| Polytone PA 302 | Polyols and Polymers | Polytone PA 302 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also pr...view more Polytone PA 302 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also provides a glossy finish. This product provides adhesion to treated polyethylene and other plastics. Polytone PA 302 is primarily used for flexographic and gravure printing inks.Polytone PA 302 is compatible with ketonic, maleic, reduced phenolic and pure phenolic resins. However,compatibility with alkyds is only partial. view less | |
| HALOX® Z-Plex 250 | ICL Phosphate Specialty | HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It ...view more HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It shows a high degree of versatility due to its narrow particle size distribution. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 250 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended dosage level is 5-10% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| SCHWEGO® Foam 6377 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also su...view more SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also suitable in epoxy, PUR- and acrylate systems. Effective deaeration is required for smooth film formation. Trapped air, pinholes can cause dirt retention and difficulties when topcoating and polishing. Apart from these surface defects frequently a reduction in gloss and a deterioration in water resistance are observed. SCHWEGO® foam 6377 produces intensive defoaming and strongly reduces bubbles. Also, the even formation of the wax layer with unsaturated polyesters is promoted. SCHWEGO® foam 6377 is effective in wax containing as well as in wax free systems. view less | |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety ...view more HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| Pliodisp® 7730 | Omnova Solutions | Pliodisp® 7730 is an aqueous copolymer emulsion based on an acrylic acid ester and modified with styrene. It is stabilized with emulsifiers and is designed as a binder for elastomeric wall and roof coatings. Pliodisp® 7730 aids in the formulation of imper...view more Pliodisp® 7730 is an aqueous copolymer emulsion based on an acrylic acid ester and modified with styrene. It is stabilized with emulsifiers and is designed as a binder for elastomeric wall and roof coatings. Pliodisp® 7730 aids in the formulation of impermeable coatings with excellent aging behavior. It also shows a high elongation at break down to negative temperatures. Films of Pliodisp® 7730 exhibit low water uptake and high saponification resistance. Because Pliodisp® 7730 has both internal and radiation curing cross-linking systems, tack and dirt pick-up are significantly reduced. Products formed with Pliodisp® 7730 have an initial low tack. view less | |
| ANTI-TERRA®-204 | BYK | ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixot...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less | |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...view more HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| CRAYVALLAC® A-2678-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film forma...view more CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film formation. The following benefits are to be gained by using CRAYVALLAC® A-2678-M in water based coatings: Enhanced substrate wetting and coating leveling, Reduced craters, fisheyes and pinhole. The results of these enhancements are smoother films with fewer imperfections and a superior overall appearance (measurable with glow and DOI) when compared with the unmodified coating. view less | Request Sample |
| PAT-ADD LE 1030 | Patcham LTD | PAT-ADD LE 1030 is a levelling agent for use in waterborne and polar solvent-borne coatings PAT-ADD LE 1030 is mainly used in industrial coatings. PAT-ADD LE 1030 enhances flow and levelling, substrate wetting and air release. Main benefits are: first cho...view more PAT-ADD LE 1030 is a levelling agent for use in waterborne and polar solvent-borne coatings PAT-ADD LE 1030 is mainly used in industrial coatings. PAT-ADD LE 1030 enhances flow and levelling, substrate wetting and air release. Main benefits are: first choice for PUR systems, excellent substrate wetting and air release, effective leveling agent for water borne and polar solvent systems, wide range of compatibilty, strong surface tension reduction, reduces risk of pigment float, and effective in PUR, acrylic and polyester melamine industrial paints. view less | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate sy...view more BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate systems. Complete de-aerating is a requirement for an excellent film formation. Trapped air, pinholes can cause dirt retention and difficulties, when topcoating and polishing. Apart from these surface defects, frequently reductions in gloss and deterioration of water resistance are observed. This product reduces considerably the formation of blisters and causes intensive de-aerating and the uniform formation of the waxlayer with unsaturated polyesters. view less | |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...view more K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. view less | |
| HALOX® CZ-170 | ICL Phosphate Specialty | HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective repl...view more HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective replacement for zinc oxide. It can also be used in high gloss (+75 gloss units at 60°) and thin film (<1.0 mils or 25 microns) applications, due to its finer mean particle size and narrow particle size distribution. It is suitable for water-based epoxy esters, short-, medium- & long oil alkyd, and solvent-based water-reducible alkyds, alkyd dispersions, and acrylics. HALOX® CZ-170 can be used in specific systems that protect metal and wood substrates. It is also used in powder coatings and wash & etch primers. The dosage level for multi-substrate water-based systems is 2-5% by total formula weight and 0.5-2% for high gloss & thin film coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...view more HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced perfor...view more HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alk...view more HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. view less | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| LYNDCOAT 15 RTU | Elkem Silicones | LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RT...view more LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RTU also helps keep molds and vents clean, reducing defects and downtime. Lyndcoat™ 15 RTU typically is durable through multiple production cycles. The need for reapplication is dependent on factors such as the rubber compound, curing time, curing temperature, tread design and application technique. Lyndcoat™ 15 RTU is designed for processes requiring low viscosity mold lubricants. view less | |
| POLYRON® 322 New | ICL Phosphate Specialty | POLYRON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size is rapidly...view more POLYRON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size is rapidly achieved. This product is best suitable as a dispersing agent for waterborne paints, especially emulsion paints. It slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium- and heavy metal ions. This product deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N | ICL Phosphate Specialty | CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON®...view more CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890, and due to its high dispersing effectivity, optimal particle size is rapidly achieved. This product is suitable as a dispersing agent for waterborne paints, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| Deuteron OG 250 | Deuteron | Deuteron OG 250 affects the surface characteristics of aqueous coating systems. The low melting point of the used paraffine-wax reduces unwelcome high slipperiness of certain binders (dispersions). Because of this property the product is also suitable ...view more Deuteron OG 250 affects the surface characteristics of aqueous coating systems. The low melting point of the used paraffine-wax reduces unwelcome high slipperiness of certain binders (dispersions). Because of this property the product is also suitable as an additive to produce water-based „soft-feeling-lacquers“. On the other hand the use of Deuteron OG 250 can increase the slipperiness of coatings, when the properties imparted by the used binder are not satisfactory. Applications include aqueous finishing lacquers, packing lacquers, printing inks and aqueous wood stains. Also ideal for use in "soft-feeling-lacquers“ for industrial application (combined with matting plastic deuteron MK). view less | Request Sample |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| K-FLEX® XM-B301 | King Industries, Inc. | K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...view more K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. view less | |
| Deuteron XG | Deuteron | The use of Deuteron XG in aqueous systems, such as emulsion paints and plasters, prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is co...view more The use of Deuteron XG in aqueous systems, such as emulsion paints and plasters, prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry. Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 - 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG. It is ideal for all aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. view less | Request Sample |
| CALGON® 322 New | ICL Phosphate Specialty | CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 8...view more CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size is rapidly achieved and it is best suited as a dispersing agent for waterborne paints, especially emulsion paints. It also slows down sedimentation reduces water hardness and offers a good binding capacity with regard to calcium- and heavy metal ions. This product deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CoatForce® CF30 | Lapinus Fibres BV | CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various pain...view more CoatForce® CF30 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF30 gives excellent mechanical properties to various paint and coating systems. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| Polytone PA 303 | Polyols and Polymers | Polytone PA 303 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also pr...view more Polytone PA 303 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also provides a glossy finish. This product provides adhesion to treated polyethylene and other plastics. Polytone PA 303 is primarily used for flexographic and gravure printing inks. Polytone PA 303 is compatible with ketonic, maleic, reduced phenolic and pure phenolic resins. However,compatibility with alkyds is only partial. Compatibility of Polytone PA 303 with nitrocellulose is much improved as compared to that of & Polytone PA 302 view less | |
| Ecodis™ NP | Arkema Rheology & Specialty Additives | Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders and inorganic pigments. It enables to achieve mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating too...view more Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders and inorganic pigments. It enables to achieve mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating tools. Ecodis™ NP is particularly adapted for the dispersion of fine calcium carbonates, clays and high value pigments such at titanium dioxide across a wide range of water based formulations. It ensures a very good storage stability even to formulations stored a long time at higher temperature, which is not the case of inorganic additives such as phosphate based dispersants. Ecodis™ NP contributes to reduce formulation costs thanks to its view less | Request Sample |
| Siltech® C-20 | Siltech Corp. | Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less syste...view more Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less systems. It effectively reduces surface tension and provides mar resistance or slip finishes. It also provides other benefits such as leveling, wetting, flow-out and aids pigment dispersion. It is effective at low concentrations. The recommended concentration used is between-% weight percent based on total solids. It should be added during the final thinning step. Preliminary tests in laboratory or a small-scale production unit necessary to obtain optimum results. view less | |
| Hauthane HD-4664 | Hauthaway | Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart grea...view more Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart greater film flexibility. A balanced composition provides good stability with acrylic latices and confers superior strength, abrasion resistance and low temperature flexibility properties. HD-4664 can be used as a sole vehicle or blended with acrylic emulsions for spray or pad bath applications. Solids can be reduced with water to optimize dry coating weight. This product may also be thickened with associative thickeners for knife-over-roll or similar methods. view less | |
| SiSiB® PC6110 | SiSiB SILICONES | SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymer...view more SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers, leading to a better dispersibility, reduced melt viscosity and easier processing of filled plastics; for the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; in sealants; or for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating. view less | |
| Pangel FF | Tolsa SA | Pangel® FF by Tolsa is a rheological additive for aqueous systems. It acts as an anti-sagging- and anti-slipping agent. It provides workability, pumpability, thixotropy, and pseudoplastic properties, improving stability, suspension & application. It contr...view more Pangel® FF by Tolsa is a rheological additive for aqueous systems. It acts as an anti-sagging- and anti-slipping agent. It provides workability, pumpability, thixotropy, and pseudoplastic properties, improving stability, suspension & application. It controls system flow and consistency, ensuring optimal distribution of solvents, fillers & other components. It avoids both slipping & mortar sagging, reduces bleed & segregation during the application, and provides augmented density to the better handled. It helps improve adherence to the substrate and furnish better texturing & surface finishing properties. It is suitable for water-based paints and foundry coatings. The recommended dosage level is between 2-5%. Pangel® FF has a shelf life of 1 year. view less | |
| Pangel FG | Tolsa SA | Pangel® FG by Tolsa is a rheological additive for aqueous systems. It acts as an anti-sagging- and anti-slipping agent. It provides workability, pumpability, thixotropy, and pseudoplastic properties, improving stability, suspension & application. It contr...view more Pangel® FG by Tolsa is a rheological additive for aqueous systems. It acts as an anti-sagging- and anti-slipping agent. It provides workability, pumpability, thixotropy, and pseudoplastic properties, improving stability, suspension & application. It controls system flow and consistency, ensuring optimal distribution of solvents, fillers & other components. It avoids both slipping & mortar sagging, reduces bleed & segregation during the application, and provides augmented density to the better handled. It helps improve adherence to the substrate and furnish better texturing & surface finishing properties. It is suitable for water-based paints and foundry coatings. The recommended dosage level is between 2-5%. Pangel® FF has a shelf life of 1 year. view less | |
| LYNDCOAT MR 5100 RTU | Elkem Silicones | LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessin...view more LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessing excellent release and lubrication properties towards rubber. LYNDCOAT MR 5100 RTU helps keep moulds and vents clean, which reduces defects and downtime. LYNDCOAT MR 5100 RTU is durable through multiple production cycles. The need for reapplication is dependent on factors such as: the rubber compound, tread design, curing time, curing temperature, application technique and press type. LYNDCOAT MR 5100 RTU is designed for processes requiring low viscosity mould lubricants. view less | |
| CALGON® N New | ICL Phosphate Specialty | CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability wh...view more CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability when applied in combination with polyacrylates like LOPON® 800, and due to its high dispersing effectivity, optimal particle size of the pigment slurry is rapidly achieved. This product is suitable as a dispersing agent for emulsion paints and plasters, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions to achieve high solid contents of emulsion paints with low viscosity. view less | Request Sample |
| CoatForce® CF10 | Lapinus Fibres BV | CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. Th...view more CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. The off-white colour makes it especially suitable for decorative applications. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| Polyglykol AM 1100 | Clariant International Ltd. | Polyglykol AM 1100 is a waxy solid with weak odor. Like other polyethylene glycol allyl methyl ethers it is hydrophilic and biodegradable. Additional advantages include its compatibility with many materials, high heat resistance and low toxicity. With its...view more Polyglykol AM 1100 is a waxy solid with weak odor. Like other polyethylene glycol allyl methyl ethers it is hydrophilic and biodegradable. Additional advantages include its compatibility with many materials, high heat resistance and low toxicity. With its allyl group Polyglycol AM 1100 has the necessary requirement for many different chemical reactions. Additional reactions with silyl compounds can be carried out very easily, and under certain conditions other radical reactions or radical polymerizations are also possible. In this way, agrochemicals, plastics in the construction industry and other polymers can be given the properties of polyethylene glycol, particularly hydrophilic properties right through to water solubility. Applications in this area include paint additives, PU foam stabilization, manufacture of water-soluble or water-dispersible paints, silicone chemistry and hydrophilic modification of polymers in general. Other applications include their use in combination with nitrites for corrosion protection (as an additive to hydraulic cement and cement for steel-reinforced concrete), and in paper bleaching (as a delignifying agent). This product is also available as Polyglykol AM 1100, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 91.5% . view less | |
| POLYRON® N New | ICL Phosphate Specialty | POLYRON® N New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. This product is easily soluble since it is agglomerated. It improves the storage stability when appli...view more POLYRON® N New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. This product is easily soluble since it is agglomerated. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size of the pigment slurry is rapidly achieved, and it is well suitable as dispersing agent for emulsion paints and plasters. This product also slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. The usual dosage of POLYRON® N new in formulation is 0.05 – 0.15 %. view less | Request Sample |
| CoatForce® CF50 | Lapinus Fibres BV | CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various p...view more CoatForce® CF50 is a high quality engineered mineral fibre. Its fibre length results in dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF50 gives mechanical properties and rheological behavior to various paint and coating systems. CoatForce® CF50 has an off-white colour and very low shot content. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. view less | |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influen...view more Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF60W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 60um. view less | |
| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influ...view more Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF200W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 200um. view less | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influ...view more Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF300W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 300um. view less | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influ...view more Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. view less | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influ...view more Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF500W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 500um. view less | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influ...view more Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF800W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 800um. view less | |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phos...view more HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. view less | Request Sample |
| Dynasylan® 6498 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colourless, nearly odorless low viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. k...view more Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colourless, nearly odorless low viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6498, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis ethanol (VOC) is significantly reduced compared to monomeric vinyl silanes. view less | |
| Polyglykol M 500 | Clariant International Ltd. | Polyglykol M 500 is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has a mol...view more Polyglykol M 500 is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has a molecular weight of 470 – 530g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 500 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI > 95.4%. view less | |
| Viscalex® VG2 | BASF Formulation Additives | Viscalex® VG2 is an effective rheological control agent for water-borne systems. It is designed to improve the Newtonian rheological properties over a wide shear rate interval without exhibiting any significant thixotropic effect. Thus, Viscalex® VG2 allo...view more Viscalex® VG2 is an effective rheological control agent for water-borne systems. It is designed to improve the Newtonian rheological properties over a wide shear rate interval without exhibiting any significant thixotropic effect. Thus, Viscalex® VG2 allows formulation of high gloss paint systems with optimal flow properties for manual application techniques. This white liquid is a formulation based on an acrylic copolymer. Typical end-use applications include: glossy emulsion paints for household paints and glossy, low duty industrial paints. Since Viscalex® VG2 is a synthetically derived product it is less susceptible to microbiological attack than derivatives of cellulose. Consequently the paint formulator can substantially reduce the level of biocide leading to a broader area of application. Viscalex® VG2 is most effective over the pH range 7.5 – 10.5. view less | |
| Polyglykol 8000 FL | Clariant International Ltd. | Polyglykol 8000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...view more Polyglykol 8000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 8000 FL can be supplied in heated tank trucks, and it has a molecular weight of 7300 – 9000g/mol. This product is also available as Polyglykol 8000 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. view less | |
| DICAP® 2020 Acid Functional Saturated Polyester Polyol | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DICAP® 2020 Acid Functional Saturated Polyester Polyol is a linear saturated polyester diol with a pendant carboxylic functional group. The OH terminated polyester chains are DMPA® Dimethylolpropionic acid initiated polycaprolactone. The combination of bo...view more DICAP® 2020 Acid Functional Saturated Polyester Polyol is a linear saturated polyester diol with a pendant carboxylic functional group. The OH terminated polyester chains are DMPA® Dimethylolpropionic acid initiated polycaprolactone. The combination of both hydroxyl and carboxyl functionality produces unique benefits and versatility. The acid group promotes water dispersability of the resin after neutralisation with a base or can improve adhesion to difficult substrates. This product has a melting point (DSC) of 59.3°C, a non-volatile content of 99% wt. min., a viscosity @ 60°C of 800-1000cP, and an acid equivalent weight of 935-1122g/eqv. Since no DMPA is required to formulate water dispersible pre-polymers, NMP may be reduced or eliminated from the formulations. Pre-polymers formulated with DICAP® products have very good solubility in monomers for hybrid applications and in acetone for solvent-free PUDs. Depending on the molecular weight of the DICAP® polyol and the formulating technique, hard films can be formulated for durable coatings or soft urethane polymers can be formulated for coating textiles and leathers. DICAP® products can be used in compliance with 21CFR 175.105 for indirect contact with food. view less | |
| Polyglykol 1500 FL | Clariant International Ltd. | Polyglykol 1500 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceu...view more Polyglykol 1500 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL can be supplied in heated tank trucks. This product is also available as Polyglykol 1500 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. view less | |
| Polyglykol 400 | Clariant International Ltd. | Polyglykol 400 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutica...view more Polyglykol 400 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 400 displays typical chemical reactions of alcohols/diols, and it has a molecular weight of 380 – 420g/mol. This product is also available as Polyglykol 400 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. view less | |
| Polyglykol 600 | Clariant International Ltd. | Polyglykol 600 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutica...view more Polyglykol 600 is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 600 is a viscous liquid at room temperature, and it has a molecular weight of 570 – 630g/mol. This product is also available as Polyglykol 600 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. view less | |
| Polyglykol M 350 | Clariant International Ltd. | Polyglykol M 350 is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 can be considered as high mo...view more Polyglykol M 350 is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 350 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 91.3%. view less | |
| Polyglykol M 750 | Clariant International Ltd. | Polyglykol M 750 is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 can be considered as high molecular alcohol and therefore displays typical chem...view more Polyglykol M 750 is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. It has a molecular weight of 720 – 780g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 750 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 96.9%. view less | |
| Polyglykol M 2000 FL | Clariant International Ltd. | Polyglykol M 2000 FL is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as melt supplie...view more Polyglykol M 2000 FL is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as melt supplied in a heated tank truck. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 2000 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 98.7%. view less | |
| Deuteron ST-L | Deuteron | Deuteron ST-L texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...view more Deuteron ST-L texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Deuteron ST | Deuteron | Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and op...view more Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Deuteron ST-S | Deuteron | Deuteron ST-S texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...view more Deuteron ST-S texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Deuteron ST-G | Deuteron | Deuteron ST-G texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...view more Deuteron ST-G texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Deuteron ST-M | Deuteron | Deuteron ST-M texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...view more Deuteron ST-M texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Aspanger ASPOLIT F30 | Aspanger | Aspanger ASPOLIT F30, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...view more Aspanger ASPOLIT F30, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F30 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F30 has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 400. view less | |
| Aspanger ASPOLIT F40 | Aspanger | Aspanger ASPOLIT F40, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...view more Aspanger ASPOLIT F40, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F40 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F40 has a Spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 35, and a loose bulk density (g/l) of 450. view less | |
| Aspanger ASPOLIT F70 | Aspanger | Aspanger ASPOLIT F70, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...view more Aspanger ASPOLIT F70, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F70 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F70 has a Spec. surface (m²/g) of 6, an a oil absorption (g/100 g) of 27, and a loose bulk density (g/l) of 540. view less | |
| Aspanger ASPOLIT F100 | Aspanger | Aspanger ASPOLIT F100, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...view more Aspanger ASPOLIT F100, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F100 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F100 has a Spec. surface (m²/g) of 4.5, an a oil absorption (g/100 g) of 21, and a loose bulk density (g/l) of 630. view less | |
| Aspanger ASPOLIT G200 | Aspanger | Aspanger ASPOLIT G200, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...view more Aspanger ASPOLIT G200, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT G200 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT G200 has a Spec. surface (m²/g) of 3, an a oil absorption (g/100 g) of 16, and a loose bulk density (g/l) of 740. view less | |
| Aspanger ASPOLIT G400 | Aspanger | Aspanger ASPOLIT G400, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...view more Aspanger ASPOLIT G400, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT G400 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT G400 has a spec. surface (m²/g) of 1-2, an a oil absorption (g/100 g) of 12, and a loose bulk density (g/l) of 885. view less | |
| GB-CK88B | Golden Bright Enterprise Co. Ltd. | GB-CK88B is a dehydroxylated aluminum silicate produced by a controlled, high-temperature heating of a water-fractionated kaolin. GB-CK88B was specifically designed for use as a filler in automobile electrophoresis prime coat, as a calcined kaolin pigment...view more GB-CK88B is a dehydroxylated aluminum silicate produced by a controlled, high-temperature heating of a water-fractionated kaolin. GB-CK88B was specifically designed for use as a filler in automobile electrophoresis prime coat, as a calcined kaolin pigment, with the property of high brightness, excellent light scattering, fine particle, is an extender that can replace titanium dioxide partly to improve the efficiency and reduce production costs, and can help paint to form easily the close-grained and smooth paint film. It is hard to sedimentate and stable in electrophoresis tank. With low impurity and good inertia, it can improve paint film's stability against corrosion and moisture-proof property. The particle has micro platy shape. The series has advantages of low oil absorption and easy dispersion. GB-CK88B, which is applied in automobile electrophoresis prime coat, supplies excellent deposition stability, paint film flattening, corrosion resistance, rim angle spreadability and uniformity. Calcined kaolin's excellent opacity and adhesion make paint film flatter and denser and get much better stone striking resistance property. view less | |
| Polyglykol 10000 FL | Clariant International Ltd. | Polyglykol 10000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmace...view more Polyglykol 10000 FL is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 FL can be supplied as melt in heated tank trucks, and it has a molecular weight of 9000-11250g/mol. This grade melt also has to be stored under a nitrogen blanket at 60-80°C. Storage time of the melt shall not exceed 2-3 month. This product is also available as Polyglykol 10000 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 100%. view less | |
| Polyglykol 10000 FL Terra | Clariant International Ltd. | Polyglykol 10000 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and...view more Polyglykol 10000 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 10000 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. view less | |
| Polyglykol 600 Terra | Clariant International Ltd. | Polyglykol 600 Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and moul...view more Polyglykol 600 Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 600 Terra is a viscous liquid at room temperature, and it has a molecular weight of 570 – 630g/mol. Polyglykol 600 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. view less | |
| Polyglykol 1500 FL Terra | Clariant International Ltd. | Polyglykol 1500 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and ...view more Polyglykol 1500 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 1500 FL Terra can be supplied in heated tank trucks. Polyglykol 1500 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. view less | |
| Polyglykol 8000 FL Terra | Clariant International Ltd. | Polyglykol 8000 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and ...view more Polyglykol 8000 FL Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; and humectant and plasticizer for adhesives. Polyglykol 8000 FL Terra can be supplied in heated tank trucks, and it has a molecular weight of 7300 – 9000g/mol. Polyglykol 8000 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. view less | |
| Polyglykol 400 Terra | Clariant International Ltd. | Polyglykol 400 Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and moul...view more Polyglykol 400 Terra is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium. Polyglykol 400 Terra displays typical chemical reactions of alcohols/diols, and it has a molecular weight of 380 – 420g/mol. Polyglykol 400 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 100%. view less | |
| Polyglykol M 500 Terra | Clariant International Ltd. | Polyglykol M 500 Terra is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has...view more Polyglykol M 500 Terra is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has a molecular weight of 470 – 530g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Polyglykol M 500 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 95.4%. view less | |
| Polyglykol M 2000 FL Terra | Clariant International Ltd. | Polyglykol M 2000 FL Terra is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL Terra is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as ...view more Polyglykol M 2000 FL Terra is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL Terra is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as melt supplied in a heated tank truck. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Polyglykol M 2000 FL Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 98.7%. view less | |
| Polyglykol M 350 Terra | Clariant International Ltd. | Polyglykol M 350 Terra is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 Terra can be considere...view more Polyglykol M 350 Terra is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 Terra can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Polyglykol M 350 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 91.3%. view less | |
| Polyglykol M 750 Terra | Clariant International Ltd. | Polyglykol M 750 Terra is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 Terra can be considered as high molecular alcohol and therefore displays ...view more Polyglykol M 750 Terra is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 Terra can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. It has a molecular weight of 720 – 780g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. Polyglykol M 750 Terra provides the same performance as its conventional (no Terra) counterpart. As a member of the Terra-family, the purpose of the mass-balanced supply chain model is to use biobased or renewable raw materials. The mass balance is certified according to the REDCert2 and ISCC Plus standards for the chemical industry. This means: use of raw materials specified by the EU directive 2015/1513/EC Annex IX, no plastic waste, no animal origin, no Palm Oil/Palm Kernel Oil. Additional value includes replacement of fossil raw materials, reduced product carbon footprint compared to same materials made from fossil based raw materials, and RCI 96.9%. view less | |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...view more POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. view less | Request Sample |
| VEEGUM® R | Vanderbilt Minerals, LLC | VEEGUM® R is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive ...view more VEEGUM® R is derived from natural smectite clays that have been highly refined to produce uniform thixotropic aqueous dispersions at low concentrations. Unlike many other anti-settle additives, this product imparts good in-can stability without excessive viscosity. It prevents syneresis and settling, provides dripless application, controlled sag and improved leveling. view less | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. |
