AK-75 | DKSH | AK-75 is a variety of two-component Polyurethane Coating that can be used as hardener. This product is available in Spain, Portugal, France, and Italy. | Request Sample |
AP1040 | DKSH | AP1040 is low viscosity, reactive, Phenalkamine hardener for epoxy resin based lacquers and coatings. This product is available in Spain, Portugal, France, Italy, Nordics. | Request Sample |
AP1041 | DKSH | AP1041 is High Viscosity, reactive, Mannich- based amine hardener for epoxy resins based lacquers and coatings. This product is available in Spain, Portugal, France, Italy, Nordics. | Request Sample |
AP1058 | DKSH | AP1058 is low viscosity, reactive, light colour Phenalkamine hardener for epoxy resins based lacquers and coatings. This product is available in Spain, Portugal, France, Italy, Nordics. | Request Sample |
Docure KC-305H | Kukdo Chemical Co., Ltd. | Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...view more Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. view less | |
Docure KC-335H | Kukdo Chemical Co., Ltd. | Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...view more Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. view less | |
Domide GX-328B75 | Kukdo Chemical Co., Ltd. | Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curi...view more Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. view less | |
Domide GX-328K | Kukdo Chemical Co., Ltd. | Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...view more Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. view less | |
Domide GX-422 | Kukdo Chemical Co., Ltd. | Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for fo...view more Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. view less | |
Domide GX-450TI60 | Kukdo Chemical Co., Ltd. | Domide GX-450TI60 is a Polyamide / Epoxy adduct dissolved in Toluene/Iso-propanol for reaction with solid Epoxy Resins. GX-450TI60 is useful in maintenance coatings and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
Domide GX-450XB70 | Kukdo Chemical Co., Ltd. | Domide GX-450XB70 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-450XB70 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...view more Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. view less | |
Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...view more Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. view less | |
Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...view more DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. view less | |
Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy cost...view more Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy costs and offering the powder coater flexibility in curing conditions as well as the possibility to coat heat sensitive substrates are the advantages. When medium and low gloss finishes are desired, Epoxy Hardener G-91 can be used in combination with Epomatt G-152 to formulate powder coatings with a wide range of possible gloss levels. view less | |
Grilonit® H 81016 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins. | |
Grilonit® H 82044 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82044 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a low yellowing tendency and low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
Grilonit® H 82062 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82062 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a short pot life, and after full cure a low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
Grilonit® H 84024 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, c...view more Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy resins. view less | |
Grilonit® H 84026 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing ag...view more Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing agent with liquid epoxy resins. view less | |
Grilonit® H 84043 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84043 is a modified cycloaliphatic polyamine adduct that has good flow properties, low carbamate tendency, and low yellowing tendency. This product is used as a slow amine for self-levelling mortars. | |
HS2266 | Tianyi Chemical Engineering Material Co., Ltd. | HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. Th...view more HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. This product has a pH value between 8.0 and 9.0. It has a density between 1.08 and 1.12 g/cm3. view less | |
HS2288 | Tianyi Chemical Engineering Material Co., Ltd. | HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/...view more HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/cm3. view less | |
Kemapox® HF 308 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°...view more Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 210 mPas at 23°C. view less | |
Kemapox® HF 317 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also...view more Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also suitable for castings with an extended pot life. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
Kemapox® HF 321 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 321 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 22 mPas at 23°C. | |
Kemapox® HF 324 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 324 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 26 mPas at 23°C. | |
Kemapox® HF 326 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at ...view more Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
Kemapox® HF 328 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 328 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in epoxy systems for primers and coatings for solvent-free systems. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 150 mPas at 23°C. | |
Kemapox® HF 331 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mP...view more Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mPas at 23°C. view less | |
Kemapox® HF 332 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications...view more Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications, coatings, and mortars. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. view less | |
Kemapox® HF 337 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient tempera...view more Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient temperatures. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
Kemapox® HF 338 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 338 is a modified aliphatic polyamine epoxy hardener. This product is designed for primers and darker colored coatings and mortars for solvent-free systems. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 200 mPas at 23°C. | |
Kemapox® HF 339 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 ...view more Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
Kemapox® HF 340 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It ...view more Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 60 mPas at 23°C. view less | |
Kemapox® HF 343 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 343 is a modified aliphatic polyamine epoxy hardener. This product is designed for systems where elastic and tough self-leveling floors and coatings are required. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. | |
Kemapox® HF 346 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/...view more Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 70 mPas at 23°C. view less | |
Kemapox® HF 349 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C a...view more Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 50 mPas at 23°C. view less | |
Kemapox® HF 366 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkal...view more Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvent is required. It has a density of 1.00 g/cm3 at 23°C and a viscosity of 1500 mPas at 23°C. view less | |
Kemapox® HF 367 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkali...view more Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvents is required. It has a density of 1.10 g/cm3 at 23°C and a viscosity of 1100 mPas at 23°C. view less | |
Kemapox® HF 369 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis an...view more Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis and solvents is required. It can also be used to accelerate slow-setting systems such as tar-epoxy coatings or mortars. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 1900 mPas at 23°C. view less | |
Kemapox® HF 381 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 28000 mPas at 23°C. view less | |
Kemapox® HF 383 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 4000 mPas at 25°C. view less | |
Kemapox® HF 385 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 18000 mPas at 25°C. view less | |
Kemapox® HF 388 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 9000 mPas at 23°C. view less | |
Kemapox® HW 500 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and floorin...view more Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 2000 mPas at 25°C. view less | |
Kemapox® HW 502 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring application...view more Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.08 g/cm3 at 23°C and a viscosity of 17000 mPas at 25°C. view less | |
Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...view more Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. view less | |
Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...view more Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. view less | |
Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...view more Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. view less | |
Luna-cure PACM | DKSH | Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents ...view more Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents and water. This product is available in Europe, Asia and North America. view less | Request Sample |
SIRION® VP 2080 | SIR Industriale SpA | SIRION® VP 2080 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a polyacrylate flow modifier and curing accelerator, has good flow, and moderate reactivity. This product is well suited for use i...view more SIRION® VP 2080 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a polyacrylate flow modifier and curing accelerator, has good flow, and moderate reactivity. This product is well suited for use in protective and high gloss powder coating. view less | |
SIRION® VP 2083 | SIR Industriale SpA | SIRION® VP 2083 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a polyacrylate flow modifier and curing accelerator, has good flow, and very high reactivity. This product is well suited for use ...view more SIRION® VP 2083 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a polyacrylate flow modifier and curing accelerator, has good flow, and very high reactivity. This product is well suited for use in powder coating. view less | |
SIRION® VP 2084 | SIR Industriale SpA | SIRION® VP 2084 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a curing accelerator, has good flow, and medium reactivity. This product is well suited for use in protective or decorative powder...view more SIRION® VP 2084 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a curing accelerator, has good flow, and medium reactivity. This product is well suited for use in protective or decorative powder coating. view less | |
SIRION® VP 2085 | SIR Industriale SpA | SIRION® VP 2085 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It is compatible with epoxy resins. This product is useful for optimizing the reactivity of powder coating formulations that contain a curing ...view more SIRION® VP 2085 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It is compatible with epoxy resins. This product is useful for optimizing the reactivity of powder coating formulations that contain a curing accelerator. This product is well suited for use in protective or decorative powder coatings. view less | |
WANAMINE® MDA-100 Diaminodiphenyl Methane | Wanhua Chemical Group Co., Ltd. | WANAMINE® MDA-100 is pure Diaminodiphenyl Methane (MDA) and contains at least 99% of 4,4'-MDA and few of 2,4'-MDA.Molecular weight is198.26, at room temperature, it is white to yellowish crystal. WANAMINE® MDA-100 series product is an important chemica...view more WANAMINE® MDA-100 is pure Diaminodiphenyl Methane (MDA) and contains at least 99% of 4,4'-MDA and few of 2,4'-MDA.Molecular weight is198.26, at room temperature, it is white to yellowish crystal. WANAMINE® MDA-100 series product is an important chemical industry intermediate. Besides being used in producing MDI and HMDI, it is widely used in PI, PEI, epoxy resin hardener, performance thermoplastic, chain extender of PU elastomer etc. The products synthesized with it have excellent properties of mechanics, electrical-insulation, heat-resisting, radiation-resisting and abrasion-resisting. view less |