| BYK®-354 | BYK | BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tens...view more BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. These additives are thermally stable. Due to its high molecular weight and its unpolar structure, BYK-354 has both leveling and air release properties. view less | |
| BYK®-3550 | BYK | BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Dependi...view more BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Depending on the polarity of the system, BYK®-3550 shows different properties. In polar systems the additive shows an excellent compatibility in the coating, which leads to a homogeneous distribution in the film. view less | |
| BYK®-356 | BYK | BYK®-356 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate is the solvent-free version of BYK-355. | |
| BYK®-358 N | BYK | BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and doe...view more BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and does not negatively influence the recoatability and intercoat adhesion. This product is suited for high quality pigmented and non-pigmented industrial coatings. BYK®-358 N does not cause turbidity in clear coats or haze in pigmented systems. This additive is thermally stable. view less | |
| BYK®-359 | BYK | BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slig...view more BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced, and these additives are thermally stable. BYK-359 is mainly used as a leveling and anti-cratering additive in industrial coatings and coil coatings. Additionally it acts as a defoaming and air release agent. view less | |
| BYK®-359 For Powder | BYK | BYK®-359 For Powder is anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This pr...view more BYK®-359 For Powder is anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent anti-cratering along with optimum leveling. Fisheyes and pinholes are prevented to produce the best DOI (distinction of image) in the powder coating film. BYK-359 ensures quick and easy incorporation into the binder due to its good compatibility and low product viscosity. view less | |
| BYK®-360 P | BYK | BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additio...view more BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additionally, BYK-360 P prevents surface defects specific to powder coatings such as craters, pinholes and fisheyes. view less | |
| BYK®-361 N For Powder | BYK | BYK®-361 N For Powder is a polyacrylate used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent compatibility with all powder coating resins. BYK-361 N provides maximum transparency wi...view more BYK®-361 N For Powder is a polyacrylate used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent compatibility with all powder coating resins. BYK-361 N provides maximum transparency with excellent leveling and outstanding performance in long termed exterior exposure conditions.Low viscosity facilitates the ease of incorporation of BYK-361 N. BYK-361 N is also suitable for pigmented systems. view less | |
| BYK®-364 P | BYK | BYK®-364 P is a polyacrylate, adsorbed on silicon dioxide. This product has a polar structure and therefore pigment wetting is generally improved. BYK-364 P, especially in TGIC-alternative powder coating systems, will improve DOI (distinction of image) an...view more BYK®-364 P is a polyacrylate, adsorbed on silicon dioxide. This product has a polar structure and therefore pigment wetting is generally improved. BYK-364 P, especially in TGIC-alternative powder coating systems, will improve DOI (distinction of image) and reduce pinholes at the surface of the coating. BYK-364 P also improves leveling of powder coatings systems and prevents "orange peel“. Additionally, BYK-364 P prevents other surface defects specific to powder coating such as craters and fisheyes. BYK-364 P is an OH-functional additive which can be crosslinked with a suitable binder into the coating system. view less | |
| Efka® 3570 | BASF Formulation Additives | Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion...view more Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion problems. This slightly hazy, yellowish liquid is recommended for use in all kinds of water-based coatings with a pH value > 7.6. view less | |
| WorléeAdd 902 | Worlée-Chemie G.m.b.H. | WorléeAdd 902 is used as a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. W´Add 902 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and e...view more WorléeAdd 902 is used as a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. W´Add 902 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and eliminates pinholes. W´Add 902 is provided as a free flowing powder which is convenient in handling easy to disperse and reliable in performance. view less | |
| WorléeAdd 904 | Worlée-Chemie G.m.b.H. | WorléeAdd 904 is a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. WorléeAdd 904 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and elimi...view more WorléeAdd 904 is a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. WorléeAdd 904 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and eliminates pinholes. This product is provided as a granulate which is convenient in handling and easy to disperse. view less | |
| WorléeAdd 915 | Worlée-Chemie G.m.b.H. | WorléeAdd 915 is a powder coating additive capable of improving mechanical properties of powder coatings and their surface appearance. It can be formulated into powder coating compositions primarily based on acrylics and polyester / GMA 300 hybrids. W´Add...view more WorléeAdd 915 is a powder coating additive capable of improving mechanical properties of powder coatings and their surface appearance. It can be formulated into powder coating compositions primarily based on acrylics and polyester / GMA 300 hybrids. W´Add 915 is a free flowing powder which is convenient in handling, easy to disperse and reliable in performance. view less |
