| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. view less | |
| Flytac 197-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made especially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-105 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac 197-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceed...view more Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product also has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...view more Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. view less | |
| Glycerol Ester of Gum Rosin | Qingdao Sun Chemical Corporation Limited | Glycerol Ester of Gum Roson is an organic compound made by high-quality pinus massoniana rosin and glycerol. It’s a natural tackily resin which has excellent performance and, after the intensive processing (esterification, decolorization,stabilization tre...view more Glycerol Ester of Gum Roson is an organic compound made by high-quality pinus massoniana rosin and glycerol. It’s a natural tackily resin which has excellent performance and, after the intensive processing (esterification, decolorization,stabilization treatment,etc.), has merits such as light color and low odor. It is ideal for paint, hot melt, as well as pressure sensitive adhesives and coatings. This product has a softening point of 85 ± 2°C, an acid value of 7mg KOH/g, and an ash content of < 0.01%. view less | |
| GLYCEROL ESTER OF GUM ROSIN 85 (PM-003) | PT. NASCO | GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture variou...view more GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color. view less | |
| Gum Rosin | LUKEM D.O.O. | Gum Rosin is a light yellow, transparent solid with a softening point of 76ºC. This product is used as a raw material in coatings and synthetic resins. | |
| GUM ROSIN INDONESIAN (PM-002) | PT. NASCO | GUM ROSIN INDONESIAN is made up of various resin acids such as Abietic, Palustric, Isopimaric, Mercusic Acids. | |
| Gum Rosin WG | SWISLOYD LIMITED | Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents...view more Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin WW | SWISLOYD LIMITED | Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic so...view more Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin [WW/WG Grade] | Industrial Oleochemical Products | Gum Rosin [WW/WG Grade] is a standard grade gum rosin in a nugget-sized particle form. This product is most commonly used in hot-melt and pressure-sensitive adhesive applications. | |
| Gum Rosin X | SWISLOYD LIMITED | Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many ...view more Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...view more Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. view less | |
| HR100 | Tianyi Chemical Engineering Material Co., Ltd. | HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR100A | Tianyi Chemical Engineering Material Co., Ltd. | HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...view more HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR100B | Tianyi Chemical Engineering Material Co., Ltd. | HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...view more HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR105 | Tianyi Chemical Engineering Material Co., Ltd. | HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR110 | Tianyi Chemical Engineering Material Co., Ltd. | HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging view less | |
| HR95 | Tianyi Chemical Engineering Material Co., Ltd. | HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing ...view more HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 (PM-004) | PT. NASCO | MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity i...view more MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations. It exhibits good hardness, high gloss and vest fest drying speed. view less | |
| ML100 | Guangxi Zhongchang Resin Co., Ltd. | ML100 is a light yellow flaky solid and a specialty road making resin derived from natural gum rosin. This product has characteristics such as light color, high softening point , ultraviolet absorption, free radical capture, peroxide decompose and active ...view more ML100 is a light yellow flaky solid and a specialty road making resin derived from natural gum rosin. This product has characteristics such as light color, high softening point , ultraviolet absorption, free radical capture, peroxide decompose and active oxygen diminish. It does not pollute the air and contains strong wear and leveling that enables anti-yellowing and anti-aging advantages. view less | |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...view more PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. view less | |
| Polimelt P102 | Respol Resinas | Polimelt P102 is a tail oil rosin ester that can be used in road marking inks. This product has a softening point between 100-106 degrees Celsius and is designed for formulations with good resistance to thermal degradation and good oxidation stability. ...view more Polimelt P102 is a tail oil rosin ester that can be used in road marking inks. This product has a softening point between 100-106 degrees Celsius and is designed for formulations with good resistance to thermal degradation and good oxidation stability. Its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
| Polimelt P88 | Respol Resinas | Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg...view more Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg of potassium hydroxide per gram. view less | |
| Resin for Hot Melt Road Marking R-100 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-100 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Resin for Hot Melt Road Marking R-105 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-105 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Resin for Hot Melt Road Marking R-95 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-95 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Tergum T100 | Respol Resinas | Tergum T100 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better c...view more Tergum T100 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better colour and higher stability. Its softening point ranges between 92-98 degrees Celsius and its acid value is less than 20 mg of potassium hydroxide per gram. view less | |
| Tergum T103 | Respol Resinas | Tergum T103 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better c...view more Tergum T103 is a gum rosin that has been esterified with pentaerythritol that can be used in hot melt adhesives. This product has thermal stability and resistance to oxidative degradation in mixtures of elastomers and paraffins, and will provide better colour and higher stability. Its softening point ranges between 98-105 degrees Celsius and its acid value is less than 20 mg of potassium hydroxide per gram. view less | |
| Tergum T120 | Respol Resinas | Tergum T120 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability...view more Tergum T120 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability and resistance to oxidative degradation. Its softening point ranges between 114-120 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
| Tergum T122 | Respol Resinas | Tergum T122 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability...view more Tergum T122 is a gum rosin ester that can be used in hot melt adhesives and pressure-sensitive adhesives. This product is compatible with most elastomers, waxes, paraffin waxes and resins used in the adhesive industry. It provides high thermal stability and resistance to oxidative degradation. Its softening point ranges between 118-124 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
| Tergum T19 | Respol Resinas | Tergum T19 is a gum rosin that does not crystallize. This product can be used as a tackifier for natural or synthetic adhesives. Its softening point ranges between 85-95 degrees Celsius and its acid value ranges between 135-155 mg of potassium hydroxide...view more Tergum T19 is a gum rosin that does not crystallize. This product can be used as a tackifier for natural or synthetic adhesives. Its softening point ranges between 85-95 degrees Celsius and its acid value ranges between 135-155 mg of potassium hydroxide per gram. view less | |
| Tergum T385 | Respol Resinas | Tergum T385 is a gum rosin that has been esterified with glycerol. This product can be used in adhesive formulations that require increased tack. Its softening point ranges between 80-86 degrees Celsius and its acid value is less than 12 mg of potassium...view more Tergum T385 is a gum rosin that has been esterified with glycerol. This product can be used in adhesive formulations that require increased tack. Its softening point ranges between 80-86 degrees Celsius and its acid value is less than 12 mg of potassium hydroxide per gram. view less | |
| Tergum T39 | Respol Resinas | Tergum T39 is a liquid gum rosin ester that can be used as a viscosity regulator and a tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 20 degrees Celsius ranges between 300-500 and its acid value is...view more Tergum T39 is a liquid gum rosin ester that can be used as a viscosity regulator and a tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 20 degrees Celsius ranges between 300-500 and its acid value is less than 20 mg of potassium hydroxide per gram. view less | |
| Tergum T390 | Respol Resinas | Tergum T390 is a gum rosin that has been esterified with glycerol. This product can be used in hot-melt adhesive formulations. It increases tack while maintaining thermal stability and resistance to oxidative degradation. Its softening point ranges bet...view more Tergum T390 is a gum rosin that has been esterified with glycerol. This product can be used in hot-melt adhesive formulations. It increases tack while maintaining thermal stability and resistance to oxidative degradation. Its softening point ranges between 85-91 degrees Celsius and its acid value is less than 10 mg of potassium hydroxide per gram. view less | |
| Tergum T45 | Respol Resinas | Tergum T45 is a viscous liquid rosin ester that can be used as a tack promoter for acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 35 degrees Celsius ranges between 400-500 and its acid value is less than 15 mg of p...view more Tergum T45 is a viscous liquid rosin ester that can be used as a tack promoter for acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 35 degrees Celsius ranges between 400-500 and its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
| Tergum T459 | Respol Resinas | Tergum T459 is a gum rosin ester. This product is soluble in aliphatic solvents and allows for the production of higher-solid content adhesives. Its softening point ranges between 97-103 degrees Celsius and its acid value is less than 10 mg of potassium...view more Tergum T459 is a gum rosin ester. This product is soluble in aliphatic solvents and allows for the production of higher-solid content adhesives. Its softening point ranges between 97-103 degrees Celsius and its acid value is less than 10 mg of potassium hydroxide per gram. view less | |
| Tergum T47 | Respol Resinas | Tergum T47 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 50 degrees Celsius ranges between 230-280 degrees Celsius and i...view more Tergum T47 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter in acrylic dispersion adhesives or natural rubber-based adhesives. Its poise viscosity at 50 degrees Celsius ranges between 230-280 degrees Celsius and its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
| Tergum T49 | Respol Resinas | Tergum T49 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter for acrylic dispersion adhesives and natural rubber-based adhesives. This product's poise viscosity at 50 degrees Celsius ranges between 380-420 and its ...view more Tergum T49 is a pasty liquid rosin ester that can be used as a viscosity regulator and tack promoter for acrylic dispersion adhesives and natural rubber-based adhesives. This product's poise viscosity at 50 degrees Celsius ranges between 380-420 and its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
| TURPENTINE OIL INDONESIA (PM-001) | PT. NASCO | TURPENTINE OIL INDONESIA is a colorless to pale yellow, liquid of Pinus merkusii (Sumatran Pine). |
