| POLYCAT® DBU | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® DBU is a strong gel catalyst that provides snap cure at ambient temperature. | |
| POLYCAT® SA 1/10 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 1/10 is an acid-free heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. | |
| POLYCAT® SA 2 LE | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 2 LE is a low emission heat activated catalyst that exhibits a front end delay with rapid back end-cure. | |
| POLYCAT® SA 20 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 20 is a DBT-free low emission gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. | |
| POLYCAT® SA 4 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 4 is a heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. Is has higher de-blocking temperature and longer pot life time than POLYCAT® SA 1/10. | |
| POLYCAT® SA 5 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 5 is a gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It is recommended to use in conjunction with DABCO® BA 100 to improve pot life time. | |
| POLYCAT® SA 8 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 8 is a heat activated co-catalyst with an excellent front-end delay. | |
| Polyslip™ VM 70 E | Lawter | Polyslip™ VM 70 E is a solvent-based wax dispersion consisting of a combination of carnauba wax in solvent "150" and isopropanol. It has good slip, scratch resistance and leveling properties and does not lose gloss. The product is used as a lubricant in v...view more Polyslip™ VM 70 E is a solvent-based wax dispersion consisting of a combination of carnauba wax in solvent "150" and isopropanol. It has good slip, scratch resistance and leveling properties and does not lose gloss. The product is used as a lubricant in various applications including 2-piece whites and clear coats, solvent borne coatings, lacquers and varnishes. view less | |
| Polyslip™ VS 86 E | Lawter | Polyslip™ VS 86 E is a solvent-based wax dispersion consisting of a combination of solvents like pine oil, solvent "150", methoxypropanol and n-butanol. It is used as a lubricant, offering good slip and scratch resistance with gloss retention and leveling...view more Polyslip™ VS 86 E is a solvent-based wax dispersion consisting of a combination of solvents like pine oil, solvent "150", methoxypropanol and n-butanol. It is used as a lubricant, offering good slip and scratch resistance with gloss retention and leveling as added features. The product is used in solvent borne can coatings, internal lacquers, 2-piece white and clear coats and finishing varnishes. view less | |
| Polysperse™ E | Lawter | Polysperse™ E is a micronized synthetic wax that has good rub and scuff resistance properties along with ideal surface slip, gloss and low surface tension. It is used in all printing inks including gravure, offset, screen inks and coatings and varnishes. ...view more Polysperse™ E is a micronized synthetic wax that has good rub and scuff resistance properties along with ideal surface slip, gloss and low surface tension. It is used in all printing inks including gravure, offset, screen inks and coatings and varnishes. The product also has uses in sheet-fed, heatset and offset inks. view less | |
| Release K 100 D DIL. 1 ECO | Ichemco | Release K 100 D DIL. 1 ECO is a polyurethane release agent in an octane and isopropyl alcohol solvent solution. This product has a total solids content of 0.5-1.5%. Release K 100 D DIL. 1 ECO is most commonly used as a release agent in PP, PE, PVC, and po...view more Release K 100 D DIL. 1 ECO is a polyurethane release agent in an octane and isopropyl alcohol solvent solution. This product has a total solids content of 0.5-1.5%. Release K 100 D DIL. 1 ECO is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. view less | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...view more Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| Resiflow® LG-99 | Estron Chemical, Inc. | Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based...view more Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resiflow® PL-200B | Estron Chemical, Inc. | Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performa...view more Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. view less | |
| SIRION® VP 2080 | SIR Industriale SpA | SIRION® VP 2080 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a polyacrylate flow modifier and curing accelerator, has good flow, and moderate reactivity. This product is well suited for use i...view more SIRION® VP 2080 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It contains a polyacrylate flow modifier and curing accelerator, has good flow, and moderate reactivity. This product is well suited for use in protective and high gloss powder coating. view less | |
| STRUKTOSIL 45 MAM | Hoffmann Mineral | STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, rel...view more STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, released by-products are removed as far as possible during production. Undesirable byproducts, such as occur during in situ mixings (i.e. during the direct addition of the additives), are therefore practically completely prevented and the material improves its hydrophobic properties. view less | |
| Sunmide® 307D-60 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Sunmide® 307D-60 Curing Agent is a polyamide amine in xylene and n-butanol. It displays very good thixotropic properties. It is most commonly used for fast cure and fast dry applications for industrial epoxy coatings. | Request Sample |
| TEGO® Foamex 11 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints. | Request Sample |
| TEGO® Therm L 300 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm L 300 is a hybrid polysiloxane dispersion. | Request Sample |
| TEGOSTAB® B 8900 | Evonik Operations GmbH, BL Comfort & Insulation | TEGOSTAB® B 8900 is a silicone-based surfactant with strong cell-opening and degassing properties. | |
| Thickener PU 3 | Ichemco | Thickener PU 3 is a sodium polyacrylate thickener. This product has a Brookfield viscosity at 25°C of 23,000-33,000 mPa.s. Thickener PU 3 is most commonly used as a thickening agent in synthetic latex paint formulation applications. | |
| Tohmide 215-X | Sanho Chemical Co., Ltd. | Tohmide 215-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Tohmide 215-X is most commonly used in coating formulation applications. | |
| Tohmide 275 | Sanho Chemical Co., Ltd. | Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive for...view more Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive formulation applications. view less | |
| Wetting Agent 62 | Ichemco | Wetting Agent 62 is a water and ethanol solution containing surfactants. This product is most commonly used to decrease blemishes such as fish-eyes in coating production applications. | |
| WorléeFen F 130 | Worlée-Chemie G.m.b.H. | WorléeFen F 130 is a high melting point phenolic modified hard resin for cold cut of alkyds and drying oils. It improves the gloss and film surface hardness of paints and varnishes. W´Fen F 130 is compatible with drying short, medium and long oil alkyds. ...view more WorléeFen F 130 is a high melting point phenolic modified hard resin for cold cut of alkyds and drying oils. It improves the gloss and film surface hardness of paints and varnishes. W´Fen F 130 is compatible with drying short, medium and long oil alkyds. It is also well compatible with drying oils. view less |
