| ANTI-TERRA®-203 | BYK | ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging te...view more ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-204 | BYK | ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixot...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-205 | BYK | ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides. | |
| ANTI-TERRA®-250 | BYK | ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the ...view more ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction. view less | |
| ANTI-TERRA®-U | BYK | ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of uns...view more ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of unsaturated polyamine amides and lower molecular weight acidic polyesters. view less | |
| ANTI-TERRA®-U 100 | BYK | ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERR...view more ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and inorganic. No adverse effect has been observed on the pot-life of two-component systems or on the dry time of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive in water soluble coatings. view less | |
| BYK®-300 | BYK | BYK®-300 is a solution of a polyether modified polydimethylsiloxane. This product is a standard surface additive in the coatings industry for all solvent-borne systems. | |
| BYK®-306 | BYK | BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...view more BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. view less | |
| BYK®-333 | BYK | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less | |
| BYK®-345 | BYK | BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilizatio...view more BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. view less | |
| BYK®-3450 | BYK | BYK®-3450 is a silicone surfactant for aqueous printing inks and overprint varnishes, inkjet inks, aqueous coatings, adhesives, and care products providing a significant reduction in surface tension. Particularly suitable for improving the wetting of aque...view more BYK®-3450 is a silicone surfactant for aqueous printing inks and overprint varnishes, inkjet inks, aqueous coatings, adhesives, and care products providing a significant reduction in surface tension. Particularly suitable for improving the wetting of aqueous systems on very non-polar substrates. Does not increase the surface slip. view less | |
| BYK®-3451 | BYK | BYK®-3451 is a silicone surfactant for aqueous printing inks and overprint varnishes, inkjet inks, aqueous coatings, adhesives, and care products providing a significant reduction in surface tension. Particularly suitable for improving the wetting of aque...view more BYK®-3451 is a silicone surfactant for aqueous printing inks and overprint varnishes, inkjet inks, aqueous coatings, adhesives, and care products providing a significant reduction in surface tension. Particularly suitable for improving the wetting of aqueous systems on very non-polar substrates. Does not increase the surface slip. view less | |
| BYK®-3456 | BYK | BYK®-3456 is a fluorine-free, silicone-containing additive for improving substrate wetting and leveling in aqueous systems and solvent-free UV coatings. | |
| BYK®-346 | BYK | BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...view more BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. view less | |
| BYK®-347 | BYK | BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...view more BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. view less | |
| BYK®-348 | BYK | BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...view more BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. view less | |
| BYK®-3480 | BYK | BYK®-3480 is a 100% silicone surfactant for aqueous systems to improve substrate wetting by means of a strongly reduced surface tension in the liquid coating. Excellent defoaming properties and anti-cratering effect combined with good leveling properties;...view more BYK®-3480 is a 100% silicone surfactant for aqueous systems to improve substrate wetting by means of a strongly reduced surface tension in the liquid coating. Excellent defoaming properties and anti-cratering effect combined with good leveling properties; particularly suitable for pigmented systems. view less | |
| BYK®-3481 | BYK | BYK®-3481 is a 100% silicone surfactant for aqueous systems to improve substrate wetting by means of a strongly reduced surface tension in the liquid coating. Excellent defoaming properties and anti-cratering effect combined with good leveling properties,...view more BYK®-3481 is a 100% silicone surfactant for aqueous systems to improve substrate wetting by means of a strongly reduced surface tension in the liquid coating. Excellent defoaming properties and anti-cratering effect combined with good leveling properties, particularly suitable for clearcoats. view less | |
| BYK®-349 | BYK | BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...view more BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. view less | |
| BYK®-3550 | BYK | BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Dependi...view more BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Depending on the polarity of the system, BYK®-3550 shows different properties. In polar systems the additive shows an excellent compatibility in the coating, which leads to a homogeneous distribution in the film. view less | |
| BYK-3560 | BYK | BYK-3560 is a silicone-free and fluorine-free surface additive for increasing the surface energy in aqueous, solvent-borne, UV-curable, and high-solid systems. It increases the surface energy of cured coatings overall, especially the polarity. This enable...view more BYK-3560 is a silicone-free and fluorine-free surface additive for increasing the surface energy in aqueous, solvent-borne, UV-curable, and high-solid systems. It increases the surface energy of cured coatings overall, especially the polarity. This enables the improved adhesion of subsequent layers such as paint, laminating foils, adhesives, and printing inks. The cured coating is also wetted more effectively, producing an excellent leveling of the subsequent coating. In addition, BYK-3560 also improves the leveling of the system in which it is being used. view less | |
| BYK®-370 | BYK | BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethan...view more BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine, self-crosslinking acrylates, and epoxies. BYK-370 increases the surface slip. view less | |
| BYK-375 | BYK | BYK-375 is a silicone surface additive for aqueous systems. It is hydroxy-functional and imparts medium reduction of surface tension. | |
| BYK®-3751 | BYK | BYK®-3751 is a silicone surface additive for solvent-borne and aqueous systems with a medium reduction in surface tension. | |
| BYK-3942 P | BYK | BYK-3942 P is an adhesion promoter and substrate-wetting additive for powder coatings with substrate-affinity adhesive groups for critical substrates. | |
| BYK®-DYNWET 800 | BYK | BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting. | |
| BYK®-P 104 | BYK | BYK®-P 104 is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer. This product is suitable for medium to high polar systems and particularly effective in preven...view more BYK®-P 104 is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer. This product is suitable for medium to high polar systems and particularly effective in preventing flooding of titanium dioxide in combination with other color pigments. It is also used in amine-neutralized aqueous coatings; it is not compatible with mineral spirits. When used in anti-corrosion primers, in many cases the protective properties are enhanced. view less | |
| BYK®-P 104 S | BYK | BYK®-P 104 S is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer and a polysiloxane copolymer. This product can be used in the same systems as BYK-P 104. The ...view more BYK®-P 104 S is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer and a polysiloxane copolymer. This product can be used in the same systems as BYK-P 104. The additive also contains a small amount of a polysiloxane copolymer to more effectively avoid flooding. This silicone content is additionally helpful in preventing Bénard cells and silking, and also improves surface slip, leveling and orientation of flatting agents or aluminium flakes. Therefore it is oftentimes not necessary to add a separate dosage of an otherwise needed silicone additive. view less | |
| BYK®-P 105 | BYK | BYK®-P 105 is a wetting and dispersing additive for solvent-borne systems. It is a lower molecular weight unsaturated polycarboxylic acid polymer. This product is the solvent-free version of BYK-P 104. These additives lead to a controlled flocculation of ...view more BYK®-P 105 is a wetting and dispersing additive for solvent-borne systems. It is a lower molecular weight unsaturated polycarboxylic acid polymer. This product is the solvent-free version of BYK-P 104. These additives lead to a controlled flocculation of pigments. "Bridges“ are formed between single pigment particles causing three-dimensional structures to develop. Through controlled flocculation of pigments, flooding and floating, settling, and sagging of pigments is avoided. view less | |
| BYK®-UV 3510 | BYK | BYK®-UV 3510 is a surface additive for radiation curing systems. It is a polyether modified polydimethylsiloxane. In non-aqueous systems BYK-UV 3510 improves substrate wetting and tape release as well as leveling, and increases surface slip. | |
| BYK®-UV 3530 | BYK | BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueou...view more BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueous radiation curable systems leveling is improved. The surface tension, foam behavior or transparency are scarcely influenced. view less | |
| BYK®-UV 3570 | BYK | BYK®-UV 3570 is a surface additive for radiation curable systems. It is a 70% solution of a polyester modified acrylic functional poly-dimethyl-siloxane in PONPGDA (propoxylated 2 neopentyl glycol diacrylate). This product exhibits, depending on the level...view more BYK®-UV 3570 is a surface additive for radiation curable systems. It is a 70% solution of a polyester modified acrylic functional poly-dimethyl-siloxane in PONPGDA (propoxylated 2 neopentyl glycol diacrylate). This product exhibits, depending on the level, controlled improvement of surface slip and allows easy surface slip adjustment. BYK-UV 3570 improves leveling, substrate wetting and orientation of flatting agents. It has a high acrylic functionality and is solvent-free. BYK-UV 3570 does not need to be labeled in accordance with EC-Directive 88/379/EWG and is nonhazardous as defined in ADR/RID, IMDG/IMO, ICAO/IATA regulations. view less | |
| BYK-W 9012 | BYK | BYK-W 9012 is a solvent-free wetting and dispersing additive for closed mold applications to reduce the viscosity and to improve the homogeneity of ATH-filled compounds. The additive reduces the compound viscosity which makes it possible to have a higher ...view more BYK-W 9012 is a solvent-free wetting and dispersing additive for closed mold applications to reduce the viscosity and to improve the homogeneity of ATH-filled compounds. The additive reduces the compound viscosity which makes it possible to have a higher filler content in the resin. The better wetting and dispersing of the fillers also leads to increased homogeneity of the compound and also improved batch reproducibility. view less | |
| BYK®-W 966 | BYK | BYK®-W 966 is the aromatic-free dilution of ANTI-TERRA U 100 in hydrocarbons. It is a wetting and dispersing additive for solvent-borne and solvent-free systems. It is recommended for architectural coatings, furniture coatings, and bentonite pastes. | |
| BYK®-W 969 | BYK | BYK®-W 969 is a wetting and dispersing additive with viscosity reducing properties in ambient curing resins. It is composed of a hydroxy functional alkylammonium salt of an acidic copolymer. It improves the wetting and dispersing rate of fillers during di...view more BYK®-W 969 is a wetting and dispersing additive with viscosity reducing properties in ambient curing resins. It is composed of a hydroxy functional alkylammonium salt of an acidic copolymer. It improves the wetting and dispersing rate of fillers during dispersion and reduces paste viscosity, such that higher filler loading is possible. Increased filler loading dramatically improves the sanding characteristics of putty compounds. BYK-W 969 has a strong effect on gel time in cobalt catalyzed unsaturated polyester formulations. view less | |
| BYKJET-9131 | BYK | BYKJET-9131 is a high molecular weight wetting and dispersing additive for solvent-borne inkjet inks. Recommended for all pigments. | |
| BYKJET-9132 | BYK | BYKJET-9132 is a high molecular weight wetting and dispersing additive for solvent-borne inkjet inks. It is particularly recommended for magenta, cyan and yellow pigments. | |
| BYKJET-9133 | BYK | BYKJET-9133 is a high molecular weight wetting and dispersing additive for solvent-borne inkjet inks. It is particularly recommended for carbon black pigments. | |
| BYKJET-9152 | BYK | BYKJET-9152 is a solvent-free wetting and dispersing additive for dispersing and stabilizing organic pigments and carbon blacks in solvent-borne, aqueous and UV-curable inkjet inks. It improves the optical properties of pigment-based inkjet inks (color st...view more BYKJET-9152 is a solvent-free wetting and dispersing additive for dispersing and stabilizing organic pigments and carbon blacks in solvent-borne, aqueous and UV-curable inkjet inks. It improves the optical properties of pigment-based inkjet inks (color strength, gloss, haze, transparency). The viscosity of the pigment concentrates and the finished inks is reduced and thixotropy is prevented. Good long-term stability is also achieved. The product produces an even particle size distribution in pigment dispersions, thereby significantly reducing the filtration time. BYKJET-9152 can be used in all types of aqueous, solvent-borne, and UV-curable inkjet inks. It stabilizes most pigments commonly used in inkjet products. view less | |
| BYKJET-9171 | BYK | BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content...view more BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content in pigment concentrates. It is particularly recommended for binder-free grinding. view less | |
| CERAFLOUR® 960 | BYK | CERAFLOUR® 960 is an additive for improved outgassing of powder coatings based on ß-hydroxyalkylamides. It is composed of micronized modified amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane ...view more CERAFLOUR® 960 is an additive for improved outgassing of powder coatings based on ß-hydroxyalkylamides. It is composed of micronized modified amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. The additive allows better degassing of powder coatings with ß-Hydroxyalkylamide hardeners and improves pigment wetting, leveling, and DOI. view less | |
| CERAFLOUR® 993 | BYK | CERAFLOUR® 993 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of micronized amide wax. This product is used in solvent-borne systems and powder coatings. | |
| CERAFLOUR® 994 | BYK | CERAFLOUR® 994 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of ultra fine micronized amide wax. This product is used in solvent-borne systems and powder coatings. | |
| CERAFLOUR® 994 For Powder | BYK | CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane...view more CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. view less | |
| DISPERBYK® | BYK | DISPERBYK® is a wetting and dispersing additive for solvent-borne and aqueous systems. It is a solution of an alkylolammonium salt of a lower molecular weight polycarboxylic acid polymer. This product is suitable for both aqueous and solvent-borne systems...view more DISPERBYK® is a wetting and dispersing additive for solvent-borne and aqueous systems. It is a solution of an alkylolammonium salt of a lower molecular weight polycarboxylic acid polymer. This product is suitable for both aqueous and solvent-borne systems. When added to the millbase of a white paint, it improves color acceptance and color development. In solvent-based and aqueous coatings DISPERBYK® prevents hard sedimentation. Furthermore, DISPERBYK® improves the effectiveness of pyrogenic silica. The water content may cause problems in epoxy and polyurethane systems. view less | |
| DISPERBYK®-101 N | BYK | DISPERBYK®-101 N is a wetting and dispersing additive for solvent-borne systems for stabilizing inorganic pigments. | |
| DISPERBYK®-102 | BYK | DISPERBYK®-102 is a wetting and dispersing additives for the improvement of colorant acceptance. It is a copolymer with acidic groups. This product is recommended for universal pastes based on DISPERBYK® 183 and DISPERBYK® 185 (see data sheet W202). DISPE...view more DISPERBYK®-102 is a wetting and dispersing additives for the improvement of colorant acceptance. It is a copolymer with acidic groups. This product is recommended for universal pastes based on DISPERBYK® 183 and DISPERBYK® 185 (see data sheet W202). DISPERBYK® 102 reduces viscosity and increases color strength. It prevents flooding/floating in solvent-borne systems and increases storage stability. DISPERBYK® 102 can be used as a post-additive in solvent-borne and aqueous systems to improve color strength and colorant acceptance. view less | |
| DISPERBYK-106 | BYK | DISPERBYK-106 is a wetting and dispersing additive for solvent-borne and solvent-free systems. | |
| DISPERBYK®-107 | BYK | DISPERBYK®-107 is a wetting and dispersing additive for solvent-borne and solvent-free systems. It is a solution of a hydroxyfunctional carboxylic acid ester with pigment affinic groups. This product was especially developed for solvent-borne architectura...view more DISPERBYK®-107 is a wetting and dispersing additive for solvent-borne and solvent-free systems. It is a solution of a hydroxyfunctional carboxylic acid ester with pigment affinic groups. This product was especially developed for solvent-borne architectural paints to stabilize titanium dioxide, extenders and other inorganic and organic pigments. Often the extender content can be increased without losing gloss. Mill-base viscosity is reduced drastically. White base paints stabilized with DISPERBYK®-107 have better color acceptance and do not demonstrate flooding and floating when tinted with universal colorants. DISPERBYK®-107 is suitable for the formulation of pigment concentrates based on long oil alkyds. view less | |
| DISPERBYK®-108 | BYK | DISPERBYK®-108 is a wetting and dispersing additive for solvent-borne and solvent-free systems. It is a hydroxyfunctional carbocylic acid ester with pigment affinic groups. s the solvent-free version of DISPERBYK®-107. Therefore it is especially suitable ...view more DISPERBYK®-108 is a wetting and dispersing additive for solvent-borne and solvent-free systems. It is a hydroxyfunctional carbocylic acid ester with pigment affinic groups. s the solvent-free version of DISPERBYK®-107. Therefore it is especially suitable for the production of flood/float-free high-solids and aromatic-free decorative and architectural paints. DISPERBYK®-108 is successfully utilized in the production of solvent-borne pigment concentrates for architectural paints. view less | |
| DISPERBYK®-109 | BYK | DISPERBYK®-109 is a wetting and dispersing additive for the improvement fo colorant acceptance. It is a high molecular weight Alkylolamino amide. By using DISPERBYK-109 the color acceptance of medium to unpolar paint systems is distinctly improved. DISPER...view more DISPERBYK®-109 is a wetting and dispersing additive for the improvement fo colorant acceptance. It is a high molecular weight Alkylolamino amide. By using DISPERBYK-109 the color acceptance of medium to unpolar paint systems is distinctly improved. DISPERBYK-109 can also be post-added to the paint system. However this should be done before addition of the color paste. DISPERBYK-109 is preferably used in coatings based on long oil alkyd resins and thermoplastic acrylates to disperse inorganic pigments (titanium dioxide and extenders). view less | |
| DISPERBYK®-111 | BYK | DISPERBYK®-111 is a wetting and dispersing additive for solvent-borne systems. It is composed of a copolymer with acidic groups. This product is designed primarily for usage in high solids and in solvent-free systems. Because of its anionic character, it ...view more DISPERBYK®-111 is a wetting and dispersing additive for solvent-borne systems. It is composed of a copolymer with acidic groups. This product is designed primarily for usage in high solids and in solvent-free systems. Because of its anionic character, it is ideal for acid catalyzed systems (such as coil coatings). DISPERBYK-111stabilizes inorganic pigments, and is particularly effective with titanium dioxide. It increases gloss, reduces haziness (especially in high rotation “minibell“ and / or other electrostatically applied systems) and dramatically reduces millbase viscosity. A combination with pigments stabilized by the DISPERBYK-160 family (see Data Sheet W200) is possible without any problems. view less | |
| DISPERBYK®-115 | BYK | DISPERBYK®-115 is a wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is a solution of a high molecular weight block copolymer with pigment affinic groups. This product is most suitable for general industrial coatings,...view more DISPERBYK®-115 is a wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is a solution of a high molecular weight block copolymer with pigment affinic groups. This product is most suitable for general industrial coatings, high quality architectural paints and pigment concentrate formulations. It has a wide compatibility range and reduces the mill base viscosity. view less | |
| DISPERBYK®-118 | BYK | DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...view more DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. view less | |
| DISPERBYK-130 | BYK | DISPERBYK-130 is a wetting and dispersing additive to stabilize acidic carbon black pigments in particular. | |
| DISPERBYK®-140 | BYK | DISPERBYK®-140 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a solution of an alkylammonium salt of an acidic polymer. This product displays excellent compatibility with all common paint binders. As a special ...view more DISPERBYK®-140 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a solution of an alkylammonium salt of an acidic polymer. This product displays excellent compatibility with all common paint binders. As a special note, for nitrocellulose (NC) and thermoplastic acrylics (TPA), DISPERBYK-140 displays superb compatibility. view less | |
| DISPERBYK®-142 | BYK | DISPERBYK®-142 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a solution of a phosphoric ester salt of a high molecular weight copolymer with pigment affinic groups. This product displays excellent compatibilit...view more DISPERBYK®-142 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a solution of a phosphoric ester salt of a high molecular weight copolymer with pigment affinic groups. This product displays excellent compatibility with all common paint binders. As a special note, for epoxy systems, DISPERBYK®-142 displays superb compatibility. view less | |
| DISPERBYK®-145 | BYK | DISPERBYK®-145 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a phosphoric acid ester salt of a high molecular copolymer with pigment affinic groups. This product exhibits excellent compatibility with all commo...view more DISPERBYK®-145 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a phosphoric acid ester salt of a high molecular copolymer with pigment affinic groups. This product exhibits excellent compatibility with all commonly used paint binders. DISPERBYK®-145 is especially suitable for use in low polarity systems such as alkyd, acrylic, TPA, and epoxy resins. view less | |
| DISPERBYK®-161 | BYK | DISPERBYK®-161 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is an optimized v...view more DISPERBYK®-161 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is an optimized version of DISPERBYK® 160 in regard to product handling. Its molecular weight distribution, polarity and effectiveness are very similar to those of DISPERBYK® 160. view less | |
| DISPERBYK-161 TF | BYK | DISPERBYK-161 TF is a tin-free wetting and dispersing additive for solvent-borne automotive and industrial coatings and pigment concentrates. Particularly suitable for the stabilization of fine-particle carbon blacks and organic pigments, especially in 2-...view more DISPERBYK-161 TF is a tin-free wetting and dispersing additive for solvent-borne automotive and industrial coatings and pigment concentrates. Particularly suitable for the stabilization of fine-particle carbon blacks and organic pigments, especially in 2-pack PU and baking systems. Excellent reduction of mill base viscosity. view less | |
| DISPERBYK®-162 | BYK | DISPERBYK®-162 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is used primarily...view more DISPERBYK®-162 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is used primarily in wood coatings and for the production of pigment concentrates. DISPERBYK® 162 has a slightly lower molecular weight and polarity than DISPERBYK® 161. view less | |
| DISPERBYK-162 TF | BYK | DISPERBYK-162 TF is a wetting and dispersing additive for solvent-borne coatings and pigment concentrates. Particularly suitable for the stabilization of carbon blacks and organic pigments, especially in 2K-PU wood and furniture coatings. DISPERBYK-162 TF...view more DISPERBYK-162 TF is a wetting and dispersing additive for solvent-borne coatings and pigment concentrates. Particularly suitable for the stabilization of carbon blacks and organic pigments, especially in 2K-PU wood and furniture coatings. DISPERBYK-162 TF is the aromatic- and tin-free version of DISPERBYK-162. view less | |
| DISPERBYK®-163 | BYK | DISPERBYK®-163 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is used in man...view more DISPERBYK®-163 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is used in many formulations. For new developments, however, the additives DISPERBYK® 2164 and DISPERBYK®2163 (see Data Sheet W235) should be preferred. DISPERBYK® 163 has an even lower molecular weight than DISPERBYK-162, is less polar and is used primarily in general industrial coatings and to produce pigment concentrates. It has a wider compatibility in various binder types than DISPERBYK® 161 and DISPERBYK® 162. The aromatic-free version of DISPERBYK® 163 is available as the product DISPERBYK® 167. view less | |
| DISPERBYK-163 TF | BYK | DISPERBYK-163 TF is a wetting and dispersing additive for solvent-borne coatings and pigment concentrates. Stabilization of pigments of all kinds. Broad compatibility for universally applicable solventborne pigment concentrates based on aldehyde and acryl...view more DISPERBYK-163 TF is a wetting and dispersing additive for solvent-borne coatings and pigment concentrates. Stabilization of pigments of all kinds. Broad compatibility for universally applicable solventborne pigment concentrates based on aldehyde and acrylate grinding resins. DISPERBYK-163 TF is the tin-free variant of DISPERBYK-163. view less | |
| DISPERBYK®-164 | BYK | DISPERBYK®-164 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. Solutions of high molecular weight block copolymers with pigment affinic groups. DISPERBYK® 164 is used in many formulations. For...view more DISPERBYK®-164 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. Solutions of high molecular weight block copolymers with pigment affinic groups. DISPERBYK® 164 is used in many formulations. For new developments, however, the additive DISPERBYK® 2164 (see Data Sheet W235) should be preferred. DISPERBYK® 164 has a molecular weight similar to that of DISPERBYK® 163, but is less polar and its solids content is higher. It is used in pigment concentrates and general industrial coatings. DISPERBYK® 164 does not contain aromatics. view less | |
| DISPERBYK-166 | BYK | DISPERBYK-166 is a high molecular weight wetting and dispersing additive for organic pigments in solvent-borne systems. | |
| DISPERBYK-166 TF | BYK | DISPERBYK-166 TF is a tin-free high molecular weight wetting and dispersing additive for organic pigments in solvent-borne coatings. | |
| DISPERBYK®-167 | BYK | DISPERBYK®-167 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is used in many f...view more DISPERBYK®-167 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is used in many formulations. For new developments, however, the additive DISPERBYK®-2164 (see Data Sheet W235) should be preferred. DISPERBYK-®167 is the aromatic-free version of DISPERBYK® 163. It has the same application properties as DISPERBYK® 163. view less | |
| DISPERBYK-167 TF | BYK | DISPERBYK-167 TF is a wetting and dispersing additive for solvent-borne coatings and pigment concentrates. Stabilization of pigments of all kinds. Broad compatibility for universally applicable pigment concentrates based on aldehyde and acrylate grinding ...view more DISPERBYK-167 TF is a wetting and dispersing additive for solvent-borne coatings and pigment concentrates. Stabilization of pigments of all kinds. Broad compatibility for universally applicable pigment concentrates based on aldehyde and acrylate grinding resins. DISPERBYK-167 TF is the tin-free variant of DISPERBYK-167. view less | |
| DISPERBYK®-168 | BYK | DISPERBYK®-168 is a high molecular weight wetting and dispersing additive for solvent-borne and UV-curing systems. It is a solution of a high molecular weight block copolymer with pigment affinic groups. This product increases gloss and transparency. It s...view more DISPERBYK®-168 is a high molecular weight wetting and dispersing additive for solvent-borne and UV-curing systems. It is a solution of a high molecular weight block copolymer with pigment affinic groups. This product increases gloss and transparency. It shortens dispersion time, lowers viscosity and increases color strength. In UV-curable wood coatings the incorporation of pigments, extenders and matting agents is improved due to the good wetting of surfaces. view less | |
| DISPERBYK-168 TF | BYK | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | |
| DISPERBYK®-170 | BYK | DISPERBYK®-170 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product has an extremely ...view more DISPERBYK®-170 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product has an extremely high molecular weight. Accordingly, it imparts excellent stabilization of inorganic and organic pigments. DISPERBYK® 170 is used primarily in acid-catalyzed polyester/melamine topcoats and PVdF systems. view less | |
| DISPERBYK-170 TF | BYK | DISPERBYK-170 TF is a tin-free wetting and dispersing additive for solvent-borne coil coatings and industrial coatings. Standard additive for acid-catalyzed and acid-curable coating systems. | |
| DISPERBYK®-171 | BYK | DISPERBYK®-171 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product has a slightly lo...view more DISPERBYK®-171 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product has a slightly lower molecular weight than DISPERBYK®-170 and consequently displays a wider compatibility with many grinding polyester resins. Therefore, DISPERBYK®-171 can also be utilized in highly filled pigment concentrate formulations. In some systems, DISPERBYK®-171 may improve adhesion to aluminium substrates. view less | |
| DISPERBYK®-174 | BYK | DISPERBYK®-174 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is especially sui...view more DISPERBYK®-174 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is especially suitable for producing pigment concentrates. In addition to stabilizing pigments, DISPERBYK®-174 reduces millbase viscosity, thus enabling the formulator to produce highly filled pigment concentrates without difficulty view less | |
| DISPERBYK®-180 | BYK | DISPERBYK®-180 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is an alkylolammonium salt of a copolymer with acidic groups. This product is used in aqueous, solvent-borne and solvent-free coatings ...view more DISPERBYK®-180 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is an alkylolammonium salt of a copolymer with acidic groups. This product is used in aqueous, solvent-borne and solvent-free coatings to deflocculate and stabilize preferably inorganic pigments (especially titanium dioxide). DISPERBYK®-180 is solvent-free, reduces millbase viscosity and therefore is suitable for “low-VOC“ and “VOC-free“ systems. view less | |
| DISPERBYK®-181 | BYK | DISPERBYK®-181 is a wetting and dispersing additive for aqueous systems. It is a solution of an alkylolammonium salt of a polyfunctional polymer. This product improves the storage stability (gloss, leveling) in emulsion paints, in tinting systems the colo...view more DISPERBYK®-181 is a wetting and dispersing additive for aqueous systems. It is a solution of an alkylolammonium salt of a polyfunctional polymer. This product improves the storage stability (gloss, leveling) in emulsion paints, in tinting systems the color acceptance and color development is increased; in aqueous systems DISPERBYK®-181 is used in combination with a dispersing additive such as BYK-154 (see Data Sheet W220). In solventborne systems DISPERBYK®-181 reduces as a wetting and dispersing additive the viscosity and increases the gloss view less | |
| DISPERBYK®-182 | BYK | DISPERBYK®-182 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This displays a wide application area a...view more DISPERBYK®-182 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This displays a wide application area and is compatible with both solvent-borne and aqueous systems. DISPERBYK®-182 can be utilized - alone or in combination with DISPERBYK®-108 (see Data Sheet W217/PW3) - to produce solvent-borne pigment concentrates. view less | |
| DISPERBYK®-184 | BYK | DISPERBYK®-184 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is primarily for aqueous s...view more DISPERBYK®-184 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is primarily for aqueous systems. It is preferably used to stabilize organic pigments. For inorganic pigments, DISPERBYK®-180 should be used. view less | |
| DISPERBYK-184 TF | BYK | DISPERBYK-184 TF is a tin-free wetting and dispersing additive for aqueous paint systems and resin-containing aqueous pigment concentrates. | |
| DISPERBYK®-185 | BYK | DISPERBYK®-185 is a high molecular weight wetting and dispersing additive for solvent-borne and solvent-free pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is solvent-f...view more DISPERBYK®-185 is a high molecular weight wetting and dispersing additive for solvent-borne and solvent-free pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is solvent-free and is especially suitable for the production of alkylphenol ethoxylate- and solvent-free universal tinters which are used in aqueous, solvent-borne and solvent-free architectural coatings. DISPERBYK®-185 is also well suited for the prevention of flooding/floating in PVC-plastisols for coil coating applications. view less | |
| DISPERBYK®-187 | BYK | DISPERBYK®-187 is a wetting and dispersing additive for aqueous systems. It is a solution of an alkylolammonium salt of a polyfunctional polymer. This product improves the storage stability (gloss, leveling) of emulsion paints. In tinting systems, DISPERB...view more DISPERBYK®-187 is a wetting and dispersing additive for aqueous systems. It is a solution of an alkylolammonium salt of a polyfunctional polymer. This product improves the storage stability (gloss, leveling) of emulsion paints. In tinting systems, DISPERBYK®-187 improves colorant acceptance and color development. In aqueous systems DISPERBYK®-187 may be used in combination with a dispersing additive such as BYK-154 (see Data Sheet W220). view less | |
| DISPERBYK®-190 | BYK | DISPERBYK®-190 is a wetting and dispersing additive for aqueous systems and pigment concentrates. It is a solution of a high molecular weight block copolymer with pigment affinic groups. This product is especially designed for the production of resin-free...view more DISPERBYK®-190 is a wetting and dispersing additive for aqueous systems and pigment concentrates. It is a solution of a high molecular weight block copolymer with pigment affinic groups. This product is especially designed for the production of resin-free, stable pigment concentrates for flood/float-free general industrial aqueous coating systems. For optimum performance, it is recommended that only pigment, DISPERBYK®-190 and water be used for pigment grinds (resin-, amine- and co-solvent-free). DISPERBYK®-190 does not contain organic solvents and therefore is only suitable for aqueous systems. view less | |
| DISPERBYK®-190 BF | BYK | DISPERBYK®-190 BF is a VOC- and solvent-free wetting and dispersing additive for aqueous printing inks, coating systems and adhesives. Standard additive for resin-free pigment concentrates. Suitable for all pigments. Biocide-free version of DISPERBYK-190. | |
| DISPERBYK-193 | BYK | DISPERBYK-193 is a solvent-free wetting and dispersing additive for aqueous printing inks. Particularly suitable for pigment concentrates containing acrylic resins. | |
| DISPERBYK-194 N | BYK | DISPERBYK-194 N is a wetting and dispersing additive for aqueous systems and pigment concentrates, especially for use in aqueous two-pack polyurethane and two-pack epoxy systems. | |
| DISPERBYK®-199 | BYK | DISPERBYK®-199 is a solution of a copolymer with pigment affinic groups. The additive deflocculates pigments through electrosterical stabilization. Due to the small particle sizes of the deflocculated pigments, high gloss is achieved and color strength is...view more DISPERBYK®-199 is a solution of a copolymer with pigment affinic groups. The additive deflocculates pigments through electrosterical stabilization. Due to the small particle sizes of the deflocculated pigments, high gloss is achieved and color strength is improved. Additionally, transparency and hiding power are increased. This product reduces viscosity, subsequently, leveling is improved and higher pigment load is possible. view less | |
| DISPERBYK®-199 BF | BYK | DISPERBYK®-199 BF is a VOC-free wetting and dispersing additive for stabilizing organic and inorganic pigments in aqueous coatings, adhesives, pigment concentrates and care products. Biocide-free version of DISPERBYK-199. | |
| DISPERBYK®-2000 | BYK | DISPERBYK®-2000 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a modified acrylate blockcopolymer. This product is especially suitable for CAB-containing base-coats and all top-coats. DISPERBYK®-2000 prevents r...view more DISPERBYK®-2000 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a modified acrylate blockcopolymer. This product is especially suitable for CAB-containing base-coats and all top-coats. DISPERBYK®-2000 prevents reflocculation of pigments also after addition of CAB after grinding. It reduces mill base viscosity, especially for organic pigments. To achieve the optimum viscosity reduction it is recommended to use polar solvents in the millbase. To achieve best grinding results, it is not necessary to use CAB in the grinding phase. Pigments ground with DISPERBYK®-2000 are unlimited compatible with pigments which were ground with the DISPERBYK®-160-family, DISPERBYK®-180 or DISPERBYK®-110. view less | |
| DISPERBYK®-2001 | BYK | DISPERBYK®-2001 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a modified acrylate blockcopolymer. This product has similar properties as compared to DISPERBYK®-2000. In many systems the use of DISPERBYK®-2001 ...view more DISPERBYK®-2001 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a modified acrylate blockcopolymer. This product has similar properties as compared to DISPERBYK®-2000. In many systems the use of DISPERBYK®-2001 leads to an even stronger reduction of the mill base viscosity. DISPERBYK®-2001 has a higher solids content as compared to DISPERBYK®-2000. view less | |
| DISPERBYK®-2008 | BYK | DISPERBYK®-2008 is a structured acrylic copolymer. It has been specifically developed as a wetting and dispersing additive for silica-based matting agents for use in solvent-free UV- systems and high solid coatings. Typical applications are in wood and fu...view more DISPERBYK®-2008 is a structured acrylic copolymer. It has been specifically developed as a wetting and dispersing additive for silica-based matting agents for use in solvent-free UV- systems and high solid coatings. Typical applications are in wood and furniture coatings, industrial coatings and printing inks. DISPERBYK®-2008 is based on controlled polymerization technology (CPT). view less | |
| DISPERBYK®-2009 | BYK | DISPERBYK®-2009 is a wetting and dispersing additive for high-solid and solvent-free coating systems. It is composed of a solution of a structured acrylic copolymer. This product has the following advantages: low additive dosage on matting agent surface n...view more DISPERBYK®-2009 is a wetting and dispersing additive for high-solid and solvent-free coating systems. It is composed of a solution of a structured acrylic copolymer. This product has the following advantages: low additive dosage on matting agent surface needed, high matting efficiency of the flatting agent, reduction of viscosity and Newtonian flow behaviour, and good orientation of the silica-based matting agent. view less | |
| DISPERBYK®-2010 | BYK | DISPERBYK®-2010 is a high molecular weight wetting and dispersing additive for aqueous systems based upon CRP technology. It is an acrylate copolymer with pigment affinic groups. This product has a relatively hydrophobic backbone to minimize the impact on...view more DISPERBYK®-2010 is a high molecular weight wetting and dispersing additive for aqueous systems based upon CRP technology. It is an acrylate copolymer with pigment affinic groups. This product has a relatively hydrophobic backbone to minimize the impact on water resistance of the dried coating film. DISPERBYK®-2010 is especially designed for the production of resin-free, stable pigment concentrates for aqueous coating systems. For optimum performance, the grind should only consist of water, DISPERBYK®-2010 and pigments; the grind should not be comprised of resin, amine, or co-solvents. This product does not contain organic solvents and is only suitable for aqueous systems. view less | |
| DISPERBYK®-2012 | BYK | DISPERBYK-2012 is suitable for resin and resin-free grinds. The additive is compatible with a wide range of water-soluble resins, emulsions and dispersions. This high molecular weight additive deflocculates pigments through steric stabilization of the pig...view more DISPERBYK-2012 is suitable for resin and resin-free grinds. The additive is compatible with a wide range of water-soluble resins, emulsions and dispersions. This high molecular weight additive deflocculates pigments through steric stabilization of the pigment. Therefore, color strength, transparency, gloss and storage stability of the pigment concentrates are improved. view less | |
| DISPERBYK®-2013 | BYK | DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excel...view more DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excellent stabilization, in particular in 100% UV systems and particularly of organic pigments and carbon black pigments. In so doing, this product has an impressive, effective viscosity-reducing effect, simultaneously reducing thixotropic flow behavior. view less | |
| DISPERBYK-2014 | BYK | DISPERBYK-2014 is a 100% solvent-free wetting and dispersing additive for solvent-borne, solvent-free, aqueous and UV coatings, as well as for aqueous printing inks and inkjet inks. | |
| DISPERBYK®-2015 | BYK | DISPERBYK®-2015 is a high molecular weight wetting and dispersing additive for aqueous systems based upon CRP technology. It is an acrylate copolymer with pigment affinic groups. This product is especially designed for the production of resin- and VOC-fre...view more DISPERBYK®-2015 is a high molecular weight wetting and dispersing additive for aqueous systems based upon CRP technology. It is an acrylate copolymer with pigment affinic groups. This product is especially designed for the production of resin- and VOC-free pigment concentrates for aqueous coating systems. For optimum performance, it is recommended to use only pigments, DISPERBYK® 2015 and water for pigment grindings (resin-, amine, and co-solvent-free). This product is only suitable for aqueous systems. view less | |
| DISPERBYK®-2015 BF | BYK | DISPERBYK®-2015 BF is a VOC- and solvent-free wetting and dispersing additive for aqueous coatings, printing inks, adhesives and care products. For resin-free pigment concentrates. Biocide-free version of DISPERBYK-2015. | |
| DISPERBYK®-2018 | BYK | DISPERBYK®-2018 is a VOC- and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, adhesives, and pigment concentrates. | |
| DISPERBYK®-2019 | BYK | DISPERBYK®-2019 is a VOC and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, and pigment concentrates. |
