| AddWorks® LXR™ 308 AP | Clariant Plastics & Coatings Ltd. | AddWorks® LXR 308 AP is an optimized mixture of an UV absorber with radical scavenger (HALS), mostly suitable for low color solventborne clearcoats and UV cured coatings applicatons. | |
| Ceridust® 1060 TP | Clariant Plastics & Coatings Ltd. | Ceridust® 1060 TP is a micronized polar modified wax based on renewable resource. | |
| Ceridust® 2051 | Clariant Plastics & Coatings Ltd. | Ceridust® 2051 is a micronized synthetic wax. | |
| Ceridust® 3251 | Clariant Plastics & Coatings Ltd. | Ceridust® 3251 is a micronized, modified polyethylene wax. | |
| Ceridust® 3610 | Clariant Plastics & Coatings Ltd. | Ceridust® 3610 is a micronized high density polyethylene wax. | |
| Ceridust® 3620 | Clariant Plastics & Coatings Ltd. | Ceridust® 3620 is a micronized polyethylene wax. | |
| Ceridust® 3715 | Clariant Plastics & Coatings Ltd. | Ceridust® 3715 is a micronized, polar modified polyethylene wax recommended for solvent and water based coatings and inks. | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 3920 F | Clariant Plastics & Coatings Ltd. | Ceridust® 3920 F is a micronized, polytetrafluoroethylene modified polyethylene wax. | |
| Ceridust® 5551 | Clariant Plastics & Coatings Ltd. | Ceridust® 5551 is a micronized, partly saponified ester of montanic acids. | |
| Ceridust® 6721 | Clariant Plastics & Coatings Ltd. | Ceridust® 6721 is a micronized, amide modified polypropylene wax. | |
| Ceridust® 8020 | Clariant Plastics & Coatings Ltd. | Ceridust® 8020 is a micronized, highly modified copolymer wax. | |
| Ceridust® 9202 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9202 F is a micronized polytetrafluoroethylene. | |
| Ceridust® 9205 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9205 F is a micronized polytetrafluorethylene. | |
| Ceridust® 9615 A | Clariant Plastics & Coatings Ltd. | Ceridust® 9615 A is a micronized blend of polyethylene and amide wax. | |
| Ceridust® 9630 F | Clariant Plastics & Coatings Ltd. | Ceridust® 9630 F is a polytetrafluoroethylene modified polyethylene wax. | |
| Exolit® AP 420 | Clariant Plastics & Coatings Ltd. | Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate. | |
| Exolit® AP 422 | Clariant Plastics & Coatings Ltd. | Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. | |
| Exolit® AP 423 | Clariant Plastics & Coatings Ltd. | Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and ...view more Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. view less | |
| Exolit® AP 462 | Clariant Plastics & Coatings Ltd. | Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-parti...view more Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. view less | |
| Exolit® AP 740 | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlor...view more Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. view less | |
| Exolit® AP 740 F | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from c...view more Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. view less | |
| Exolit® AP 750 | Clariant Plastics & Coatings Ltd. | Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability....view more Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. view less | |
| Exolit® IFR 36 | Clariant Plastics & Coatings Ltd. | Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants...view more Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access. view less | |
| Hordaphos® 124 | Clariant Plastics & Coatings Ltd. | Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic ...view more Hordaphos® 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos® 124 is soluble in common organic solvents such as aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters and ketones. It can be emulsified with water. view less | |
| Hordaphos® 222 | Clariant Plastics & Coatings Ltd. | Hordaphos® 222 is a clear, colourless to yellowish liquid with an ester-like odour. It has reacts acidic and can be neutralized with organic and inorganic bases. Hordaphos® 222 is emulsifiable in water and soluble in common organic solvents. | |
| Hordaphos® MDAH | Clariant Plastics & Coatings Ltd. | Hordaphos® MDAH is a clear, colourless to yellowish liquid with an ester-like odour that may darken during storage. The product is soluble in organic solvents. When the ester is neutralized, it is emulsifiable in water. | |
| Hordaphos® MDB | Clariant Plastics & Coatings Ltd. | Hordaphos® MDB is a multi-functional additive which can be used in various applications, especially in printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. | |
| Hordaphos® MOB | Clariant Plastics & Coatings Ltd. | Hordaphos® MOB is a multi-functional additive for various applications, especially for printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. | |
| Hostaphat® TBEP HQ | Clariant Plastics & Coatings Ltd. | Hostaphat® TBEP HQ is a phosphate ester used as plasticizer for polymer dispersions. | |
| Hostavin® 3051 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3051 is a low molecular weight hindered amine light stabilizer (HALS), characterized by its low volatility and good migration properties and enhanced Tribo effect for powder coating. | |
| Hostavin® 3051-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3051-2 disp. is a 52% aqueous dispersion of a low molecular radical scavenger (HALS). It is characterized by its easy incorporation, broad compatibility and low volatility. | |
| Hostavin® 3053 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3053 is the 80% solution of a low molecular weight hindered amine light stabilizer (HALS) in xylene. It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3055 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3055 is a low molecular weight hindered amine light stabilizer (HALS). It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3058 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency...view more Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency. view less | |
| Hostavin® 3065 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3065 is a 100% liquid low molecular weight radical scavenger (HALS). It is characterized by its good solubility, broad compatibility and good stabilization efficiency in all kind of coatings. | |
| Hostavin® 3070 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration ...view more Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for plastic coatings and architectural façade coatings. Hostavin® 3070 DISP has been awarded with an EcoTain® label resulting from its excellent toxicological profile. view less | |
| Hostavin® 3070 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique...view more Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique solubility in solvent-borne coatings. view less | |
| Hostavin® 3225-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3225-2 disp. is a 52 % aqueous dispersion of a mixture of a halogenated benzotriazole UV-absorber with a radical scavenger (HALS). | |
| Hostavin® 3315 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extracti...view more Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for wood and plastics coatings. Hostavin 3315 DISP has been awarded with an EcoTain label resulting from its excellent toxicological profile. view less | |
| Hostavin® 3326 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatin...view more Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatings. view less | |
| Hostavin® 3326 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 is an UV absorber with broad absorption. Besides cooling application it is mainly used as an UV stabilizer for a wide range of plastics. | |
| Kemapox® EM 260 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coating...view more Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 77000-120000 mPas at 23°C. view less | |
| Kemapox® EM 267 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be ...view more Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 5000 mPas at 23°C. view less | |
| Kemapox® HF 308 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°...view more Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 210 mPas at 23°C. view less | |
| Kemapox® HF 317 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also...view more Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also suitable for castings with an extended pot life. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
| Kemapox® HF 321 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 321 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 22 mPas at 23°C. | |
| Kemapox® HF 324 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 324 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 26 mPas at 23°C. | |
| Kemapox® HF 326 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at ...view more Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
| Kemapox® HF 328 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 328 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in epoxy systems for primers and coatings for solvent-free systems. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 150 mPas at 23°C. | |
| Kemapox® HF 331 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mP...view more Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mPas at 23°C. view less | |
| Kemapox® HF 332 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications...view more Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications, coatings, and mortars. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. view less | |
| Kemapox® HF 337 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient tempera...view more Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient temperatures. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
| Kemapox® HF 338 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 338 is a modified aliphatic polyamine epoxy hardener. This product is designed for primers and darker colored coatings and mortars for solvent-free systems. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 200 mPas at 23°C. | |
| Kemapox® HF 339 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 ...view more Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
| Kemapox® HF 340 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It ...view more Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 60 mPas at 23°C. view less | |
| Kemapox® HF 343 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 343 is a modified aliphatic polyamine epoxy hardener. This product is designed for systems where elastic and tough self-leveling floors and coatings are required. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. | |
| Kemapox® HF 346 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/...view more Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 70 mPas at 23°C. view less | |
| Kemapox® HF 349 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C a...view more Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 50 mPas at 23°C. view less | |
| Kemapox® HF 366 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkal...view more Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvent is required. It has a density of 1.00 g/cm3 at 23°C and a viscosity of 1500 mPas at 23°C. view less | |
| Kemapox® HF 367 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkali...view more Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvents is required. It has a density of 1.10 g/cm3 at 23°C and a viscosity of 1100 mPas at 23°C. view less | |
| Kemapox® HF 369 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis an...view more Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis and solvents is required. It can also be used to accelerate slow-setting systems such as tar-epoxy coatings or mortars. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 1900 mPas at 23°C. view less | |
| Kemapox® HF 381 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 28000 mPas at 23°C. view less | |
| Kemapox® HF 383 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 4000 mPas at 25°C. view less | |
| Kemapox® HF 385 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 18000 mPas at 25°C. view less | |
| Kemapox® HF 388 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 9000 mPas at 23°C. view less | |
| Kemapox® HW 500 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and floorin...view more Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 2000 mPas at 25°C. view less | |
| Kemapox® HW 502 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring application...view more Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.08 g/cm3 at 23°C and a viscosity of 17000 mPas at 25°C. view less | |
| Kemapur® PCU 200 S | CTP Egypt S.A.E. CTP Original | Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring appli...view more Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring applications. view less | |
| Licocene® PE 4201 powder | Clariant Plastics & Coatings Ltd. | Licocene® PE 4201 powder is a low viscous, non-polar polyethylene wax that is a highly efficient lubricant. | |
| Licocene® PE 5301 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE 5301 granules is a low viscosity, high melting point Metallocene catalyzed Polyethylene wax. | |
| Licocene® PE MS 431 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax. | |
| Licowax® 371 FP | Clariant Plastics & Coatings Ltd. | Licowax® 371 FP is an oxidized ethylene vinyl acetate (EVA) wax. | |
| Licowax® E flakes | Clariant Plastics & Coatings Ltd. | Licowax® E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain the...view more Licowax® E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. view less | |
| Licowax® KPS flakes | Clariant Plastics & Coatings Ltd. | Licowax® KPS flakes is an ester of montanic acids with multifunctional alcohols. | |
| Licowax® KSL flakes | Clariant Plastics & Coatings Ltd. | Licowax® KSL flakes is an ester of montanic acids with multifunctional alcohols. | |
| Licowax® OP flakes | Clariant Plastics & Coatings Ltd. | Licowax® OP flakes is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. | |
| Licowax® OP powder | Clariant Plastics & Coatings Ltd. | Licowax® OP powder is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. | |
| Licowax® PE 190 powder | Clariant Plastics & Coatings Ltd. | Licowax® PE 190 powder is a non-polar high density polyethylene with low molecular weight. | |
| Licowax® PED 153 | Clariant Plastics & Coatings Ltd. | Licowax® PED 153 is an oxidized, high density polyethylene wax. | |
| Licowax® PED 191 powder | Clariant Plastics & Coatings Ltd. | Licowax® PED 191 powder is an oxidized, high density polyethylene wax with high molecular weight. | |
| Licowax® PED 521 granules | Clariant Plastics & Coatings Ltd. | Licowax® PED 521 granules is an oxidized polyethylene wax. | |
| Licowax® PED 522 granules | Clariant Plastics & Coatings Ltd. | Licowax® PED 522 granules is an oxidized, high density polyethylene wax. | |
| Licowax® S flakes | Clariant Plastics & Coatings Ltd. | Licowax® S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properti...view more Licowax® S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properties). view less | |
| Tonerwax P 110 | Clariant Plastics & Coatings Ltd. | Tonerwax P 110 is a hydrocarbon wax with sharp melting point. |
