tertiary amine group, which makes it of interest in many applications for use as co-curing agent, accelerator, chain extender, or as reactive intermediate in synthesis. view less | |
| ECA 29 Epoxy Curing Agent | Huntsman Performance Products | ECA 29 Epoxy Curing Agent is a mixture of aliphatic polyamines derived from ethylenediamine, useful as an epoxy curing agent in applications where higher glass transition temperature and reasonably fast reactivity are needed with longer pot life. | |
| ETHYLENEDIAMINE (EDA) | Huntsman Performance Products | ETHYLENEDIAMINE (1,2-ethanediamine) is the lowest molecular weight ethyleneamine. It contains two primary nitrogens. EDA is a single-component product that is clear and colorless, with an ammonia-like odor. | |
| JEFFAMINE® D-2000 Polyoxypropylenediamine | Huntsman Performance Products | JEFFAMINE® D-2000 Polyoxypropylenediamine is an amine-terminated polyoxypropylene diol that has wide use in epoxy and polyurea systems. | |
| JEFFAMINE® D-2010 Polyetheramine | Huntsman Performance Products | JEFFAMINE® D-2010 polyetheramine is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, JEFFAMINE® D-2010 polyetheramine is a difunctional, primary amine with average molecular weight of about 2000. The...view more JEFFAMINE® D-2010 polyetheramine is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, JEFFAMINE® D-2010 polyetheramine is a difunctional, primary amine with average molecular weight of about 2000. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains. It is a key ingredient in the formulation of polyruea and RIM, and can be used as a co-reactant in epoxy systems which require increased flexibility and toughness. view less | |
| JEFFAMINE® D-205 Amine | Huntsman Performance Products | JEFFAMINE® D-205 Amine, a newer polyetherdiamine, is designed to provide a slower epoxy curing speed and a lower exotherm than conventional polyetheramines but with similar glass transition temperature and cured resin mechanical properties. It is suited f...view more JEFFAMINE® D-205 Amine, a newer polyetherdiamine, is designed to provide a slower epoxy curing speed and a lower exotherm than conventional polyetheramines but with similar glass transition temperature and cured resin mechanical properties. It is suited for applications where a low viscosity and a longer pot-life are desirable. view less | |
| JEFFAMINE® D-230 Polyoxypropylenediamine | Huntsman Performance Products | JEFFAMINE® D-230 Polyoxypropylenediamine is most significantly useful as an epoxy curing agent. Its used in leads to give tough, clear, impact-resistant coatings, castings, and adhesives. | |
| JEFFAMINE® D-400 Polyoxypropylenediamine | Huntsman Performance Products | JEFFAMINE® D-400 Polyoxypropylenediamine is a Amine-terminated polyoxypropylene diol that can be used in protective and decorative epoxy coatings. | |
| JEFFAMINE® D-4000 Polyetherdiamine | Huntsman Performance Products | JEFFAMINE® D-4000 Polyetherdiamine is an amine-terminated polyoxypropylene diol with a higher molecular weight. | |
| JEFFAMINE® ED-2003 Polyetherdiamine | Huntsman Performance Products | JEFFAMINE® ED-2003 Polyetherdiamine is a polyether diamine of approximately 2000 molecular weight based on a predominantly polyethylene oxide backbone. It imparts flexibility, water solubility and hydrophilicity. | |
| JEFFAMINE® ED-600 Polyetherdiamine | Huntsman Performance Products | JEFFAMINE® ED-600 Polyetherdiamine is a polyether diamine of approximately 2000 molecular weight based on a predominantly polyethylene oxide backbone. It imparts flexibility, water solubility and hydrophilicity. | |
| JEFFAMINE® ED-900 Polyetherdiamine | Huntsman Performance Products | JEFFAMINE® ED-900 Polyetherdiamine is a polyether diamine of approximately 900 molecular weight based on a predominantly polyethylene oxide backbone. It imparts flexibility and hydrophilicity. | |
| JEFFAMINE® EDR-148 Polyetherdiamine | Huntsman Performance Products | JEFFAMINE® EDR-148 Polyetherdiamine is a symmetrical, unhindered reactive polyetherdiamine. As an epoxy curing agent, it provides moderately rapid cures, and cured resins with good mechanical properties and excellent impact and thermal shock resistance. | |
| JEFFAMINE® EDR176 Polyetherdiamine | Huntsman Performance Products | JEFFAMINE® EDR176 Polyetherdiamine is a relatively low molecular weight, reactive polyetherdiamine. As an epoxy curing agent, it provides moderately rapid cures, and cured resins with good mechanical properties and excellent impact and thermal shock resis...view more JEFFAMINE® EDR176 Polyetherdiamine is a relatively low molecular weight, reactive polyetherdiamine. As an epoxy curing agent, it provides moderately rapid cures, and cured resins with good mechanical properties and excellent impact and thermal shock resistance. view less | |
| JEFFAMINE® M-1000 Polyether Monoamine | Huntsman Performance Products | JEFFAMINE® M-1000 Polyether Monoamine is a hydrophilic polyether monoamine of approximately 1000 molecular weight. It is a white waxy solid at room temperature, with moderate viscosity, low vapour pressure and low colour. | |
| JEFFAMINE® M-2005 Polyether Monoamine | Huntsman Performance Products | JEFFAMINE® M-2005 Polyether Monoamine is a moderately hydrophobic polyether monoamine of approximately 2000 molecular weight. It is a liquid at room temperature, with moderate viscosity and low vapour pressure, and is essentially colourless. | |
| JEFFAMINE® M-2070 Polyether Monoamine | Huntsman Performance Products | JEFFAMINE® M-2070 Polyether Monoamine is a relatively hydrophilic polyether monoamine of approximately 2000 molecular weight. It is a liquid at room temperature, with moderate viscosity and low vapour pressure, and is essentially colourless. | |
| JEFFAMINE® M-600 Polyether Monoamine | Huntsman Performance Products | JEFFAMINE® M-600 Polyether Monoamine is a moderately hydrophilic polyether monoamine of approximately 600 molecular weight. It is a low-colour, mobile liquid at room temperature. | |
| JEFFAMINE® RFD-270 AMINE | Huntsman Performance Products | JEFFAMINE® RFD-270 amine, having an average formula weight of about 270, is a novel aliphatic amine containing both rigid (cycloaliphatic) and flexible (polyetheramine) segments in the same molecule. | |
| JEFFAMINE® SD-2001 Polyetheramine | Huntsman Performance Products | JEFFAMINE® SD-2001 polyetheramine is a liquid difunctional amine, with each amine being secondary. Applications include acting as a chain extender for polyureas and polyurethanes and inclusion in isocyanate prepolymer formations with benefits of low colou...view more JEFFAMINE® SD-2001 polyetheramine is a liquid difunctional amine, with each amine being secondary. Applications include acting as a chain extender for polyureas and polyurethanes and inclusion in isocyanate prepolymer formations with benefits of low colour and viscosity, slower reaction times than primary amines and lower viscosity isocyanate prepolymers. view less | |
| JEFFAMINE® T-3000 Polyethertriamine | Huntsman Performance Products | JEFFAMINE® T-3000 Polyethertriamine is a polyoxypropylenetriamine of approximately 3000 molecular weight. It is a clear, almost colourless, liquid product having medium viscosity and very low vapour pressure. | |
| JEFFAMINE® T-403 Polyoxypropylenetriamine | Huntsman Performance Products | JEFFAMINE® T-403 Polyoxypropylenetriamine is a trifunctional primary amine used primarily in epoxies, where it has certain advantages including good chemical resistance and minimized B-staging. | |
| JEFFAMINE® T-5000 Polyoxypropylenediamine | Huntsman Performance Products | JEFFAMINE® T-5000 Polyoxypropylenediamine is a trifunctional primary polyetheramine of approximately 5000 molecular weight used as crosslinker for polyurea, co-reactant in epoxy systems where adhesion promotion and flexibility are important. | |
| JEFFAMINE® THF-100 | Huntsman Performance Products | JEFFAMINE® THF-100 is a diamine of approximately 1000 molecular weight, based on a PTMEG [poly(tetramethylene ether glycol)]/PPG (polypropylene glycol) copolymer, effective in providing improved adhesion and flexibility, also at low temperatures. | |
| JEFFAMINE® THF-170 | Huntsman Performance Products | JEFFAMINE® THF-170 is a triamine of approximately 1700 molecular weight, based on a PTMEG [poly(tetramethylene ether glycol)]. It is effective in providing improved adhesion and flexibility, also at low temperatures. | |
| JEFFLINK® 136 Diamine | Huntsman Performance Products | JEFFLINK® 136 Diamine is a cycloaliphatic bis(secondary amine) chain extender for light-stable polyurea or polyurethane spray elastomer and coating systems where a slower reaction of amines is desirable. | |
| JEFFSOL® Butylene Carbonate | Huntsman Performance Products | JEFFSOL® Butylene Carbonate is an excellent solvent for many organic and inorganic materials for applications such as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder...view more JEFFSOL® Butylene Carbonate is an excellent solvent for many organic and inorganic materials for applications such as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder for foundry sand moulds. view less | |
| JEFFSOL® Ethylene Carbonate | Huntsman Performance Products | JEFFSOL® Ethylene Carbonate is an excellent solvent for many organic and inorganic materials in such applications as surface coatings, dyes, fibers, plastics, and batteries. It is also an excellent reactive intermediate for selective alkoxylation, transes...view more JEFFSOL® Ethylene Carbonate is an excellent solvent for many organic and inorganic materials in such applications as surface coatings, dyes, fibers, plastics, and batteries. It is also an excellent reactive intermediate for selective alkoxylation, transesterification, and carbamate formation. view less | |
| JEFFSOL® Glycerine Carbonate | Huntsman Performance Products | JEFFSOL® Glycerine Carbonate is a renewable, hydroxyl-functional carbonate having a biobased content of about 76%. Its hydroxyl functionality allows it to participate in a number of reactive processes in addition to the already exhaustive list for which s...view more JEFFSOL® Glycerine Carbonate is a renewable, hydroxyl-functional carbonate having a biobased content of about 76%. Its hydroxyl functionality allows it to participate in a number of reactive processes in addition to the already exhaustive list for which simple alkyl-substituted alkylene carbonates find use. view less | |
| JEFFSOL® MCH | Huntsman Performance Products | JEFFSOL® MCH (Methylcyclohexane) is a cycloaliphatic hydrocarbon solvent with physical properties reminiscent of aromatic solvents such as toluene. | |
| JEFFSOL® Propylene Carbonate | Huntsman Performance Products | JEFFSOL® Propylene Carbonate is an excellent solvent for many organic and inorganic materials in such applications as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder...view more JEFFSOL® Propylene Carbonate is an excellent solvent for many organic and inorganic materials in such applications as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder for foundry sand moulds. view less | |
| SOLVENT 1581 | Huntsman Performance Products | Solvent 1581 is a halogen-free, non-toxic and low-VOC solvent system, with high solvency power, developed for use in cleaning applications. It may be used in place N-methyl-2-pyrrolodone (NMP), tetrahydrofuran (THF), acetone, or other toxic or dangerous ...view more Solvent 1581 is a halogen-free, non-toxic and low-VOC solvent system, with high solvency power, developed for use in cleaning applications. It may be used in place N-methyl-2-pyrrolodone (NMP), tetrahydrofuran (THF), acetone, or other toxic or dangerous solvents to remove liquid paints or uncured components from a substrate where the components are used in the preparation of a paint or coating formulation. Solvent 1581 can be used to remove liquid epoxy or partially cured epoxy from application tools, mixers, brushes, or for the flushing of lines. Solvent 1581 may also be used as diluent in paints, coatings and adhesives formulations view less | |
| Tetraethylenepentamine (TEPA) | Huntsman Performance Products | Tetraethylenepentamine (TEPA) is principally a mixture of four TEPA ethyleneamines with close boiling points including linear, branched, and two cyclic TEPA products, and higher molecular weight products. | |
| Triethylenetetramine (TETA) | Huntsman Performance Products | Triethylenetetramine is a mixture of four TETA ethyleneamines with close boiling points including linear, branched and two cyclic molecules. | |
| XTA-801 Amine | Huntsman Performance Products | XTA-801 Amine is a new highly reactive cycloaliphatic amine epoxy curing agent providing fast curing, and enhanced glass transition temperature, chemical resistance, modulus and hardness performance. Suitable for use in both ambient and heat curing applic...view more XTA-801 Amine is a new highly reactive cycloaliphatic amine epoxy curing agent providing fast curing, and enhanced glass transition temperature, chemical resistance, modulus and hardness performance. Suitable for use in both ambient and heat curing applications. view less | |
| 1K WB Say Clearcoat DTM - Waterborne Acrylic Clear-Coat Based on MAINCOTE HG100, ASCONIUM® 142DA and ASCOTRAN® H10 (Formulation #00002-A) | ASCOTEC | Based on MAINCOTE HG-100. | |
| Casting and Encapsulation | Huntsman Performance Products | An encapsulated object is totally enclosed in some medium. Potting usually refers to a system in which there is a container around an encapsulated part. A casting has no container, but may be poured into a void, such as a mould, and then removed after com...view more An encapsulated object is totally enclosed in some medium. Potting usually refers to a system in which there is a container around an encapsulated part. A casting has no container, but may be poured into a void, such as a mould, and then removed after complete curing. view less | |
| Coal Tar Epoxy | Huntsman Performance Products | Coal tar-modified epoxy coatings are frequently used to line water tanks and to coat bridges, decks, and pipelines. They offer corrosion protection from water, acids, alkalies, salts, and some solvents. | |
| Decorative Aggregate | Huntsman Performance Products | Decorative, or bonded, aggregate refers to composites made by mixing together gravel of various sizes and colours with an unpigmented epoxy system. The epoxy mix is blended with the rock at a 5 to 6 wt.% level and formed into various shapes or troweled in...view more Decorative, or bonded, aggregate refers to composites made by mixing together gravel of various sizes and colours with an unpigmented epoxy system. The epoxy mix is blended with the rock at a 5 to 6 wt.% level and formed into various shapes or troweled into place much like concrete. view less | |
| Decoupage Coating | Huntsman Performance Products | A popular application for epoxies is in decoupage-type coatings where objects such as wooden plaques, clocks, pictures and signs are coated with a high-gloss finish. | |
| High-Gloss WB White DTM (Formulation #WBACRY7358) | ASCOTEC | White High Gloss Waterborne Acrylic DTM Paint based on Pliotec® HDT16, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| High-Gloss WB White DTM (Formulation #WBACRY7625) | ASCOTEC | White High Gloss Waterborne Styrene Acrylic DTM Paint based on Neocryl® XK85, ASCONIUM® 143 and ASCOTRAN® H10. | |
| High-Solids Epoxy | Huntsman Performance Products | Because of increasing concern for the environment and stricter governmental regulations, high-solids (i.e., low-solvent) coatings have gained importance. By using the JEFFAMINE® products in combination with the polyamides, in effect as reactive diluents, ...view more Because of increasing concern for the environment and stricter governmental regulations, high-solids (i.e., low-solvent) coatings have gained importance. By using the JEFFAMINE® products in combination with the polyamides, in effect as reactive diluents, the coatings formulator may reduce solvent levels and still maintain flexibility and other necessary coating properties. view less | |
| Neocryl XK-117® Water-based White Glossy Coating for Direct to Metal (Formulation #M-60-117XK) | ASCOTEC | Neocryl XK-117® is a water-based white glossy coating for direct to metal. | |
| Non-Yellowing Varnish | Huntsman Performance Products | Clear coatings based on standard aromatic-based epoxy resins do not hold up well in sunlight. However, solventless coatings of low viscosity having improved U.V. light stability can be formulated from hydrogenated DGEBA type resins, which are nonaromatic. | |
| Organic Zinc Rich Primer | Huntsman Performance Products | Zinc primers, developed to protect structural steel, offer excellent corrosion resistance when used either as preconstruction primers or as top-coated primers. | |
| Polymer Concrete | Huntsman Performance Products | Polymer concretes are known for the improvements in strength, durability, and protection they offer over conventional portland cement concrete (PCC). Unlike polymer-modified PCC, which uses cement and water as a binder, polymer concrete uses an organic re...view more Polymer concretes are known for the improvements in strength, durability, and protection they offer over conventional portland cement concrete (PCC). Unlike polymer-modified PCC, which uses cement and water as a binder, polymer concrete uses an organic resin matrix as the "glue" to hold the aggregate together in place of the cementitous binder. view less | |
| Protective Rust-Converting Clear-Coating (Formulation #WBACRY700RF1) | ASCOTEC | Waterborne Acrylic Rust Converting Clear Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| Reinforced Composites | Huntsman Performance Products | Cured epoxy resins are ideal agents for bonding reinforcing fibers of all kinds, notably glass, graphite, and synthetics. The term “advanced” composites is sometimes used to distinguish composites in which reinforcing fibers are continuous instead of chop...view more Cured epoxy resins are ideal agents for bonding reinforcing fibers of all kinds, notably glass, graphite, and synthetics. The term “advanced” composites is sometimes used to distinguish composites in which reinforcing fibers are continuous instead of chopped. Cured epoxy resins are used as matrix resins for advanced composites in a variety of applications. view less | |
| Reinforced Composites - Boats | Huntsman Performance Products | Quality boats - racing sailboats, kayaks, canoes - are ideal subjects for epoxy systems cured with JEFFAMINE® polyetheramines. | |
| Reinforced Composites - Boats - Accelerator 399 Adjustment | Huntsman Performance Products | The amount of the Accelerator 399 can be adjusted to obtain the desired pot life. Of course, for longest pot life, no accelerator is used at all, and the system below may be useful for fabrication techniques such as vacuum bagging where longer working tim...view more The amount of the Accelerator 399 can be adjusted to obtain the desired pot life. Of course, for longest pot life, no accelerator is used at all, and the system below may be useful for fabrication techniques such as vacuum bagging where longer working time is desirable. view less | |
| Reinforced Composites - Filament-Wound Tanks and Piping | Huntsman Performance Products | The attached formulation has been suggested by workers at the Lawrence Livermore Laboratory for the manufacture of filament-wound objects, such as tanks. | |
| Reinforced Composites - Wind Turbine Blades | Huntsman Performance Products | Reinforced composites are ideal materials for replacing metals in the construction of blades that spin to propel aircrafts or generate electricity. | |
| Rust-Converting Red Primer (Formulation #WBACRY158R1) | ASCOTEC | Red Waterborne Styrene Acrylic Rust Converting Primer based on Neocryl® XK87, ASCONIUM® 143, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| Sand-Filled Flooring | Huntsman Performance Products | Floors of this type, where an epoxy matrix is used to bind sand and/or other pigment-like fillers into a monolithic floor surface, are very popular, especially for industrial areas. Systems can be formulated to give good abrasion resistance, high impact c...view more Floors of this type, where an epoxy matrix is used to bind sand and/or other pigment-like fillers into a monolithic floor surface, are very popular, especially for industrial areas. Systems can be formulated to give good abrasion resistance, high impact capacity, easy maintenance, and good chemical resistance. view less | |
| Seamless Floors - Harder Glaze | Huntsman Performance Products | Epoxies are eminently suitable for seamless, poured-in-place floors. | |
| Seamless Floors - Pigmented Base Coat | Huntsman Performance Products | Epoxies are eminently suitable for seamless, poured-in-place floors. | |
| Trowel Coatings | Huntsman Performance Products | A formulation useful for coating concrete surfaces, bonding old concrete surfaces to new, topping floors subjected to heavy wear, and coating splash-zone areas of marine structures is given below. The material is thixotropic, so it can be applied to verti...view more A formulation useful for coating concrete surfaces, bonding old concrete surfaces to new, topping floors subjected to heavy wear, and coating splash-zone areas of marine structures is given below. The material is thixotropic, so it can be applied to vertical surfaces where it may be used to imbed aggregate. view less | |
| Water-Based White DTM (Formulation #WBACRY11405W) | ASCOTEC | CRILAT 4747 WITH ASCONIUM®-500. | |
| Waterborne Clear-Coating (Formulation #WBPU1004T) | ASCOTEC | Waterborne Polyurethane Clear Coating based on Esacote® PU61, ASCONIUM® 114 and ASCOTRAN® H10. | |
| Waterborne Clear-Coating (Formulation #WBPU821) | ASCOTEC | Waterborne Polyurethane Clear Coating based on Esacote® PU77, ASCONIUM® 114 and ASCOTRAN® H10. | |
| Waterborne Grey Primer (Formulation #WBACRY8728) | ASCOTEC | Grey Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne Red Primer (Formulation #WBACRY8730) | ASCOTEC | Red Waterborne Styrene Acrylic Primer based on Neocryl® XK801, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM Based on WORLEESOL VP E 320W With ASCONIUM® 111 (Formulation #WBALKYDUY1302W) | ASCOTEC | White waterborne Alkyd-Urethane DTM based on Worleesol® VP E 320W, ASCONIUM® 111 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #ORGAL F6560 – 01-24) | ASCOTEC | White waterborne Acrylic DTM based on ORGAL F 6560, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY2033) | ASCOTEC | White Waterborne Styrene Acrylic DTM Paint based on Carboset® CR765, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY445) | ASCOTEC | White Waterborne Acrylic DTM Paint based on Maincote® 1100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY6999) | ASCOTEC | White Waterborne Acrylic DTM Paint based on EPS 595, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY799-389W) | ASCOTEC | White Waterborne Acrylic DTM Paint based on ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBACRY8111) | ASCOTEC | White Waterborne Styrene Acrylic DTM Paint based on Maincote® HG100, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBALKY404) | ASCOTEC | White Waterborne Alkyd DTM Paint based on Inokem® 3301, ASCONIUM® 114 and ASCOTRAN® H10. | |
| Waterborne White DTM (Formulation #WBALKY802) | ASCOTEC | White Waterborne Alkyd DTM Paint based on Inokem® 3304, ASCONIUM® 114 and ASCOTRAN® H10. |
