| 4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...view more 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. view less | Request Sample |
| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...view more CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. view less | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...view more CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. view less | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...view more CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. view less | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...view more CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. view less | |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...view more ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. view less | Request Sample |
| ECOPUD EW-10 | Ecopol Tech | ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to ...view more ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to previously dry surfaces. ECOPUD EW-10 is used in industries such as wood, graphic arts, lamination, footwear, textiles, paper, automotive, and construction. view less | Request Sample |
| ECOPUD-42-45 | Ecopol Tech | ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...view more ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. view less | Request Sample |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...view more ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. view less | Request Sample |
| EPOCROS™ WS-500 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It e...view more EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It exhibits crosslinking reaction at low temperature (80-120°C) with no by-product. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). EPOCROS™ WS-500 is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| EPOCROS™ WS-700 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crossl...view more EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It offers excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. EPOCROS™ WS-700 has a long pot life for one packaging. view less | Request Sample |
| Fumed Silica A 200R | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A 200R is a hydrophilic fumed silica with specific surface area around 180m2/g. It provides excellent dispersion and high thickening properties. Mainly be used for Medium transparent, high transparent silicone sealant adhesive. | |
| Fumed Silica A-200 | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A-200 is a hydrophilic fumed silica with specific surface area around 200m2/g. It is ideal for use in high temperature silicon rubber, adhesive and sealants, and paints, coatings and printing inks. | |
| Fumed Silica A-200K | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A-200K is a hydrophilic fumed silica with specific surface area around 200m2/g. It is ideal for use as an electronic sealant and a ceramic tile sealant. | |
| Hydrophobic Fumed Silica R1202 | Ningxia Futael Silicon Industry Co.,LTD | Hydrophobic Fumed Silica R1202 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, excellent thickening and thixotropy property, and helps improve flowability of powders. Ideal for use in adhesives a...view more Hydrophobic Fumed Silica R1202 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, excellent thickening and thixotropy property, and helps improve flowability of powders. Ideal for use in adhesives and sealants, epoxy resin, vinyl resin and gel coat, and able glue, Coating, and Copier toner. view less | |
| Hydrophobic Fumed Silica R1208 | Ningxia Futael Silicon Industry Co.,LTD | Hydrophobic Fumed Silica R1208 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, xcellent thickening and thixotropy property, and improves flowability of powders. Ideal for use in adhesives and sea...view more Hydrophobic Fumed Silica R1208 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, xcellent thickening and thixotropy property, and improves flowability of powders. Ideal for use in adhesives and sealants, epoxy resin, vinyl resin and gel coat, able glue, Coating, and Copier toner. view less | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...view more Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...view more Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| RUETAFLEX 1000 | Rain Carbon Germany GmbH | RUETAFLEX 1000 is a diisopropyl naphthalene. | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...view more SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. view less | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...view more SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. view less | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...view more SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. view less | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...view more SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. view less | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...view more SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. view less | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...view more SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. view less |
