| AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-3756 | BYK | BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases ...view more BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases surface slip. view less | |
| BYK-UV 3518 | BYK | BYK-UV 3518 is a nano-particle dispersion based on surface-treated silica for improving the scratch and abrasion resistance of solvent-free and solvent-borne radiation-curable clear coats. | |
| BYK-UV 3519 | BYK | BYK-UV 3519 is a nano-particle dispersion based on surface-treated silica for improving the scratch and abrasion resistance of solvent-free and solvent-borne radiation-curable clear coats. | |
| CERAFLOUR 1050 | BYK | CERAFLOUR 1050 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...view more CERAFLOUR 1050 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. view less | |
| CERAFLOUR 1051 | BYK | CERAFLOUR 1051 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...view more CERAFLOUR 1051 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. view less | |
| CERAFLOUR 1052 | BYK | CERAFLOUR 1052 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...view more CERAFLOUR 1052 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. view less | |
| Curing Agent D | Ichemco | Curing Agent D is a diisocyanate in a liquid solution form. This product has a total solids content of 64-66%. Curing Agent D is most commonly used as a curing and cross-linking agent in coating, adhesive, primer, and paint applications. | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...view more Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. view less | |
| Ithane 15 | Ichemco | Ithane 15 is an aromatic thermoplastic polyurethane in a dry granule form. This product has a Brookfield viscosity at 25°C of 100-200 cPs. Ithane 15 is most commonly used in flexible and rigid lacquer production applications. | |
| Pro Lac WT | Ichemco | Pro Lac WT is a water-based thermoplastic acrylic copolymer protective coating. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 500-700 cPs. Pro Lac WT is most commonly used in temporary coating production applica...view more Pro Lac WT is a water-based thermoplastic acrylic copolymer protective coating. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 500-700 cPs. Pro Lac WT is most commonly used in temporary coating production applications. view less | |
| Release K 100 D DIL. 1 ECO | Ichemco | Release K 100 D DIL. 1 ECO is a polyurethane release agent in an octane and isopropyl alcohol solvent solution. This product has a total solids content of 0.5-1.5%. Release K 100 D DIL. 1 ECO is most commonly used as a release agent in PP, PE, PVC, and po...view more Release K 100 D DIL. 1 ECO is a polyurethane release agent in an octane and isopropyl alcohol solvent solution. This product has a total solids content of 0.5-1.5%. Release K 100 D DIL. 1 ECO is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. view less | |
| S.L. 6103 | Ichemco | S.L. 6103 is a water-based emulsion of light molecular weight acrylic polymer. This product has a total solids content of 27.5-28.5%. S.L. 6103 is most commonly used as a thickening agent in water-based natural or synthetic latex coating applications. | |
| S.L. A 20 | Ichemco | S.L. A 20 is an APEO-free, water dispersion of acrylic copolymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 300 cPs. S.L. A 20 is most commonly used as a binder in water gloss enamel, primer, and ...view more S.L. A 20 is an APEO-free, water dispersion of acrylic copolymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 300 cPs. S.L. A 20 is most commonly used as a binder in water gloss enamel, primer, and clear varnish applications. view less | |
| Solacril SPR 12 M3 | Ichemco | Solacril SPR 12 M3 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 8.5-10.5%. Solacril SPR 12 M3 is most commonly used in spray applications. | |
| Tacksol ER 19 | Ichemco | Tacksol ER 19 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%. Tacksol ER 19 is most commonly used in adhesive and primer formulation applications. | |
| Tacksol SPR 33 | Ichemco | Tacksol SPR 33 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 32-34%. Tacksol SPR 33 is most commonly used spray application development applications. | |
| Tackwhite A 2P 50 | Ichemco | Tackwhite A 2P 50 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 2P 50 is most commonly used in pressure sensitive article productio...view more Tackwhite A 2P 50 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 2P 50 is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V) | Ichemco | Tackwhite A 2P 50 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Tackwhite A 2P 50 (V) is most commonly used in pressure sensitive article ...view more Tackwhite A 2P 50 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Tackwhite A 2P 50 (V) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V1) | Ichemco | Tackwhite A 2P 50 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 2P 50 (V1) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 50 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 2P 50 (V1) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V2) | Ichemco | Tackwhite A 2P 50 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 50 (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 50 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 50 (V2) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 | Ichemco | Tackwhite A 2P 60 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 600-900 mPa.s. Tackwhite A 2P 60 is most commonly used in pressure sensitive article production...view more Tackwhite A 2P 60 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 600-900 mPa.s. Tackwhite A 2P 60 is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 (V) | Ichemco | Tackwhite A 2P 60 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 4000-5000 mPa.s. Tackwhite A 2P 60 (V) is most commonly used in pressure sensitive article ...view more Tackwhite A 2P 60 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 4000-5000 mPa.s. Tackwhite A 2P 60 (V) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 (V2) | Ichemco | Tackwhite A 2P 60 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 60 (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 60 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 60 (V2) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 4 MED | Ichemco | Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applicatio...view more Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. view less | |
| Tackwhite A 4 MED (V2) | Ichemco | Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. view less | |
| Tackwhite A5 MED | Ichemco | Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production...view more Tackwhite A5 MED is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 47-49% as a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A5 MED is most commonly used pressure sensitive article production where high adhesion, water resistance, and cold resistance are required. view less | |
| Thickener NL | Ichemco | Thickener NL is a water-based vinylpyrrolidone copolymer. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 60-100 mPa.s. Thickener NL is most commonly used as a thickening agent in latex coating applications. | |
| Thickener PU 3 | Ichemco | Thickener PU 3 is a sodium polyacrylate thickener. This product has a Brookfield viscosity at 25°C of 23,000-33,000 mPa.s. Thickener PU 3 is most commonly used as a thickening agent in synthetic latex paint formulation applications. | |
| Thickener SL 6103 | Ichemco | Thickener SL 6103 is a stable, waterborne emulsion of a light molecular weight acrylic polymer in a milky white liquid form. This product has a total solids content of 27.5-28.5%. Thickener SL 6103 is most commonly used as a thickening agent in latex coat...view more Thickener SL 6103 is a stable, waterborne emulsion of a light molecular weight acrylic polymer in a milky white liquid form. This product has a total solids content of 27.5-28.5%. Thickener SL 6103 is most commonly used as a thickening agent in latex coating applications. view less | |
| Wetting Agent 62 | Ichemco | Wetting Agent 62 is a water and ethanol solution containing surfactants. This product is most commonly used to decrease blemishes such as fish-eyes in coating production applications. |
