| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...view more 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. view less | |
| WorléePol® 808 | Worlée-Chemie G.m.b.H. | WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combinati...view more WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combination with suitable amino resins, is the production of high gloss, heat curing overprint varnishes and inks. view less | |
| Vilaqua 553DL75 | Vil Resins | Vilaqua 553DL75 is a water-thinnable alkyd of a linseed oil fatty acid that can be used in water-based spray paints and inks. This product contains 36.5% fatty acids and 75% non-volatile compounds. | |
| Vilaqua 564DL75 | Vil Resins | Vilaqua 564DL75 is a water-thinnable alkyd of a linoleic-rich fatty acid that can be used in water-based decorative paints. It contains 31% fatty acids and 75% non-volatile compounds. | |
| Vilaqua 566P75 | Vil Resins | Vilaqua 566P75 is a water-thinnable alkyd of a linoleic rich fatty acid that can be used in water-based industrial or decorative paints. It contains 32% fatty acids and 75% non-volatile compounds. | |
| Epotec® TW 5001 | Aditya Birla | Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. T...view more Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, and adhesives. view less | |
| Epotec® TW 5002 | Aditya Birla | Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improve...view more Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, adhesives, and textile binders. view less | |
| Epotec® TW 5003H | Aditya Birla | Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improv...view more Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in protective coatings for steel & concrete, adhesives, fiber sizing applications, and textile binders. view less | |
| DT-1308 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DT-1308 is a high efficiency polyurethane duller with a fine particle size. It is suitable for use in water base automotive leather topcoat formulations to reduce gloss and enhance abrasion resistance. It is used as the primary dulling component to reduce...view more DT-1308 is a high efficiency polyurethane duller with a fine particle size. It is suitable for use in water base automotive leather topcoat formulations to reduce gloss and enhance abrasion resistance. It is used as the primary dulling component to reduce gloss levels to meet OEM specifications. view less | |
| Ink Absorbing Coating for Textile and Canvas B8204 | Tianjin Boyuan New Materials Co., Ltd. | B8204 is a kind of water based ink absorbing coating. It is mainly used as an ink absorbing layer on indoor textiles, banners, fabric and canvas. This product is non-toxic and non-polluting with the advantage of excellent color reducibility, printing prec...view more B8204 is a kind of water based ink absorbing coating. It is mainly used as an ink absorbing layer on indoor textiles, banners, fabric and canvas. This product is non-toxic and non-polluting with the advantage of excellent color reducibility, printing precision, water resistance and flexibility . view less | |
| Optilith™ 3 E | Lawter | Optilith™ 3 E is a water-balance regulator composed of non-volatile resins, special ingredients and mineral distillates. The product controls water balance, has low viscosity and has minimal impact on rheology and tack. It reduces water pick-up in lithogr...view more Optilith™ 3 E is a water-balance regulator composed of non-volatile resins, special ingredients and mineral distillates. The product controls water balance, has low viscosity and has minimal impact on rheology and tack. It reduces water pick-up in lithographic inks and has application in offset, heatset and sheet-fed inks. view less | |
| BS-088N | Quaker Color (a Division of McAdoo & Allen, Inc.) | BS-088N, in the form of a clear liquid, is a fluorosurfactant leveling and wetting aid for water base leather coatings. It can be used in leather base or topcoat applications to reduce surface tension, promote flow, and eliminate surface defects like fish...view more BS-088N, in the form of a clear liquid, is a fluorosurfactant leveling and wetting aid for water base leather coatings. It can be used in leather base or topcoat applications to reduce surface tension, promote flow, and eliminate surface defects like fish eyes or craters. view less | |
| Setalin™ V 457 E | Lawter | Setalin™ V 457 E is a tin-free alkyd resin with a linseed oil base that has a high viscosity resulting in low tack and fast setting benefits. It also displays good pigment wetting, low bronzing and reduced water sensitivity behavior. The product is used i...view more Setalin™ V 457 E is a tin-free alkyd resin with a linseed oil base that has a high viscosity resulting in low tack and fast setting benefits. It also displays good pigment wetting, low bronzing and reduced water sensitivity behavior. The product is used in offset, letterpress, screen ink and sheet-fed applications. view less | |
| Polyslip™ FA 09 E | Lawter | Polyslip™ FA 09 E is a solvent-based wax dispersion that has a stabilizing agent to reduce dephasing in storage. It is used as an additive to provide slip, scratch, block and rub resistance in water and solvent-based coatings, inks and overprint varnishes...view more Polyslip™ FA 09 E is a solvent-based wax dispersion that has a stabilizing agent to reduce dephasing in storage. It is used as an additive to provide slip, scratch, block and rub resistance in water and solvent-based coatings, inks and overprint varnishes. The product is used in packaging and gravure inks and in solvent borne and aqueous inks and coatings. view less | |
| ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less | Request Sample |
| Setalin™ V 456 E | Lawter | Setalin™ V 456 E is an alkyd resin with a linseed oil base that has a high viscosity, low tack and is a fast setting resin. It also has good pigment wetting properties and a high gloss. Other benefits include low bronzing and a reduced water sensitivity b...view more Setalin™ V 456 E is an alkyd resin with a linseed oil base that has a high viscosity, low tack and is a fast setting resin. It also has good pigment wetting properties and a high gloss. Other benefits include low bronzing and a reduced water sensitivity behavior. The product is suitable for use in offset, sheet-fed, letterpress and screen ink applications. view less | |
| SiSiB® PC6112 | SiSiB SILICONES | SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals fro...view more SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. view less | |
| ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...view more ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less | Request Sample |
| SiSiB® PC6122 | SiSiB SILICONES | SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV sili...view more SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. view less | |
| Hauthane HD-4664 | Hauthaway | Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart grea...view more Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart greater film flexibility. A balanced composition provides good stability with acrylic latices and confers superior strength, abrasion resistance and low temperature flexibility properties. HD-4664 can be used as a sole vehicle or blended with acrylic emulsions for spray or pad bath applications. Solids can be reduced with water to optimize dry coating weight. This product may also be thickened with associative thickeners for knife-over-roll or similar methods. view less | |
| SiSiB® PC6110 | SiSiB SILICONES | SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymer...view more SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers, leading to a better dispersibility, reduced melt viscosity and easier processing of filled plastics; for the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; in sealants; or for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating. view less | |
| Pangel FF | Tolsa SA | Pangel® FF by Tolsa is a rheological additive for aqueous systems. It acts as an anti-sagging- and anti-slipping agent. It provides workability, pumpability, thixotropy, and pseudoplastic properties, improving stability, suspension & application. It contr...view more Pangel® FF by Tolsa is a rheological additive for aqueous systems. It acts as an anti-sagging- and anti-slipping agent. It provides workability, pumpability, thixotropy, and pseudoplastic properties, improving stability, suspension & application. It controls system flow and consistency, ensuring optimal distribution of solvents, fillers & other components. It avoids both slipping & mortar sagging, reduces bleed & segregation during the application, and provides augmented density to the better handled. It helps improve adherence to the substrate and furnish better texturing & surface finishing properties. It is suitable for water-based paints and foundry coatings. The recommended dosage level is between 2-5%. Pangel® FF has a shelf life of 1 year. view less | |
| Pangel FG | Tolsa SA | Pangel® FG by Tolsa is a rheological additive for aqueous systems. It acts as an anti-sagging- and anti-slipping agent. It provides workability, pumpability, thixotropy, and pseudoplastic properties, improving stability, suspension & application. It contr...view more Pangel® FG by Tolsa is a rheological additive for aqueous systems. It acts as an anti-sagging- and anti-slipping agent. It provides workability, pumpability, thixotropy, and pseudoplastic properties, improving stability, suspension & application. It controls system flow and consistency, ensuring optimal distribution of solvents, fillers & other components. It avoids both slipping & mortar sagging, reduces bleed & segregation during the application, and provides augmented density to the better handled. It helps improve adherence to the substrate and furnish better texturing & surface finishing properties. It is suitable for water-based paints and foundry coatings. The recommended dosage level is between 2-5%. Pangel® FF has a shelf life of 1 year. view less | |
| Deuteron ST-L | Deuteron | Deuteron ST-L texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...view more Deuteron ST-L texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Deuteron ST | Deuteron | Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and op...view more Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Deuteron ST-S | Deuteron | Deuteron ST-S texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...view more Deuteron ST-S texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Deuteron ST-G | Deuteron | Deuteron ST-G texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...view more Deuteron ST-G texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
| Deuteron ST-M | Deuteron | Deuteron ST-M texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...view more Deuteron ST-M texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. view less | Request Sample |
