| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...view more DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. view less | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...view more DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. view less | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...view more DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. view less | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...view more DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. view less | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...view more DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. view less | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...view more DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. view less | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...view more DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. view less | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...view more DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. view less | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...view more DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...view more DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...view more DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...view more DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...view more DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...view more DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. view less | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....view more DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...view more DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. view less | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...view more DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. view less | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...view more DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. view less | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...view more DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...view more DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...view more DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| DABCO® 1027 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 1027 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled activity catalyst for MEG extended polyester and polyether systems. | |
| DABCO® 1028 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 1028 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled-activity catalyst for 1,4-butanediol extended polyester and polyether systems. | |
| DABCO® 25 S | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 25 S is 25% TEDA dissolved in 1,4-butanediol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 33 LV | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 33 LV is a 33% TEDA dissolved in dipropylene glycol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 33 S | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 33 S is 33% TEDA dissolved in 1,4-butanediol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 8154 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 8154 is an acid-blocked delayed action catalyst that is useful in extending pot life. | |
| DABCO® DMDEE | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DMDEE is an amine catalyst that is isocyanate stable. It is used in one component moisture cured applications in CASE. | |
| DABCO® EG | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® EG is 33% TEDA dissolved in ethylene glycol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® T 9 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 9 (stannous octoate) is a strong metal based urethane (polyol-isocyanate) catalyst that is primarily used in flexible slabstock polyurethane foams. | |
| DAOTAN® STW 6434/40WA | Allnex | DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for...view more DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for waterborne OEM primer-surfacers to improve stone chipping resistance. view less | Request Sample |
| DAOTAN® TW 1225/40WANEP | Allnex | Daotan® TW 1225/40WANEP is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has shear stability and pigment compatibility, giving highly flexible films. | Request Sample |
| DAOTAN® TW 1252/42WA | Allnex | DAOTAN® TW 1252/42WA is a polyurethane dispersion modified with drying fatty acids, 42% solids in water (42WA), (containing also 3 % n-ethyl-2-pyrrolidone). | Request Sample |
| DAOTAN® TW 6425/40WA | Allnex | Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly ...view more Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM. view less | Request Sample |
| DAOTAN® TW 6431/45WA | Allnex | Daotan® TW 6431/45WA is a physically drying, solvent and surfactant free, aqueous aliphatic polyurethane-urea-dispersion based on polybutadiene. Fast drying and provides clear, crack free and highly flexible films. Main application of Daotan® TW 6431/45WA...view more Daotan® TW 6431/45WA is a physically drying, solvent and surfactant free, aqueous aliphatic polyurethane-urea-dispersion based on polybutadiene. Fast drying and provides clear, crack free and highly flexible films. Main application of Daotan® TW 6431/45WA is coating and sealing of a wide variety of substrates, when flexibility and chemical resistance or even stripability of the coating is necessary. view less | Request Sample |
| DAOTAN® TW 6439/30WA | Allnex | Daotan® TW 6439/30WA is recommended as the NMP/NEP- free alternative for Daotan (V)TW 1237. Alike latter Daotan TW 6439 is a polyester-based, high molecular weight polyurethane dispersion. Dried at ambient temperature, this product provides clear, crack-f...view more Daotan® TW 6439/30WA is recommended as the NMP/NEP- free alternative for Daotan (V)TW 1237. Alike latter Daotan TW 6439 is a polyester-based, high molecular weight polyurethane dispersion. Dried at ambient temperature, this product provides clear, crack-free films without further addition of organic solvents. These films also exhibit excellent elasticity and mechanical properties. view less | Request Sample |
| DAOTAN® TW 6442/42WA | Allnex | DAOTAN® TW 6442/42WA is a Polyurethane dispersion modified with drying fatty acids. | Request Sample |
| DAOTAN® TW 6450/30WA | Allnex | DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further a...view more DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates view less | Request Sample |
| DAOTAN® TW 6451/32WA | Allnex | DAOTAN® TW 6451/32WA is an aqueous, low-viscous polyurethane dispersion, polyester based with aromatic and aliphatic parts. It is recommended as the NMP / NEP- free alternative for Daotan (V)TW 1235. Alike latter Daotan TW 6451 is a polyesterbased, shear ...view more DAOTAN® TW 6451/32WA is an aqueous, low-viscous polyurethane dispersion, polyester based with aromatic and aliphatic parts. It is recommended as the NMP / NEP- free alternative for Daotan (V)TW 1235. Alike latter Daotan TW 6451 is a polyesterbased, shear stable, high molecular weight polyurethane dispersion. Dried at ambient temperature Daotan TW 6451 is providing clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates. view less | Request Sample |
| DAOTAN® TW 6452/30WA | Allnex | DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based. It is recommended for waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop), water r...view more DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based. It is recommended for waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop), water resistance as well as mechanical properties. view less | Request Sample |
| DAOTAN® TW 6464/36WA | Allnex | Daotan® TW 6464/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance. | Request Sample |
| DAOTAN® TW 6466/36WA | Allnex | DAOTAN® TW 6466/36WA is an aqueous emulsion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It is a polyester- based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of so...view more DAOTAN® TW 6466/36WA is an aqueous emulsion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It is a polyester- based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature DAOTAN® TW 6466 yields clear and crack-free films without any previous addition of solvents or paint additives. view less | Request Sample |
| DAOTAN® TW 6473/37WA | Allnex | Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provide...view more Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provides good shear stability and pigment compatibility. view less | Request Sample |
| DAOTAN® TW 6474/37WA | Allnex | Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time ...view more Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time and early hardness development. It can also be used for improving the flexibility of acrylic dispersion coatings. view less | Request Sample |
| DAOTAN® TW 6490/35WA | Allnex | Daotan® TW 6490/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. It is recommended for waterborne plastic Primers and Basecoats. | Request Sample |
| DAOTAN® TW 6491/33WA | Allnex | Daotan® TW 6491/33WA is a waterborne, high molecular weight, polyether- based Polyurethane dispersion, free of solvents and emulsifiers. Coatings based on Daotan TW 6491 provide quick drying and yield transparent, crack free films without further addition...view more Daotan® TW 6491/33WA is a waterborne, high molecular weight, polyether- based Polyurethane dispersion, free of solvents and emulsifiers. Coatings based on Daotan TW 6491 provide quick drying and yield transparent, crack free films without further addition of co- solvents. Outstanding features are very high elasticity and elongation. view less | Request Sample |
| DAOTAN® TW 6493/35WA | Allnex | DAOTAN® TW 6493/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films, where as for drying at ambient temperature additional solvents are needed. | Request Sample |
| DAOTAN® TW 6495/35WA | Allnex | DAOTAN® TW 6495/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films. It is recommended for waterborne plastic primers and basecoats. | Request Sample |
| DAOTAN® TW 7000/40WA | Allnex | Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles,...view more Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). view less | Request Sample |
| DAOTAN® TW 7010/36WA | Allnex | DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for f...view more DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). Highest water and chemical resistance, high Tg, view less | Request Sample |
| DAOTAN® TW 7050/34WA | Allnex | DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous ad...view more DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous addition of solvents or paint additives. view less | Request Sample |
| DAOTAN® TW 7061/35WA | Allnex | DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free ...view more DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free films without any previous addition of solvents or paint additives. view less | Request Sample |
| DAOTAN® TW 7063/36WA | Allnex | DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free ...view more DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free films without any previous additions of solvents or paint additives. view less | Request Sample |
| DAOTAN® TW 7064/36WA | Allnex | DAOTAN® TW 7064/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance. | Request Sample |
| DAOTAN® TW 7065/36WA | Allnex | DAOTAN® TW 7065/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical and abrasion resistance. | Request Sample |
| DAOTAN® TW 7066/36WA | Allnex | DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free...view more DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free films without any previous addition of solvents or paint additives. view less | Request Sample |
| DAOTAN® VTW 1225/40WA | Allnex | Daotan® VTW 1225/40WA is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has highly flexible coating systems especially for primers and decorative top coats for plastics. | Request Sample |
| DAOTAN® VTW 1250/40WA | Allnex | Daotan® VTW 1250/40WA is an aromatic polyurethane-dispersion modified with drying fatty acids. It's used as a sole binder for corrosion protection systems. | Request Sample |
| DAOTAN® VTW 1262/35WA | Allnex | Daotan® VTW 1262/35WA is a polyurethane emulsion that needs no further film formers to give clear flexible films when dried at room temperature. | Request Sample |
| DAOTAN® VTW 1265/36WA | Allnex | Daotan® VTW 1265/36WA is an aqueous, solvent-free, self crosslinking polyurethane dispersion. It can be preferably used for plastic coatings. | Request Sample |
| DAOTAN® VTW 1686/40WA | Allnex | Daotan® VTW 1686/40WA is a polyester-modified acrylic dispersion containing epoxy groups used as sole binder or in combination with melamine resins and/or polyurethane dispersions for the production of waterdilutable industrial paints, e.g. base coats. | Request Sample |
| DAOTAN® VTW 2229/40WANMP | Allnex | Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers...view more Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers. view less | Request Sample |
| DAOTAN® VTW 6421/42WA | Allnex | Daotan® VTW 6421/42WA is a waterborn, clear solution of polyurethane resin, and has excellent adhesion and flexibility properties. It can be used as additional binder in 1pack and 2pack coating formulations and adhesives. | Request Sample |
| DAOTAN® VTW 6460/35WA | Allnex | Daotan® VTW 6460/35WA is an aqueous polyurethane dispersion, solvent-free. It is suitable for the formulation of aqueous, ambient temperature or force dried industrial coatings - especially aqueous basecoats for the automotive industry. | Request Sample |
| DAOTAN® VTW 6462/36WA | Allnex | Daotan® VTW 6462/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, self cross-linking, solvent and emulsifier free. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, fl...view more Daotan® VTW 6462/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, self cross-linking, solvent and emulsifier free. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, flexible PVC and PMMA. Aqueous primers and base coats can be formulated. view less | Request Sample |
| DAOTAN® VTW 6463/36WA | Allnex | Daotan® VTW 6463/36WA is an aqueous dispersion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It has very good wetting properties, and quick curing to give clear crack-free films. | Request Sample |
| Deco-Coat DC-2501R | Epoxies, Etc. | Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...view more Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. view less | |
| Deco-Coat DC-2510 | Epoxies, Etc. | Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelera...view more Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. view less | |
| Deco-Coat DC-2550 | Epoxies, Etc. | Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this prod...view more Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this product is ideal for use in applications such as labels, plaques, emblems, badges, key & luggage tags, and wood trim kits. view less | |
| Decotherm™ 100 E | Lawter | Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed ...view more Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed on steel, flat tin or aluminum products. view less | |
| Decotherm™ 220 E | Lawter | Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK re...view more Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK resistance. Other applications include uses in white and colored inks. view less | |
| Decotherm™ 255 E | Lawter | Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printi...view more Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printing or dry offsets for 2-piece decorative cans. Other applications include colored or white inks. view less | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...view more Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. view less | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...view more Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. view less | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...view more DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). view less | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...view more DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...view more DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. view less | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. view less | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...view more DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. view less | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...view more DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. view less | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...view more DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). view less | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...view more DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. view less | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...view more DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...view more DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| DESAVIN® | Covestro | Di (phenoxyethyl) formal. Lightfast and very effective flexibilizer with good resistance to alkalis and acids and low volatility. | |
| DESMOCAP® 11 | Covestro | A branched polymer with ether and urethane groups; contains crosslinking, blocked isocyanate groups. Used as a raw material in the flexibilisation of epoxy resins and the formulation of flexible coatings and sealing compounds. | |
| DESMOCAP® 1190 | Covestro | A branched polymer with ether and urethane groups; contains crosslinking, blocked isocyanate groups. Used as a raw material in the flexibilisation of epoxy resins and the formulation of flexible coatings and sealing compounds. | |
| DESMOCAP® 12 | Covestro | A linear polyurethane prepolymer with crosslinking blocked isocyanate groups. Used as a raw material for the flexibilisation of epoxy resins and in the formulation of flexible coatings and sealants. Desmocap 12 yields softer and more flexible systems than...view more A linear polyurethane prepolymer with crosslinking blocked isocyanate groups. Used as a raw material for the flexibilisation of epoxy resins and in the formulation of flexible coatings and sealants. Desmocap 12 yields softer and more flexible systems than Desmocap 11. view less | |
| DESMODUR® 2460 M | Covestro | A monomeric diphenylmethane diisocyanate with high 2,4'-isomer content and stabilized against discoloration during storage. Formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Is an...view more A monomeric diphenylmethane diisocyanate with high 2,4'-isomer content and stabilized against discoloration during storage. Formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Is an isomeric mixture of monomeric diphenylmethane diisocyanate that is liquid at temperatures above 20 °C. Storage and handling are greatly simplified compared to 4,4' isomer that is solid at room temperature. view less | |
| DESMODUR® 44 M FLAKES | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 M FUSED | Covestro | A monomeric diisocyanate that is used in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 M LIQUID | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC FLAKES | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC FUSED | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC LIQUID | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| Desmodur® 44 V 70 L | Covestro | Desmodur® 44 V 70 L is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). This mixture of monomeric polyisocyanates in connection with Baycoll® is suitable for the construction of solvent-free adhesi...view more Desmodur® 44 V 70 L is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). This mixture of monomeric polyisocyanates in connection with Baycoll® is suitable for the construction of solvent-free adhesives. view less | |
| Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI. Ideal for use in combination with cycloaliphatic diamines such as Laromin C 260 (BASF) to formulate highly flexible, one-component stoving coatings. |
