| AT-6256 | Antex Chemicals (Zhongshan) Limited | AT-6256 is a self cross-linking, all-acrylic copolymer that appears as a milky, white liquid. This product can be used as a flocking adhesive for cotton and nylon substrates, and exhibits soft handfeel, good scrubbing resistance and low formaldehyde. | |
| AT-6258 | Antex Chemicals (Zhongshan) Limited | AT-6258 is a self cross-linking all-acrylic copolymer that appears as a milky, white liquid. This product can be used as a flocking adhesive for cotton and nylon substrates, and exhibits soft handfeel, good scrubbing resistance, and low formaldehyde. | |
| AT-6959A | Antex Chemicals (Zhongshan) Limited | AT-6959A is a self cross-linking all acrylic emulsion that appears as a milky, white liquid with low film-forming temperature and good mechanical stability. This product can be used for electrostatic flocking adhesive and non-woven coating applications. | |
| BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...view more BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...view more DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. view less | |
| EPOXY METHACRYLATE 97-053 | Rahn AG | EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion ...view more EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion and monomer-free. It improves resistance to solvents and chemicals. EPOXY METHACRYLATE 97-053 is designed for dental composites, UV adhesives and UV curtain systems. view less | Request Sample |
| GENOMER* 4188/EHA | Rahn AG | GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industr...view more GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. view less | Request Sample |
| GENOMER* 4188/M22 | Rahn AG | GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives a...view more GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. view less | Request Sample |
| GENOMER* 4205 | Rahn AG | GENOMER* 4205 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: dental composites, sterolithography and adhesives. | Request Sample |
| GENOMER* 4247 | Rahn AG | GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low...view more GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low viscosity, and medium-high reactivity. This product provides films with exceptional hardness and good mechanical properties. It is recommended for clear and pigmented coatings. view less | Request Sample |
| GENOMER* 4256 | Rahn AG | GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...view more GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. view less | Request Sample |
| GENOMER* 4269/M22 | Rahn AG | GENOMER* 4269/M22 is an aliphatic urethane acrylate in GENOMER* 1122. It is a resin for radically curable coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and printing inks and var...view more GENOMER* 4269/M22 is an aliphatic urethane acrylate in GENOMER* 1122. It is a resin for radically curable coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and printing inks and varnishes for plastic foils (PVC, PE etc.). The cured oligomer provides excellent mechanical properties. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less | Request Sample |
| GENOMER* 4297 | Rahn AG | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...view more GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. view less | Request Sample |
| GENOMER* 4312TF | Rahn AG | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...view more GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. view less | Request Sample |
| Isocryl® C-70 | Estron Chemical, Inc. | Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford co...view more Isocryl® C-70 is a moderate to high Tg carboxyl functional solid acrylic resin suitable for use as a curative resin in epoxy formulations, such as acrylic hybrid powder coatings, industrial solvent based coatings, or adhesives. Isocryl® C-70 can afford coatings or adhesives with excellent chemical resistance, flexibility, outdoor durability, green strength, modulus and impact resistance. Because of its relatively high acid value, Isocryl® C-70 may provide enhanced adhesion to certain substrates and may be a good pigment dispersing resin. view less | |
| Makrovil PAC 617 | Indulor Chemie GmbH | Makrovil PAC 617 is an acrylic polymer emulsion. It is a binder with excellent penetration, very good strengthening of substrate, excellent freeze/thaw stability, and is finely dispersed. Makrovil PAC 617 is used in water-based sealing primers. | |
| Makrovil V 344 | Indulor Chemie GmbH | Makrovil V 344 is an homopolymeric emulsion based on vinyl acetate. It is a binder and raw material for wood and paper adhesives. This product has very high solubility in water. Makrovil V 344 is used in wood and paper adhesives, textile finishing, and ad...view more Makrovil V 344 is an homopolymeric emulsion based on vinyl acetate. It is a binder and raw material for wood and paper adhesives. This product has very high solubility in water. Makrovil V 344 is used in wood and paper adhesives, textile finishing, and adhesives. view less | |
| Mowinyl 6530 | Nippon Gohsei | Mowinyl 6530 is a synthetic acrylic resin emulsion that provides good adherence to various substrates, as well as good heat, water, alkaline, and blocking resistances. This product is well suited for use in paints and coatings for metal surface applicatio...view more Mowinyl 6530 is a synthetic acrylic resin emulsion that provides good adherence to various substrates, as well as good heat, water, alkaline, and blocking resistances. This product is well suited for use in paints and coatings for metal surface applications. view less | |
| Mowinyl 6720 | Nippon Gohsei | Mowinyl 6720 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to films and topcoats, this product is well suited for use in primer and sealer applications. | |
| Mowinyl 743N | Nippon Gohsei | Mowinyl 743N is a synthetic acrylic resin emulsion that provides good adherence and alkaline resistance. This product is well suited for use in primers, sealers, paints, and coatings. | |
| Mowinyl 745 | Nippon Gohsei | Mowinyl 745 is a synthetic acrylic resin emulsion with an added auxiliary filming agent. This product is well suited for use in clear coats, sealers, and gloss varnishes for paper. | |
| Mowinyl 880 | Nippon Gohsei | Mowinyl 880 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring good miscible stability with colloidal silica, this product is well suited for use in clear coat and sealer applications. | |
| Mowinyl 940 | Nippon Gohsei | Mowinyl 940 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to base materials, this product is well suited for use in primer and sealer applications. | |
| Neboplast® SB 8565 | NECARBO B.V. | Neboplast® SB 8565 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is plasticizer and APE free, has pigment binding properties, and forms a flexible film. Neboplast® SB 8565 finds use as a water-based wall paint binders s...view more Neboplast® SB 8565 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is plasticizer and APE free, has pigment binding properties, and forms a flexible film. Neboplast® SB 8565 finds use as a water-based wall paint binders such as in the formulation of indoor and outdoor wall paints with scrub resistance, and in roof coating formulations, sealants, mineral substrate adhesives, and crack-bridging applications. view less | |
| Neboplast® SB 8750 | NECARBO B.V. | Neboplast® SB 8750 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake and whitening, is alkali and water resistant, and has pigment binding properties. Nebo...view more Neboplast® SB 8750 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake and whitening, is alkali and water resistant, and has pigment binding properties. Neboplast® SB 8750 finds use in the formulation of indoor and outdoor coatings from low to high PVC, and in sealants, adhesives, and roof coatings. view less | |
| Neboplast® SB 8757 | NECARBO B.V. | Neboplast® SB 8757 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate, plasticizer, and ammonia free, and is alkali and water resistant. Neboplast® SB 8757 finds use in the formulation of top quality...view more Neboplast® SB 8757 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate, plasticizer, and ammonia free, and is alkali and water resistant. Neboplast® SB 8757 finds use in the formulation of top quality indoor and outdoor emulsion wall paints, roof coating formulations, sealants, mineral substrate adhesives, and cement modification. view less | |
| Neboplast® SB 8765 | NECARBO B.V. | Neboplast® SB 8765 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake, pigment binding properties, and is alkali and water resistant. Neboplast® SB 8765 for...view more Neboplast® SB 8765 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake, pigment binding properties, and is alkali and water resistant. Neboplast® SB 8765 forms a flexible film and finds application in the formulation of indoor and outdoor coatings, sealants, adhesives, and crack-binding systems. view less | |
| Tackifier 71 | Ichemco | Tackifier 71 is an acrylic aqueous dispersion. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 40-150 mPa.s. Tackifier 71 is most commonly used as a tackifier in water-based acrylic pressure sensitive adhesive produ...view more Tackifier 71 is an acrylic aqueous dispersion. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of 40-150 mPa.s. Tackifier 71 is most commonly used as a tackifier in water-based acrylic pressure sensitive adhesive production applications. view less | |
| Tackwhite A 12 X | Ichemco | Tackwhite A 12 X is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 66-68% as a Brookfield viscosity at 25°C of 500-1000 mPa.s. Tackwhite A 12 X is most commonly used in permanent paper and film label produc...view more Tackwhite A 12 X is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 66-68% as a Brookfield viscosity at 25°C of 500-1000 mPa.s. Tackwhite A 12 X is most commonly used in permanent paper and film label production applications. view less | |
| Tackwhite A 22 RP | Ichemco | Tackwhite A 22 RP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52%, a tack of 7-15 cm, and a peel of 650-950 g/in. Tackwhite A 22 RP is most commonly used in film label production applications. | |
| Tackwhite A 2P 50 | Ichemco | Tackwhite A 2P 50 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 2P 50 is most commonly used in pressure sensitive article productio...view more Tackwhite A 2P 50 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Tackwhite A 2P 50 is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V) | Ichemco | Tackwhite A 2P 50 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Tackwhite A 2P 50 (V) is most commonly used in pressure sensitive article ...view more Tackwhite A 2P 50 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Tackwhite A 2P 50 (V) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V1) | Ichemco | Tackwhite A 2P 50 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 2P 50 (V1) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 50 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 2P 50 (V1) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 50 (V2) | Ichemco | Tackwhite A 2P 50 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 50 (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 50 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-50% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 50 (V2) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 | Ichemco | Tackwhite A 2P 60 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 600-900 mPa.s. Tackwhite A 2P 60 is most commonly used in pressure sensitive article production...view more Tackwhite A 2P 60 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 600-900 mPa.s. Tackwhite A 2P 60 is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 (V) | Ichemco | Tackwhite A 2P 60 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 4000-5000 mPa.s. Tackwhite A 2P 60 (V) is most commonly used in pressure sensitive article ...view more Tackwhite A 2P 60 (V) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 4000-5000 mPa.s. Tackwhite A 2P 60 (V) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Tackwhite A 2P 60 (V2) | Ichemco | Tackwhite A 2P 60 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 60 (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 2P 60 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-57% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 2P 60 (V2) is most commonly used in pressure sensitive article production applications where higher tack, adhesion, water-resistance, and cold-resistance are required. view less | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer designed for use in cold seal adhesives. Excellent early water resistance. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a cold seal adhesive binder with high pigment binding properties. Can be used in combination with Texicryl® 13-528 to achieve desired properties. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| TKA-396 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environmen...view more TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environment. It finds application in alcohol soluble inks, coatings, and adhesives. view less |
