| Lignostab® 1198 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Lignostab® 1198 is a photo stabilizer developed specifically for wood pre-treatments and effectively stops the photo-oxidation of lignin. It is highly effective for the color stabilization of natural and tinted or stained wood for interior application. Us...view more Lignostab® 1198 is a photo stabilizer developed specifically for wood pre-treatments and effectively stops the photo-oxidation of lignin. It is highly effective for the color stabilization of natural and tinted or stained wood for interior application. Used in wood primers for exterior applications it can extend the retention of properties such as coating adhesion and resistance to failures such as flaking and cracking, therefore resulting in higher durability. Especially for high performance outdoor applications where long-lasting coatings are required, e.g., wooden window frames, Lignostab® 1198 also allows the use of non- or low-pigmented coatings. view less | |
| Tinopal® OB CO | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinopal® OB CO is a fluorescent optical brightener/whitening agent that exhibits excellent heat resistance and high chemical stability. If Tinopal® OB CO is to be used in combination with a UV absorber, the absorption spectrum of the latter should leave a...view more Tinopal® OB CO is a fluorescent optical brightener/whitening agent that exhibits excellent heat resistance and high chemical stability. If Tinopal® OB CO is to be used in combination with a UV absorber, the absorption spectrum of the latter should leave an open window in the near UVA for the optical brightener. Due to the intrinsic light fastness properties of optical brigtheners, Tinopal® OB CO is recommended for indoor use only. It is recommended for applications such as: white and pastel-tone paints where it intensifies the degree of whiteness; clear coats and overprint varnishes where it is used to mask the yellowish inherent color and also to intensify the brilliance of white and colored base coats; primer and/or topcoats where it is used as a marker to identify voids, holidays and uneven coverage; black and blue printing inks to increase their deep tone; printing inks for quick identification, security and safeguard against forgeries (i.e., bank notes); packaging inks as promotional tool or as tracer for packaging lines; manufacture of fluorescent pigments/dyestuffs to reinforce the brightness of certain shades, particularly blue ones; thermal dye diffusion paper to enhance paper whiteness; film base for photographic paper. view less | |
| TINUVIN® 111 FDL | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | TINUVIN® 111 FDL is a specific blend of monomeric and oligomeric HALS developed for powder coatings, coil coatings, adhesives and sealants. It is designed to meet high performance and durability requirements of all exterior industrial applications. It is ...view more TINUVIN® 111 FDL is a specific blend of monomeric and oligomeric HALS developed for powder coatings, coil coatings, adhesives and sealants. It is designed to meet high performance and durability requirements of all exterior industrial applications. It is effective as an antioxidant and also shows tribo electric charging activity. It protects coatings against surface defects such as gloss reduction, cracking and chalking and also ensures the retention of mechanical properties. view less | |
| Tinuvin® 1130 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 1130 is a liquid hydrophilic benzotriazole-based UV absorber for coatings, printing and packaging, adhesives and sealants. It is universally applicable in solvent- and water-based coatings including UV-curable systems. This yellow to light amber ...view more Tinuvin® 1130 is a liquid hydrophilic benzotriazole-based UV absorber for coatings, printing and packaging, adhesives and sealants. It is universally applicable in solvent- and water-based coatings including UV-curable systems. This yellow to light amber liquid is used in the following applications: automotive and industrial coatings; wood stains and varnishes, wood-care products, waxes; architectural coatings (wall, floor coatings; heavy-duty maintenance and marine coatings; glass and ceramic coatings (architectural glazing, packaging); and adhesives and sealants. view less | |
| Tinuvin® 123 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 123 is a liquid non-basic HALS for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of all exterior solvent-based automotive and industrial coatings where basic HALS fai...view more Tinuvin® 123 is a liquid non-basic HALS for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of all exterior solvent-based automotive and industrial coatings where basic HALS fail. It protects coatings from surface defects such as gloss reduction, cracking and chalking and also improves the retention of mechanical properties. This product is a slightly yellow viscous liquid. Tinuvin® 123 is especially designed for coatings where traditional basic HALS fail due to acid/base interactions. It is suitable with the following applications: automotive OEM and industrial coatings; overprint varnishes over metal, board, paper, laminates; coil coatings; and adhesives and sealants. view less | |
| Tinuvin® 123 - DW | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 123-DW is an aqueous non-basic HALS for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of all exterior water-based coatings where basic HALS fail. It protects coatings...view more Tinuvin® 123-DW is an aqueous non-basic HALS for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of all exterior water-based coatings where basic HALS fail. It protects coatings from surface defects such as gloss reduction, cracking and chalking and also improves the retention of mechanical properties. Tinuvin® 123-DW is suitable for all water-based coating systems with low- to zero-VOC requirement. It is especially suitable for water-based paints based on acrylic and alkyd emulsions where biocides or acidic components (i.e., resins, catalysts …) are present and traditional basic HALS fail because of acid/base interactions. view less | |
| Tinuvin® 144 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 144 is a solid basic HALS containing an antioxidant function of the sterically hindered phenolic type for coatings, adhesives and sealants. It improves the tribo charge activity for powder coatings. It is designed to meet high performance and dur...view more Tinuvin® 144 is a solid basic HALS containing an antioxidant function of the sterically hindered phenolic type for coatings, adhesives and sealants. It improves the tribo charge activity for powder coatings. It is designed to meet high performance and durability requirements of automotive and industrial coating applications. It protects coatings from surface defects such as gloss reduction, cracking and chalking and also improves the retention of mechanical properties. Due to its antioxidant functionality Tinuvin® 144 is especially suitable for high application temperatures or for coatings exposed to high baking temperatures. It can be used in powder and coil coatings. view less | |
| Tinuvin® 292 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 292 is a multi-purpose liquid basic hindered amine light stabilizer (HALS) for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of solvent- and water-based exterior coat...view more Tinuvin® 292 is a multi-purpose liquid basic hindered amine light stabilizer (HALS) for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of solvent- and water-based exterior coatings applications including radiation-curable systems (UV, electron beam). It protects coatings from surface defects such as gloss reduction, cracking, and chalking. It improves retention of mechanical properties. Tinuvin® 292 is a multi-purpose HALS used in all industry segments. It is suitable for applications such as: automotive OEM and industrial coatings, architectural coatings; exterior joinery coatings, wood stains and varnishes; heavy-duty maintenance and marine coatings; and adhesives and sealants. view less | |
| Tinuvin® 384-2 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 384-2 is a liquid benzotriazole-based UV absorber for coatings, adhesives and sealants. It was designed to meet high performance and durability requirements of solvent-based automotive OEM and refinish as well as industrial coatings including UV-...view more Tinuvin® 384-2 is a liquid benzotriazole-based UV absorber for coatings, adhesives and sealants. It was designed to meet high performance and durability requirements of solvent-based automotive OEM and refinish as well as industrial coatings including UV-curable systems. This pale yellow liquid is suitable for the following applications: automotive OEM and refinish coatings; color-sensitive industrial coatings; glass and ceramic coatings (architectural glazing, …); overprint varnishes over metal, board, paper, laminates, …; and adhesives and sealants. view less | |
| Tinuvin® 400 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 400 is a liquid triazine-based UV absorber for coatings, adhesives, sealants and printing inks. It was designed to meet high performance and durability requirements of solvent-based transportation and industrial coatings including radiation-curab...view more Tinuvin® 400 is a liquid triazine-based UV absorber for coatings, adhesives, sealants and printing inks. It was designed to meet high performance and durability requirements of solvent-based transportation and industrial coatings including radiation-curable systems (UV, electron beam). It is a yellowish to brownish amber liquid. Tinuvin® 400 is especially suitable for coatings exposed to high baking temperatures and/or to extreme environmental conditions. view less | |
| Tinuvin® 400 - DW | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 400-DW is an aqueous triazine-based UV absorber dispersion for coatings, adhesives, sealants and printing inks. It was designed to meet high performance and durability requirements of water-based transportation and industrial coatings including r...view more Tinuvin® 400-DW is an aqueous triazine-based UV absorber dispersion for coatings, adhesives, sealants and printing inks. It was designed to meet high performance and durability requirements of water-based transportation and industrial coatings including radiation-curable systems (UV, electron beam). Tinuvin® 400-DW is especially suitable for water-based acrylics and PUD dispersions with low- to zero-VOC requirement or where traditional 2-(2-hydroxyphenyl)-benzotriazole UV absorbers fail due to metal and/or amine interactions with color formation or needs to be upgraded. view less | |
| Tinuvin® 405 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 405 is a solid triazine-based UV absorber for coatings. It was designed to meet the high performance and durability requirements of acrylic powder coatings for transportation and industrial applications. This light yellow powder is applied in hig...view more Tinuvin® 405 is a solid triazine-based UV absorber for coatings. It was designed to meet the high performance and durability requirements of acrylic powder coatings for transportation and industrial applications. This light yellow powder is applied in high-performance automotive OEM powder coatings and high-performance industrial powder coatings. For outdoor applications, Tinuvin® 405 needs to be combined with a hindered amine light stabilizer (HALS) such as Tinuvin® 144 or Tinuvin® 152. view less | |
| Tinuvin® 460 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 460 is a solid triazine-based UV absorber for packaging printing inks. It was designed to meet the highest performance and durability requirements in thin films or at reduced film thickness for solvent-based applications. Due to its extremely hig...view more Tinuvin® 460 is a solid triazine-based UV absorber for packaging printing inks. It was designed to meet the highest performance and durability requirements in thin films or at reduced film thickness for solvent-based applications. Due to its extremely high extinction, Tinuvin® 460 provides outstanding protection to coatings and light-sensitive substrates and materials. view less | |
| Tinuvin® 477 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 477 is a liquid triazine-based UV absorber for coatings, adhesives and sealants. It was designed to meet the high performance and durability requirements of exterior solvent-based industrial and architectural coatings including UV-curable systems...view more Tinuvin® 477 is a liquid triazine-based UV absorber for coatings, adhesives and sealants. It was designed to meet the high performance and durability requirements of exterior solvent-based industrial and architectural coatings including UV-curable systems. Due to its red-shifted nature Tinuvin® 477 is especially suitable for coatings or substrates inherently sensitive to UV-A light (e.g., wood). view less | |
| Tinuvin® 477 - DW | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 477-DW is an aqueous triazine-based UV absorber dispersion for coatings, adhesives and sealants. It was designed to meet the highest performance and durability requirements of exterior waterbased industrial and architectural coatings including UV...view more Tinuvin® 477-DW is an aqueous triazine-based UV absorber dispersion for coatings, adhesives and sealants. It was designed to meet the highest performance and durability requirements of exterior waterbased industrial and architectural coatings including UV-curable systems. This yellow dispersion is especially suitable for water-based acrylics and PUD dispersions with low- to zero-VOC requirement or where traditional 2-(2-hydroxyphenyl)-benzotriazole UV absorbers fail due to metal and/or amine interactions with color formation or needs to be upgraded. view less | |
| Tinuvin® 479 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 479 is a solid triazine-based UV absorber for coatings, adhesives, sealants and printing inks. It was designed to meet the highest performance and durability requirements in thin films or at reduced film thickness in solvent-based transportation ...view more Tinuvin® 479 is a solid triazine-based UV absorber for coatings, adhesives, sealants and printing inks. It was designed to meet the highest performance and durability requirements in thin films or at reduced film thickness in solvent-based transportation and industrial applications including radiation-curable systems (UV, electron beam). Due to its extremely high extinction Tinuvin® 479 is especially suitable for all reduced-film-thickness or thin-film applications exposed to high baking temperatures and/or to extreme environmental conditions. view less | |
| Tinuvin® 479 - DW | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 479 - DW is an aqueous triazine-based UV absorber dispersion for coatings, adhesives and sealants. It was designed to meet the highest performance and durability requirements, particularly in thin films or at reduced film thickness in water-based...view more Tinuvin® 479 - DW is an aqueous triazine-based UV absorber dispersion for coatings, adhesives and sealants. It was designed to meet the highest performance and durability requirements, particularly in thin films or at reduced film thickness in water-based transportation and industrial applications including radiation curable systems (UV, electron beam). Due to its extremely high extinction Tinuvin® 479-DW is especially suitable for all water-based coatings applied at reduced-film-thickness or for thin-film applications exposed to high baking temperatures and/or to extreme environmental conditions. view less | |
| Tinuvin® 5050 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 5050 is a liquid light stabilizer blend containing a benzotriazole-based UV absorber and a basic HALS for coatings, adhesives and sealants. It was designed to meet high performance and durability requirements of exterior solvent-based industrial,...view more Tinuvin® 5050 is a liquid light stabilizer blend containing a benzotriazole-based UV absorber and a basic HALS for coatings, adhesives and sealants. It was designed to meet high performance and durability requirements of exterior solvent-based industrial, architectural and decorative coatings. The UVA:HALS ratio chosen makes Tinuvin® 5050 especially suitable for clear coatings with a layer thickness from 40 – 80 µm and low pigmented coatings: general industrial coatings; architectural coatings; wood stains and varnishes, wood-care products; heavy-duty maintenance and marine coatings; adhesives and sealants. view less | |
| Tinuvin® 5060 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 5060 s a liquid light stabilizer blend containing a benzotriazole-based UV absorber and a non-basic HALS for coatings, adhesives and sealants. It was designed to fulfill the high performance and durability requirements of exterior solvent-based i...view more Tinuvin® 5060 s a liquid light stabilizer blend containing a benzotriazole-based UV absorber and a non-basic HALS for coatings, adhesives and sealants. It was designed to fulfill the high performance and durability requirements of exterior solvent-based industrial, architectural and decorative coatings. The UVA:HALS ratio chosen makes Tinuvin® 5060 especially suitable for clear coatings with a layer thickness from 40 – 80 µm and low pigmented coatings. view less | |
| Tinuvin® 5100 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 5100 is a liquid non-basic HALS for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of all exterior solvent-based industrial and architectural coatings where basic HALS...view more Tinuvin® 5100 is a liquid non-basic HALS for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of all exterior solvent-based industrial and architectural coatings where basic HALS fail. It protects coatings from surface defects such as gloss reduction, cracking and chalking and also improves the retention of mechanical properties. This amber to yellow liquid is especially designed for coatings where traditional basic HALS fail due to acid/base interactions and to protect other functional additives in coatings from weathering. view less | |
| Tinuvin® 5151 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 5151 is a liquid light stabilizer blend containing a benzotriazole-based UV absorber and a basic HALS for coatings, adhesives and sealants. It was designed to meet high performance and durability requirements of exterior solvent- and water-based ...view more Tinuvin® 5151 is a liquid light stabilizer blend containing a benzotriazole-based UV absorber and a basic HALS for coatings, adhesives and sealants. It was designed to meet high performance and durability requirements of exterior solvent- and water-based transportation, industrial, architectural and decorative coatings. This product is a viscous amber liquid. The UVA:HALS ratio chosen and the hydrophilic nature of the UV absorber used make Tinuvin® 5151 especially suitable for water- and solvent-based clear coatings with a layer thickness from 30 – 60 µm. view less | |
| Tinuvin® 5333 - DW | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 5333-DW is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer for coatings, adhesives, sealants and printing inks. It was designed to meet high performance and durability requirements of exterior water-ba...view more Tinuvin® 5333-DW is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer for coatings, adhesives, sealants and printing inks. It was designed to meet high performance and durability requirements of exterior water-based industrial and architectural coatings including radiation-curable systems (UV, electron beam). Tinuvin® 5333-DW is especially suitable for water-based acrylics and PUD dispersions with low- to zero-VOC requirement or where a traditional 2-(2-hydroxyphenyl)-benzotriazole UV absorber needs to be upgraded. view less | |
| Tinuvin® 5341 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 5341is a liquid light stabilizer blend developed specifically for coatings. Its high thermal stability and permanence makes it suitable for coatings exposed to high bake temperatures and/or extreme environmental conditions. It has been designed ...view more Tinuvin® 5341is a liquid light stabilizer blend developed specifically for coatings. Its high thermal stability and permanence makes it suitable for coatings exposed to high bake temperatures and/or extreme environmental conditions. It has been designed to fulfill the high performance and durability requirements of automotive and industrial high quality finishes. This viscous, yellowish liquid is recommended for automotive OEM and refinish coating systems as well as industrial coatings where high thermal stability and permanence along with long life performance are essential. These include acid catalyzed systems and particularly high solid one or two coat metallic thermosetting acrylics as well as polyester coatings. Tinuvin® 5341 combines excellent protection against gloss reduction, delamination, cracking, blistering and color change. view less | |
| Tinuvin® 900 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 900 is a solid benzotriazole-based UV absorber for coatings, printing and packaging, adhesives and sealants. It was designed to meet high performance and durability requirements of solvent-based industrial and powder coatings. | |
| Tinuvin® 928 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 928 is a solid benzotriazole-based UV absorber for coatings, printing and packaging, adhesives and sealants. It was designed to meet high performance and durability requirements of solvent-based automotive, industrial and powder coatings. This s...view more Tinuvin® 928 is a solid benzotriazole-based UV absorber for coatings, printing and packaging, adhesives and sealants. It was designed to meet high performance and durability requirements of solvent-based automotive, industrial and powder coatings. This slightly yellow powder is used in the following applications: automotive OEM and industrial high-temperature baking coatings; powder coatings; overprint varnishes over metal, board, paper, laminates; and adhesives and sealants. view less | |
| Tinuvin® 99-2 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 99-2 is a liquid benzotriazole-based UV absorber for coatings, adhesives and sealants. It was designed to meet performance and durability requirements of solvent-based industrial and architectural coatings including UV-curable systems. This brow...view more Tinuvin® 99-2 is a liquid benzotriazole-based UV absorber for coatings, adhesives and sealants. It was designed to meet performance and durability requirements of solvent-based industrial and architectural coatings including UV-curable systems. This brown to amber liquid is used in the following applications: general industrial coatings; architectural coatings; wood stains and varnishes, wood-care products; heavy-duty maintenance and marine coatings; and adhesives and sealants. view less | |
| Tinuvin® 99-DW | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® 99-DW s an aqueous benzotriazole-based UV absorber dispersion for coatings, adhesives and sealants. It was designed to meet medium to high performance and durability requirements of waterbased industrial and architectural coatings including UV-cu...view more Tinuvin® 99-DW s an aqueous benzotriazole-based UV absorber dispersion for coatings, adhesives and sealants. It was designed to meet medium to high performance and durability requirements of waterbased industrial and architectural coatings including UV-curable systems. This slightly yellow dispersion is especially suitable for all medium-performance water-based acrylic and PUD dispersions with low- to zero-VOC requirement where the use of benzotriazole UV absorbers is technically possible or where Tinuvin® 1130 is used and needs to be replaced due to labeling issues. view less | |
| Tinuvin® Carboprotect® | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Tinuvin® Carboprotect® is a solid very red-shifted benzotriazole-based UV absorber for coatings. It was especially designed for solvent-based clear or semi-transparent coatings over carbon-fiber-reinforced plastics (CFRP) or glass-fiber-reinforced plastic...view more Tinuvin® Carboprotect® is a solid very red-shifted benzotriazole-based UV absorber for coatings. It was especially designed for solvent-based clear or semi-transparent coatings over carbon-fiber-reinforced plastics (CFRP) or glass-fiber-reinforced plastics (GFRP) where fibers are embedded in an epoxy matrix. This yellow powder is used in coatings over carbon-fiber-reinforced plastics (CFRP) or glassfiber-reinforced plastics (GFRP) embedded in an epoxy matrix. It is also used in general for coatings or substrates needing protection up to 420 nm. This product is also used for coatings over substrates very sensitive to UV-A. view less |
