| BYK®-350 | BYK | BYK®-350 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate shows a wide compatibility with many binder systems and works best in medium polar systems.The additive is especially suitable in baking systems, but it...view more BYK®-350 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate shows a wide compatibility with many binder systems and works best in medium polar systems.The additive is especially suitable in baking systems, but it can also be used in 2 pack polyester, acrylate or epoxy systems. In UV-Systems, BYK-350 will give a good defoaming effect beside improvement of leveling. BYK-350 is used in Industrial Coatings, Automotive OEM, Coil Coating and Can Coating systems for improvement of leveling and increase of gloss. view less | |
| BYK-352 | BYK | BYK-352 is a polyacrylate-based surface additive for solvent-borne and solvent-free systems. Standard leveling additive with air release properties. | |
| BYK®-354 | BYK | BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tens...view more BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. These additives are thermally stable. Due to its high molecular weight and its unpolar structure, BYK-354 has both leveling and air release properties. view less | |
| BYK®-355 | BYK | BYK®-355 is a solution of a polyacrylate. This product is mainly used as a leveling additive in industrial coatings, OEM and automotive refinish formulations, as well as in coil coatings. | |
| BYK®-356 | BYK | BYK®-356 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate is the solvent-free version of BYK-355. | |
| BYK®-356 For Powder | BYK | BYK®-356 For Powder anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is the solvent-free version of BYK-355. | |
| BYK-3566 | BYK | BYK-3566 is a surface-active additive to improve leveling and increase the surface energy of aqueous, solvent borne, UV and 100 % systems with moderate anti-cratering properties. | |
| BYK®-359 | BYK | BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slig...view more BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced, and these additives are thermally stable. BYK-359 is mainly used as a leveling and anti-cratering additive in industrial coatings and coil coatings. Additionally it acts as a defoaming and air release agent. view less | |
| BYK®-360 P | BYK | BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additio...view more BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additionally, BYK-360 P prevents surface defects specific to powder coatings such as craters, pinholes and fisheyes. view less | |
| BYK®-361 N | BYK | BYK®-361 N is a polyacrylate that is the solvent-free version of BYK-358 N. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability o...view more BYK®-361 N is a polyacrylate that is the solvent-free version of BYK-358 N. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. These additives are thermally stable. view less | |
| BYK®-368 P | BYK | BYK®-368 P is a standard anti-crater and leveling additive for powder coatings to avoid fish eyes and other surface defects. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, p...view more BYK®-368 P is a standard anti-crater and leveling additive for powder coatings to avoid fish eyes and other surface defects. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product acts as an anti-cratering and leveling additive for especially critical systems. It reduces orange peel by improving the leveling of the powder coating film. Pinholes, fish eyes and other surface defect are efficient avoided. BYK-368 P is also suitable for UV curing systems. view less | |
| BYK®-381 | BYK | BYK®-381 is a leveling additive for aqueous systems. It is a solution of a polyacrylate, ionic. This product is an acrylic leveling additive which improves only leveling and has no effect on surface tension. | |
| BYK®-3900 P | BYK | BYK®-3900 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product is a very effective leveling and anti-crater additive for especially critica...view more BYK®-3900 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product is a very effective leveling and anti-crater additive for especially critical powder coating systems. It improves the tolerance of the powder coating system towards contamination which might occur during production or application of powder coatings ("post-wetting effect“). As a result BYK-3900P prevents craters, pinholes and other surface defects in powder coatings. BYK-3900P is also suitable for UV-curing powder coating systems. view less | |
| BYK®-3902 P | BYK | BYK®-3902 P is a leveling additive for powder coatings. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane, and acrylics. BYK-3902 P is a new innovati...view more BYK®-3902 P is a leveling additive for powder coatings. It is a polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane, and acrylics. BYK-3902 P is a new innovative leveling additive for powder coatings. Due to its excellent dispersibility the additive improves leveling and gloss in powder coatings. It prevents impurities, craters and fish eyes. BYK-3902 P can be used in all kinds of powder coating formulations and is especially suited for thin layer systems due to its dispersibility. view less | |
| BYK®-3931 P | BYK | BYK®-3931 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-3931 P is a very effective anti-crater additive which should be used in combination w...view more BYK®-3931 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-3931 P is a very effective anti-crater additive which should be used in combination with standard leveling additives. In especially sensitive powder coatings, BYK-3931 P enhances the effectiveness of standard additives and prevents surface craters, fish eyes and pinholes due to its air/coating interfacial activity. The result is smooth and perfect leveling. BYK-3931 P is especially recommended for binder-rich formulations which are more sensitive to cratering. view less | |
| BYK®-3933 P | BYK | BYK®-3933 P is a modified polyacrylate, adsorbed on silicon dioxide. BYK-3933 P is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. Contrary to the standard leveling additives, BYK-3933 P has a multifunct...view more BYK®-3933 P is a modified polyacrylate, adsorbed on silicon dioxide. BYK-3933 P is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. Contrary to the standard leveling additives, BYK-3933 P has a multifunctional performance profile. view less | |
| BYK-397 | BYK | BYK-397 is a silicone-and fluorine-free leveling additive for solvent-borne coating systems with excellent defoaming properties. | |
| CRAYVALLAC® A-2201-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has be...view more CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film effects such as craters, fisheyes, orange peel and pinholes are reduced and a superior overall appearance of the film is visible. CRAYVALLAC® A-2201-M can be used as well as an air release agent in solvent-based high solids systems applied by airless spray. view less | Request Sample |
| CRAYVALLAC® A-2678-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film forma...view more CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film formation. The following benefits are to be gained by using CRAYVALLAC® A-2678-M in water based coatings: Enhanced substrate wetting and coating leveling, Reduced craters, fisheyes and pinhole. The results of these enhancements are smoother films with fewer imperfections and a superior overall appearance (measurable with glow and DOI) when compared with the unmodified coating. view less | Request Sample |
| CRAYVALLAC® A-620-A2 | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has bee...view more CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film deffects such as craters, fisheyes, orange peel and pinholes are reduced and a superior overall appearance of the film is visible. view less | Request Sample |
| CRAYVALLAC® FLOW-100 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings...view more CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings and coatings in general e.g. solvent-based, high solids and solvent-free. view less | Request Sample |
| Efka® 3570 | BASF Formulation Additives | Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion...view more Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion problems. This slightly hazy, yellowish liquid is recommended for use in all kinds of water-based coatings with a pH value > 7.6. view less | |
| Luna-flow K F505 | DKSH | Luna-flow K F505 is a masterbatch of an acrylic polymer in carboxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 10% of thermoplastic acrylic polymer. | Request Sample |
| Luna-flow K F615 | DKSH | Luna-flow K F615 is a masterbatch of an acrylic polymer in hydroxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 15% of thermoplastic acrylic polymer. | Request Sample |
| MODAFLOW® 2100 | Allnex | Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion. | Request Sample |
| MODAFLOW® 9200 | Allnex | Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion. | Request Sample |
| Perenol® F 40 | BASF Formulation Additives | Perenol® F 40 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, Perenol® F 40 modifies the surface tension of the coating...view more Perenol® F 40 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, Perenol® F 40 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. Perenol® F 40 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part Perenol® F 40. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents applied on SiO2 are avoided. In particular, pigmented and transparent powder coatings with excellent levelling properties are obtained for the production of weatherproof powder coatings. view less | |
| PIDIFLOW FL 14 (V) | Pidilite Industries Ltd. - Resins Division | PIDIFLOW FL 14 (V) is a silicone free acrylic flow and leveling agent that has good compatibility with most of the resin systems such as alkyd, polyester, epoxy, acrylic etc. | |
| PIDIFLOW FL 18 | Pidilite Industries Ltd. - Resins Division | PIDIFLOW FL 18 is a silicone free acrylic flow and leveling agent that has good compatibility with most of the resin systems such as alkyd, polyester, epoxy, acrylic etc. | |
| PIDIFLOW FL 20 | Pidilite Industries Ltd. - Resins Division | PIDIFLOW FL 20 is a silicone free acrylic flow and leveling agent that has good compatibility with most of the resin systems such as alkyd, polyester, epoxy, acrylic etc. | |
| Powdermate® 462PFL | Arxada – Troy Corporation | Powdermate® 462PFL enhances the flow and leveling of pigmented coatings, and helps to eliminate cratering, orange peel, and pinholing, thereby providing uniform surface appearance. It is suitable for master batch applications. | |
| Resiflow FL 2 | Worlée-Chemie G.m.b.H. | Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorpo...view more Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorporating 0.2 - 2.0% of the agent into total formulation. Resiflow FL 2 is designed for powder coatings, solvent based coatings, high solids, coil coatings and UV-coatings. Printing inks based on flexographic or silk screen have also shown improved characteristics. view less | |
| Resiflow FL 9 | Worlée-Chemie G.m.b.H. | Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellu...view more Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. Resiflow FL 9 will react with most thermosetting resins to form a cross linked system. It exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. view less | |
| Resiflow FM 4 | Worlée-Chemie G.m.b.H. | Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additional...view more Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. The method of incorporating this additive into coating systems does not affect its performance as long as it is uniformly dispersed in the system. This can be easily achieved by mixing Resiflow FM 4 with the other paint ingredients. view less | |
| Resiflow L-66F | Worlée-Chemie G.m.b.H. | Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and el...view more Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve the flexibility of coatings. view less | |
| Resiflow LH 241 | Worlée-Chemie G.m.b.H. | Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additio...view more Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additionally, Resiflow LH 241 is functional and self-crosslinking. During the cure cycle, it can react with the binder system of the thermoset coating and also crosslink with itself. Resiflow LH 241 is used to eliminate air entrapment, foam, orange peel, pinholes, craters and enhance resistance against dirt and stain. It can be used in polyester melamine, acrylics, alkyds, phenolics, epoxies, polyurethanes and other systems. view less | |
| Resiflow LW | Worlée-Chemie G.m.b.H. | Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of c...view more Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of coatings. Resiflow LW exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose its gloss when exposed to UV-radiation. view less | |
| Resiflow P 67 | Worlée-Chemie G.m.b.H. | Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flo...view more Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a silica carrier. Resiflow P 67 is convenient in handling and reliable in performance. It is also a UV stable product with excellent outdoor durability. view less | |
| Resiflow P-64F | Worlée-Chemie G.m.b.H. | Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically design...view more Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically designed to provide outstanding clarity in clear acrylic powder coatings. If applied at effective concentrations, it will correct surface imperfections and provide a smooth film with high distinctiveness of image (DOI). view less | |
| Resiflow PL 200 | Worlée-Chemie G.m.b.H. | Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids s...view more Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids surface imperfections as craters, pin-holes, orange peel effect etc. This product appears as a white powder. view less | |
| Resiflow PV 88 | Worlée-Chemie G.m.b.H. | Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommend...view more Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommended as a flow promoting agent for powder coating and injection molding compositions based on e.g. acrylic, epoxy, polyester, hybrid and polyurethane resins. Resiflow PV 88 is also suitable for polyester/glycoluril powder coatings. view less | |
| Resiflow W 52 | Worlée-Chemie G.m.b.H. | Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carbo...view more Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralization with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Resiflow W 5200 | Worlée-Chemie G.m.b.H. | Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This car...view more Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralisation with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| SCHWEGO® Foam 6354 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based ...view more SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based and solvent free paint systems. It improves levelling, prevents cratering and showing through the substrate. view less | |
| TEGO® Flow 300 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 300 compatible flow and leveling additive. It is a clear liquid solution of a polyacrylate. It has good flow promotion in clear coat, pigmented, and solventborne systems. TEGO® Flow 300's flow promotion does not affect surface energy nor surfa...view more TEGO® Flow 300 compatible flow and leveling additive. It is a clear liquid solution of a polyacrylate. It has good flow promotion in clear coat, pigmented, and solventborne systems. TEGO® Flow 300's flow promotion does not affect surface energy nor surface slip. It is used as the primer/basecoat and topcoat for lacquer coats. It has clear solubility in ethanol, white spirit, butyl acetate, and tripropylene glycol diacrylate (TPGDA). view less | Request Sample |
| TEGO® Flow 370 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 370 is a silicone-free acrylic leveling agent and shows excellent compability and flow promotion with additional defoaming properties. It is highly recommended for solventborne coatings especially for clear coatings. | Request Sample |
| TEGO® Flow 375 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's s...view more TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's surface energy or slip. It is used as the primer/basecoat and as the topcoat for lacquer coats, and is soluble in ethanol, white spirit, butyl acetate, and tripropylene glycol diacrylate (TPGDA). view less | Request Sample |
| TEGO® Flow 380 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 380 is a silicone-free acrylic leveling agent and shows good compatibility and flow promotion with additional anti-popping properties. It is highly recommended for solvent-borne coatings, especially clear coatings. | Request Sample |
| Troysol™ Z377 | Arxada – Troy Corporation | Troysol™ Z377 is an acrylic additive that improve the flow and leveling of non-aqueous systems. Troysol™ Z377 is highly effective in enhancing dusface smoothness and stabilizing surface tension gradients upon application and during cure. These characteris...view more Troysol™ Z377 is an acrylic additive that improve the flow and leveling of non-aqueous systems. Troysol™ Z377 is highly effective in enhancing dusface smoothness and stabilizing surface tension gradients upon application and during cure. These characteristics prevent the formtaion of surface defects such as crater, pinhole and orange peel, resulting in improved distinctness of image (DOI). Coatings retain good intercoat adhesion. Troysol™ Z377 is a silicone-free additive view less | |
| XOANONS® WE-D811 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D811 is a polyacrylate copolymer. It offers excellent compatibility in varnishes, as well as long-wave leveling ability and anti-orange peel. No screen off for shower coating. It is suitable for UV cure systems. Estimate the influence of re-co...view more XOANONS® WE-D811 is a polyacrylate copolymer. It offers excellent compatibility in varnishes, as well as long-wave leveling ability and anti-orange peel. No screen off for shower coating. It is suitable for UV cure systems. Estimate the influence of re-coat from over-baking. view less | |
| XOANONS® WE-D819B | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D819B is a polyacrylate copolymer. It offers excellent varnish compatibility, long-wave leveling ability, and anti-orange peel. No curtain break in shower coating. estimate the influence of re-coat from over-baking. | |
| XOANONS® WE-D846R | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D846R is a polyacrylate modified copolymer solution. It has excellent varnish compatibility, and does not cause haze. This product offers excellent long-wave leveling and anti-orange peel properties. | |
| XOANONS® WE-D887R | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D887R is a fluorocarbon modified polyacrylate copolymer solution. It offers excellent defoaming and foam-inhibition. This product provides long-wave leveling and prevent anti-orange-peel. Most of the applications are for coil and roll coating ...view more XOANONS® WE-D887R is a fluorocarbon modified polyacrylate copolymer solution. It offers excellent defoaming and foam-inhibition. This product provides long-wave leveling and prevent anti-orange-peel. Most of the applications are for coil and roll coating and epoxy floor paints. Not suitable for varnish and UV cure coating. view less |
