| HARDLEN 15-LP | DKSH | HARDLEN 15-LP is and adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN 15-LP has suitable properties for printing ink on polypropylene films. HARDLEN 15-LP has the following properties: excellent adhesion to untreated p...view more HARDLEN 15-LP is and adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN 15-LP has suitable properties for printing ink on polypropylene films. HARDLEN 15-LP has the following properties: excellent adhesion to untreated polypropylene films and good solubility in solvent (Toluene). This product is available in Europe and North America. view less | Request Sample |
| HARDLEN CY-1321P | DKSH | HARDLEN CY-1321P is an adhesion promoter for polyolefin. It is focued on the solution stability which Chlorinated Polyolefin with maleic anhydride groups is dissolved in. A Paint which contains CY-1321P does not generate gel even at low temperature due to...view more HARDLEN CY-1321P is an adhesion promoter for polyolefin. It is focued on the solution stability which Chlorinated Polyolefin with maleic anhydride groups is dissolved in. A Paint which contains CY-1321P does not generate gel even at low temperature due to our new modification method. HARDLEN CY-1321P main characteristics are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, good air-dry adhesion originated from the polymer design, easily dissolves in toluene, xylene or other aromatic hydrocarbon solvents and easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN CY-9122P | DKSH | HARDLEN CY-9122P is an adhesion promoter for polyolefin. It has a good adhesion to polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9122P: Good adhesion to PP,TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without so...view more HARDLEN CY-9122P is an adhesion promoter for polyolefin. It has a good adhesion to polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9122P: Good adhesion to PP,TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments ,such as "framing treatment", Good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, Excellent resistance against Water, Humidity and Gasoline after top-coating, Easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons and easy dissolving in non-aroma solvents such as Methyl-cyclohexane or Ester mixture. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN CY-9124P | DKSH | HARDLEN CY-9124P is an adhesion promoter for polyolefin. It has a good adhesion to Polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9124P are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates wit...view more HARDLEN CY-9124P is an adhesion promoter for polyolefin. It has a good adhesion to Polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9124P are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", Good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, Excellent resistance against Water, Humidity and Gasoline after top-coating, Easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons and easy dissolving in non-aroma solvents such as Methyl-cyclohexane or Ester mixture. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN DX-523P | DKSH | HARDLEN DX-523P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX.523P has the following characteristics: excellent solubility in various solvents...view more HARDLEN DX-523P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX.523P has the following characteristics: excellent solubility in various solvents and solution stability is very good at low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN DX-526P | DKSH | HARDLEN DX-526P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-526 has the following characteristics: excellent solubility in various solvents ...view more HARDLEN DX-526P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-526 has the following characteristics: excellent solubility in various solvents and solution stability is very good at low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN DX-530P | DKSH | HARDLEN DX-530P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-530P has the following characteristics: excellent solubility in various solvents...view more HARDLEN DX-530P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-530P has the following characteristics: excellent solubility in various solvents and solution stability is very good at low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN F-2P | DKSH | HARDLEN F-2P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN F-2P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN ...view more HARDLEN F-2P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN F-2P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN F-2P main characteristics are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol resistance after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN F-6P | DKSH | HARDLEN F-6P is an adhesion promoter for polyolefin. HARDLEN F-6P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatment such as plasma, flame and surface-cleaning by solvent. HARDLEN F-6P main characteristics are: good adhesion ...view more HARDLEN F-6P is an adhesion promoter for polyolefin. HARDLEN F-6P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatment such as plasma, flame and surface-cleaning by solvent. HARDLEN F-6P main characteristics are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint. (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol resistance after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN HM-21P | DKSH | HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARD...view more HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN HM-21P main characteristics are: good adhesion to PP, TPO(Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatment, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint, excellent resistance against Water, Gasoline and Gasohol after top-coating. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN M-28P | DKSH | HARDLEN M-28P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN M-28P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLE...view more HARDLEN M-28P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN M-28P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN M-28P main characteristics are good adhesion to PP, TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments ,such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less | Request Sample |
| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less |
