| BECKOPOX™ VEH 2188w/55WA | Allnex | Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines. | Request Sample |
| TEGO® Cure 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener. | Request Sample |
| JEFFLINK® 136 Diamine | Huntsman Performance Products | JEFFLINK® 136 Diamine is a cycloaliphatic bis(secondary amine) chain extender for light-stable polyurea or polyurethane spray elastomer and coating systems where a slower reaction of amines is desirable. | |
| RESYDROL® VAF 5540w/70MP | Allnex | Resydrol® VAF 5540W/70MP is a non-drying alkyd resin, after neutralization with amines water-thin-able. It is an additional resin for waterdilutable primer surfacers to improve levelling. | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| Aminopropyldiethanolamine (APDEA) | Huntsman Performance Products | Aminopropyldiethanolamine (APDEA) is a clear, essentially colourless, high-boiling liquid undergoing reactions typical of primary amines and alcohols. Finds use as chain extender or co-curing agent in coatings and can serve as a chemical intermediate. | |
| Hexatran™-100 | Ascend Performance Materials Operations LLC | Hexatran™-100 is an innovative trifunctional clear amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & com...view more Hexatran™-100 is an innovative trifunctional clear amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. view less | |
| Hexatran™-300 | Ascend Performance Materials Operations LLC | Hexatran™-300 is an innovative trifunctional brown amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & com...view more Hexatran™-300 is an innovative trifunctional brown amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. view less | |
| RESYDROL® VAF 6111w/60WA | Allnex | RESYDROL® VAF 6111W/60WA is an oxidatively drying alkyd resin as aqueous emulsion, free of amines and ammonia. It is especially suitable for waterborne flat, semi gloss and high gloss paints for wood, walls and ceilings. | Request Sample |
| Hexatran™-200 | Ascend Performance Materials Operations LLC | Hexatran™-200 is an innovative trifunctional straw-colored amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solven...view more Hexatran™-200 is an innovative trifunctional straw-colored amine. It has an equal or better performance than other amines used in epoxies and oil & gas applications. It also provides high boiling point/low vapor pressure, low odor & color, and high solvency & compatibility. view less | |
| ACCELERATOR 399 | Huntsman Performance Products | Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy system...view more Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy systems. view less | |
| Bakzid™ 10N | Arxada – Troy Corporation | Bakzid™ 10N in-can preservative consists of a combination of a bisoxazolidine and a pyridine derivative. Being an alkaline product it is especially designed for the protection of high pH products. Furthermore, the product is free of secondary amines. | |
| JEFFAMINE® SD-2001 Polyetheramine | Huntsman Performance Products | JEFFAMINE® SD-2001 polyetheramine is a liquid difunctional amine, with each amine being secondary. Applications include acting as a chain extender for polyureas and polyurethanes and inclusion in isocyanate prepolymer formations with benefits of low colou...view more JEFFAMINE® SD-2001 polyetheramine is a liquid difunctional amine, with each amine being secondary. Applications include acting as a chain extender for polyureas and polyurethanes and inclusion in isocyanate prepolymer formations with benefits of low colour and viscosity, slower reaction times than primary amines and lower viscosity isocyanate prepolymers. view less | |
| IDROBEN 3519 | Benasedo | IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube...view more IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube and can enamels. view less | Request Sample |
| Bisphenol A Epoxy Resin SM827 | Jiangsu Sanmu Group Corporation | Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, la...view more Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, laminates, electrical and electronics. view less | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...view more CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| GABEPRO® GPM-800 | Gabriel Performance Products | GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...view more GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| GABEPRO® GPM-8003 | Gabriel Performance Products | GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...view more GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...view more ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. view less | |
| Dimethyldipropylenetriamine (DMDPTA) | Huntsman Performance Products | Dimethyldipropylenetriamine (DMDPTA) is a clear, essentially colourless, high-boiling liquid that undergoes reactions typical of primary amines. DMDPTA contains one primary, one secondary and one tertiary amine group, which makes it of interest in many ap...view more Dimethyldipropylenetriamine (DMDPTA) is a clear, essentially colourless, high-boiling liquid that undergoes reactions typical of primary amines. DMDPTA contains one primary, one secondary and one tertiary amine group, which makes it of interest in many applications for use as co-curing agent, accelerator, chain extender, or as reactive intermediate in synthesis. view less | |
| RESYDROL® AX 246w/70BG | Allnex | Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade...view more Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. view less | Request Sample |
| RESYDROL® AX 247w/70BGMP | Allnex | Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-gra...view more Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. view less | Request Sample |
| Neopentane diamine | BASF SE, Intermediates Division | Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with ep...view more Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines. view less | |
| BECKOCURE™ EH 2261w/41WA | Allnex | BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corros...view more BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corrosion protection and very good non-sagging properties can be formulated, which show good adhesion on untreated, smooth or galvanized steel substrates. view less | Request Sample |
| GENORAD* 40 | Rahn AG | GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varn...view more GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varnishes, adhesives and overprint varnishes. It improves adhesion on metal. view less | Request Sample |
| 3-Amino Propyl Vinyl Ether, APVE | BASF SE, Intermediates Division | 3-Amino Propyl Vinyl Ether, APVE is a Monomer for amine functional copolymer. Copolymers with a content of 0.5 to 10% by weight of the APVE have good reactivity. Polymeric amines are useful for textile auxiliaries, paper fabrication, trapping heavy metal,...view more 3-Amino Propyl Vinyl Ether, APVE is a Monomer for amine functional copolymer. Copolymers with a content of 0.5 to 10% by weight of the APVE have good reactivity. Polymeric amines are useful for textile auxiliaries, paper fabrication, trapping heavy metal, ion exchange resins, purification of waste water, flocculation, biomedical and pharmaceutical application. view less | |
| Telalit 3404 X 70 | Spolchemie | Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. T...view more Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. Telalit 3404 X 70 is primarily used in the formulation of two-component anti-corrosive epoxy coatings. view less | |
| CORRGUARD™ LSA | LEHVOSS Group | CORRGUARD™ LSA is a new product developed by ANGUS in response to a market request for a product containing a maximum of 1% secondary amine. It contains less than 0.75% of secondary amines by product specification and is made from an enhanced production p...view more CORRGUARD™ LSA is a new product developed by ANGUS in response to a market request for a product containing a maximum of 1% secondary amine. It contains less than 0.75% of secondary amines by product specification and is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. view less | |
| WorléeSol 68 A | Worlée-Chemie G.m.b.H. | WorléeSol 68 A is a silicone modified, air drying alkyd resin, which is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 75% ± 2. W´Sol 68 A is especially suitable as the only binder for the manufacture...view more WorléeSol 68 A is a silicone modified, air drying alkyd resin, which is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 75% ± 2. W´Sol 68 A is especially suitable as the only binder for the manufacture of extremely high quality, water thinnable industrial paints. view less | |
| ADDAPT® Foamstop™ 600N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a w...view more ADDAPT® Foamstop™ 600N is a proprietary blend of Polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is completely soluble in water, biodegradable, effective over a wide pH range, and it does not contain mineral oil, amines, nitrates, or fluorides. view less | |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| Ancamine™ 2264 | Evonik Operations GmbH, BL Crosslinkers | Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffnes...view more Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffness and elevated temperature performance in cured systems, compared with cycloaliphatic diamine-cured systems. Applications for this product include filament winding, resin transfer molding, potting for tooling, electrical and general industrial applications. view less | Request Sample |
| Novapol U7101-70 | Novaresine S.r.l | Novapol U7101-70 is an unsaturated polyester resin that is catalyzed with amines to improve reactivity with peroxide. It is suitable to formulate mastics and filler for marble and car refinishing as well as abrasive mixtures. Products that are formulated ...view more Novapol U7101-70 is an unsaturated polyester resin that is catalyzed with amines to improve reactivity with peroxide. It is suitable to formulate mastics and filler for marble and car refinishing as well as abrasive mixtures. Products that are formulated with the resin are marked by high reactivity at lower temperatures and high compatibility with all marble surfaces. view less | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...view more BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. view less | Request Sample |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less | |
| Borchi® Kat 22 | OMG Borchers GmbH | Borchi® Kat 22 is a tin-free catalyst based on metal carboxylate. It is an accelerator for solventborne one and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. This product contains no organic complexing agents and is an e...view more Borchi® Kat 22 is a tin-free catalyst based on metal carboxylate. It is an accelerator for solventborne one and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. This product contains no organic complexing agents and is an ecologically safe replacement for other polyurethane catalysts, especially for tertiary amines and dibutyl tin dilaurate (DBTL). view less | |
| Borchi® Kat 15 | OMG Borchers GmbH | Borchi® Kat 15 is a tin-free catalyst based on zinc neodecanoate. It is an accelerator for solventborne one and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. This product contains no organic complexing agents and is an e...view more Borchi® Kat 15 is a tin-free catalyst based on zinc neodecanoate. It is an accelerator for solventborne one and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. This product contains no organic complexing agents and is an ecologically safe replacement for other polyurethane catalysts, especially for tertiary amines and dibutyl tin dilaurate (DBTL). view less | |
| GABEPRO® GPM-800LO | Gabriel Performance Products | GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and...view more GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. GPM-800LO is formulated to have an improved odor relative to our standard product. view less | |
| GABEPRO® GPM-888 | Gabriel Performance Products | GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low te...view more GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. This material is formulated to cure epoxy resin in approximately 5 minutes. view less | |
| ADDAPT® Foamstop™ 100N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usab...view more ADDAPT® Foamstop™ 100N is a proprietary blend of polyalkyleneglycols and surface-active components. It is used as a foam control agent in paint, printing ink, and floor polish. This product is a light yellow liquid and is completely soluble in water, usable over a wide pH range, biodegradable, and it does not contain mineral oil, amines, nitrates, or fluorides. view less | |
| LUNA-CURE DMP-30 | DKSH | LUNA-CURE DMP-30 is used to accelerate the speed of the cure of epoxy resins and improve the strength of the cured material. It can also be used to catalyze acid- or anhydride curing of epoxy systems. LUNA-CURE DMP-30 also finds use as a hardening agent f...view more LUNA-CURE DMP-30 is used to accelerate the speed of the cure of epoxy resins and improve the strength of the cured material. It can also be used to catalyze acid- or anhydride curing of epoxy systems. LUNA-CURE DMP-30 also finds use as a hardening agent for polyamides, poly mercaptans, and fatty amines, and as a trimerization catalyst for polyurethanes. view less | Request Sample |
| Atresol LO 80/50 W | Atcoat GmbH | Atresol LO 80/50 W is an alkyd emulsion, consisting of talloil, suitable for stains, paints, and primers, which has good adhesion to difficult substrates, good penetration properties, no organic solvent, no alkyl phenol ethoxylates, and no amines. Atresol...view more Atresol LO 80/50 W is an alkyd emulsion, consisting of talloil, suitable for stains, paints, and primers, which has good adhesion to difficult substrates, good penetration properties, no organic solvent, no alkyl phenol ethoxylates, and no amines. Atresol LO 80/50 W has an oil length of 81, a solid of 50% and a viscosity of 40 to 150 mPas. view less | |
| Atresol LO 177/50 W | Atcoat GmbH | Atresol LO 177/50 W is an alkyd emulsion, consisting of linseed, suitable for stains, paints, and primers, which has exterior durability, good adhesion to difficult substrates, good penetration properties, no organic solvent, no alkyl phenol ethoxylates, ...view more Atresol LO 177/50 W is an alkyd emulsion, consisting of linseed, suitable for stains, paints, and primers, which has exterior durability, good adhesion to difficult substrates, good penetration properties, no organic solvent, no alkyl phenol ethoxylates, and no amines. Atresol LO 177/50 W has an oil length of 76, a solid of 50% and a viscosity of 10 to 100 mPas. view less | |
| WorléeSol 65 A | Worlée-Chemie G.m.b.H. | WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinna...view more WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 65 A have a very good corrosion resistance. view less | |
| Atresol LO 82/60 W | Atcoat GmbH | Atresol LO 82/60 W is an alkyd emulsion, consisting of soya and linseed, suitable for industrial wood primers and decorative paints, which has good rapid penetration properties, no alkyl phenol ethoxylates, little raising of wood grain, no amines, and no ...view more Atresol LO 82/60 W is an alkyd emulsion, consisting of soya and linseed, suitable for industrial wood primers and decorative paints, which has good rapid penetration properties, no alkyl phenol ethoxylates, little raising of wood grain, no amines, and no organic solvent. Atresol LO 82/60 W has an oil length of 83, a solid of 60% and a viscosity of 100 to 300 mPas. view less | |
| WorléeSol 61 E | Worlée-Chemie G.m.b.H. | WorléeSol 61 E is an air drying, special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 E show a very fast drying and through drying with excellent corrosion resistance. Due to ...view more WorléeSol 61 E is an air drying, special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 E show a very fast drying and through drying with excellent corrosion resistance. Due to it’s excellent wetting properties W´Sol 61 E is especially suitable for the manufacture of haze-free high gloss lacquers. view less | |
| Atresol MO 65/50 W | Atcoat GmbH | Atresol MO 65/50 W is an alkyd emulsion, consisting of high quality fatty acid, suitable for wood coatings and decorative paints, which have no alkyl phenol ethoxylates, low yellowing, improved drying properties, no amines, good gloss retention, and no or...view more Atresol MO 65/50 W is an alkyd emulsion, consisting of high quality fatty acid, suitable for wood coatings and decorative paints, which have no alkyl phenol ethoxylates, low yellowing, improved drying properties, no amines, good gloss retention, and no organic solvent. Atresol MO 65/50 W has an oil length of 48, a solid of 50% and a viscosity of 10 to 150 mPas. view less | |
| KRONOClean® 7000 | Kronos International, Inc. | KRONOClean® 7000 is a photocatalyst displaying not only activity in UV radiation, but also pronounced photoactivity in visible light. It is suitable for use in applications for eliminating unwanted odours (e.g. kitchen smells) and soiling on surfaces (e....view more KRONOClean® 7000 is a photocatalyst displaying not only activity in UV radiation, but also pronounced photoactivity in visible light. It is suitable for use in applications for eliminating unwanted odours (e.g. kitchen smells) and soiling on surfaces (e.g. nicotine), for air purification (amines, aldehydes, nitrogen oxides, mercaptans, etc.) and for improving room air quality (interior paints) in conjunction with paper, plastic films, window profiles, fibres, etc. view less | |
| WorléeSol 61 F | Worlée-Chemie G.m.b.H. | WorléeSol 61 F is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. For high glo...view more WorléeSol 61 F is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. For high gloss top coats and long term stability a combination of tri ethyl amine and ammonia is recommended. Alternatives like AMP-90 (Angus) etc. are also suitable. view less | |
| AEPD® VOX 1000 | ANGUS Chemical Company | AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply...view more AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply with EU directive 2004/42/EC. Compared with other neutralizing amines, AEPD® VOX 1000 Neutralizing Amine offers one of the best all-round performances when taking odor, VOC, wet paint and dry film properties into account. view less | |
| AFCONA - 1503 | AFCONA Additives Sdn Bhd | AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of ...view more AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH range. AFCONA - 1503 finds application in water- and solvent-based decorative paint systems. view less | |
| Dehysol® D82 | BASF Formulation Additives | Dehysol® D82 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to a...view more Dehysol® D82 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ageing. It is compatible with PVC, many other plastics, synthetic resins, plasticizers and gives transparent films. It can be hardened with acids, anhydrides, and amines. Moreover, it remains stable even at higher temperatures. view less | |
| GENOMER* 7151 | Rahn AG | GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use...view more GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less | Request Sample |
| EBECRYL® 4587 | Allnex | EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance...view more EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes. view less | Request Sample |
| WorléeSol 07 A | Worlée-Chemie G.m.b.H. | WorléeSol 07 A is an air drying, water thinnable alkyd used for the manufacture of water thinnable air and forced drying primers and top coats with a relatively low viscosity. It is a special fatty acid based alkyd, which will be water thinnable after neu...view more WorléeSol 07 A is an air drying, water thinnable alkyd used for the manufacture of water thinnable air and forced drying primers and top coats with a relatively low viscosity. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 75%. Primers based on W´Sol 07 A show a very fast drying, excellent adhesion, long term elasticity and good corrosion resistance. view less | |
| Borchi® Kat 0245 | OMG Borchers GmbH | Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyuret...view more Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. This product is suitable for automotive refinishing and industrial coating. In these formulations, Borchi® Kat 0245 is characterized by its very good and consistent activity and stability, even after prolonged storage. view less | |
| WorléeSol 65 E | Worlée-Chemie G.m.b.H. | WorléeSol 65 E is an air-drying short oil alkyd-based on special fatty acids. It is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 70% ± 1. It is designed for the manufacture of water thinnable, aird...view more WorléeSol 65 E is an air-drying short oil alkyd-based on special fatty acids. It is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 70% ± 1. It is designed for the manufacture of water thinnable, airdrying and forced dried primers and top coats. Primers based on W´Sol 65 E have a very good corrosion resistance if they are pigmented with e.g. zinc phosphate PZ 20 / Alcophor 827 (Henkel). view less | |
| Atresol LO 70/60 W | Atcoat GmbH | Atresol LO 70/60 W is an alkyd emulsion, consisting of talloil fatty acid, suitable for industrial wood primers and decorative paints, which have good penetration properties, low yellowing, good flexibility, good weathering, and is also suitable for water...view more Atresol LO 70/60 W is an alkyd emulsion, consisting of talloil fatty acid, suitable for industrial wood primers and decorative paints, which have good penetration properties, low yellowing, good flexibility, good weathering, and is also suitable for water-based pigment preparations with no alkyl phenol ethoxylates, no amines, and no organic solvent. Atresol LO 70/60 W has an oil length of 82, a solid of 60% and a viscosity of 100 to 300 mPas. view less | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...view more Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. view less | |
| WorléeSol 64 E | Worlée-Chemie G.m.b.H. | WorléeSol 64 E is a short oil, air drying alkyd resin used for the manufacture of water thinnable air and forced drying primers and top coats. It is modified with special fatty acids and water thinnable after neutralization with ammonia or amines. Primers...view more WorléeSol 64 E is a short oil, air drying alkyd resin used for the manufacture of water thinnable air and forced drying primers and top coats. It is modified with special fatty acids and water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 64 E show very fast drying and good anti corrosion properties. The application of W´Sol 64 E systems is similar to the conventional systems, e.g. spraying, dipping, flow coating etc. view less | |
| GB nC4-OL™ | Green Biologics | GB nC4-OL™ is 100% renewable n-butanol produced through fermentation of C5 and C6 sugars by Green Biologics' proprietary Clostridium microbial biocatalysts. N-butanol is a 4 carbon, straight chain alcohol used extensively as a solvent and as an intermedia...view more GB nC4-OL™ is 100% renewable n-butanol produced through fermentation of C5 and C6 sugars by Green Biologics' proprietary Clostridium microbial biocatalysts. N-butanol is a 4 carbon, straight chain alcohol used extensively as a solvent and as an intermediate in the production of monomers, polymeric emulsions, esters, and glycol ethers. It is also used in the production of amino resins used as curing agents in paints and coatings, and as an intermediate in the production of plasticizers and amines. view less | |
| Benzophenone | LEHVOSS Group | Benzophenone are off-white flakes designed for UV light photopolymerisation of systems based on acrylic oligomers and monomers. The radical generation occurs via Hydrogen abstraction by the action of a co-initiator such as tertiary amines. This product is...view more Benzophenone are off-white flakes designed for UV light photopolymerisation of systems based on acrylic oligomers and monomers. The radical generation occurs via Hydrogen abstraction by the action of a co-initiator such as tertiary amines. This product is insoluble in water, and soluble in most common organic solvents, monomers, and oligomers for UV applications. The main suggested applications are in the manufacturing of OPV, coatings for flooring, printing inks, adhesives, and clear lacquers for wood, plastic, paper, metal, optical fibers. view less | |
| WorléeSol 61 A | Worlée-Chemie G.m.b.H. | WorléeSol 61 A is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers base...view more WorléeSol 61 A is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 A show a very fast drying and throughdrying with excellent corrosion resistance. The best corrosion resistance will be obtained with the chromate free combination zinc phosphate ZP 20 + 0.5-2.0% Alcophor 827 (Heubach/Henkel). view less | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...view more Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. view less | |
| Borchi® Kat 24 | OMG Borchers GmbH | Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less | |
| Borchi® Kat 320 | OMG Borchers GmbH | Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be ...view more Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® Kat 315 | OMG Borchers GmbH | Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat...view more Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| NACURE® 2530 | King Industries, Inc. | NACURE® 2530 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant and appears as a clear, straw liquid. It has a low pH which allows for faster cure and reduces the potential of wrinkling from volatile amines, particularly at cure temperatures...view more NACURE® 2530 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant and appears as a clear, straw liquid. It has a low pH which allows for faster cure and reduces the potential of wrinkling from volatile amines, particularly at cure temperatures of 121° C (250° F) or higher. This product can be applied in appliance finishes, coil coatings, can coatings, wood coatings, paper coatings, automotive topcoats, and general industrials. It is soluble in alcohols, esters, glycols, glycol ethers, and water. It is partially soluble in ketones and insoluble in aliphatic and aromatic hydrocarbons. view less | |
| ESACURE TZT | LEHVOSS Group | ESACURE TZT is a clear, pale yellow, eutectic liquid mixture of 2,4,6 trimethylbenzophenone and 4-methylbenzophenone. It is also a benzophenone free photoinitiator. This product is particularly indicated for the photopolymerisation of UV curable systems w...view more ESACURE TZT is a clear, pale yellow, eutectic liquid mixture of 2,4,6 trimethylbenzophenone and 4-methylbenzophenone. It is also a benzophenone free photoinitiator. This product is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor, and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines. Due to its liquid form, high solubility, and compatibility with the various curable systems, it can be easily incorporated by mixing and stirring. view less | |
| Hydro-Rez™ 6500 A | Lawter | Hydro-Rez™ 6500 A is a fumaric modified rosin ester, soluble in alcohol and can be dispersed in water with amines, ammonia and morpholine. It exhibits gloss and pigment wetting in aqueous inks, while also showing a fast water release in aqueous inks. The ...view more Hydro-Rez™ 6500 A is a fumaric modified rosin ester, soluble in alcohol and can be dispersed in water with amines, ammonia and morpholine. It exhibits gloss and pigment wetting in aqueous inks, while also showing a fast water release in aqueous inks. The product shows good adhesion on aluminum foil, can be diluted in water while a low viscosity, high rub resistance and good flexibility display its other benefits. It can be used in carton and specialty inks and in gravure and flexographic inks. view less | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| ESACURE TZM | LEHVOSS Group | ESACURE TZM is a clear, pale yellow liquid that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated for the photopolymerisation of UV curable systems when h...view more ESACURE TZM is a clear, pale yellow liquid that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor, and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines. Due to its liquid form, high solubility, and compatibility with the various curable systems, ESACURE TZM can be easily incorporated by mixing and stirring. view less | |
| Borchi® Kat 0244 | OMG Borchers GmbH | Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. The use of Borchi® Kat 0244 ensures fast blocking stability of polyurethane coatings. It also improves solvent resistance, high film hardness and early sandability of the coating. This product is suitable for automotive refinishing. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| AAEM | DKSH | AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for se...view more AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for self-crosslinkable, room temperature cure acrylic emulsions. It also finds use in acetoacetylated polymers crosslinked through chelation with metal ions and for acetoacetylated polymers for producing colorfast fibers (azo-dye). AAEM readily polymerizes with other acrylic and methacrylic monomers. Chemical name: Acetoacetoxyethyl Methacrylate. This product is available in Europe, Asia and North America. view less | Request Sample |
| Borchi® Kat 0243 | OMG Borchers GmbH | Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. Borchi® Kat 0243 accelerates the chemical reaction between the alcohol and isocyanate component of polyurethane coating systems, thus allowing optimum steering of the drying properties, both during force-drying and curing at room temperature. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Dispersogen® FSE | Clariant International Ltd. | Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...view more Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. view less | |
| WorléeDex 1177 | Worlée-Chemie G.m.b.H. | WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient ...view more WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient water resistance and resolubility during the printing process and after the stop of the roller. Due to its good compatibility with many resins and pigments W´Dex 1177 is also suitable as a combination partner for acrylic resins. W´Dex 1177 is especially environmental friendly because of its renewable raw materials and it is free of amines/ammonia and ethylene glycol. view less | |
| ECA 29 Epoxy Curing Agent | Huntsman Performance Products | ECA 29 Epoxy Curing Agent is a mixture of aliphatic polyamines derived from ethylenediamine, useful as an epoxy curing agent in applications where higher glass transition temperature and reasonably fast reactivity are needed with longer pot life. | |
| Borchi® Kat 0761 | OMG Borchers GmbH | Borchi® Kat 0761 is a tin-free catalyst based on zinc neodecanoate. It is an accelerator for solventborne one- and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. Borchi® Kat 0761 contains no organometal compounds and no o...view more Borchi® Kat 0761 is a tin-free catalyst based on zinc neodecanoate. It is an accelerator for solventborne one- and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. Borchi® Kat 0761 contains no organometal compounds and no organic complexing agents. Borchi® Kat 0761 is an ecologically safe replacement for other polyurethane catalysts, especially for tertiary amines and organotin compounds, such as DBTL. Borchi® Kat 0761 is suitable for one- and two-component solventborne polyurethane clear coats and pigmented coating systems, e.g. for automotive refinishing and industrial coatings as well as for Coil-Coating paints based on blocked isocyanate systems. In this application Borchi® Kat 0761 provides a high catalytic activity. view less | |
| SABIC TEA | Sabic Europe | SABIC TEA is a clear viscous hygroscopic liquid at room temperature with a mild ammonical odor. This product is used in cement/concrete, textile, oil field, electroplating, metal working, coatings, and mining applications. | |
| Polyether Amine MA 223 | DKSH | Polyether Amine MA 223 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 223 is about 230. Polyether amine MA 223 is a clear liquid with amine-like odor. It is i...view more Polyether Amine MA 223 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 223 is about 230. Polyether amine MA 223 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents, adhesives and surfactants. This product is available in Europe and North America. view less | Request Sample |
| Polyether Amine MA 240 | DKSH | Polyether Amine MA 240 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 240 is about 430. Polyether amine MA 240 is a clear liquid with amine-like odor. It is i...view more Polyether Amine MA 240 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 240 is about 430. Polyether amine MA 240 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents, adhesives and surfactants. This product is available in Europe and North America. view less | Request Sample |
| Polyether Amine MA 2200 | DKSH | Polyether Amine MA 2200 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 2200 is about 2000. Polyether amine MA 2200 is a clear liquid with amine-like odor. It ...view more Polyether Amine MA 2200 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 2200 is about 2000. Polyether amine MA 2200 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents and polyurea. This product is available in Europe and North America. view less | Request Sample |
| N,N-Dimethylbenzyl-amine Lupragen® N 103 | BASF SE, Intermediates Division | N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modifie...view more N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts). view less | |
| Eastman Vantex® T | Eastman Chemical B.V. | Eastman Vantex® T is a zero VOC amine additive for paint and coatings, and is available as liquid. | |
| Monomer SM6226 | Jiangsu Sanmu Group Corporation | Monomer SM6226 is a special tertiary acrylate used as a reactive amine synergist. | |
| Monomer SM6338 | Jiangsu Sanmu Group Corporation | Monomer SM6338 is a special tertiary acrylate used as a reactive amine synergist. | |
| Ancamine® R 215 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® R 215 is an amine based hardener for epoxy systems. It is a colourless low viscosity liquid with a faint amine odor. | Request Sample |
| ED-900 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-900 Polyether Amine is a colorless to light yellow aliphatic polyether diamine which is water soluble. This product has a molecular weight of 900 and a melting point which is close to room temperature. ED-900 Polyether Amine provides flexibility, hydr...view more ED-900 Polyether Amine is a colorless to light yellow aliphatic polyether diamine which is water soluble. This product has a molecular weight of 900 and a melting point which is close to room temperature. ED-900 Polyether Amine provides flexibility, hydrophilicity, reactivity, and biocompatability to coatings. view less | |
| ED-600 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-600 Polyether Amine is an aliphatic polyether diamine which appears as a colorless to light yellow liquid with a slight haze. This product has a molecular weight of 600 and pH value between 11 and 12. ED-600 Polyether Amine is used in the preparation o...view more ED-600 Polyether Amine is an aliphatic polyether diamine which appears as a colorless to light yellow liquid with a slight haze. This product has a molecular weight of 600 and pH value between 11 and 12. ED-600 Polyether Amine is used in the preparation or bio compatible articles and coatings. view less | |
| ED-2003 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-2003 Polyether Amine is a water soluble, aliphatic, diamine which appears as a white, waxy solid. This product has a molecular weight of 2000 and a water weight percentage of 0.35. ED-2003 Polyether Amine provides low color and vapor pressure, water so...view more ED-2003 Polyether Amine is a water soluble, aliphatic, diamine which appears as a white, waxy solid. This product has a molecular weight of 2000 and a water weight percentage of 0.35. ED-2003 Polyether Amine provides low color and vapor pressure, water solubility, and reactivity to water-based coatings. view less | |
| APMMEA | Huntsman Performance Products | APMMEA A clear, essentially colourless, low viscosity amine neutralizer, with a high flash point and a mild odour. Containing amine and alcohols groups, it provides multiple features. | |
| N,N-Dimethylcyclohexyl-amine Lupragen® N 100 | BASF SE, Intermediates Division | N,N-Dimethylcyclohexyl-amine Lupragen® N 100 is a catalyst for isocyanate reactions. Coatings technology for polyurethane resin production. | |
| T-3000 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | T-3000 Polyether Amine is a colorless to pale yellow primary polyether triamine. This product has an approximate molecular weight of 3000 and a water weight percentage of 0.25. T-3000 Polyether Amine works as an adhesion promoter in coatings. | |
| Telalit 180 | Spolchemie | Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispers...view more Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispersion. view less | |
| EBECRYL® 7201 | Allnex | EBECRYL® 7201 is an acrylated amine primarily used as a hydrogen donor or photoactivator in ultraviolet (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7201 has an accelerating ...view more EBECRYL® 7201 is an acrylated amine primarily used as a hydrogen donor or photoactivator in ultraviolet (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7201 has an accelerating effect on the UV cure speed. view less | Request Sample |
| JEFFAMINE® D-2000 Polyoxypropylenediamine | Huntsman Performance Products | JEFFAMINE® D-2000 Polyoxypropylenediamine is an amine-terminated polyoxypropylene diol that has wide use in epoxy and polyurea systems. | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...view more Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. view less | |
| Telalit 0492 | Spolchemie | Telalit 0492 is a yellow-brown colored amine hardener for epoxy resin systems. This product is an additive to a mixture of amine hardeners with medium pot life at room temperatures. Telalit 0492 is primarily used in curing of epoxy resins in civil enginee...view more Telalit 0492 is a yellow-brown colored amine hardener for epoxy resin systems. This product is an additive to a mixture of amine hardeners with medium pot life at room temperatures. Telalit 0492 is primarily used in curing of epoxy resins in civil engineering applications. It is also used in the manufacturing of adhesives. view less | |
| T-5000 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in c...view more T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in coatings and acts as an adhesive in epoxy systems. view less |
