| 205 | U.S. Zinc | 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...view more 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| 205H | U.S. Zinc | 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...view more 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| 205HSA | U.S. Zinc | 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...view more 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). view less | |
| 205L | U.S. Zinc | 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...view more 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| 205XL | U.S. Zinc | 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....view more 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. view less | |
| 210 | U.S. Zinc | 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...view more 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| 210E | U.S. Zinc | 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...view more 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| 210H | U.S. Zinc | 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...view more 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| 210HSA | U.S. Zinc | 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...view more 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. view less | |
| 210L | U.S. Zinc | 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...view more 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| AZO66 | U.S. Zinc | AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/c...view more AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/coating, ceramic, oil additive industries and in those applications where great purity is dire. Grade AZO66 is available in a pelleted form (AZO66P), in a treated pelleted form (AZO66PT), and with surface treatment (AZO66T). AZO66 has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| AZO66L | U.S. Zinc | AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than norma...view more AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than normal high purity particles. Grade AZO66L is available in a pelleted form (AZO66LP) and with the surface treatment (AZO66LT). AZO66L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. view less | |
| AZO66XL | U.S. Zinc | AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater tha...view more AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater than normal high purity particles. AZO66XL has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. view less | |
| AZO77H | U.S. Zinc | AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those ap...view more AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those applications where high purity and reactivity is required. Grade AZO77H is available with surface treatment (AZO77HT). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). view less | |
| AZO77HSA | U.S. Zinc | AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used...view more AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used in can sealants, latex compounds, zinc chemicals, plastics, paint/coating, and in the food can liner coating industry where the particularly fine particles freely convert certain accessible soluble into white sulfide, thus avoiding discoloration of food from sulfides of tin or iron. AZO77HSA is available with surface treatment (AZO77HSA-T), has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). view less | |
| Zinc Oxide (EGEZinc 112) | EGE Kimya San ve Tic A.S. | Zinc Oxide (EGEZinc 112) is an odorless, inorganic white powder that can be used in paint applications. This product is soluble in acids and alkalines and insoluble in water and alcohol. | |
| Zinc Oxide (EGEZinc 122) | EGE Kimya San ve Tic A.S. | Zinc Oxide (EGEZinc 122) is an odorless, inorganic white powder that can be used in paint applications. This product is soluble in acids and alkalines and insoluble in water and alcohol. | |
| Zinc Oxide, First Grade | Zouping Huiyuan Chemical Co., Ltd. | Zinc Oxide, First Grade, in the form of a white to slightly yellow powder, is a mineral that can be used in coatings and pigments. This product contains less than 0.1% lead oxide and contains less than 0.10% water-soluble material. | |
| Zinc Oxide, Premium Grade | Zouping Huiyuan Chemical Co., Ltd. | Zinc Oxide, Premium Grade, in the form of a white powder, is a mineral that can be used in coatings and pigments. This product contains less than 0.037% lead oxide and contains less than 0.10% water-soluble material. | |
| Zinc Oxide, Qualified Grade | Zouping Huiyuan Chemical Co., Ltd. | Zinc Oxide, Qualified Grade, in the form of a white to slightly yellow powder, is a mineral that can be used in coatings and pigments. This product contains less than 0.14% lead oxide and contains less than 0.15% water-soluble material. | |
| Zinc Oxide (ZnO) Gold Seal High Surface Area NGLD 1015 HSA | Numinor Chemical Industries Ltd. | Zinc Oxide (ZnO) Gold Seal High Surface Area NGLD 1015 HSA is a zinc oxide in the form of a very fine white powder. It has a specific gravity of 5.6 and a maximum Pb percentage of .01. Zinc Oxide (ZnO) Gold Seal High Surface Area NGLD 1015 HSA can be used...view more Zinc Oxide (ZnO) Gold Seal High Surface Area NGLD 1015 HSA is a zinc oxide in the form of a very fine white powder. It has a specific gravity of 5.6 and a maximum Pb percentage of .01. Zinc Oxide (ZnO) Gold Seal High Surface Area NGLD 1015 HSA can be used in paint and coating applications. view less | |
| Zinc Oxide (ZnO) Gold Seal NGLD 1015 | Numinor Chemical Industries Ltd. | Zinc Oxide (ZnO) Gold Seal NGLD 1015 is a zinc oxide in the form of a very fine white powder. It has a specific gravity of 5.6 and a maximum Pb percentage of .002. Zinc Oxide (ZnO) Gold Seal NGLD 1015 can be used in paint and coating applications. | |
| Zinc Oxide (ZnO) Gold Seal NGLD CR-4 FCC 1 | Numinor Chemical Industries Ltd. | Zinc Oxide (ZnO) Gold Seal NGLD CR-4 FCC 1 is a zinc oxide in the form of a very fine, amorphous, white or yellowish powder that is free from gritty particles. It has a specific gravity of 5.6 and a maximum Pb percentage of .001. Zinc Oxide (ZnO) Gold Sea...view more Zinc Oxide (ZnO) Gold Seal NGLD CR-4 FCC 1 is a zinc oxide in the form of a very fine, amorphous, white or yellowish powder that is free from gritty particles. It has a specific gravity of 5.6 and a maximum Pb percentage of .001. Zinc Oxide (ZnO) Gold Seal NGLD CR-4 FCC 1 can be used in paint and coating applications. view less | |
| Zinc Oxide (ZnO) Gold Seal NGLD CR-4 FCC 5 | Numinor Chemical Industries Ltd. | Zinc Oxide (ZnO) Gold Seal NGLD CR-4 FCC 5 is a zinc oxide in the form of a very fine, amorphous, white or yellowish powder that is free from gritty particles. It has a specific gravity of 5.6 and a maximum Pb percentage of .0005. Zinc Oxide (ZnO) Gold Se...view more Zinc Oxide (ZnO) Gold Seal NGLD CR-4 FCC 5 is a zinc oxide in the form of a very fine, amorphous, white or yellowish powder that is free from gritty particles. It has a specific gravity of 5.6 and a maximum Pb percentage of .0005. Zinc Oxide (ZnO) Gold Seal NGLD CR-4 FCC 5 can be used in paint and coating applications. view less | |
| Zinc Oxide (ZnO) Gold Seal NGLD CR-4 USP 1 | Numinor Chemical Industries Ltd. | Zinc Oxide (ZnO) Gold Seal NGLD CR-4 USP 1 is a zinc oxide in the form of a very fine, amorphous, white or yellowish powder that is free from gritty particles. It has a specific gravity of 5.6 and a maximum Pb percentage of .001. Zinc Oxide (ZnO) Gold Sea...view more Zinc Oxide (ZnO) Gold Seal NGLD CR-4 USP 1 is a zinc oxide in the form of a very fine, amorphous, white or yellowish powder that is free from gritty particles. It has a specific gravity of 5.6 and a maximum Pb percentage of .001. Zinc Oxide (ZnO) Gold Seal NGLD CR-4 USP 1 can be used in paint and coating applications. view less | |
| Zinc Oxide (ZnO) Gold Seal NGLD CR-4 USP 5 | Numinor Chemical Industries Ltd. | Zinc Oxide (ZnO) Gold Seal NGLD CR-4 USP 5 is a zinc oxide in the form of a very fine, amorphous, white or yellowish powder that is free from gritty particles. It has a specific gravity of 5.6 and a maximum Pb percentage of .0005. Zinc Oxide (ZnO) Gold Se...view more Zinc Oxide (ZnO) Gold Seal NGLD CR-4 USP 5 is a zinc oxide in the form of a very fine, amorphous, white or yellowish powder that is free from gritty particles. It has a specific gravity of 5.6 and a maximum Pb percentage of .0005. Zinc Oxide (ZnO) Gold Seal NGLD CR-4 USP 5 can be used in paint and coating applications. view less | |
| Zinc Oxide (ZnO) White Seal NRS 1010 | Numinor Chemical Industries Ltd. | Zinc Oxide (ZnO) White Seal NRS 1010 is a zinc oxide in the form of a very fine white powder. It has a surface area of 3.5 to 6.5 and a maximum Pb percentage of .18. Zinc Oxide (ZnO) White Seal NRS 1010 can be used in paint and coating applications. | |
| Zinc Oxide (ZnO) White Seal NWS 1010 | Numinor Chemical Industries Ltd. | Zinc Oxide (ZnO) White Seal NWS 1010 is a zinc oxide in the form of a very fine white powder. It has a surface area of 3.5 to 6.5 and a maximum Pb percentage of .1. Zinc Oxide (ZnO) White Seal NWS 1010 can be used in paint and coating applications. | |
| Zinc Powder, First Class | Zouping Huiyuan Chemical Co., Ltd. | Zinc Powder, First Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 d...view more Zinc Powder, First Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 degrees Celsius. It is insoluble in water but soluble in acid and alkaline conditions. view less | |
| Zinc Powder, Fourth Class | Zouping Huiyuan Chemical Co., Ltd. | Zinc Powder, Fourth Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 ...view more Zinc Powder, Fourth Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 degrees Celsius. It is insoluble in water but soluble in acid and alkaline conditions. view less | |
| Zinc Powder, Second Class | Zouping Huiyuan Chemical Co., Ltd. | Zinc Powder, Second Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 ...view more Zinc Powder, Second Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 degrees Celsius. It is insoluble in water but soluble in acid and alkaline conditions. view less | |
| Zinc Powder, Third Class | Zouping Huiyuan Chemical Co., Ltd. | Zinc Powder, Third Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 d...view more Zinc Powder, Third Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 degrees Celsius. It is insoluble in water but soluble in acid and alkaline conditions. view less | |
| ZNO Grade 400 | Zinc Oxide LLC | ZNO Grade 400 is manufactured by French (Indirect) Process with medium surface area, high assay and moderate impurities. This grade is widely used in the tire and rubber, paint and coatings, and all applications requiring an FDA approved substance. | |
| ZNO Grade 400H | Zinc Oxide LLC | ZNO Grade 400H is manufactured by French (Indirect) Process with slightly higher surface area, high assay and moderate impurities. This grade is used where increased zinc oxide re-activity provides benefits in the application, such as certain zinc chemica...view more ZNO Grade 400H is manufactured by French (Indirect) Process with slightly higher surface area, high assay and moderate impurities. This grade is used where increased zinc oxide re-activity provides benefits in the application, such as certain zinc chemicals may require less reactor time, or the end product may have improved clarity or color. view less | |
| ZNO Grade 400HSA | Zinc Oxide LLC | ZNO Grade 400HSA is manufactured by French (Indirect) Process with very high surface area, high assay and moderate impurities. This grade is used where increased zinc oxide re-activity provides benefits in the application, such as certain zinc chemicals m...view more ZNO Grade 400HSA is manufactured by French (Indirect) Process with very high surface area, high assay and moderate impurities. This grade is used where increased zinc oxide re-activity provides benefits in the application, such as certain zinc chemicals may require less reactor time, or the end product may have improved clarity or color. view less | |
| ZNO Grade 400L | Zinc Oxide LLC | ZNO Grade 400L is manufactured by French (Indirect) Process with lower surface area, high assay and moderate impurities. This grade is used where slightly less reactivity provides benefits in the application, such as in paint and coatings to reduce potent...view more ZNO Grade 400L is manufactured by French (Indirect) Process with lower surface area, high assay and moderate impurities. This grade is used where slightly less reactivity provides benefits in the application, such as in paint and coatings to reduce potential gelling/early shelf life failures due the zinc oxide undesirably reacting with dispersants or TiO2 coatings. view less | |
| ZNO Grade 500 | Zinc Oxide LLC | ZNO Grade 500 is manufactured by French (Indirect) Process with medium surface area, high assay and low impurities. ZNO Grade 500 meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Dir...view more ZNO Grade 500 is manufactured by French (Indirect) Process with medium surface area, high assay and low impurities. ZNO Grade 500 meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and is used in the tire and rubber, paint and coatings, and all applications except when a special product is requested or required. view less | |
| ZNO Grade 500H | Zinc Oxide LLC | ZNO Grade 500H is manufactured by French (Indirect) Process with slightly higher surface area, high assay and low impurities. ZNO Grade 500H meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicl...view more ZNO Grade 500H is manufactured by French (Indirect) Process with slightly higher surface area, high assay and low impurities. ZNO Grade 500H meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and increased zinc oxide reactivity provides benefits in the application, such as certain zinc chemicals may require less reactor time, or the end product may have improved clarity or color. view less | |
| ZNO Grade 500HSA | Zinc Oxide LLC | ZNO Grade 500HSA is manufactured by French (Indirect) Process with very high surface area, high assay and low impurities. ZNO Grade 500HSA meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles...view more ZNO Grade 500HSA is manufactured by French (Indirect) Process with very high surface area, high assay and low impurities. ZNO Grade 500HSA meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and increased zinc oxide re-activity provides application benefits. view less | |
| ZNO Grade 500L | Zinc Oxide LLC | ZNO Grade 500L is manufactured by French (Indirect) Process with lower surface area, high assay and low impurities. ZNO Grade 500L meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Di...view more ZNO Grade 500L is manufactured by French (Indirect) Process with lower surface area, high assay and low impurities. ZNO Grade 500L meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and slightly less re-activity provides benefits in the application, such as in paint and coatings to reduce potential gelling/early shelf life failures due the zinc oxide undesirably reacting with dispersants or TiO2 coatings. This grade is also used in ceramics and electronics . view less | |
| ZNO Grade 500XL | Zinc Oxide LLC | ZNO Grade 500XL is manufactured by French (Indirect) Process with large particle, low surface area, high assay and low impurities. This grade is used where low impurities are required and large particle zinc oxide provides benefits in the application, suc...view more ZNO Grade 500XL is manufactured by French (Indirect) Process with large particle, low surface area, high assay and low impurities. This grade is used where low impurities are required and large particle zinc oxide provides benefits in the application, such as in paint and coatings, ceramics, soft ferrites and varistors. view less | |
| ZNO Grade 800 | Zinc Oxide LLC | ZNO Grade 800 is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with medium surface area, high assay and very low impurities. This grade is used where lower impurities are required and is used in the tire and rubb...view more ZNO Grade 800 is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with medium surface area, high assay and very low impurities. This grade is used where lower impurities are required and is used in the tire and rubber, paint and coatings, and all applications except when a special product is requested or required. view less | |
| ZNO Grade 800H | Zinc Oxide LLC | ZNO Grade 800H is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a higher surface area, high assay and very low impurities. This grade is used where lower impurities are required and increased zinc oxide reac...view more ZNO Grade 800H is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a higher surface area, high assay and very low impurities. This grade is used where lower impurities are required and increased zinc oxide reactivity provides benefits in certain zinc chemicals applications. view less | |
| ZNO Grade 800HSA | Zinc Oxide LLC | ZNO Grade 800HSA is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a higher surface area, high assay and very low impurities. This grade is used where very low impurities are required and increased zinc oxide...view more ZNO Grade 800HSA is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a higher surface area, high assay and very low impurities. This grade is used where very low impurities are required and increased zinc oxide reactivity provides application benefits. view less | |
| ZNO Grade 800L | Zinc Oxide LLC | ZNO Grade 800L is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a slightly lower surface area, high assay and very low impurities. This grade is used where very low impurities are required and slightly less ...view more ZNO Grade 800L is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a slightly lower surface area, high assay and very low impurities. This grade is used where very low impurities are required and slightly less re-activity provides benefits in the application, such as in paint and coatings to reduce potential gelling/early shelf life failures due the zinc oxide undesirably reacting with dispersants or TiO2 coatings. This grade is also used in ceramics. view less | |
| ZNO Grade 800XL | Zinc Oxide LLC | ZNO Grade 800XL is manufactured by French (Indirect) Process with large particle, low surface area, high assay, and very low impurities. This grade is used where very low impurities are required and large particle zinc oxide provides benefits in the appli...view more ZNO Grade 800XL is manufactured by French (Indirect) Process with large particle, low surface area, high assay, and very low impurities. This grade is used where very low impurities are required and large particle zinc oxide provides benefits in the application, such as in paint and coatings, ceramics, soft ferrites and varistors. view less | |
| ZNO Grade USP10 | Zinc Oxide LLC | ZNO Grade USP10 grade is manufactured by ZNO to the most stringent quality standards in the world for manufacturing pharmaceutical drug product. ZNO Grade 400 meets GRAS (Generally Recognized As Safe) USFDA Pharma standards for use as an ingredient for fo...view more ZNO Grade USP10 grade is manufactured by ZNO to the most stringent quality standards in the world for manufacturing pharmaceutical drug product. ZNO Grade 400 meets GRAS (Generally Recognized As Safe) USFDA Pharma standards for use as an ingredient for food contact in rubber, plastics, food can lining coatings, etc.Use ZNO Grade 400 wherever use of an FDA approved grade is required. view less |
