| ADDITOL® VXW 4926 | Allnex | ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions...view more ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions with water dilutable synthetic resins. view less | Request Sample |
| ADDITOL® VXW 4973 | Allnex | ADDITOL® VXW 4973 is a highly effective defoamer on mineral oil basis for foam prevention in plastic dispersions, emulsion paints, dispersion paints, dispersion adhesives and plastic renderings, without silicone addition. | Request Sample |
| ADDITOL® VXW 5907 | Allnex | ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varie...view more ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varies with the type of the water dilutable paint. view less | Request Sample |
| ADDITOL® VXW 6210 N | Allnex | ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterb...view more ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterborne paint systems. This product is recommended for mainly low and medium-viscosity paints, such as gloss and silky gloss emulsions paints, and coatings for parquet floors and furniture on the basis of acrylate and acrylate/polyurethane emulsions. view less | Request Sample |
| ADDITOL® VXW 6211 | Allnex | ADDITOL® VXW 6211 is a defoamer for emulsion paints, especially for adhesives, which meets the requirements of the Federal Health Administration. | Request Sample |
| ADDITOL® VXW 6235 | Allnex | ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives...view more ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives. view less | Request Sample |
| ADDITOL® VXW 6386 | Allnex | ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based...view more ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based on waterdilutable alkyd-resin, gloss- and semigloss dispersion paint. view less | Request Sample |
| ADDITOL® VXW 6393 | Allnex | ADDITOL® VXW 6393 is a defoamer based on mineral spirits to prevent foam, without silicone addition. It was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. | Request Sample |
| ADDITOL® WT 100 DF-M | Allnex | ADDITOL® WT 100 DF-M is a water and waste water treatment defoamer. Mineral oil / wax – emulsion (50% active). For all WW treatment process stages. Highly compatible. Best cost – effective balance. | Request Sample |
| ADDITOL® WT 101 DF-S | Allnex | ADDITOL® WT 101 DF-S is a water and waste water treatment defoamer. Modified silicone defoamer emulsion (20% active). Emulsifier free technology. | Request Sample |
| ADDITOL® WT 102 DF-M | Allnex | ADDITOL® WT 102 DF-M is a water and waste water treatment defoamer. Highly refined mineral oil / wax defoamer (100% active). Improved foam lamella penetration for highly effective macro foam destruction. For all WW treatment process stages. | Request Sample |
| ADDITOL® WT 103 DF-S | Allnex | ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation uni...view more ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation units, membrane reactors). Highly effective at low dosages. view less | Request Sample |
| ADDITOL® XL 123 N | Allnex | Additol® XL 123 N is a flow agent and defoamer based on a modified silicone oil, for air drying and stoving coatings systems. | Request Sample |
| ADDITOL® XL 6507 | Allnex | ADDITOL® XL 6507 is a deairator/defoamer for solvent born paint systems. | Request Sample |
| ADDITOL® XL 6531 | Allnex | Additol® XL 6531 is a solution of defoaming polymers without silicone. Suggested applications are industrial coatings, 2 comp. acrylic/isocyanate systems, unsaturated technical polyester resins and gel coats. | Request Sample |
| ADDITOL® XW 372 N | Allnex | Additol® XW 372 N is a high-efficiency defoamer for waterborne dispersions, interior and exterior emulsion paints. | Request Sample |
| ADDITOL® XW 376 | Allnex | Additol® XW 376 is a defoamer for waterborne emulsion paints and adhesives, and synthetic resin-bound renderings. | Request Sample |
| ADDITOL® XW 393 | Allnex | ADDITOL® XW 393 is a antifoam for waterborne paint systems, without silicone addition. | Request Sample |
| ADDITOL® XW 6544 | Allnex | Additol® XW 6544 is a low-VOC defoamer based on hydrophobic modified polymers, without silicone addition. It prevents foam formation and reduces pinholes in high film thickness due to optimized reflow properties. | Request Sample |
| ADDITOL® XW 6567 | Allnex | Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects ...view more Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects formed during the mechanical crimping process. It is also recommended in all other coating types requiring food compliance with EU and/or US regulations. view less | Request Sample |
| ADDITOL® XW 6569 | Allnex | ADDITOL® XW 6569 is a modified silicone based defoamer. It is emulsifier-free with no influence on rheology modifiers and resin stability. This highly effective defoamer is easy to incorporate into all waterborne paint systems. | Request Sample |
| ADDITOL® XW 6584 | Allnex | ADDITOL® XW 6584 is an easy to incorpoate defoamer with good compatibility in all waterborne systems. | Request Sample |
| ADDITOL® XW 6585 | Allnex | ADDITOL® XW 6585 is an easy to incorpoate defoamer with good compatibility in all waterborne systems. | Request Sample |
| ADDITOL® XW 6586 | Allnex | ADDITOL® XW 6585 is a very versatile polysiloxane based surface additive that can be used in a wide range of liquid industrial and architectural coatings as well a in printing inks and overprint varnishes based on radiation curing technology. It can be us...view more ADDITOL® XW 6585 is a very versatile polysiloxane based surface additive that can be used in a wide range of liquid industrial and architectural coatings as well a in printing inks and overprint varnishes based on radiation curing technology. It can be used in systems where FDA approval is needed. view less | Request Sample |
| PC 1644™ Defoamer | Allnex | PC-1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC-1244® in non-aqueous organic fluids. PC-1644™ is a general purpose defoamer which offers superior foam co...view more PC-1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC-1244® in non-aqueous organic fluids. PC-1644™ is a general purpose defoamer which offers superior foam control at low use levels, generally 10 to 20 % lower use level versus PC-1244®. PC-1644™ is silicone-free and exhibits very low odor. view less | Request Sample |
| PC-1244™ Defoamer | Allnex | PC-1244® Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has d...view more PC-1244® Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1244® contains no silicone. PC-1244® Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine and transmission oils. view less | Request Sample |
| PC-1344™ Defoamer | Allnex | PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an abili...view more PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1344™ contains no silicone. PC-1344™ Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine, or transmission oils. view less | Request Sample |
| PC-1844™ Defoamer | Allnex | PC-1844® Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844® is recommended for high performance usage where PC-1244®, PC-1644®, or silicone defoame...view more PC-1844® Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844® is recommended for high performance usage where PC-1244®, PC-1644®, or silicone defoamers do not give adequate performance. These usages include gear oils, specialty lubricants, shock absorber, hydraulic, turbine and transmission oils. view less | Request Sample |
| PC-2544™ Defoamer | Allnex | PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty appl...view more PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty applications where efficient high temperature performance is required. view less | Request Sample |
| PC-3144® Defoamer | Allnex | PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB...view more PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well. view less | Request Sample |
| PC-4144-DEFOAMER | Allnex | PC-4144 is a highly efficient defoamer for metal working fluids and metal working fluid emulsions with very low VOC content ( Active substance approx. 100 % \r\n\r\n. | Request Sample |
