Disvimol-101 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss i...view more Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss inks. view less | |
Disvimol-101(M) | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101(M) is a rosin derivative that has been modified with maleic acid. This product has high gloss and is oil soluble. It can be used in synthetic enamels. | |
Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
Disvimol-104 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-104 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, paper coating, ballpoint pen inks, and liquid inks. | |
Disvimol-106 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-106 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, ballpoint pen inks, and liquid inks. | |
Dromal™ 2351 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2351 is Rosin modified Maleic Resin. | |
Dromal™ 2354 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2354 is Rosin modified Maleic Resin. | |
RC125 | Tianyi Chemical Engineering Material Co., Ltd. | RC125, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tar...view more RC125, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. view less | |
RC125B | Tianyi Chemical Engineering Material Co., Ltd. | RC125B, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal ta...view more RC125B, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. view less | |
RC130 | Tianyi Chemical Engineering Material Co., Ltd. | RC130, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tar...view more RC130, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. view less | |
RC130A | Tianyi Chemical Engineering Material Co., Ltd. | RC130A, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal ta...view more RC130A, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. view less | |
RC130B | Tianyi Chemical Engineering Material Co., Ltd. | RC130B, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal ta...view more RC130B, in the form of a translucent yellow crystalline flake, is a compound adduct of gum rosin and maleic acid anhydride that has been esterified by glycerol or pentaerythritol that can be used in paints and coatings. This product is soluble in coal tars, esters and turpentine oil, and is insoluble in alcoholic solvents. It is resistant to yellowing and heat. view less | |
RGM128 | Guangxi Zhongchang Resin Co., Ltd. | RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...view more RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. view less | |
RGM128W | Guangxi Zhongchang Resin Co., Ltd. | RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...view more RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. view less | |
RGM135 | Guangxi Zhongchang Resin Co., Ltd. | RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...view more RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. view less | |
RGM135W | Guangxi Zhongchang Resin Co., Ltd. | RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...view more RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. view less | |
Tertac TT 140 | Respol Resinas | Tertac TT 140 is a maleic resin that can be used in coatings and oleoresinous varnishes. This product is soluble in drying oils and confers hardness, colour stability, and fast drying to the end product. Its softening point ranges between 135-145 degree...view more Tertac TT 140 is a maleic resin that can be used in coatings and oleoresinous varnishes. This product is soluble in drying oils and confers hardness, colour stability, and fast drying to the end product. Its softening point ranges between 135-145 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
Tertac TT N320 | Respol Resinas | Tertac TT N320 is a maleic resin that can be used in nitrocellulose varnishes and oleoresinous varnishes. This product improves gloss, colour retention, and adhesion in the end product. Its softening point ranges between 115-125 degrees Celsius and its ...view more Tertac TT N320 is a maleic resin that can be used in nitrocellulose varnishes and oleoresinous varnishes. This product improves gloss, colour retention, and adhesion in the end product. Its softening point ranges between 115-125 degrees Celsius and its acid value is less than 30 mg of potassium hydroxide per gram. view less | |
Tertac TT N340 | Respol Resinas | Tertac TT N340 is a maleic resin that can be used in nitrocellulose varnishes. This product improves gloss, colour retention, adhesion and hardness sanding properties in the end product. Its softening point ranges between 130-140 degrees Celsius and its...view more Tertac TT N340 is a maleic resin that can be used in nitrocellulose varnishes. This product improves gloss, colour retention, adhesion and hardness sanding properties in the end product. Its softening point ranges between 130-140 degrees Celsius and its acid value is less than 35 mg of potassium hydroxide per gram. view less | |
WorléeSin GM 201 | Worlée-Chemie G.m.b.H. | WorléeSin GM 201 is a pale maleic resin with good light fastness. It is used as a universal resin in oil and alkyd synthetic paints, NC-lacquers and inks. W´Sin GM 201 is compatible with non drying and drying short, medium and long oil alkyds. It is also ...view more WorléeSin GM 201 is a pale maleic resin with good light fastness. It is used as a universal resin in oil and alkyd synthetic paints, NC-lacquers and inks. W´Sin GM 201 is compatible with non drying and drying short, medium and long oil alkyds. It is also compatible with nitrocellulose and amino resins. W´Sin GM 201 is soluble in aliphatic hydrocarbons, esters, ketones, higher alcohols and glycol ether esters. W´Sin GM 201 improves through-drying, gloss, hardness and film build of alkyd enamels and it adds gloss and structure to hammer finishes. view less | |
WorléeSin GM 203 | Worlée-Chemie G.m.b.H. | WorléeSin GM 203 is a very pale and hard maleic resin with fast drying and through hardening characteristics for use in nitrocellulose, oil, and alkyd paints. W´Sin GM 203 is compatible with non drying and drying short, medium and long oil alkyds. It is a...view more WorléeSin GM 203 is a very pale and hard maleic resin with fast drying and through hardening characteristics for use in nitrocellulose, oil, and alkyd paints. W´Sin GM 203 is compatible with non drying and drying short, medium and long oil alkyds. It is also compatible with nitrocellulose and amino resins. Although the paint films are clear when W´Sin GM 203 is combined with drying oils, cooking is recommended to improve weather resistance. view less | |
WorléeSin MK 223 | Worlée-Chemie G.m.b.H. | WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds an...view more WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds and urea formaldehyde resins. Even small quantities of W´Sin MK 223 in these lacquers improve hardness, scratch resistance and film build. view less | |
WorléeSin MS 235 | Worlée-Chemie G.m.b.H. | WorléeSin MS 235 is an alcohol soluble maleic resin that is water thinnable after neutralisation. It is suitable for the production of flexographic and gravure inks for paper, aluminium and plastic films. Due to its compatibility with nitro- and ethyl cel...view more WorléeSin MS 235 is an alcohol soluble maleic resin that is water thinnable after neutralisation. It is suitable for the production of flexographic and gravure inks for paper, aluminium and plastic films. Due to its compatibility with nitro- and ethyl cellulose and with softeners, inks and varnishes based on W´Sin MS 235 exhibit a high gloss level and excellent transparency. Good pigment grinding is also observed. view less | |
WorléeSin MS 265 | Worlée-Chemie G.m.b.H. | WorléeSin MS 265 is a hard, spirit soluble maleic resin which becomes water thinnable after neutralization. It is used to formulate water thinnable flexo printing inks with very fast drying and increased abrasion resistance. This product is applied in fle...view more WorléeSin MS 265 is a hard, spirit soluble maleic resin which becomes water thinnable after neutralization. It is used to formulate water thinnable flexo printing inks with very fast drying and increased abrasion resistance. This product is applied in flexo and gravure inks and overprint lacquers. view less | |
WorléeSin PM 200 | Worlée-Chemie G.m.b.H. | WorléeSin PM 200 is a low viscous pentaerythritol resin for decorative and industrial paints as well as high concentrated pigment pastes. W´Sin PM 200 is compatible with non drying and with drying short, medium and long oil alkyds. W´Sin PM 200 is added t...view more WorléeSin PM 200 is a low viscous pentaerythritol resin for decorative and industrial paints as well as high concentrated pigment pastes. W´Sin PM 200 is compatible with non drying and with drying short, medium and long oil alkyds. W´Sin PM 200 is added to air drying decorative, house, DIY paints and to industrial coatings for improving hardness, gloss and solids content. Due to its low viscosity, good pigment wetting and very good compatibility, W´Sin PM 200 is also used for production of high concentrated solvent-based pigment pastes. view less | |
WorléeSin PM 202 | Worlée-Chemie G.m.b.H. | WorléeSin PM 202 is a pentaerythritol maleic resin with fast solvent release and good color retention for the manufacture of oil and alkyd paints. W´Sin PM 202 is compatible with short, medium and long oil alkyds. This product is added to air drying indus...view more WorléeSin PM 202 is a pentaerythritol maleic resin with fast solvent release and good color retention for the manufacture of oil and alkyd paints. W´Sin PM 202 is compatible with short, medium and long oil alkyds. This product is added to air drying industrial paints to improve hardness, gloss and gloss retention. view less |