| BYK®-4500 | BYK | BYK®-4500 is an adhesion promoter for aqueous emulsion paints and alkyd emulsions applied on aged coatings. It is a solution of a high molecular weight block copolymer. BYK-4500 improves adhesion, especially the wet-adhesion of aqueous systems on critical...view more BYK®-4500 is an adhesion promoter for aqueous emulsion paints and alkyd emulsions applied on aged coatings. It is a solution of a high molecular weight block copolymer. BYK-4500 improves adhesion, especially the wet-adhesion of aqueous systems on critical substrates, such as e.g. old alkyd resin coatings. This also applies to substrates that cannot be sanded previously because accessibility is difficult. The additive has no influence on drying behavior and storage stability of the aqueous system. The properties like e. g. hardness, flexibility, gloss or tendency to yellowing of the dry film are not influenced when using BYK-4500. BYK-4500 is easy to incorporate, and the additive is VOC-free. view less | |
| BYK®-4509 | BYK | BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups. | |
| BYK®-4510 | BYK | BYK®-4510 is an adhesion promoter for metal substrates. It is a solution of a copolymer with acidic groups. This product is applied in baking systems based on Acrylic/Melamine, Alkyd/Melamine and Polyester/Melamine. After neutralization (with e.g. DMEA) t...view more BYK®-4510 is an adhesion promoter for metal substrates. It is a solution of a copolymer with acidic groups. This product is applied in baking systems based on Acrylic/Melamine, Alkyd/Melamine and Polyester/Melamine. After neutralization (with e.g. DMEA) the additive can also be used in water-soluble systems. This adhesion promoter is also recommended for coil coatings applied on galvanized steel. view less | |
| BYK®-4511 | BYK | BYK®-4511 is a solution of a copolymer with functional groups. The additive can be used to increase the adhesion on various metal substrates (e.g. steel, galvanized steel, and aluminum) as well as on glass. Furthermore, the tolerance of the paint towards ...view more BYK®-4511 is a solution of a copolymer with functional groups. The additive can be used to increase the adhesion on various metal substrates (e.g. steel, galvanized steel, and aluminum) as well as on glass. Furthermore, the tolerance of the paint towards surface contaminations like oil or rust can be improved. view less | |
| BYK-4513 | BYK | BYK-4513 is an adhesion promoter for 2K aqueous epoxy systems to increase adhesion to metal substrates and corrosion resistance. It is used in aqueous epoxy-based coating systems as an adhesion promoter for metal substrates. It increases the wet and dry a...view more BYK-4513 is an adhesion promoter for 2K aqueous epoxy systems to increase adhesion to metal substrates and corrosion resistance. It is used in aqueous epoxy-based coating systems as an adhesion promoter for metal substrates. It increases the wet and dry adhesion and the mechanical resilience, and can also help to improve the corrosion resistance of the coating. The polymeric character of BYK-4513 and its attachment to the metal-coating interface also provide more flexibility to the film coating. BYK-4513 is silane free and has outstanding storage stability. view less | |
| Michem® Prime 4983RHSA | Michelman | Michem® Prime 4983RHSA is a high solids dispersion which provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oiland solvent resistance of coatings and adhesives. Michem® Prime 4983RHS can serve as a ti...view more Michem® Prime 4983RHSA is a high solids dispersion which provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oiland solvent resistance of coatings and adhesives. Michem® Prime 4983RHS can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating or a nonwoven binder. view less | |
| ProHere® U 10001 | Michelman | ProHere® U 10001 is a nonionic polyurethane emulsion that provides good adhesion to various metallic substrates, high mechanical flexibility and chemical resistance. Combining this with a wide formulation freedom and good optical aspects, it is a good sta...view more ProHere® U 10001 is a nonionic polyurethane emulsion that provides good adhesion to various metallic substrates, high mechanical flexibility and chemical resistance. Combining this with a wide formulation freedom and good optical aspects, it is a good starting point for your direct-to-metal formulations. view less | |
| Soluryl RX-10T | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-10T is a modified acrylic copolymer emulsion for water-based products that is compatible with a wide range of other acrylics. It has good adhesion, good film forming and wetting properties, and good waster resistance. | |
| Soluryl RX-20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let dow...view more Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. view less | |
| Soluryl RX-30 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as...view more Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. view less | |
| Soluryl SE-1301 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl SE-1301 is a modified acryl-styrene copolymer for water-based products. It is recommended for use as overprint varnishes for good adhesion property, overprint varnishes for film and paper, and as a let down vehicle for film as like PET, OPP and PE...view more Soluryl SE-1301 is a modified acryl-styrene copolymer for water-based products. It is recommended for use as overprint varnishes for good adhesion property, overprint varnishes for film and paper, and as a let down vehicle for film as like PET, OPP and PE. view less | |
| Soluryl SX-1420 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl SX-1420 is a crosslinked styrene-acryl emulsion for water-based products. It is recommended for improving agent for good adhesion, coating and Let down vehicle for good adhesion, and as a coating and Let down vehicle for film and metal. |
