| Pinerez® 7053 E | Lawter | Pinerez® 7053 E is a formulated blend of plasticizers and resins that are used as a resin melt tackifier. The product is ideally suited for use in flooring adhesives. | |
| SYNTHEBOND™ PRIME 7501 | Synthomer | SYNTHEBOND™ PRIME 7501 is a coater ready acrylic emulsion polymer formulated for applications where high shear and high temperature resistance is needed. | |
| 964 Handheld Spectrophotometer | X-Rite Europe GmbH | 964 Handheld Spectrophotometer is a handheld 0/45 spectrophotometer designed to address a wide range of industry-specific color formulation and quality control needs. |  |
| DESMODUR® E 3265 MPA/SN | Covestro | An aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate (HDI). Ideal for use in the formulation of moisture-curing, one-component polyurethane coatings with good weather stability. | |
| DESMODUR® VL 2854 | Covestro | An aromatic polyisocyanate based on diphenylmethane diisocyanate (MDI) used as the hardener component in the formulation of solvent-free polyurethane systems. Also as a raw material for coating resins. | |
| DESMODUR® VL R 10 | Covestro | An aromatic polyisocyanate based on diphenylmethane diisocyanate used in combination with suitable low-viscosity Desmophen products to formulate solvent-free spray coatings and sealing compounds. | |
| DESMODUR® VL R 20 | Covestro | An aromatic polyisocyanate based on diphenylmethane diisocyanate used in combination with suitable low-viscosity Desmophen products to formulate solvent-free spray coatings and sealing compounds. | |
| DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| NexSil™ 125K-40 | Nyacol Nano Technology | NexSil™ 125K-40 is a colloidal silica at a 40% SiO2 concentration in water. A large particle product, it is primarily intended as an abrasive for formulated polishing slurries. | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| LumiSet™ LSR-141 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming r...view more LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish, without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. view less | |
| DESMOPHEN® 670 | Covestro | A slightly branched, hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75 and Desmodur N 3390, in the formulation of flexible, weather-stable coatings. | |
| DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| SUPRASEC® 2386 | Huntsman Polyurethanes EMEAI | SUPRASEC 2386 - uretonimine-modified MDI raw material / isocyanate from Huntsman Polyurethanes with improved miscibility for the formulation of two component (2k) adhesive systems and prepolymers. | |
| Desmophen® NH 1220 | Covestro | Desmophen® NH 1220 is an aminofunctional co-reactant for polyisocyanates used for the formulation of tough but flexible, lightfast and highly reactive two-component polyurethane spray coatings. | |
| Desmophen® NH 1420 | Covestro | Desmophen® NH 1420 is an aminofunctional co-reactant for polyisocyanates used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
| Desmophen® NH 1520 | Covestro | Desmophen® NH 1520 is an aminofunctional co-reactant for polyisocyanates used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
| DESMOPHEN® PL 817 | Covestro | A non-drying fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. | |
| Epokukdo YU-300 | Kukdo Chemical Co., Ltd. | Epokukdo YU-300 is a epoxy modified polyol as Isocyanate curing type. Especially, it has a low temperature curing property and used in formulating for anti-corrosive paint. | |
| NexSil™ 85K-40 | Nyacol Nano Technology | NexSil™ 85K-40 is a colloidal silica of 50 nm colloidal silica at a 40% SiO2 concentration in water. This product is used as an abrasive for formulated polishing slurries. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| SYNTHEBOND™ 7656 | Synthomer | SYNTHEBOND™ 7656 is an acrylic emulsion polymer designed for formulating pressure sensitive adhesives for UL181B HVAC tapes. It demonstrates high cohesion and good instant peel. | |
| Ci4200 Compact Benchtop Spectrophotometer | X-Rite Europe GmbH | Ci4200 Compact Benchtop Spectrophotometer is an easy-to-use compact benchtop sphere spectrophotometer that, combined with Color QC and Formulation software, supports an evolving color management program. |  |
| 962 Handheld Spectrophotometer | X-Rite Europe GmbH | 962 Handheld Spectrophotometer is an entry-level handheld 0/45 spectrophotometer designed to address a wide range of industry-specific color formulation and quality control needs. |  |
| Silane Coupling Agent KH-350 | Zhejiang Feidian Chemical Co., Ltd. | KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellenc...view more KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices. view less | |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...view more ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. view less | Request Sample |
| Desmodur® BL 4265 SN | Covestro | Desmodur® BL 4265 SN is a blocked, aliphatic polyisocyanate based on IPDI ideal for use in combination with polyol components to formulate lightfast one-component stoving coatings. | |
| Desmodur® E 1160 MPA/X | Covestro | Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate ideal for use in the formulation of moisture-curing, one-component polyurethane coatings. | |
| DESMODUR® E 1660 | Covestro | An aromatic polyisocyanate prepolymer based on toluene diisocyanate ideal for the use in the formulation of fast-drying, moisturecuring one-component polyurethane coatings and as the hardener for two-component polyurethane coatings. | |
| DESMOPHEN® 1388 EA | Covestro | A fatty acid-modified, saturated polyester resin used as a coreactant for Desmodur® L 75, IL, HL and N 75 for the formulation of two-component polyurethane coatings. | |
| TIB KAT® 623 | TIB Chemicals | TIB KAT® 623 is a catalyst that is used in the deblocking of uretdiones for urethane coatings, in the condensation of silicone resins, in the crosslinking or powder resins and as a raw material for the formulation of PVC stabilizers. | Request Sample |
| SUPRASEC® 1306 | Huntsman Polyurethanes EMEAI | SUPRASEC 1306 - MDI raw material / isocyanate from Huntsman Polyurethanes used in the formulation of adhesives, sealants and prepolymers. Available frozen solid in drums or in liquid form in bulk. | |
| SUPRASEC® 2020 | Huntsman Polyurethanes EMEAI | SUPRASEC 2020 - Uretonimine-modified pure MDI raw material / prepolymer / isocyanate from Huntsman Polyurethanes with lower viscosity for the formulation of two component (2k) adhesive systems. | |
| SUPRASEC® 4102 | Huntsman Polyurethanes EMEAI | SUPRASEC 4102 - uretonimine-modified pure MDI raw material / isocyanate from Huntsman Polyurethanes with enhanced miscibility and low temperature stability for the formulation of flexible packaging adhesives. | |
| Tergum 120 | Ichemco | Tergum 120 is a stabilized pentaerythritol esterified rosin in a flake form. This product is most commonly used as a tackifier in water-based, solvent, and hot-melt adhesive formulation applications. | |
| LumiSet™ LSR-241P | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin th...view more LumiSet™ LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241P should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241P is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. Adding cellulosic film formers to this neat polyurethane resin increases the tack free dry time to acceptable nail lacquer dry times of two minutes or less. view less | |
| TIB KAT® 635 | TIB Chemicals | TIB KAT® 635 is a solid zinc based catalyst which is used for numerous applications. It is suitable as a raw material for wood treatment formulation and as a condensation catalyst for polyester resins. | Request Sample |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate ideal for use in the formulation of highly flexible coatings, sealers and two-component PU sealing compounds. | |
| DESMODUR® E XP 2723 | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a binder for the formulation of moisture-curing, one-component coatings and adhesives as well as a hardener for hydroxyl-bearingco-reactants. | |
| Desmodur® PL 340 BA/SN | Covestro | Desmodur® PL 340 BA/SN is a blocked aliphatic polyisocyanate based on IPDI used in combination with polyol components for the formulation of lightfast one-component polyurethane stoving coatings. | |
| Desmodur® PL 350 MPA/SN | Covestro | Desmodur® PL 350 MPA/SN is a blocked aliphatic polyisocyanate based on HDI used in combination with polyol components for the formulation of lightfast one-component polyurethane stoving coatings. | |
| Desmophen® 650 MPA | Covestro | Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75, in the formulation of lightfast and weather-stable, two-component coatings. | |
| Desmophen® 651 MPA | Covestro | Desmophen® 651 MPA is a branched hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75, in the formulation of lightfast and weather-stable two-pack coatings. | |
| SUPRASEC® 1007 | Huntsman Polyurethanes EMEAI | SUPRASEC 1007 - low NCO prepolymer raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of one component (1k) rubber crumb binders, sealants and parquet glues. | |
| SUPRASEC® 2010 | Huntsman Polyurethanes EMEAI | SUPRASEC 2010 - MDI raw material / isocyanate from Huntsman Polyurethanes with high mechanical and stiff bond properties for the formulation of high quality, two component (2k) cast elastomers. | |
| Desmodur® E 15 | Covestro | Desmodur® E 15 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate. It is ideal for use in the formulation of flexible coatings and sealing compounds. Desmodur® E 15 can be combined with Hardener® DT to formulate highly reactive two-com...view more Desmodur® E 15 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate. It is ideal for use in the formulation of flexible coatings and sealing compounds. Desmodur® E 15 can be combined with Hardener® DT to formulate highly reactive two-component systems which yield highly flexible highbuild coatings that can be used for crackbridging coatings on concrete surfaces. Combination with latent hardener (bisoxazolidine) produces highly flexible one-component systems for coating flat roofs. view less | |
| BR-742M | Bomar, formerly Dymax Oligomers & Coatings | BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nai...view more BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nail coating applications. It can also be effectively formulated for adhesion to steel, aluminum, and glass. Due to its low solvent resistance, it can be formulated into solvent strippable temporary coatings. This material has low skin sensitivity for dental and cosmetic applications. view less | |
| DESMODUR® 44 M FLAKES | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 M LIQUID | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC FLAKES | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC FUSED | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC LIQUID | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® E 2190 X | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture. | |
| DESMODUR® E 23 | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a binder for the formulation of moisture-curing, one-component coatings and adhesives, as well as a hardener for hydroxyl-bearing co-reactants. | |
| Desmophen® 670 BA | Covestro | Desmophen® 670 BA is a slightly branched hydroxyl-bearing polyester used as a co-reactant primarily with Desmodur N 75 and N 3390 in the formulation of weather-stable flexible coatings. | |
| SUPRASEC® 2388 | Huntsman Polyurethanes EMEAI | SUPRASEC 2388 - uretonimine-modified pure MDI raw material / isocyanate from Huntsman Polyurethanes with improved stability at low temperatures for the formulation of two component (2k) adhesive systems and prepolymers. | |
| SUPRASEC® 2085 | Huntsman Polyurethanes EMEAI | SUPRASEC 2085 - polymeric MDI grade raw material / isocyanate from Huntsman Polyurethanes with early crosslinking functionality for the formulation of fast cure prepolymer and two component (2k) adhesive systems. | |
| Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| DESMODUR® BL 3175 SN | Covestro | A blocked, aliphatic polyisocyanate based on HDI. Ideal for use in combination with Desmophen grades to formulate lightfast, one-component polyurethane stoving coatings; as an additive in conventional stoving systems to improve flexibility and adhesion. | |
| DESMODUR® VL | Covestro | An aromatic polyisocyanate based on diphenylmethane diisocyanate. Ideal for use in combination with suitable Desmophen grades in the formulation of solvent-free two-component polyurethane coatings, fillers, sealing compounds and synthetic resin mortars. | |
| DESMOPHEN® 775 XP | Covestro | An aromatic free, branched hydroxyl-bearing polyester used as a coreactant, usually with Desmodur N 75, N 3200 or N 100 in the formulation of very lightfast and weather-stable two pack coating. | |
| SUPRASEC® 1042 | Huntsman Polyurethanes EMEAI | SUPRASEC 1042 - emulsifiable polymeric MDI raw material / isocyanate from Huntsman Polyurethanes for use as a crosslinker in the formulation of two component (2k) latex systems, as a hardener for EPI glue, and in waterborne primers. | |
| DESMOPHEN® VP LS 2089 | Covestro | A hydroxyl-bearing polyester used in combination with Desmodur N 75, N 3390 and N 3600 to formulate two component polyurethane coatings with good light stability, chalking resistance and gloss retention. | |
| Kingmide 326-A | Sanho Chemical Co., Ltd. | Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications. | |
| Razeentint PB 7 | Jubail Chemical Industries Co. | Razeentint PB 7 is a black tinting paste formulated with organic and inorganic pigments with a viscosity of 5,000-12,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PG 7 | Jubail Chemical Industries Co. | Razeentint PG 7 is a green tinting paste formulated with organic and inorganic pigments with a viscosity of 6,000-12,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PR 101 | Jubail Chemical Industries Co. | Razeentint PR 101 is a red tinting paste formulated with organic and inorganic pigments with a viscosity of 8,000-13,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PY 42 | Jubail Chemical Industries Co. | Razeentint PY 42 is a yellow tinting paste formulated with organic and inorganic pigments with a viscosity of 1,000-3,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| COPONYL™ 5706-A | Nippon Gohsei | COPONYL™ 5706-A is a pressure sensitive adhesive resin formulated from acrylic acid ester using toluene and cellosolve solvents. It is ideal for screen coatings. This product is well suited for use in adhesives. | |
| SUPRASEC® 2234 | Huntsman Polyurethanes EMEAI | SUPRASEC 2234 - multi-purpose MDI raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of slow cure, one component (1k) adhesive, rubber crumb binder and parquet glue applications. | |
| SUPRASEC® 2018 | Huntsman Polyurethanes EMEAI | SUPRASEC 2018 - MDI raw material / isocyanate from Huntsman Polyurethanes with excellent low-temperature stability and high mechanical properties for the formulation of high quality, two component (2k), cast elastomer applications. | |
| SUPRASEC® 2021 | Huntsman Polyurethanes EMEAI | SUPRASEC 2021 - hard block-modified pure MDI raw material / isocyanate from Huntsman Polyurethanes for the formulation of high performance, two component (2k) rigid bond adhesives with high mechanical properties. | |
| KISAMID® 1036 | Paksoy Kimyevi Maddeler San. ve Tic. A.S. | KISAMID® 1036 is a formulated polyamine adduct hardener. This hardener has an amine value of 310 to 335. It is used in solvent free coatings and epoxy mortars requiring chemical resistance and good surface properties. | |
| KISAMID® 1038 | Paksoy Kimyevi Maddeler San. ve Tic. A.S. | KISAMID® 1038 is a Formulated polyamine adduct hardener. This hardener has an amine value of 360 to 400. It is used in solvent free coatings and self-leveling epoxy mortars and fillers requiring a high reactivity. | |
| Kingmide 533 | Sanho Chemical Co., Ltd. | Kingmide 533 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 100-110°C. Kingmide 533 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 315-FS | Sanho Chemical Co., Ltd. | Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications. | |
| Kingmide 507-KS | Sanho Chemical Co., Ltd. | Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications. | |
| Razeentint PB 15:4 | Jubail Chemical Industries Co. | Razeentint PB 15:4 is a blue tinting paste formulated with organic and inorganic pigments with a viscosity of 4,000-10,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Rolflex® BK36 | DKSH | Rolflex® BK 36 has high stability at room temperature and can be formulated with waterborne polyurethane or acrylic resins to obtain compounds with long pot-life. It can be applied by padding, coating, or printing. | Request Sample |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI. Ideal for use in combination with cycloaliphatic diamines such as Laromin C 260 (BASF) to formulate highly flexible, one-component stoving coatings. | |
| Desmodur® E 21 | Covestro | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants...view more Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants. view less | |
| DESMODUR® E 22 | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. Ideal for the use in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible aggregates, e.g. ...view more An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. Ideal for the use in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible aggregates, e.g. rubber granules. view less | |
| Desmodur® L 67 BA | Covestro | Desmodur® L 67 BA is an aromatic polyisocyanate based on tolulene diisocyanate used in combination with various Desmophen grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings. | |
| Desmodur® L 75 | Covestro | Desmodur® L 75 is an aromatic polyisocyanate based on tolulene diisocyanate used in combination with various Desmophen , Baycoll , Desmocoll grades or other hydroxyl-bearing substances to formulate two-component polyurethane coatings and adhesives. | |
| SUPRASEC® 2060 | Huntsman Polyurethanes EMEAI | SUPRASEC 2060 - MDI raw material / isocyanate from Huntsman Polyurethanes with increased reactivity for use in the formulation of one component (1k), fast, moisture cure adhesives that need to offer a strong long lasting bond. | |
| SUPRASEC® 2385 | Huntsman Polyurethanes EMEAI | SUPRASEC 2385 - uretonimine-modified pure variant MDI raw material / isocyanate from Huntsman Polyurethanes with enhanced wetting properties for prepolymers and the formulation of two component (2k) adhesive systems with better miscibility / compatability...view more SUPRASEC 2385 - uretonimine-modified pure variant MDI raw material / isocyanate from Huntsman Polyurethanes with enhanced wetting properties for prepolymers and the formulation of two component (2k) adhesive systems with better miscibility / compatability. view less | |
| Tergum 42 | Ichemco | Tergum 42 is a liquid rosin triethylglycol ester. This product has a viscosity of 39,000-62,000 Cp. Tergum 42 is most commonly used as a tackifier in water-based, solvent, and hot-melt adhesive formulation applications. | |
| DESMOPHEN® PL 800 | Covestro | A fatty acid-modified polyester resin of low molecular weight used as a co-reactant for polyisocyanates (Desmodur HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. | |
| Kingmide 315-FC | Sanho Chemical Co., Ltd. | Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications. | |
| Kingmide 513-F | Sanho Chemical Co., Ltd. | Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications. | |
| Tacksol ER 19 | Ichemco | Tacksol ER 19 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%. Tacksol ER 19 is most commonly used in adhesive and primer formulation applications. | |
| Airase® 5700 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no adde...view more Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no added solvent, HAPs, or alkylphenol ethoxylates. This siloxane-based defoamer was developed for use in a wide range of water-based applications. Airase® 5700 Defoamer is formulated for incorporation in the let-down of a coating or ink. Airase® 5700 Defoamer can provide an excellent balance of effective defoaming and film compatibility. view less | |
| BR-581MT | Bomar, formerly Dymax Oligomers & Coatings | BR-581MT is an oligomer blend that provides a low-color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-...view more BR-581MT is an oligomer blend that provides a low-color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-yellowing finish. This product is a resin blend containing 25% DEGDMA, is tin-free, is fully INCI listed, and can be formulated into a tack-free top coat for nail gel applications. For further recommendations on formulating nail applications, please see our sell sheet for a starting point formula. view less | |
| SARBIO 5102 | Sartomer Americas | SARBIO 5102 is a monofunctional acrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers high Tg, excellent adhesion to your formulation and maintain the flexibility of a urethane acrylat...view more SARBIO 5102 is a monofunctional acrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers high Tg, excellent adhesion to your formulation and maintain the flexibility of a urethane acrylate. view less | |
| Desmodur® L 67 MPA/X | Covestro | Desmodur® L 67 MPA/X is an aromatic polyisocyanate based on tolulene diisocyanate used in combination with various Desmophen grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings. | |
| Bayhydrol® HD 2017 | Covestro | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
| Docure KH-816 | Kukdo Chemical Co., Ltd. | Docure KH-816 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-816 gives high gloss films that are resistant to various chemicals. These properties make it ideal for formulating floorings and tank linings. |
