UL Prospector
Prospector

Success!

Successfully saved your search
41 Results
Atrepur 288/60 D4 Atcoat GmbH Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...view more Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 288/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 4000 to 6000 mPas. view less
Atrepur 340/54 D4 Atcoat GmbH Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...view more Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 340/54 D4 has an oil length of 60, a solid of 54%, and a viscosity of 8000 to 12000 mPas. view less
Atrepur 939/60 K6 Atcoat GmbH Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natura...view more Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 939/60 K6 has an oil length of 60, a solid of 60%, and a viscosity of 5.5 to 7.5 Pas. view less
Atrepur HS 500/70 D4 Atcoat GmbH Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 500/70 D4 has an oil length of 57, a solid of 70%, and a viscosity of 9000 to 12000 mPas. view less
Atrepur HS 550/70 D4 Atcoat GmbH Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 550/70 D4 has an oil length of 58, a solid of 70%, and a viscosity of 13000 to 17000 mPas. view less
Atrepur HS 600/70 IPL Atcoat GmbH Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and...view more Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 600/70 IPL has an oil length of 63, a solid of 70%, and a viscosity of 5000 to 9000 mPas. view less
Atrepur HS 700/70 D4 Atcoat GmbH Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 700/70 D4 has an oil length of 60, a solid of 70%, and a viscosity of 9000 to 13000 mPas. view less
Atrepur HS 800/80 D4 Atcoat GmbH Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 800/80 D4 has an oil length of 60, a solid of 80%, and a viscosity of 4000 to 8000 mPas. view less
Atrepur U1350/60 D4 Atcoat GmbH Atrepur U1350/60 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for fast drying top coatings and primers with high abrasion resistance, good chemical and water resistance. Atcoat alkyd resins are based on natura...view more Atrepur U1350/60 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for fast drying top coatings and primers with high abrasion resistance, good chemical and water resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U1350/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 40 to 60 dPas. view less
Atrepur U41/65 BA Atcoat GmbH Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resin...view more Atrepur U41/65 BA is a medium oil urethane modified alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for the production of forced drying and air drying primers and lacquers with good flexibility and adhesion. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U41/65 BA has an oil length of 41, a solid of 65%, and a viscosity of 17 to 33 dPas. view less
Atrepur U600/60 D4 Atcoat GmbH Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd re...view more Atrepur U600/60 D4 is a urethane alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 26 to 35 dPas. view less
Atrepur U600/60 K3 Atcoat GmbH Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins ...view more Atrepur U600/60 K3 is a urethane alkyd resin, consisting of high quality fatty acid and white spirit, suitable for the production of corrosion resistant systems and fast drying lacquers with good weather resistance and gloss fastness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/60 K3 has an oil length of 60, a solid of 60%, and a viscosity of 25 to 35 dPas. view less
Atrepur U600/HS70 IP J Atcoat GmbH Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, pl...view more Atrepur U600/HS70 IP J is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, suitable for the production of corrosion resistant systems and fast drying lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600/HS70 IP J has an oil length of 60, a solid of 70%, and a viscosity of 45 to 65 dPas. view less
Atrepur U600HS/75 D4 Atcoat GmbH Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on nat...view more Atrepur U600HS/75 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, suitable for the production of corrosion resistant systems, fast drying lacquers, and VOC complaint with good hardness. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur U600HS/75 D4 has an oil length of 60, a solid of 75%, and a viscosity of 45 to 65 dPas. view less
Hauthane HD-2113 Hauthaway Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without t...view more Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for 180 degree reverse bend. HD-2113 may be used as supplied or blended with acrylic emulsions for application by spray, rotogravure, reverse roll, flexible blade, or wire wound rod. view less
Hauthane HD-2117 Hauthaway Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concret...view more Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2117 produces films with exceptional adhesion to aluminum, excellent leveling properties and high levels of chemical resistance. HD-2117 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less
Hauthane HD-2142 Hauthaway Hauthane HD-2142 is an aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant fi...view more Hauthane HD-2142 is an aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. HD-2142 may be used as a sole vehicle or blended with acrylic emulsions. Viscosity modification can be made with associative thickeners for application via spray, knife-over-roll, or other methods. view less
Hauthane HD-2334 Hauthaway Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 w...view more Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334 also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. view less
Hauthane HD-2504 Hauthaway Hauthane HD-2504 is a very hard, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. HD-2504 is ideally suited ...view more Hauthane HD-2504 is a very hard, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. HD-2504 is ideally suited for exterior applications where film durability and longevity are important considerations. HD-2504 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application viscosity. view less
Hauthane HD-2602 Hauthaway Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silic...view more Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. HD-2602 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less
Hauthane HD-3011 Hauthaway Hauthane HD-3011 is a low cost, aromatic, polyether-based, aqueous polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prev...view more Hauthane HD-3011 is a low cost, aromatic, polyether-based, aqueous polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. HD-3011 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It can be thickened with associative thickeners for alternative application methods. view less
Hauthane HD-4664 Hauthaway Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart grea...view more Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart greater film flexibility. A balanced composition provides good stability with acrylic latices and confers superior strength, abrasion resistance and low temperature flexibility properties. HD-4664 can be used as a sole vehicle or blended with acrylic emulsions for spray or pad bath applications. Solids can be reduced with water to optimize dry coating weight. This product may also be thickened with associative thickeners for knife-over-roll or similar methods. view less
Hauthane HD-4675 Hauthaway Hauthane HD-4675 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4675 can be used as supplied or blended wi...view more Hauthane HD-4675 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-4675 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. view less
Hauthane HD-6000 Hauthaway Hauthane HD-6000 is a polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The pr...view more Hauthane HD-6000 is a polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstrop’s Easaqua X D 401 / M 501. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. HD-6000 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. view less
Hauthane L-2020 Hauthaway Hauthane L-2020 is a low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point propert...view more Hauthane L-2020 is a low cost, co-solvent free, aromatic, polyether-based, polyurethane dispersion. It is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance. L-2020 may be spray or pad bathed as supplied. It may be thickened for knife- over-roll or similar methods. view less
Hauthane L-2357 Hauthaway Hauthane L-2357 is a branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. It was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but t...view more Hauthane L-2357 is a branched, aliphatic, co-solvent free, polyether-based, polyurethane dispersion. It was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but the use of a multiple component system is neither feasible nor desirable. L-2357 can be used as supplied or blended with acrylic emulsions for spray or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. view less
Hauthane L-2896 Hauthaway Hauthane L-2896 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradatio...view more Hauthane L-2896 is a polycarbonate-based, aliphatic, water-borne polyurethane dispersion. It was developed for general coatings use on wood, plastic and metal substrates. The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation. L-2896 is ideally suited for exterior applications where film durability and longevity are important considerations. L-2896 may be formulated into coatings applied by spray, brush or pad applicator. It can be used as a sole vehicle or blended with acrylic emulsions. The rheology may be modified with associative thickeners. view less
Hauthane L-3101 Hauthaway Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 ...view more Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 is ideally suited for exterior applications where film durability and longevity are important considerations. L-3101 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application rheology. view less
Relca® UV-628 Stahl Polymers Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good...view more Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good scratch resistance properties, and is tack free before UV curing. This product is used in applications that need to be dried prior to EB/UV curing, and requires the addition of a photoinitiator to ensure proper curing. view less
Sintopol DP 166/42%E.A. Sintochem s.r.l. Sintopol DP 166/42%E.A. is a clear yellow-brown color semi-aliphatic polyurethane resin that is not reactive and has film forming TDI and Tin free and with a high molecular weight. Sintopol DP 166/42%E.A. has been designed to formulate rotogravure and fle...view more Sintopol DP 166/42%E.A. is a clear yellow-brown color semi-aliphatic polyurethane resin that is not reactive and has film forming TDI and Tin free and with a high molecular weight. Sintopol DP 166/42%E.A. has been designed to formulate rotogravure and flexographic inks on various flexible films such as OPP, PET, OPA. This product provides adhesion to metalized films, paper and aluminum. Sintopol DP 166/42%E.A. is primarily used in inks, paints and coatings to provide resistance UV rays. view less
Sintopol DP 180/30% E.A. Sintochem s.r.l. Sintopol DP 180/30% E.A. is a clear yellow-brown color an aliphatic polyurethane resin with high molecular weight. Sintopol DP 180/30% E.A. is intended for flexographic and gravure printing inks and can be used on several different flexible films as OPP, ...view more Sintopol DP 180/30% E.A. is a clear yellow-brown color an aliphatic polyurethane resin with high molecular weight. Sintopol DP 180/30% E.A. is intended for flexographic and gravure printing inks and can be used on several different flexible films as OPP, PET, OPA. This product has lamination properties, and has non-yellowing resistance from UV rays and resistance to saponification. Sintopol DP 180/30% E.A. is primarily used in inks, paints and coatings. view less
Sintopol DP 266/42%E.A. Sintochem s.r.l. Sintopol DP 266/42%E.A. is a clear yellow-brown color semi-aliphatic polyurethane resin that is not reactive and has film forming TDI and Tin free and with a high molecular weight. Sintopol DP 266/42%E.A. has been designed to formulate rotogravure and fle...view more Sintopol DP 266/42%E.A. is a clear yellow-brown color semi-aliphatic polyurethane resin that is not reactive and has film forming TDI and Tin free and with a high molecular weight. Sintopol DP 266/42%E.A. has been designed to formulate rotogravure and flexographic inks on various flexible films such as OPP, PET, OPA. This product provides adhesion to metalized films, paper and aluminum. Sintopol DP 266/42%E.A. is primarily used in inks, paints and coatings to provide resistance UV rays. view less
Sintopol DP 90/100% Sintochem s.r.l. Sintopol DP 90/100% is a gardner colored thermoplastic urethane resin, it is not reactive but does have good plastifying properties. This product serves as a modifier in nitro-based inks for flexible packaging and adheres to plastic films. Sintopol DP 90/...view more Sintopol DP 90/100% is a gardner colored thermoplastic urethane resin, it is not reactive but does have good plastifying properties. This product serves as a modifier in nitro-based inks for flexible packaging and adheres to plastic films. Sintopol DP 90/100% is primarily used as a heat resistant to low temperatures in inks, paints and coatings. view less
Sintopol DP 90/73 % E.A. Sintochem s.r.l. Sintopol DP 90/73 % E.A. is a gardner colored thermoplastic urethane resin, it is not reactive but does have good plastifying properties. This product serves as a modifier in nitro-based inks for flexible packaging and adheres to plastic films. Sintopol D...view more Sintopol DP 90/73 % E.A. is a gardner colored thermoplastic urethane resin, it is not reactive but does have good plastifying properties. This product serves as a modifier in nitro-based inks for flexible packaging and adheres to plastic films. Sintopol DP 90/73 % E.A. is primarily used as a heat resistant to low temperatures in inks, paints and coatings. view less
Sintopol DP 90/80 % E.A. Sintochem s.r.l. Sintopol DP 90/80 % E.A. is a gardner colored thermoplastic urethane resin, it is not reactive but does have good plastifying properties. This product serves as a modifier in nitro-based inks for flexible packaging and adheres to plastic films. Sintopol D...view more Sintopol DP 90/80 % E.A. is a gardner colored thermoplastic urethane resin, it is not reactive but does have good plastifying properties. This product serves as a modifier in nitro-based inks for flexible packaging and adheres to plastic films. Sintopol DP 90/80 % E.A. is primarily used as a heat resistant to low temperatures in inks, paints and coatings. view less
Sintopol MD 110/65% E.A. Sintochem s.r.l. Sintopol MD 110/65% E.A. is a gardner 2 max color 65% solution in ethyl acetate of a polyurethane resin, not reactive, with adhesion on different bases and with more heat resistance than Sintopol MD 100. Sintopol MD 110/65% E.A. is designed to be formulat...view more Sintopol MD 110/65% E.A. is a gardner 2 max color 65% solution in ethyl acetate of a polyurethane resin, not reactive, with adhesion on different bases and with more heat resistance than Sintopol MD 100. Sintopol MD 110/65% E.A. is designed to be formulated with gravure and flexographic inks, in addition with cellulose and vinyl film formers. This product formulation provides adhesion, a gloss finish and resistance to heat sealing. Sintopol MD 110/65% E.A. is primarily used in inks, paints and coatings. view less
Sintopol MD 110/75% E.A. Sintochem s.r.l. Sintopol MD 110/75% E.A. is a 75% solution in ethyl acetate of a polyurethane resin, not reactive, with good adhesion on different bases and with more heat resistance than Sintopol MD 100. Sintopol MD 110/75% E.A. is designed to be formulated with gravure...view more Sintopol MD 110/75% E.A. is a 75% solution in ethyl acetate of a polyurethane resin, not reactive, with good adhesion on different bases and with more heat resistance than Sintopol MD 100. Sintopol MD 110/75% E.A. is designed to be formulated with gravure and flexographic inks, in addition with cellulose and vinyl film formers. This product formulation provides adhesion, a gloss finish and resistance to heat sealing. Sintopol MD 100/75% E.A. is primarily used in inks, paints and coatings. view less
Sintopol MD 120/60% E.A. Sintochem s.r.l. Sintopol MD 120/60% E.A. is a clear yellow-brown color polyurethane resin that is not reactive that is designed to formulate gravure and flexographic inks with adhesive properties on several different packaging substrates. This product can be combined wit...view more Sintopol MD 120/60% E.A. is a clear yellow-brown color polyurethane resin that is not reactive that is designed to formulate gravure and flexographic inks with adhesive properties on several different packaging substrates. This product can be combined with nitrocellulose film formers in formulating gravure and flexographic inks with good adhesive properties on various films. Sintopol MD 120/60% E.A. is primarily used in inks, paints and coatings and provides resistance to scratches and with a superior heat seal resistance. view less
Sintopol MD 95/75% E.A. Sintochem s.r.l. Sintopol MD 95/75% E.A. is a 75% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic i...view more Sintopol MD 95/75% E.A. is a 75% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 95/75% E.A. is primarily used in inks, paints and coatings. view less
Sintopol SP 75 LV/80% E.A. Sintochem s.r.l. Sintopol SP 75 LV/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75 LV/80% E.A. produces gravure an...view more Sintopol SP 75 LV/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75 LV/80% E.A. produces gravure and flexographic inks with good flexibility, gloss and adhesion to treated polyethylene and polypropylene. This product is primarily used as a solvent in paints and coatings to help resistance to weathering. view less
Sintopol SP 75/80% E.A. Sintochem s.r.l. Sintopol SP 75/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75/80% E.A. produces gravure and flex...view more Sintopol SP 75/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75/80% E.A. produces gravure and flexographic inks with good flexibility, gloss and adhesion to treated polyethylene and polypropylene. This product is primarily used as a solvent in paints and coatings to help resistance to weathering. view less