| Vilkyd 188X75 | Vil Resins | Vilkyd 188X75 is an alkyd resin based off of linoleic-rich fatty acids that can be used in air-drying and stoving finishes. This product contains 36% fatty acids and 75% non-volatile compounds. | |
| Vilkyd 257AH55 | Vil Resins | Vilkyd 257AH55 is a polyurethane alkyd resin based off of linoleic-rich fatty acids that has been esterified with pentaerythritol. This product can be used in decorative paints and floor varnishes that exhibit high chemical and abrasion resistance and con...view more Vilkyd 257AH55 is a polyurethane alkyd resin based off of linoleic-rich fatty acids that has been esterified with pentaerythritol. This product can be used in decorative paints and floor varnishes that exhibit high chemical and abrasion resistance and contains 68% fatty acids and 55% non-volatile compounds. view less | |
| WorléeKyd AC 2550 | Worlée-Chemie G.m.b.H. | WorléeKyd AC 2550 is a short oil length very fast drying acrylated alkyd resin. W´Kyd AC 2550 is compatible with some short and medium oil length drying alkyds. W´Kyd AC 2550 is mainly recommended for very fast drying primers and top coats. | |
| WorléeKyd C 632 M | Worlée-Chemie G.m.b.H. | WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An additi...view more WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An addition of urea resin and acid catalyst is not necessary. view less | |
| WorléeKyd L 138 | Worlée-Chemie G.m.b.H. | WorléeKyd L 138 is a short oil phenolic modified alkyd resin suitable for the manufacture of air drying and stoving primers, under coats, surfacers, and fillers. This grade has a non-volatile content of 60% ± 1. W´Kyd L 138 is compatible with most short o...view more WorléeKyd L 138 is a short oil phenolic modified alkyd resin suitable for the manufacture of air drying and stoving primers, under coats, surfacers, and fillers. This grade has a non-volatile content of 60% ± 1. W´Kyd L 138 is compatible with most short oil alkyds and with some medium oil length alkyds and nitro cellulose. To reduce the viscosity and improve viscosity stability in heavily filled systems, a small addition of an alcohol, e.g. butanol is recommended. view less | |
| WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) | Worlée-Chemie G.m.b.H. | WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short ...view more WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length alkyd resins. It is also compatible with some physical drying binders like vinyl mix polymerisates (e.g. Laroflex from BASF) and chlorinated rubber (e.g. Pergut from Bayer). view less | |
| WorléeKyd MH 439 (60% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeKyd MH 439 (60% In Xylene) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length ...view more WorléeKyd MH 439 (60% In Xylene) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length alkyd resins. It is also compatible with some physical drying binders like vinyl mix polymerisates (e.g. Laroflex from BASF) and chlorinated rubber (e.g. Pergut from Bayer). W´Kyd MH 439 can also be used for fast drying and high resistant industrial enamels. view less | |
| WorléeSol 64 E | Worlée-Chemie G.m.b.H. | WorléeSol 64 E is a short oil, air drying alkyd resin used for the manufacture of water thinnable air and forced drying primers and top coats. It is modified with special fatty acids and water thinnable after neutralization with ammonia or amines. Primers...view more WorléeSol 64 E is a short oil, air drying alkyd resin used for the manufacture of water thinnable air and forced drying primers and top coats. It is modified with special fatty acids and water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 64 E show very fast drying and good anti corrosion properties. The application of W´Sol 64 E systems is similar to the conventional systems, e.g. spraying, dipping, flow coating etc. view less | |
| WorléeSol 65 A | Worlée-Chemie G.m.b.H. | WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinna...view more WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 65 A have a very good corrosion resistance. view less | |
| WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) is a urethane modified long oil alkyd with a soft gel structure. The thixotropy is temperature and polar solvents stable. It is used for the manufacture of thick layer coatings and lacquers. This gr...view more WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) is a urethane modified long oil alkyd with a soft gel structure. The thixotropy is temperature and polar solvents stable. It is used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 40% ± 1.5. Paints and lacquers based on W´Thix V 800 have very good brushability, excellent flow and also at thick layers very good through drying. view less | |
| WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) is a urethane modified long oil alkyd with a soft gel structure. It used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 50% ± 2. W´Thix V 800 is comp...view more WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) is a urethane modified long oil alkyd with a soft gel structure. It used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 50% ± 2. W´Thix V 800 is compatible with most medium and long oil drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. Paints and lacquers based on W´Thix V 800 have very good brushability, excellent flow and also at thick layers very good through drying. Due to the very good through drying, early stackability is achieved. Natural and artificial cold check tests have indicated long term elasticity. view less |
