| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK-3568 | BYK | BYK-3568 is a surface-active additive to improve leveling and increase the surface energy of solvent-borne, 100 %, and UV systems, with a medium reduction in surface tension and a medium increase in surface slip. | |
| ERIS 280 | Omnova Solutions | ERIS 280 is a synthetic resin with 100% content of renewable raw materials. Due to the high content of raw materials from renewable sources, ERIS 280 is a polymeric binder suitable for the formulation of paints with reduced carbon footprint. This product ...view more ERIS 280 is a synthetic resin with 100% content of renewable raw materials. Due to the high content of raw materials from renewable sources, ERIS 280 is a polymeric binder suitable for the formulation of paints with reduced carbon footprint. This product is specially recommended for waterborne decorative paints. view less | |
| Hydro PLIOLITE® 010 | Omnova Solutions | Hydro PLIOLITE® 010 is an acrylate copolymer based on a proprietary EBS (Emulsified Binding System) technology, that allows excellent penetrative adhesion to porous masonry substrates and outstanding exterior weathering. Hydro PLIOLITE® 010 is ideally sui...view more Hydro PLIOLITE® 010 is an acrylate copolymer based on a proprietary EBS (Emulsified Binding System) technology, that allows excellent penetrative adhesion to porous masonry substrates and outstanding exterior weathering. Hydro PLIOLITE® 010 is ideally suited for flat exterior masonry coatings, pigmented surface conditioners or interior tension-free wall and ceiling paints. view less | |
| Hydro PLIOLITE® 211 | Omnova Solutions | Hydro PLIOLITE® 211 is a styrene acrylic copolymer designed for high performance waterborne intumescent coatings for indoor or outdoor exposure. Based on the same technology and know-how as durable and effective PLIOLITE® resins for solvent based reactive...view more Hydro PLIOLITE® 211 is a styrene acrylic copolymer designed for high performance waterborne intumescent coatings for indoor or outdoor exposure. Based on the same technology and know-how as durable and effective PLIOLITE® resins for solvent based reactive fire protection coatings, Hydro PLIOLITE 211 APEO-free styrene-acrylic emulsion copolymer offers performance similar to solvent-based coatings. This new binder demonstrates excellent resistance to water and weathering, which helps maintain coating integrity for structural steel exposed to weather extremes during construction. Additionally, its intumescent properties provides an excellent char structure with good adhesion and uniform char consistency. Ideal for all durability categories, it permits the formulation of coatings with 30–120 minutes of best-in-class fire protection. view less | |
| Pliodisp® 7215 | Omnova Solutions | Pliodisp® 7215 is an aqueous copolymer emulsion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is stabilized with emulsifiers and polymer compounds and is suitable for the manufacturing of interior and exterior paints with an excelle...view more Pliodisp® 7215 is an aqueous copolymer emulsion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is stabilized with emulsifiers and polymer compounds and is suitable for the manufacturing of interior and exterior paints with an excellent cost/performance ratio, semi-gloss paints with good characteristics regarding gloss and blocking resistance, to create deep shade paints, textured coatings, and as a binder for the formulation of medium and medium-high PVC paints. Pliodisp® 7215 high binding power allows the substitution of traditional binders of VAM/VeoVa, VAM/Acrylate or VAM/Ethylene. view less | |
| PLIOLITE® AC3-H | Omnova Solutions | PLIOLITE® AC3-H is a highly soluble vinyl toluene-acrylate copolymer, developed specifically to be used with PLIOLITE® resins based on vinyl toluene, thus eliminating the need for external thickeners often detrimental to film performance. PLIOLITE® AC3-H ...view more PLIOLITE® AC3-H is a highly soluble vinyl toluene-acrylate copolymer, developed specifically to be used with PLIOLITE® resins based on vinyl toluene, thus eliminating the need for external thickeners often detrimental to film performance. PLIOLITE® AC3-H is mainly used in combination with VTAC-L for the formulation of intumescent coatings, high build masonry paints and alkali resistant masonry sealers. view less | |
| PLIOLITE® AC4 | Omnova Solutions | PLIOLITE® AC4 is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a thixotropic behavior. PLIOLITE® AC4 forms tough abrasion and chemically resi...view more PLIOLITE® AC4 is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a thixotropic behavior. PLIOLITE® AC4 forms tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Typical applications include: exterior masonry coatings, structural steel, intumescent coatings. view less | |
| PLIOLITE® AC5G | Omnova Solutions | PLIOLITE® AC5G is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a pseudoplastic behavior. PLIOLITE® AC5G forms tough abrasion and chemically ...view more PLIOLITE® AC5G is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a pseudoplastic behavior. PLIOLITE® AC5G forms tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Typical applications include: exterior masonry coatings, anticarbonation paints, intumescent coatings. view less | |
| PLIOLITE® AC80 | Omnova Solutions | PLIOLITE® AC80 is a newtonian styrene acrylate copolymer, often used in combination with AC4 or AC5G. PLIOLITE® AC80 forms tough abrasion, chemically resistant films that have excellent adhesion, UV resistance and weathering properties. Typical applicatio...view more PLIOLITE® AC80 is a newtonian styrene acrylate copolymer, often used in combination with AC4 or AC5G. PLIOLITE® AC80 forms tough abrasion, chemically resistant films that have excellent adhesion, UV resistance and weathering properties. Typical applications include: "all weather" masonry coatings, anticarbonation, metal protective, intumescent coatings. view less | |
| PLIOLITE® S5E | Omnova Solutions | PLIOLITE® S5E is a newtonian styrene butadiene copolymer, that forms tough films with excellent chemical and abrasion resistance. PLIOLITE® S5E provides excellent alkali resistance and can be used for example in masonry primers, road marking paints or con...view more PLIOLITE® S5E is a newtonian styrene butadiene copolymer, that forms tough films with excellent chemical and abrasion resistance. PLIOLITE® S5E provides excellent alkali resistance and can be used for example in masonry primers, road marking paints or concrete curing membrane. view less | |
| PLIOLITE® VTAC-H | Omnova Solutions | PLIOLITE® VTAC-H is a highly soluble vinyl toluene-acrylate copolymer. This newtonian thermoplastic resin is a high molecular weight, high viscosity version of PLIOLITE® VTAC-L. PLIOLITE® VTAC-H is ideally suited for multicolor paints. | |
| PLIOLITE® VTAC-L | Omnova Solutions | PLIOLITE® VTAC-L is a highly soluble vinyl toluene-acrylate copolymer. This newtonian film forming resin is recommended for applications where high solubility, high film hardness, good adhesion and balanced ageing properties are required. Typical uses of ...view more PLIOLITE® VTAC-L is a highly soluble vinyl toluene-acrylate copolymer. This newtonian film forming resin is recommended for applications where high solubility, high film hardness, good adhesion and balanced ageing properties are required. Typical uses of PLIOLITE® VTAC-L (alone or in combination with AC3-H) include: flat or high build masonry paints, intumescent coatings. view less | |
| PLIOTEC® 7104E | Omnova Solutions | PLIOTEC® 7104E is a carboxylated styrene acrylic dispersion used in coatings that form resistant films with excellent adhesion to concrete. PLIOTEC® 7104E is very suitable for waterproofing sealers or one pack floor coatings with abrasion resistance, exce...view more PLIOTEC® 7104E is a carboxylated styrene acrylic dispersion used in coatings that form resistant films with excellent adhesion to concrete. PLIOTEC® 7104E is very suitable for waterproofing sealers or one pack floor coatings with abrasion resistance, excellent hardness development, hot-tire pick up resistance and very good resistance to automotive chemicals. view less | |
| PLIOTEC® CR78 | Omnova Solutions | PLIOTEC® CR78 is an acrylic copolymer latex specifically designed for garage floor coatings, with excellent water and early moisture resistance. PLIOTEC® CR78 allows to achieve a very good hot-tire pick up and excellent chemical resistance (alkali, acid, ...view more PLIOTEC® CR78 is an acrylic copolymer latex specifically designed for garage floor coatings, with excellent water and early moisture resistance. PLIOTEC® CR78 allows to achieve a very good hot-tire pick up and excellent chemical resistance (alkali, acid, automotive fluids, unleaded petrol). view less | |
| PLIOTEC® EL25 | Omnova Solutions | PLIOTEC® EL25 is an elastomeric acrylic latex very suitable for the formulation of high performance coatings with superior elastomeric properties across a broad temperature range. PLIOTEC® EL25 provides excellent tensile/elongation properties, crack-bridg...view more PLIOTEC® EL25 is an elastomeric acrylic latex very suitable for the formulation of high performance coatings with superior elastomeric properties across a broad temperature range. PLIOTEC® EL25 provides excellent tensile/elongation properties, crack-bridging ability, excellent dirt pick-up resistance and UV resistance. Typical applications include: vertical exterior masonry coatings and roof coatings. view less | |
| PLIOTEC® LEB20 | Omnova Solutions | PLIOTEC® LEB20 by Omnova Solutions is an unique water-based acrylic resin for exterior masonry paints, topcoats for EIFS and house plinths. Exhibits superior resistance to exudation (surfactant leaching) and efflorescence owing to the LEB (Low Exudation B...view more PLIOTEC® LEB20 by Omnova Solutions is an unique water-based acrylic resin for exterior masonry paints, topcoats for EIFS and house plinths. Exhibits superior resistance to exudation (surfactant leaching) and efflorescence owing to the LEB (Low Exudation Binder) technology, strong early rain resistance, mud cracking resistance and superior dirt pick-up resistance. It is APEO-free with no added formaldehyde. Pliotec® LEB20 shows outstanding color retention with good adhesion to porous masonry substrates. It has a shelf life of 12 months. view less | |
| PLIOTEC® PA90MT | Omnova Solutions | PLIOTEC® PA90MT is a pure acrylic latex designed for high performance clear and pigmented coatings, with excellent blush resistance, very good exterior weatherability and UV resistance. PLIOTEC® PA90MT provides excellent water and early moisture resistanc...view more PLIOTEC® PA90MT is a pure acrylic latex designed for high performance clear and pigmented coatings, with excellent blush resistance, very good exterior weatherability and UV resistance. PLIOTEC® PA90MT provides excellent water and early moisture resistance, and very good adhesion to concrete and masonry. Typical applications include: concrete curing membrane, floor paints, vertical and horizontal clear or pigmented coatings. view less | |
| PLIOTEC® SA 40 | Omnova Solutions | PLIOTEC® SA 40 is a carboxylated styrene acrylic dispersion used in coatings with excellent adhesion to concrete, water resistance and pigment binding capability. PLIOTEC® SA 40 resin is particularly suitable for low VOC odorless waterproofing sealers and...view more PLIOTEC® SA 40 is a carboxylated styrene acrylic dispersion used in coatings with excellent adhesion to concrete, water resistance and pigment binding capability. PLIOTEC® SA 40 resin is particularly suitable for low VOC odorless waterproofing sealers and exterior masonry pigmented primers, providing excellent resistance to alkali and efflorescence, even on fresh concrete or renovation mortars. view less | |
| PLIOWAY® Ultra G20 | Omnova Solutions | PLIOWAY® Ultra G20 is a vinyl acrylate copolymer. This thermoplastic resin is a unique film forming rheological resin that, once dissolved in low odour dearomatized or isoparaffinic solvents, develops a gel with a pseudoplastic behavior. PLIOWAY® Ultra G2...view more PLIOWAY® Ultra G20 is a vinyl acrylate copolymer. This thermoplastic resin is a unique film forming rheological resin that, once dissolved in low odour dearomatized or isoparaffinic solvents, develops a gel with a pseudoplastic behavior. PLIOWAY® Ultra G20 forms tension free, tough, chemically resistant films and, when used alone or in combination with Ultra 200 or with Ultra 350LV, is ideally suited for a wide variety of end-uses. view less | |
| Resipur® 5186 | Omnova Solutions | Resipur® 5186 is an isophthalic unsaturated polyester resin of high reactivity, pre-accelerated and thixotropic. It is an opaque pinky liquid, free of impurities. This product presents a low styrene emission during the curing process and is therefore cons...view more Resipur® 5186 is an isophthalic unsaturated polyester resin of high reactivity, pre-accelerated and thixotropic. It is an opaque pinky liquid, free of impurities. This product presents a low styrene emission during the curing process and is therefore considered to be an ecological resin. Resipur® 5186 is recommended for rigid laminates produced by hand lay-up or filament winding. view less | |
| Resipur® 5504 | Omnova Solutions | Resipur® 5504 is an isophthalic unsaturated polyester resin of low reactivity. It is a transparent slightly yellowish liquid, free of impurities. It is approx. 59% of polymer diluted in styrene. This product is recommended for rigid laminates produced by ...view more Resipur® 5504 is an isophthalic unsaturated polyester resin of low reactivity. It is a transparent slightly yellowish liquid, free of impurities. It is approx. 59% of polymer diluted in styrene. This product is recommended for rigid laminates produced by infusion. view less | |
| Resipur® 9189 | Omnova Solutions | Resipur® 9189 is an orthophtalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic which contains paraffin. It is an opaque pinky liquid, free of impurities. This product presents a low styrene emission during the curing pr...view more Resipur® 9189 is an orthophtalic unsaturated polyester resin of medium reactivity, pre-accelerated and thixotropic which contains paraffin. It is an opaque pinky liquid, free of impurities. This product presents a low styrene emission during the curing process. Due to this fact, Resipur® 9189 is considered to be an ecological resin. view less | |
| RHEOBYK-100 | BYK | RHEOBYK-100 is a powdered rheology additive for non-polar to medium-polarity solvent-borne systems. It is suitable for many systems based on aliphatic through to aromatic solvents. It can therefore be used in protective coatings, architectural coatings an...view more RHEOBYK-100 is a powdered rheology additive for non-polar to medium-polarity solvent-borne systems. It is suitable for many systems based on aliphatic through to aromatic solvents. It can therefore be used in protective coatings, architectural coatings and general industrial coatings. RHEOBYK-100 is also particularly suitable for use in thick-layered epoxy and vinyl resin systems. view less |
