| ANTI-TERRA®-203 | BYK | ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging te...view more ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-204 | BYK | ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixot...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-205 | BYK | ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides. | |
| ANTI-TERRA®-250 | BYK | ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the ...view more ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction. view less | |
| ANTI-TERRA®-U | BYK | ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of uns...view more ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of unsaturated polyamine amides and lower molecular weight acidic polyesters. view less | |
| ANTI-TERRA®-U 100 | BYK | ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERR...view more ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and inorganic. No adverse effect has been observed on the pot-life of two-component systems or on the dry time of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive in water soluble coatings. view less | |
| AQUACER 1013 | BYK | AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes. | |
| AQUACER 1031 | BYK | AQUACER 1031 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous care products. It offers an anti-slip effect and good foot traffic resistance. | |
| AQUACER 1039 | BYK | AQUACER 1039 is a paraffin wax emulsion for improved surface characteristics in aqueous coatings and printing inks. | |
| AQUACER 1040 | BYK | AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting. | |
| AQUACER 1061 | BYK | AQUACER 1061 is an emulsion of an ethylene-acrylic acid copolymer wax for improving the surface characteristics of paper. | |
| AQUACER 1063 | BYK | AQUACER 1063 is a polyethylene dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector. | |
| AQUACER 1075 | BYK | AQUACER 1075 is an emulsion based on an HD polyethylene wax to improve the surface properties of aqueous care products and polishes, and aqueous printing inks. | |
| AQUACER 1510 | BYK | AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds. | |
| AQUACER® 1547 | BYK | AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance. | |
| AQUACER 2500 | BYK | AQUACER 2500 is a wax emulsion on the basis of modified PE for aqueous foil and paper coatings to improve slip and abrasion resistance. | |
| AQUACER 2650 | BYK | AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the s...view more AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less | |
| AQUACER 3500 | BYK | AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | |
| AQUACER 494 | BYK | AQUACER 494 is an aqueous paraffin wax emulsion for care products and polishes. | |
| AQUACER 497 | BYK | AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip. | |
| AQUACER 501 | BYK | AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection. | |
| AQUACER 506 | BYK | AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 506 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 506 is compatible with all known polymer dispersions and plasticizers. view less | |
| AQUACER® 507 | BYK | AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...view more AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). view less | |
| AQUACER® 513 | BYK | AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less | |
| AQUACER 519 | BYK | AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 519 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 519 is compatible with all known polymer dispersions and plasticizers. view less | |
| AQUACER® 526 | BYK | AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves ...view more AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves orientation of effect pigments (aluminum, mica, etc.), reduces short wave defects (mottling, Bénard cells), and there is no negative influence on chemical resistance. view less | |
| AQUACER 527 | BYK | AQUACER 527 is a wax emulsion based on a modified EVA copolymer wax to improve surface characteristics in aqueous coating systems and printing inks. | |
| AQUACER 528 | BYK | AQUACER 528 is an emulsion based on an ethylene-acrylic acid-copolymer wax for improving the surface properties of aqueous care products. It offers strong anti-slip effect and good foot traffic resistance. | |
| AQUACER 530 | BYK | AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks. | |
| AQUACER® 531 | BYK | AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less | |
| AQUACER 532 | BYK | AQUACER 532 is an emulsion of a modified HD polyethylene wax for improved surface characteristics in aqueous coating systems. | |
| AQUACER® 533 | BYK | AQUACER® 533 is a wax emulsion on the basis of modified paraffin for aqueous systems to improve surface slip, anti-blocking, and water-resistance. It is typically used in architectural coatings and in the printing inks industry. | |
| AQUACER® 537 | BYK | AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking...view more AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking and slip. view less | |
| AQUACER® 539 | BYK | AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...view more AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. view less | |
| AQUACER 541 | BYK | AQUACER 541 is an aqueous emulsion of a montan ester wax for care products and polishes as well as for aqueous coating systems and leather coatings. | |
| AQUACER® 552 | BYK | AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems. | |
| AQUACER 561 | BYK | AQUACER 561 is a beeswax-based wax emulsion to improve surface protection in aqueous care products and coating systems. | |
| AQUACER 565 | BYK | AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the ...view more AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less | |
| AQUACER 570 | BYK | AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...view more AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. view less | |
| AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | |
| AQUACER 581 | BYK | AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts. | |
| AQUACER 582 | BYK | AQUACER 582 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous seed coatings. | |
| AQUACER 583 | BYK | AQUACER 583 is a wax emulsion used to improve the surface characteristics of seed coatings. | |
| AQUACER® 593 | BYK | AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...view more AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. view less | |
| AQUACER 595 | BYK | AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack...view more AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack effect. view less | |
| AQUACER 597 | BYK | AQUACER 597 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | |
| AQUACER® 840 | BYK | AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, impro...view more AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, improves orientation of effect pigments and reduces short wave defects. view less | |
| AQUAMAT® 208 | BYK | AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scrat...view more AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance and soft feel effect. view less | |
| AQUAMAT® 263 | BYK | AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less | |
| AQUATIX® 8421 | BYK | AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: impr...view more AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: improves effect pigment orientation, reduces cloudiness /mottling, shows less sensivity to co-solvents in coating systems compared to PU based thickeners, is “ready to use”, provides easy handling and incorporation compared to clays or acrylic thickeners, and excellent anti-settling properties in coatings during storage and application. view less | |
| BENTOLITE-L 10 | BYK | BENTOLITE-L 10 is a low iron rheology additive based on natural bentonite for aqueous plastic refractories. | |
| BENTOLITE-L 3 | BYK | BENTOLITE-L 3 is a low iron rheology additive based on natural bentonite for aqueous plastic refractories. | |
| Brufablend® Green E 27500 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Green E 27500 is a dry green pigment blend based on Bismuth Vanadate (PY184) with organic pigments. It is used for indoor and outdoor applications such as industrial coatings and powder coatings. All our products are lead and chrome free and a...view more Brufablend® Green E 27500 is a dry green pigment blend based on Bismuth Vanadate (PY184) with organic pigments. It is used for indoor and outdoor applications such as industrial coatings and powder coatings. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Green E 27501 Based on Bismuth Vanadate (PY184) | Bruchsaler Farbenfabrik | Brufablend® Green E 27501 is a dry green pigment blend based on Bismuth Vanadate yellow (PY184) with organic pigments. It is used in industrial coatings and is suitable for indoor and outdoor applications. All our products are lead and chrome free and are...view more Brufablend® Green E 27501 is a dry green pigment blend based on Bismuth Vanadate yellow (PY184) with organic pigments. It is used in industrial coatings and is suitable for indoor and outdoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Green E 27502 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Green E 27502 is a dry green pigment blend based on Bismuth Vanadate (PY184) with organic pigments. It is used in industrial coatings and powder coatings and is suitable for indoor and outdoor use and most industrial applications. All our prod...view more Brufablend® Green E 27502 is a dry green pigment blend based on Bismuth Vanadate (PY184) with organic pigments. It is used in industrial coatings and powder coatings and is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Green E 27510 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Green E 27510 is a dry green pigment blend based on Bismuth Vanadate yellow (PY184) with organic pigments. It is used in industrial and powder coatings and is suitable for indoor and outdoor applications. All our products are lead and chrome f...view more Brufablend® Green E 27510 is a dry green pigment blend based on Bismuth Vanadate yellow (PY184) with organic pigments. It is used in industrial and powder coatings and is suitable for indoor and outdoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Orange E 27120 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Orange E 27120 is an organic/inorganic pigment blend in powder form based on Bismuth Vanadate yellow (PY184). This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and a...view more Brufablend® Orange E 27120 is an organic/inorganic pigment blend in powder form based on Bismuth Vanadate yellow (PY184). This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Orange ES 27120 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Orange ES 27120 is an organic/inorganic pigment blend in powder form based on Bismuth Vanadate yellow (PY184). This product is used for outdoor applications which require high fastness. All our products are lead and chrome free and are an exce...view more Brufablend® Orange ES 27120 is an organic/inorganic pigment blend in powder form based on Bismuth Vanadate yellow (PY184). This product is used for outdoor applications which require high fastness. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Orange ES 27140 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Orange ES 27140 is an organic/inorganic pigment blend in powder form based on Bismuth Vanadate (PY184). This product is for outdoor applications which require high fastness like coatings and other industrial applications. All our products are...view more Brufablend® Orange ES 27140 is an organic/inorganic pigment blend in powder form based on Bismuth Vanadate (PY184). This product is for outdoor applications which require high fastness like coatings and other industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Orange H 27120 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Orange H 27120 is an organic/inorganic pigment blend in powder form with improved heat resistance based on Bismuth Vanadate yellow (PY184). This product is for applications which require the highest heat stability. All our products are lead an...view more Brufablend® Orange H 27120 is an organic/inorganic pigment blend in powder form with improved heat resistance based on Bismuth Vanadate yellow (PY184). This product is for applications which require the highest heat stability. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Orange H 27140 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Orange H 27140 is an organic/inorganic pigment blend in powder form with improved heat resistance based on Bismuth Vanadate yellow (PY184). This product is for applications which require highest heat stability. All our products are lead and ch...view more Brufablend® Orange H 27140 is an organic/inorganic pigment blend in powder form with improved heat resistance based on Bismuth Vanadate yellow (PY184). This product is for applications which require highest heat stability. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Red E 27150 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Red E 27150 is an organic/inorganic pigment blend in powder form based on bismuth vanadate yellow (PY184). This product is suitable for indoor and outdoor use and for most industrial applications. All our products are lead and chrome free and ...view more Brufablend® Red E 27150 is an organic/inorganic pigment blend in powder form based on bismuth vanadate yellow (PY184). This product is suitable for indoor and outdoor use and for most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Red E 27300 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Red E 27300 is an organic/inorganic pigment blend in powder form based on DPP red (PR254) and bismuth vanadate yellow (PY184). This product is suitable for indoor and outdoor use and for most industrial applications. All our products are lead ...view more Brufablend® Red E 27300 is an organic/inorganic pigment blend in powder form based on DPP red (PR254) and bismuth vanadate yellow (PY184). This product is suitable for indoor and outdoor use and for most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Red ES 27150 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Red ES 27150 is an organic/inorganic pigment blend in powder form based on Bismuth Vanadate yellow (PY184). This product is for use in industrial and powder coatings. It is used for outdoor applications which require high fastness. All our pro...view more Brufablend® Red ES 27150 is an organic/inorganic pigment blend in powder form based on Bismuth Vanadate yellow (PY184). This product is for use in industrial and powder coatings. It is used for outdoor applications which require high fastness. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Red ES 27300 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Red ES 27300 is an organic/inorganic pigment blend in powder form based on DPP red (PR254) and bismuth vanadate yellow. This product is for use in industrial, coil, and powder coatings. It is used for outdoor applications which require high fa...view more Brufablend® Red ES 27300 is an organic/inorganic pigment blend in powder form based on DPP red (PR254) and bismuth vanadate yellow. This product is for use in industrial, coil, and powder coatings. It is used for outdoor applications which require high fastness. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Red H 27150 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Red H 27150 is an organic/inorganic pigment blend in powder form with improved heat resistance based on bismuth vanadate yellow (PY184). This product is used for applications which require highest heat stability. All our products are lead an...view more Brufablend® Red H 27150 is an organic/inorganic pigment blend in powder form with improved heat resistance based on bismuth vanadate yellow (PY184). This product is used for applications which require highest heat stability. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27021 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27021 is a combination organic/inorganic pigment. It is supplied as a yellow powder. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. | Request Sample |
| Brufablend® Yellow E 27271 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27271 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments.This product is for use in industrial coatings, and it is suitable for indoor and outdoor applications. All our products are lead and chrome f...view more Brufablend® Yellow E 27271 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments.This product is for use in industrial coatings, and it is suitable for indoor and outdoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27311 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27311 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is for use in industrial coatings, and it is suitable for indoor and outdoor applications. All our products are lead and chrome ...view more Brufablend® Yellow E 27311 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is for use in industrial coatings, and it is suitable for indoor and outdoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27541 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27541 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is for use in industrial coatings, and it is suitable for indoor and outdoor applications. All our products are lead and chrome ...view more Brufablend® Yellow E 27541 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is for use in industrial coatings, and it is suitable for indoor and outdoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27543 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27543 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an ex...view more Brufablend® Yellow E 27543 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27711 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27711 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an ex...view more Brufablend® Yellow E 27711 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27727 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27727 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an ex...view more Brufablend® Yellow E 27727 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27810 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27810 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an ex...view more Brufablend® Yellow E 27810 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27835 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27835 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an e...view more Brufablend® Yellow E 27835 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27860 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27860 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an ex...view more Brufablend® Yellow E 27860 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27870 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27870 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an ex...view more Brufablend® Yellow E 27870 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 27880 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27880 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an ex...view more Brufablend® Yellow E 27880 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 28073 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 28073 is an organic/inorganic mixed pigment based on bismuth vandate yellow (PY184). This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent ...view more Brufablend® Yellow E 28073 is an organic/inorganic mixed pigment based on bismuth vandate yellow (PY184). This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow E 28100 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 28100 is an inorganic blend based on Bismuth Vanadate pigments for systems with a pH value of 7-8. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are...view more Brufablend® Yellow E 28100 is an inorganic blend based on Bismuth Vanadate pigments for systems with a pH value of 7-8. This product is suitable for indoor and outdoor use and most industrial applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow ES 27833 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow ES 27833 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is for use in industrial, coil, and powder coatings. It is desired for outdoor applications which require high fastness. All ou...view more Brufablend® Yellow ES 27833 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is for use in industrial, coil, and powder coatings. It is desired for outdoor applications which require high fastness. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow ES 27865 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow ES 27865 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. It is the lead free equivalent to the discontinued Brufasol Yellow 86 S5M.This product is widely used in coil coating, powder coating, autom...view more Brufablend® Yellow ES 27865 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. It is the lead free equivalent to the discontinued Brufasol Yellow 86 S5M.This product is widely used in coil coating, powder coating, automotive coating, construction coating, plastic, polymers, masterbatch and more. It is suitable for outdoor applications which require high fastness. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow ES 27887 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow ES 27887 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is for use in industrial, coil, and powder coatings. It is desired for outdoor applications which require high fastness. All ou...view more Brufablend® Yellow ES 27887 is a dry yellow pigment blend based on Bismuth Vanadate (PY184) with organic pigments. This product is for use in industrial, coil, and powder coatings. It is desired for outdoor applications which require high fastness. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow L 27311 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow L 27311 is an organic/inorganic mixed pigment designed for interior, air dried systems requiring heat stability up to 140 °C (240 °F). This product is for indoor applications. All our products are lead and chrome free and are an excelle...view more Brufablend® Yellow L 27311 is an organic/inorganic mixed pigment designed for interior, air dried systems requiring heat stability up to 140 °C (240 °F). This product is for indoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow L 27543 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow L 27543 is an organic/inorganic mixed pigment yellow designed for interior, air dried systems requiring heat stability up to 140 °C (240 °F). This product is suitable for indoor applications. All our products are lead and chrome free an...view more Brufablend® Yellow L 27543 is an organic/inorganic mixed pigment yellow designed for interior, air dried systems requiring heat stability up to 140 °C (240 °F). This product is suitable for indoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow L 27711 | Bruchsaler Farbenfabrik | Brufablend® Yellow L 27711 is an organic mixed pigment designed for interior, air dried systems requiring heat stability up to 140 °C (240 °F). This product is suitable for indoor applications. All our products are lead and chrome free and are an excelle...view more Brufablend® Yellow L 27711 is an organic mixed pigment designed for interior, air dried systems requiring heat stability up to 140 °C (240 °F). This product is suitable for indoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufablend® Yellow L 27727 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow L 27727 is an organic mixed pigment yellow designed for interior, air dried systems requiring heat stability up to 140 °C (240 °F). This product is for indoor applications. All our products are lead and chrome free and are an excellent ...view more Brufablend® Yellow L 27727 is an organic mixed pigment yellow designed for interior, air dried systems requiring heat stability up to 140 °C (240 °F). This product is for indoor applications. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufasol® Yellow AL 2300 Bismuth Vanadate PY184 | Bruchsaler Farbenfabrik | Brufasol® Yellow AL 2300 is a brilliant greenish shaded bismuth vanadate pigment. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternative to a chrome yellow with high opacity and has excel...view more Brufasol® Yellow AL 2300 is a brilliant greenish shaded bismuth vanadate pigment. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternative to a chrome yellow with high opacity and has excellent weather fastness. This product is widely used in coil coating, powder coating, automotive coating, construction coating, plastic, masterbatch and more. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufasol® Yellow AL 2301 Bismuth Vanadate PY184 | Bruchsaler Farbenfabrik | Brufasol® Yellow AL 2301 is a surface-modified bismuth vanadate pigment. It is easily dispersible and offers increased color strength. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternati...view more Brufasol® Yellow AL 2301 is a surface-modified bismuth vanadate pigment. It is easily dispersible and offers increased color strength. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternative to a chrome yellow with high opacity and has excellent weather fastness. This product is widely used in coil coating, powder coating, automotive coating, construction coating, plastic, masterbatch and more. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufasol® Yellow AL 30 Bismuth Vanadate PY184 | Bruchsaler Farbenfabrik | .Brufasol® Yellow AL 30 is a powdered bismuth vanadate pigment. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternative to a chrome yellow with high opacity and has excellent weather fastn...view more .Brufasol® Yellow AL 30 is a powdered bismuth vanadate pigment. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternative to a chrome yellow with high opacity and has excellent weather fastness. This product is widely used in coil coating, powder coating, automotive coating, construction coating, plastic, polymers, masterbatch and more. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufasol® Yellow AL 40 Bismuth Vanadate PY184 | Bruchsaler Farbenfabrik | Brufasol® Yellow AL 40 is a bismuth vandate pigment that is more reddish shaded than AL 30. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternative to a chrome yellow with high opacity and...view more Brufasol® Yellow AL 40 is a bismuth vandate pigment that is more reddish shaded than AL 30. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternative to a chrome yellow with high opacity and has excellent weather fastness. This product is widely used in coil coating, powder coating, automotive coating, construction coating, plastic, masterbatch and more. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufatec® Orange 29070 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufatec® Orange 29070 is an organic/inorganic hybrid pigment, based on bismuth vanadate yellow (PY184). The color shade is close to Cadmium Orange and Red. This product is a top resistant pigment and is an alternative to a chrome yellow with high opacity...view more Brufatec® Orange 29070 is an organic/inorganic hybrid pigment, based on bismuth vanadate yellow (PY184). The color shade is close to Cadmium Orange and Red. This product is a top resistant pigment and is an alternative to a chrome yellow with high opacity and has excellent weather fastness. This product is widely used in coil coating, powder coating, automotive coating, construction coating, plastic, masterbatch and more. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufatec® Orange H 29070 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufatec® Orange H 29070 is an organic/inorganic hybrid pigment, based on Bismuth Vanadate yellow. The color shade is close to Cadmium Orange and Red. This product is a top resistant pigment. All our products are lead and chrome free and are an excellent ...view more Brufatec® Orange H 29070 is an organic/inorganic hybrid pigment, based on Bismuth Vanadate yellow. The color shade is close to Cadmium Orange and Red. This product is a top resistant pigment. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| Brufatec® Red 29100 based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufatec® Red 29100 is an organic/inorganic hybrid pigment, based on bismuth vanadate yellow (PY184). The color shade is close to Cadmium Orange and Cadmium Red. This product is a top resistant pigment and is an alternative to a chrome yellow with high op...view more Brufatec® Red 29100 is an organic/inorganic hybrid pigment, based on bismuth vanadate yellow (PY184). The color shade is close to Cadmium Orange and Cadmium Red. This product is a top resistant pigment and is an alternative to a chrome yellow with high opacity and has excellent weather fastness. This product is widely used in coil coating, powder coating, automotive coating, construction coating, plastic, masterbatch and more. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. view less | Request Sample |
| BYK-011 | BYK | BYK-011 is a silicone-free, polymer-based defoamer for aqueous coating systems (also radiation curable systems). It is particularly recommended for two pack polyurethane systems and offers very good recoatability. | |
| BYK®-012 | BYK | BYK®-012 is a compound of foam-destroying polymers and hydrophobic particles. This product is especially suitable for defoaming emulsion paints and plasters with a PVC-range of 30-85, where it prevents foam during production and application. The product i...view more BYK®-012 is a compound of foam-destroying polymers and hydrophobic particles. This product is especially suitable for defoaming emulsion paints and plasters with a PVC-range of 30-85, where it prevents foam during production and application. The product is silicone- and mineral oil-free and is specifically recommended for VOC-free systems. The additive shows optimum efficiency at low dosage, is acid and alkaline resistant and can be used in a pH-range of 3 - 12. The product may lead to turbidity and seeding in clear coats. view less | |
| BYK®-014 | BYK | BYK®-014 is a mixture of foam-destroying polymers, fat derivatives and hydrophobic particles. This product shows excellent defoaming properties in various emulsion types such as acrylates, styrene acrylics or VAE´s (vinyl acetate ethylene). It is especial...view more BYK®-014 is a mixture of foam-destroying polymers, fat derivatives and hydrophobic particles. This product shows excellent defoaming properties in various emulsion types such as acrylates, styrene acrylics or VAE´s (vinyl acetate ethylene). It is especially suitable for defoaming emulsion paints and plasters with a PVC range of 30-85. The product is silicone-free and mineral oil-free and is specifically recommended for VOC-free systems. The additive shows optimum efficiency at low dosage, is acid and alkaline resistant, and can be used in a pH range of 3 - 12. view less | |
| BYK-015 | BYK | BYK-015 is a silicone-free, polymer-based defoamer with anti-popping properties for aqueous coatings. Particularly recommended for automotive and industrial coatings. | |
| BYK®-016 | BYK | BYK®-016 is a compound of foam-destroying polymers and hydrophobic particles. It is a very effective silicone- and mineral oil free defoamer. It has no negative influence on the printing behavior and does not cause defects in the typography. At the time o...view more BYK®-016 is a compound of foam-destroying polymers and hydrophobic particles. It is a very effective silicone- and mineral oil free defoamer. It has no negative influence on the printing behavior and does not cause defects in the typography. At the time of publication the active compound in BYK-016 fully meets all requirements of the European Union for "materials and articles in contact with foodstuffs“, and complies with FDA 21 CFR § 175.105, 175.300, 175.320, 176.200, 176.210. view less | |
| BYK®-017 | BYK | BYK®-017 is a compound of foam destroying polysiloxanes and hydrophobic solids. It is especially suited for defoaming millbases during dispersion and subsequent processing. The product is an excellent defoamer for glycol pastes and aqueous pigment concent...view more BYK®-017 is a compound of foam destroying polysiloxanes and hydrophobic solids. It is especially suited for defoaming millbases during dispersion and subsequent processing. The product is an excellent defoamer for glycol pastes and aqueous pigment concentrates. It exhibits excellent defoaming during grinding and excellent storage stability. This results in improved grinding and handling of the final pigment concentrates and coatings. view less |
