| Deuterol Paraffindispersion | Deuteron | Deuterol Paraffindispersion is used as a matting additive in water dilutable polyester systems. It produces a continuous uniform paraffin film in water dilutable systems. Deuterol Paraffindispersion has been designed to be used in water dilutable polye...view more Deuterol Paraffindispersion is used as a matting additive in water dilutable polyester systems. It produces a continuous uniform paraffin film in water dilutable systems. Deuterol Paraffindispersion has been designed to be used in water dilutable polyester systems for coating of wood surfaces. It can also be used in other water dilutable systems. Effectiveness and compatibility need to be checked for each application. view less | Request Sample |
| Deuteron MK | Deuteron | Deuteron MK is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueou...view more Deuteron MK is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
| Deuteron MK-F | Deuteron | Deuteron MK-F is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aque...view more Deuteron MK-F is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
| Deuteron MK-F6 | Deuteron | Deuteron MK-F6 is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqu...view more Deuteron MK-F6 is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
| Deuteron MM 659 | Deuteron | Deuteron MM 659 reduces the gloss in some coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. Spoiling of the transparency in UV-curing la...view more Deuteron MM 659 reduces the gloss in some coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. Spoiling of the transparency in UV-curing lacquers is not possible due to the favorable composition of Deuteron MM 659. The obtained coating surfaces show excellent resistance regarding burnishing and mar resistance. The use of Deuteron MM 659 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. A reaction between matting agent and lacquer system and therefore a spoiling of the storage stability has not been noticed. view less | Request Sample |
| Deuteron MM 669 | Deuteron | Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. When using Deuteron MM 669 in UV-curing binders ...view more Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. When using Deuteron MM 669 in UV-curing binders no cloudiness has been noticed. The surfaces of coatings show excellent resistance to burnishing and mar resistance. Deuteron MM 669 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. view less | Request Sample |
| Deuteron MM 677 | Deuteron | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and furniture lacquers, printing inks and industrial finishes (air-drying and stoving enamels). ...view more Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and furniture lacquers, printing inks and industrial finishes (air-drying and stoving enamels). In comparison with powdery matting agents Deuteron MM 677 particularly offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. view less | Request Sample |
| Deuteron MM 680 | Deuteron | Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems. Deuteron MM 680 is a mixture of finest-groun...view more Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems. Deuteron MM 680 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing. Deuteron MM 680 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. view less | Request Sample |
| Deuteron MM 682 | Deuteron | Deuteron MM 682 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 682 can be used in a variety of applications, preferably in pigmented paints and lacquers. ...view more Deuteron MM 682 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 682 can be used in a variety of applications, preferably in pigmented paints and lacquers. The matting effect induced with Deuteron MM 682 is highly resistant to mechanical influences ("polishing" or abrasion). Deuteron MM 682 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. view less | Request Sample |
| Deuteron MM 684 | Deuteron | Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers. ...view more Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers. Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing. Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. view less | Request Sample |
| Deuteron PMH C | Deuteron | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings. Deuteron PMH C can be used as a matt...view more Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, radiation curing varnishes with the additional use of SiO2. With its favorable oil absorption value the product is predestinated for coatings with high flexibility, e.g. coil coatings and leather finishes. view less | Request Sample |
| Deuteron PMH F | Deuteron | Deuteron PMH F is a fine micronized, pure thermoset with a compact particle structure. Due to the fineness the products can be used as a matting additives in many applications in varnishes and coatings. | Request Sample |
| Deuteron PMH M | Deuteron | Deuteron PMH M is a fine micronized, pure thermoset with a compact particle structure. Due to the fineness the products can be used as a matting additives in many applications in varnishes and coatings. | Request Sample |
| Deuteron SO 100 | Deuteron | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the recoatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 300 | Deuteron | Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and...view more Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is temperature resistant up to 160°C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the recoatability. In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is intended for all water-based lacquers, coatings and printing inks which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 302 | Deuteron | Deuteron SO 302 is a dispersion of an elastomer in water corresponding to Deuteron SO 300, however with considerably larger particle size distribution. It lends the coating a rough, soft-touch-surface. It also acts as a matting agent. | Request Sample |
| Deuteron SO 500 | Deuteron | Deuteron SO 500 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the syst...view more Deuteron SO 500 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the recoatability. In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is intended for all solvent-based coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 510 | Deuteron | Deuteron SO 510 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the syst...view more Deuteron SO 510 is a fine dispersion of an elastomer. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. view less | Request Sample |
| Deuteron UV RM10 | Deuteron | Deuteron UV RM10 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. Delivery as a paste allows easy, powder-free handling. The matting efficiency of the additives is largely independent from the coating‘s film thickness...view more Deuteron UV RM10 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. Delivery as a paste allows easy, powder-free handling. The matting efficiency of the additives is largely independent from the coating‘s film thickness. view less | Request Sample |
| Deuteron UV RM15 | Deuteron | Deuteron UV RM15 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. | Request Sample |
| Deuteron UV RM17 | Deuteron | Deuteron UV RM17 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. | Request Sample |
| Deuteron UV RM19 | Deuteron | Deuteron UV RM19 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. Deuteron UV RM19 contains TMPEOTA, a more reactive base compared to our other UV RM-prod...view more Deuteron UV RM19 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling. Deuteron UV RM19 contains TMPEOTA, a more reactive base compared to our other UV RM-products. view less | Request Sample |
| Deuteron UV RMP | Deuteron | Deuteron UV RMP is primarily suited for matting radical curing 100% UV systems. The effect is based on a partial incompatibility that disrupts the even formation of the surface during curing. This creates a rough surface that causes highly diffuse light d...view more Deuteron UV RMP is primarily suited for matting radical curing 100% UV systems. The effect is based on a partial incompatibility that disrupts the even formation of the surface during curing. This creates a rough surface that causes highly diffuse light diffraction. view less | Request Sample |
| Deuteron UV RS20 | Deuteron | Deuteron UV RS20 improves the surface smoothness and the resistance to abrasion and scrubbing of UV coatings and printing inks. It gives the surfaces pleasant, silky-soft haptical properties. It is ideal for use in radically curing UV coatings and prin...view more Deuteron UV RS20 improves the surface smoothness and the resistance to abrasion and scrubbing of UV coatings and printing inks. It gives the surfaces pleasant, silky-soft haptical properties. It is ideal for use in radically curing UV coatings and printing inks, in particular for solvent-free systems. view less | Request Sample |
| Deuteron WAX A | Deuteron | Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion. Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal...view more Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion. Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent. Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. view less | Request Sample |
| Deuteron WAX MPO | Deuteron | Deuteron-WAX MPO is a micronized polyolefin wax characterized by a fine particle size distribution and good ease of dispersion. The use of Deuteron-WAX MPO also leads to excellent results in powder coatings. The dispersed wax shows resistance to set...view more Deuteron-WAX MPO is a micronized polyolefin wax characterized by a fine particle size distribution and good ease of dispersion. The use of Deuteron-WAX MPO also leads to excellent results in powder coatings. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. view less | Request Sample |
| Deuteron WAX PP | Deuteron | Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-W...view more Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP also leads to excellent results in powder coatings. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. view less | Request Sample |
| Deuteron WAX PP/2 | Deuteron | Deuteron-WAX PP/2 is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron...view more Deuteron-WAX PP/2 is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion. It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP/2 also leads to excellent results in powder coatings. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP/2 has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. view less | Request Sample |
| Pergopak M3 | Deuteron | Pergopak M3 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers ...view more Pergopak M3 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
| Pergopak M4 | Deuteron | Pergopak M4 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers ...view more Pergopak M4 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
