| Makrovil PVA 0530 | Indulor Chemie GmbH | Makrovil PVA 0530 is an aqueous solution of a low molecular polyvinyl alcohol. It is a cobinder and binder. This product has excellent flow behavior, turbid film, and a very good transfer property. Makrovil PVA 0530 is used in adhesives, architectural coa...view more Makrovil PVA 0530 is an aqueous solution of a low molecular polyvinyl alcohol. It is a cobinder and binder. This product has excellent flow behavior, turbid film, and a very good transfer property. Makrovil PVA 0530 is used in adhesives, architectural coatings, wood finishing applications, and artist's colors. view less | |
| Makrovil PVA 1025 | Indulor Chemie GmbH | Makrovil PVA 1025 is an aqueous solution of a low molecular polyvinyl alcohol. It is a cobinder and binder. This product has excellent flow behavior, turbid film, very good transfer properties, excellent pigment binding power, and very good solvent resist...view more Makrovil PVA 1025 is an aqueous solution of a low molecular polyvinyl alcohol. It is a cobinder and binder. This product has excellent flow behavior, turbid film, very good transfer properties, excellent pigment binding power, and very good solvent resistance. Makrovil PVA 1025 is used in adhesives, architectural coatings, wood finishing applications, and artist's colors. view less | |
| Makrovil PVA 2310 | Indulor Chemie GmbH | Makrovil PVA 2310 is an aqueous solution of a medium molecular polyvinyl alcohol. It is a cobinder. This product has excellent flow behavior, transparent film, very good transfer properties, excellent pigment binding power, and very high solvent resistanc...view more Makrovil PVA 2310 is an aqueous solution of a medium molecular polyvinyl alcohol. It is a cobinder. This product has excellent flow behavior, transparent film, very good transfer properties, excellent pigment binding power, and very high solvent resistance. Makrovil PVA 2310 is used in adhesives, architectural coatings, paper finishing, and wood finishing applications. view less | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...view more MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. view less | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...view more MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. view less | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...view more MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. view less | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...view more MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. view less | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...view more MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. view less | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...view more MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. view less | |
| Nippolan 2304 | Tosoh Corporation | Nippolan 2304 is a two-component polyurethane adhesive in a methyl ethyl ketone solvent. This product is ideal for use in ink vehicle applications. | |
| Nippolan 3004 | Tosoh Corporation | Nippolan 3004 is a polyurethane adhesive and tacking agent in an ethyl acetate solvent. This product is that is ideal for use in film lamination applications. | |
| Nippolan 3016 | Tosoh Corporation | Nippolan 3016 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in industrial material applications. | |
| Nippolan 3110 | Tosoh Corporation | Nippolan 3110 is a one-component polyurethane adhesive in toluene, acetone, and methyl ethyl ketone solvents. This product is ideal for use in plastic film (PVC, PET, PP, etc.) applications. | |
| Nippolan 3114 | Tosoh Corporation | Nippolan 3114 is a two-component polyurethane adhesive in methyl ethyl ketone and toluene solvents. This product is ideal for use in plastic film (PVC, PET, PP, etc.) applications. | |
| Nippolan 3116 | Tosoh Corporation | Nippolan 3116 is a one-component polyurethane adhesive in methyl ethyl ketone, toluene, acetone, and dimethylformamide solvents. This product is ideal for use in leather applications, including shoes. | |
| Nippolan 3124 | Tosoh Corporation | Nippolan 3124 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in dry lamination applications. | |
| Nippolan 3126 | Tosoh Corporation | Nippolan 3126 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in dry lamination applications. | |
| Nippolan 3219 | Tosoh Corporation | Nippolan 3219 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in dry lamination applications. | |
| Nippolan 3230 | Tosoh Corporation | Nippolan 3230 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in dry lamination applications. | |
| nolax A21.2007 | nolax AG (Vanora) | nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 h...view more nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2007-S | nolax AG (Vanora) | nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007...view more nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007-S has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 | nolax AG (Vanora) | nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a meltin...view more nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 S | nolax AG (Vanora) | nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a me...view more nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 | nolax AG (Vanora) | nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a meltin...view more nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 S | nolax AG (Vanora) | nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a me...view more nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2026 | nolax AG (Vanora) | nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A2...view more nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2026 has a melting point of 60 to 75°C, relative density of 1.0 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 | nolax AG (Vanora) | nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.22...view more nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294 has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 S | nolax AG (Vanora) | nolax A21.2294-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21....view more nolax A21.2294-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294-S has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A22.2235 | nolax AG (Vanora) | nolax A22.2235 is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bondin...view more nolax A22.2235 is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2235 has a melting point of 120 to 145°C, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A22.2235 S | nolax AG (Vanora) | nolax A22.2235-S is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bond...view more nolax A22.2235-S is a sheet of slightly opaque colored thermoplastic adhesive multilayer film built on modified polypropylene and copolyamides that are suitable for bonding textiles. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2235-S has a melting point of 120 to 145°C, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax M11.185 | nolax AG (Vanora) | nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin c...view more nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. view less | |
| nolax M11.230 | nolax AG (Vanora) | nolax M11.230 is a solid, cloudy and somewhat yellowish in color, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are ...view more nolax M11.230 is a solid, cloudy and somewhat yellowish in color, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. nolax M11.230 has a flash point greater than 250 °C, a viscosity of 12700 mPa•s at 160°C, and a melting point of ~108 °C. view less | |
| nolax M11.342 | nolax AG (Vanora) | nolax M11.342 is a solid yellow colored, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. T...view more nolax M11.342 is a solid yellow colored, non-skin irritating, pressure sensitive hot melt adhesive. It can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. nolax M11.342 has a flash point greater than 250 °C, a viscosity of 13500 mPa•s at 160°C, and a softening point of 100 °C. view less | |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...view more nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. view less | |
| nolax S21.2018 PE40 | nolax AG (Vanora) | nolax S21.2018 PE40 is a sheet of slightly opaque colored thermoplastic adhesive film based on polyurethanes and can be processed with all established lamination, calendaring, and bonding techniques, except for high frequency welding. S21.2018 PE40 has a ...view more nolax S21.2018 PE40 is a sheet of slightly opaque colored thermoplastic adhesive film based on polyurethanes and can be processed with all established lamination, calendaring, and bonding techniques, except for high frequency welding. S21.2018 PE40 has a melting point of 65 to 85°C, relative density of 1.16 g/cm³, is insoluble in water, and is not readily biodegradable. view less | |
| nolax S22.2202 | nolax AG (Vanora) | nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well...view more nolax S22.2202 is soft, slightly rubber elastic, thermoplastic polyurethane adhesive multilayer film with decent transparency, that provides worthy attachment between incompatible, dissimilar substrates in light weight structures (sandwich boards) as well as technical textiles. Adheres on one side to metals and polyolefinic substrates (PE, EVA, EPDM), and on the other side to painted sheet material, glass, PC, PVC, PU, ABS, PA, and more. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A22.2202 has a melting point of 100 to 130°C, relative density of ~1.0 g/cm³, is insoluble in water, and not readily biodegradable. view less | |
| nolax S22.2272 | nolax AG (Vanora) | nolax S22.2272 is a sheet of black colored thermoplastic adhesive film based on modified polyolefines that is used for the lamination of ballistic fabrics. It has a melting point of 120 to 130°C, relative density of 0.93 g/cm³, and not readily biodegradab...view more nolax S22.2272 is a sheet of black colored thermoplastic adhesive film based on modified polyolefines that is used for the lamination of ballistic fabrics. It has a melting point of 120 to 130°C, relative density of 0.93 g/cm³, and not readily biodegradable. view less | |
| Nourybond® 289 Adhesion Promoter | Evonik Operations GmbH, BL Crosslinkers | Nourybond® 289 Adhesion Promoter is a blocked isocyanate PVC plastisol adhesion promoter intended for use in automotive sealants applied to visible areas and anti-chip primers. It is designed to provide adhesion to electrodeposition primers used in the m...view more Nourybond® 289 Adhesion Promoter is a blocked isocyanate PVC plastisol adhesion promoter intended for use in automotive sealants applied to visible areas and anti-chip primers. It is designed to provide adhesion to electrodeposition primers used in the manufacture of automobiles, trucks and buses. view less | Request Sample |
| Pinerez® 2394 E | Lawter | Pinerez® 2394 E is a stabilized gum rosin ester that is ideal for improving adhesion and tack in hot-melt adhesives. The product is part of the Pinerez™ range of products that are stabilized resins with good viscosity stability and show compatibility with...view more Pinerez® 2394 E is a stabilized gum rosin ester that is ideal for improving adhesion and tack in hot-melt adhesives. The product is part of the Pinerez™ range of products that are stabilized resins with good viscosity stability and show compatibility with various polymers that are used in pressure-sensitives adhesives. view less | |
| Pinerez® 2396 E | Lawter | Pinerez® 2396 E is a tackifier resin that is ideally suited to improve adhesion and tack in hot-melt adhesives. The product is part of the Pinerez™ range of products that are stabilized resins with good viscosity stability and show compatibility with vari...view more Pinerez® 2396 E is a tackifier resin that is ideally suited to improve adhesion and tack in hot-melt adhesives. The product is part of the Pinerez™ range of products that are stabilized resins with good viscosity stability and show compatibility with various polymers that are used in pressure-sensitives adhesives. view less | |
| Pinerez® 3065 E | Lawter | Pinerez® 3065 E is a tackifier resin with non-crystallizing properties that make it ideal to improve peel and tack in adhesives. The resin is typically used in flooring adhesives. | |
| Pinerez® 7015 E | Lawter | Pinerez® 7015 E is a tackifier resin with low viscosity liquid of ester rosin that has a low level of volatile organic components (VOC's). The resin is typically used in flooring adhesives. | |
| Pinerez® 7016 E | Lawter | Pinerez® 7016 E is a low viscosity ester of rosin that has low volatile organic components (VOC's). They show good compatibility with various polymers and also shows good viscosity stability. The resin improves adhesion in flooring adhesives. | |
| Pinerez® 7053 E | Lawter | Pinerez® 7053 E is a formulated blend of plasticizers and resins that are used as a resin melt tackifier. The product is ideally suited for use in flooring adhesives. | |
| Polurene BK 50 AE | S.A.P.I.C.I. SpA | Polurene BK 50 AE is a TDI-based polymer containing blocked and curable isocyanic groups. This product can be used as an adhesive in non-woven fabrics, PVC, and fabric laminations, among other uses. It contains 50% non-volatiles. | |
| Polurene LPI 103 | S.A.P.I.C.I. SpA | Polurene LPI 103 is an MDI-based 1K adhesive. This product has strong initial bond. It can be used in PVC applications, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 407 | S.A.P.I.C.I. SpA | Polurene LPI 407is a MDI-based polyester/polyether blend 2K adhesive in ethyl acetate. This product has strong initial bond and can be used in PVC, polyurethane, and natural or synthetic fabrics. | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...view more PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. view less | |
| PVP K-120 | Ashland | PVP K-120 is a polyvinylpyrrolidone that is considered to be physiologically inert and can be plasticized with water and most common organic plasticizers. Applications include use as a metal quenchant bath. | |
| PVP K-15 | Ashland | PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| PVP K-30 | Ashland | PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| PVP K-60 | Ashland | PVP K-60 is a polyvinylpyrrolidone that is considered to be physiologically inert and can be plasticized with water and most common organic plasticizers. | |
| R-1130 | NuSil Silicone Technology 1 | R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and ...view more R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and connectors. It is ideal for overhead or side wall applications due to its non-slumping characteristics. view less | |
| R-1140 | NuSil Silicone Technology 1 | R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces ...view more R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces and other silicone rubbers. It is best used for applications that require an operating temperature rang of 65 to 240°C (-85 to 465°F). view less | |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...view more R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by appl...view more R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. view less | |
| R-2682-12 | NuSil Silicone Technology 1 | R-2682-12 is a RTV silicone film adhesive that cures at room temperature, or rapidly with heat from in an oven or with a heating lamp. It can be used for bonding or sealing silicone elastomers and some metals or plastic. This product can also be used for ...view more R-2682-12 is a RTV silicone film adhesive that cures at room temperature, or rapidly with heat from in an oven or with a heating lamp. It can be used for bonding or sealing silicone elastomers and some metals or plastic. This product can also be used for applications that would require shorter processing times, easy clean-up, and consistent bond thickness. view less | |
| R1-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by si...view more R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing, This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. view less | |
| R1-3930-11 | NuSil Silicone Technology 1 | R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for ...view more R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for bonding or protecting hardware components exposed to gasoline or aviation fuels. It can be further dispersed for spraying applications. view less | |
| R2-3930-11 | NuSil Silicone Technology 1 | R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...view more R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. view less | |
| R3-3930-11 | NuSil Silicone Technology 1 | R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and ...view more R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance.This product can be used to bond or protect hardware components that are exposed to gasoline or aviation fuels. view less | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...view more R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. view less | |
| R33-2186 | NuSil Silicone Technology 1 | R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...view more R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). view less | |
| SCV-2590 | NuSil Silicone Technology 1 | SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from b...view more SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from building in sensitive devices. This product also features Ultra Low OutgassingTM which exceeds specifications outlined in NASA and the European Space Agency. view less | |
| SCV-2590-2 | NuSil Silicone Technology 1 | SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assem...view more SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assemblies from extreme temperatures, humidity and radiation. It also features Ultra Low OutgassingTM which makes it ideal to protect sensitive devices from condensation. view less | |
| SCV1-2590 | NuSil Silicone Technology 1 | SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require lo...view more SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require low outgassing to avoid condensation in sensitive devices. view less | |
| SCV1-2596 | NuSil Silicone Technology 1 | SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI...view more SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI and EMI shielding in electrical and space applications and is well suited to for form-in-place conductive gaskets. view less | |
| Snowtack™ 100G | Lawter | Snowtack™ 100G is a waterborne tackifier with a high softening point, is solvent-free and has a resin ester component that brings superior adhesive performance to a variety of substrates. It shows compatibility with acrylic and other polymers and provides...view more Snowtack™ 100G is a waterborne tackifier with a high softening point, is solvent-free and has a resin ester component that brings superior adhesive performance to a variety of substrates. It shows compatibility with acrylic and other polymers and provides adhesion to high and low-energy surfaces. The product also displays high cohesion, good mechanical stability with water and heat resistance as other benefits. It has applications in waterborne, pressure-sensitive adhesives in various industries. view less | |
| Snowtack™ 779F | Lawter | Snowtack™ 779F is a waterborne tackifier dispersant that is solvent free and with a resin component that provides superior adhesive ability to a variety of substrates. It is mechanically stable, APE-free and is used in waterborne adhesives in various indu...view more Snowtack™ 779F is a waterborne tackifier dispersant that is solvent free and with a resin component that provides superior adhesive ability to a variety of substrates. It is mechanically stable, APE-free and is used in waterborne adhesives in various industries. view less | |
| Snowtack™ 875F | Lawter | Snowtack™ 875F is a waterborne tackifier dispersion that is solvent-free with a blend of modified rosin and non-rosin that brings superior adhesive performance to a variety of substrates. It is APE-free, has good mechanical stability and water resistance,...view more Snowtack™ 875F is a waterborne tackifier dispersion that is solvent-free with a blend of modified rosin and non-rosin that brings superior adhesive performance to a variety of substrates. It is APE-free, has good mechanical stability and water resistance, a high cohesion and facilitates adhesion to high and low-energy surfaces. The product is used in various waterborne adhesive systems. view less | |
| Snowtack™ SE780K | Lawter | Snowtack™ SE780K is a waterborne tackifier that is solvent-free and has a resin component that offers superior adhesive ability to a variety of substrates. It displays good water resistance, is APE-free, has good mechanical stability and high cohesion. Th...view more Snowtack™ SE780K is a waterborne tackifier that is solvent-free and has a resin component that offers superior adhesive ability to a variety of substrates. It displays good water resistance, is APE-free, has good mechanical stability and high cohesion. The product has applications in various waterborne adhesive systems. view less | |
| Solacril 105 ACP | Ichemco | Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protectiv...view more Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protective films for plastic and metal surfaces, as well as removable tapes and labels. view less | |
| Solacril 2010 | Ichemco | Solacril 2010 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 53-57% and a peel of 1200-1600 g/in. Solacril 2010 is most commonly used in industrial pressure sensitive adhesive tape and decal produc...view more Solacril 2010 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 53-57% and a peel of 1200-1600 g/in. Solacril 2010 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
| Solacril 203 | Ichemco | Solacril 203 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42% and a peel of 600-800 g/in. Solacril 203 is most commonly used in protective film applications. | |
| Solacril 204 | Ichemco | Solacril 204 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 1-3 cm, and a peel of 500-800 g/in. Solacril 204 is most commonly used in protective film applications. | |
| Solacril 44 | Ichemco | Solacril 44 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of greater than 20 cm, and a peel of 1000-1300 g/in. Solacril 44 is most commonly used in plastic, paper, polyurethane ...view more Solacril 44 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of greater than 20 cm, and a peel of 1000-1300 g/in. Solacril 44 is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
| Solacril 44 D | Ichemco | Solacril 44 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%, has a tack of 3-9 cm, and a peel of 950-1450 g/in. Solacril 44 D is most commonly used in plastic, paper, polyurethane foam, fab...view more Solacril 44 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%, has a tack of 3-9 cm, and a peel of 950-1450 g/in. Solacril 44 D is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
| Solacril 55 MED | Ichemco | Solacril 55 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-5 cm, and a peel of 1700-1900 g/in. Solacril 55 MED is most commonly used in plastic, paper, polyurethane foam...view more Solacril 55 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-5 cm, and a peel of 1700-1900 g/in. Solacril 55 MED is most commonly used in plastic, paper, polyurethane foam, fabric, and leather substrate applications. view less | |
| Solacril 701 | Ichemco | Solacril 701 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 42-44% and a peel of 2000-2400 g/in. Solacril 701 is most commonly used in plastic film as well as paper, polyurethane foam, fabric, and ...view more Solacril 701 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 42-44% and a peel of 2000-2400 g/in. Solacril 701 is most commonly used in plastic film as well as paper, polyurethane foam, fabric, and leather substrate applications. view less | |
| Solacril 744 | Ichemco | Solacril 744 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 48-52%, has a tack of 5-10 cm, and has a peel of 900-1100 g/in. Solacril 744 is most commonly used in industrial pressure sensitive adhes...view more Solacril 744 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 48-52%, has a tack of 5-10 cm, and has a peel of 900-1100 g/in. Solacril 744 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
| Solacril 744 AS | Ichemco | Solacril 744 AS is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-8 cm, and has a peel of 900-1200 g/in. Solacril 744 AS is most commonly used in industrial pressure sensitive ...view more Solacril 744 AS is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42%, has a tack of 3-8 cm, and has a peel of 900-1200 g/in. Solacril 744 AS is most commonly used in industrial pressure sensitive adhesive tape, label, and decal production applications. view less | |
| Solacril 744 D | Ichemco | Solacril 744 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36% and a peel of 1100 g/in. Solacril 744 D is most commonly used in industrial pressure sensitive adhesive tape and decal productio...view more Solacril 744 D is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36% and a peel of 1100 g/in. Solacril 744 D is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
| Solacril 744 T | Ichemco | Solacril 744 T is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 19-21%, has a tack of 5-10 cm, and has a peel of 850-1100 g/in. Solacril 744 T is most commonly used in industrial pressure sensitive a...view more Solacril 744 T is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 19-21%, has a tack of 5-10 cm, and has a peel of 850-1100 g/in. Solacril 744 T is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. view less | |
| Solacril 758 | Ichemco | Solacril 758 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%. Solacril 758 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
| Solacril 758/35 | Ichemco | Solacril 758/35 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 34-36%. Solacril 758/35 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
| Solacril 758/46 | Ichemco | Solacril 758/46 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 45-47%. Solacril 758/46 is most commonly used in industrial pressure sensitive adhesive tape and decal production applications. | |
| Solacril 957 MED | Ichemco | Solacril 957 MED is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 45-47% and a peel of 1400-1600 g/in. Solacril 957 MED is most commonly used in medical applications. | |
| Solacril SPR 12 M3 | Ichemco | Solacril SPR 12 M3 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 8.5-10.5%. Solacril SPR 12 M3 is most commonly used in spray applications. | |
| Solacril WS 33 | Ichemco | Solacril WS 33 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 29-31%. Solacril WS 33 is most commonly used as a base in finished adhesive applications. | |
| Solacril WS 40 | Ichemco | Solacril WS 40 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 800-1200 g/in. Solacril WS 40 is most commonly used in single and double-sided tape, as well as water-soluble labe...view more Solacril WS 40 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 800-1200 g/in. Solacril WS 40 is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
| Solacril WS 60 | Ichemco | Solacril WS 60 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 600-900 g/in. Solacril WS 60 is most commonly used in single and double-sided tape, as well as water-soluble label...view more Solacril WS 60 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52% and a peel of 600-900 g/in. Solacril WS 60 is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
| Solacril WS 60 AF | Ichemco | Solacril WS 60 AF is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52%. Solacril WS 60 AF is most commonly used in single and double-sided tape, as well as water-soluble label production applicati...view more Solacril WS 60 AF is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 50-52%. Solacril WS 60 AF is most commonly used in single and double-sided tape, as well as water-soluble label production applications. view less | |
| Tackwhite A 305 SL | Ichemco | Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a high...view more Tackwhite A 305 SL is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL is most commonly used in permanent paper label applications where a higher adhesive power is required. view less | |
| Tackwhite A 305 SL (V2) | Ichemco | Tackwhite A 305 SL (V2) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion.Tackwhite A 305 SL (V2) is most commonly used in permanent paper label applications wh...view more Tackwhite A 305 SL (V2) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion.Tackwhite A 305 SL (V2) is most commonly used in permanent paper label applications where a higher adhesive power is required. view less | |
| Tackwhite A 305 SL (V3) | Ichemco | Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications w...view more Tackwhite A 305 SL (V3) is a water based pressure sensitive adhesive, based on acrylic polymers and rosin esters tackifiers, with good tack and excellent peel adhesion. Tackwhite A 305 SL (V3) is most commonly used in permanent paper label applications where a higher adhesive power is required. view less | |
| Tackwhite A 33 | Ichemco | Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and li...view more Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
| Tackwhite A 33 (V1) | Ichemco | Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transpar...view more Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
| Tackwhite A 33 (V2) | Ichemco | Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transpar...view more Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
| Tackwhite A 38 | Ichemco | Tackwhite A 38 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 47-49%, a tack of 2-6 cm, and a peel of 900-1200 g/in. Tackwhite A 38 is most commonly used in wash removable label applications. |
