| Acronal® 296 D ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 296 D ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acr...view more Acronal® 296 D ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® 296 D ap are tack free at room temperature. Films formed by Acronal® 296 D ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. It is a general purpose binder, mainly used for the following applications: exterior paints, interior paints, plastic paints for interior application, textured finishes, primers for mineral substrates, and modifying silicate paints and finishes. view less | |
| Acronal® 296 DS ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 296 DS ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Non-pigmented films of ...view more Acronal® 296 DS ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Non-pigmented films of this product are tack-free at room temperature. Films formed by Acronal® 296 DS ap are clear, flexible, glossy, and have extremely high water resistance. They are also very resistant to saponification. view less | |
| Acronal® 7016 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal ® 7016 G is an anionic medium viscosity emulsion polymer. It consists of a small pure acrylic copolymer particles composed of an excellent outdoor durability and stain resistance. It enables the coating film to have good scrub resistance, blocking...view more Acronal ® 7016 G is an anionic medium viscosity emulsion polymer. It consists of a small pure acrylic copolymer particles composed of an excellent outdoor durability and stain resistance. It enables the coating film to have good scrub resistance, blocking resistance, and on the concrete surface good adhesion. view less | |
| Acronal® 7026 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7026 is a finely sized emulsion polymer with a low viscosity. The emulsion forms film, which are highly elastic over a broad temperature range, especially in the cold climate area. Its compatibility with fillers and pigments is excellent, and it ...view more Acronal® 7026 is a finely sized emulsion polymer with a low viscosity. The emulsion forms film, which are highly elastic over a broad temperature range, especially in the cold climate area. Its compatibility with fillers and pigments is excellent, and it has a very high pigment binding power. Films formed by Acronal® 7026 have excellent water, alkali and efflorescent resistance. Elastomeric wall coatings formulated with Acronal® 7026 provides hairline crack-bridging and due to UV-surface crosslinking technology it shows very good dirt pick-up resistance, even in warm and polluted environment. Acronal® 7026 is used to manufacture elastic coatings such as elastic top and mid coats, renderings and wall putty. Acronal® 7026 is suitable for premium elastic coatings in all polluted environment. view less | |
| Acronal® 7035 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7035 is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 has very high binding power for pigments and extenders therefore making it an excellent binder with superior scrub r...view more Acronal® 7035 is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 has very high binding power for pigments and extenders therefore making it an excellent binder with superior scrub resistance even formulated at very high PVC paint. Acronal® 7035 is ideal for use as interior emulsion paint with good scrub and water resistance. view less | |
| Acronal® 7035 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7035 G is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 G has very high binding power for pigments and extenders therefore making it an excellent binder with superior scr...view more Acronal® 7035 G is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 G has very high binding power for pigments and extenders therefore making it an excellent binder with superior scrub resistance even formulated at very high PVC paint. view less | |
| Acronal® 7037 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7037 is a non-APEO with low viscosity and is an anionic emulsion polymer. It consists of fine small emulsion particles. Acronal® 7037 has a high bond strength of pigments and fillers even if it is at a very high PVC. This product coatings have ou...view more Acronal® 7037 is a non-APEO with low viscosity and is an anionic emulsion polymer. It consists of fine small emulsion particles. Acronal® 7037 has a high bond strength of pigments and fillers even if it is at a very high PVC. This product coatings have outstanding scrub resistance. It has applications in exterior latex paint and has good scrub resistance. view less | |
| Acronal® 7051 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7051 is a finely divided polymer dispersion with a medium viscosity. It is a straight acrylic binder compatibility with the usual pigments and stones. It is also stable to high concentrations of calcium ions. It forms films that are tough, flexib...view more Acronal® 7051 is a finely divided polymer dispersion with a medium viscosity. It is a straight acrylic binder compatibility with the usual pigments and stones. It is also stable to high concentrations of calcium ions. It forms films that are tough, flexible and tack-free. Films formed by Acronal® 7051 have high water resistance and high lightfastness, and they are very resistant to saponification and weathering. They have very little tendency to blush, even if they are exposed to water for long periods. Acronal® 7051 is mainly used as a binder for textured and stones coatings with excellent blushing resistance. It can also be used for wood stains, wood paints, emulsion paints with a gloss or satin gloss finish, and plastic paints. view less | |
| Acronal® A 684 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural f...view more Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural finishes, wood paints, wood stains, latex paints, and textured finishes. view less | |
| Acronal® DS 6266 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® DS 6266 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles, and forms a clear transparent, tack free film. This product is distinguished by high resistance to blushing, low water absorption a...view more Acronal® DS 6266 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles, and forms a clear transparent, tack free film. This product is distinguished by high resistance to blushing, low water absorption and high weathering resistance. Acronal® DS 6266 ap is mainly used as a binder for exterior and flexible interior paints. view less | |
| Acronal® ECO 338 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 338 ap contains finely dispersed particles and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders. Films obtained from it are cl...view more Acronal® ECO 338 ap contains finely dispersed particles and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders. Films obtained from it are clear, flexible and glossy, and very resistant to water and hydrolysis. Acronal® ECO 338 ap is ideal for odorless paints. It is suitable for use in emulsion paints for interior or exterior. view less | |
| Acronal® ECO 502 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescin...view more Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescing agent in formulation. Films obtained from it are clear, flexible and glossy, and very resistant to water and hydrolysis. Acronal® ECO 502 ap is ideal for zero-low VOC and odorless paints. Its high pigment binding capacity makes it suitable for use in emulsion paints, smoothing fillers and textured finishes. Due to its high alkali resistance and compatibility with common potassium water glasses, Acronal® ECO 502 ap can also be utilized in silicate-based finishes. view less | |
| Acronal® ECO 612 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 612 ap is a full acrylic copolymer developed for flat to low sheen architectural paints. Paint formulated with Acronal® ECO 612 ap meets stringent performance requirements while keeping VOC content near zero. Due to its excellent adhesion and...view more Acronal® ECO 612 ap is a full acrylic copolymer developed for flat to low sheen architectural paints. Paint formulated with Acronal® ECO 612 ap meets stringent performance requirements while keeping VOC content near zero. Due to its excellent adhesion and block resistance, paint containing Acronal® ECO 612 ap is suitable for a wide range of surface types and applications. In addition, Acronal® ECO 612 ap showed excellent resistance to most common household stains. Acronal® ECO 612 ap is ideal for zero-low VOC and low odour paints. The dispersion allows you to formulate high quality matt to low sheen premium interior while meeting or exceeding VOC regulations. Due to its excellent washability, Acronal® ECO 612 ap based paint, allows most common household stains to be cleaned away with common detergents. view less | |
| Acronal® ECO 702 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 702 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of A...view more Acronal® ECO 702 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® ECO 702 ap are tack-free at room temperature. Films formed by Acronal® ECO 702 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. Acronal® ECO 702 AP is a general purpose binder for low odor, stain resistant interior paints. view less | |
| Acronal® ECO 9056 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 9056 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of ...view more Acronal® ECO 9056 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® ECO 9056 ap are tack-free at room temperature. Films formed by Acronal® ECO 9056 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. Acronal® ECO 9056 AP is a general purpose binder, mainly used for applications in interior low odor stains resistance paints and plastic paints for interior applications. view less | |
| Acronal® Flex SC 138 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® FLEX SC 138 ap is a finely divided emulsion polymer with a low viscosity. Its compatibility with fillers and pigments is excellent, and it has a very high pigment binding power. Films formed by Acronal® FLEX SC 138 have excellent water and alkali...view more Acronal® FLEX SC 138 ap is a finely divided emulsion polymer with a low viscosity. Its compatibility with fillers and pigments is excellent, and it has a very high pigment binding power. Films formed by Acronal® FLEX SC 138 have excellent water and alkali resistance and weatherability. Elastic wall coatings formulated with this product provide hairline crackbridging and have a very good dirt pick-up resistance, even in warm and polluted environment. Acronal® FLEX SC 138 ap is used to manufacture elastic coatings such as elastic top and mid coats, renderings and wall putty. Acronal® FLEX SC 138 ap is suitable for premium elastic coatings in warm and polluted environment. view less | |
| Acronal® GS 409 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® GS 409 ap is a low viscosity, small particle diameter of the polymer emulsion. It has excellent compatibility with the fillers and pigments, but also has an extremely high pigment adhesive force. The Acronal® GS 409 ap formulated elastomeric coat...view more Acronal® GS 409 ap is a low viscosity, small particle diameter of the polymer emulsion. It has excellent compatibility with the fillers and pigments, but also has an extremely high pigment adhesive force. The Acronal® GS 409 ap formulated elastomeric coatings bridge hairline cracks can provide, even in a warm environment and pollution, but also has excellent stain resistance. Acronal® GS 409 ap for the preparation of flexible architectural coatings, such as resilient topcoat and painted, clean surface mortar and putty. The Acronal GS 409 ap suitable quality elastomeric coatings prepared all contaminated environment. view less | |
| Acronal® JC 7043 X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® JC 7043 X an anionic R-C emulsion with very fine particle size and low viscosity. It is a long chain acrylics and styrene copolymer that exhibits excellent penetration into chalky or powdery surface and excellent alkali resistance that is a suita...view more Acronal® JC 7043 X an anionic R-C emulsion with very fine particle size and low viscosity. It is a long chain acrylics and styrene copolymer that exhibits excellent penetration into chalky or powdery surface and excellent alkali resistance that is a suitable for water based penetrating and alkali primer as alternative technology for solvent based. The polymer also impacts very good adhesion to powdery masonry surfaces. Acronal® JC 7043 is suited to manufacture All-in one water based primer. Acronal® JC 7043 X is used mainly for water based penetrating and alkali primers. view less | |
| Acronal® PA 510 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain prod...view more Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain produced with Acronal® PA 510 are therefore highly blocking- resistant and at the same time flexible. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate like aged alkyd resin paints. Acronal® PA 510 formulated high gloss coating provides high block resistant. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate especially to aged alkyd. view less | |
| Acronal® PA 807 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PA 807 ap is an anionic dispersion of medium viscosity. It consists of fine, well divided particles. It is a full acrylic copolymer that exhibits excellent exterior durability and good pick-up resistance. The polymer also impacts paint film prope...view more Acronal® PA 807 ap is an anionic dispersion of medium viscosity. It consists of fine, well divided particles. It is a full acrylic copolymer that exhibits excellent exterior durability and good pick-up resistance. The polymer also impacts paint film properties with good scrubability, blocking resistance, good adhesion to masonry surfaces and particularly good wet hiding. Acronal® PA 807 ap is suited to manufacture paints over a broad range of applications and can be formulated at different gloss levels. Acronal® PA 807 ap is used mainly for matt to gloss exterior finishes. view less | |
| Acronal® PS 791 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 791 ap is an anionic emulsion polymer with a low viscosity, consisting of small, finely divided particles. It has excellent compatibility with pigments and extenders, and very high binding power for pigments. Unpigmented films of Acronal® PS 7...view more Acronal® PS 791 ap is an anionic emulsion polymer with a low viscosity, consisting of small, finely divided particles. It has excellent compatibility with pigments and extenders, and very high binding power for pigments. Unpigmented films of Acronal® PS 791 ap are tack-free at room temperature. Films formed by Acronal® PS 791 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. This product is a general purpose binder, mainly used for the following applications: exterior paints; interior paints, plastic paints for interior application; textured finishes; primers for mineral substrates; and modifying silicate paints and finishes. view less | |
| Laromer® PO 94 F | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® PO 94 F is a multifunctional, polymeric amine modified polyether acrylate generally employed to boost the reactivity of both UV/EB inks and UV/EB overprint varnishes in graphic arts and of pigmented and non-pigmented UV/EB lacquers in wood coati...view more Laromer® PO 94 F is a multifunctional, polymeric amine modified polyether acrylate generally employed to boost the reactivity of both UV/EB inks and UV/EB overprint varnishes in graphic arts and of pigmented and non-pigmented UV/EB lacquers in wood coatings. This product is fully compatible with all common monomers and with all common oligomers like epoxy, polyester and urethane acrylates. It is soluble in many organic solvents like esters, ketones and aromatic hydrocarbons as used in UV spray coating applications for example. Laromer® PO 94 F provides superior film forming properties leading to tough, flexible coatings after UV/EB curing. It also features outstanding solvent fastness with high MEK and acetone resistance. This product is an excellent choice as sole binder for radiation curable clear coats, where fast curing speed, high gloss and low yellowing are required. Laromer® PO 94 F is particularly suitable as main binder or co-binder resin for UV/EB overprint varnishes as well as for UV/EB offset and UV flexo inks in food packaging applications, where low odour and a very low level of migratable species are required. view less | |
| Versamine® 911 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Versamine® 911 is a medium viscosity, fast-setting modified amine epoxy hardener designed for applications where blush-free surfaces with good flexibility are required. This product can be blended with Genamid®, Versamid® and select Versamine® epoxy harde...view more Versamine® 911 is a medium viscosity, fast-setting modified amine epoxy hardener designed for applications where blush-free surfaces with good flexibility are required. This product can be blended with Genamid®, Versamid® and select Versamine® epoxy hardeners to decrease set-times. Typical applications include 100% solid coatings, decorative fast-setting floors, and patching compounds. view less | |
| WorléeCryl® A 2141 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstandi...view more WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstanding gloss, hardness, chemical- and weather-resistance. Application fields for W´Cryl A 2141 are high solid paints for facade elements, caravans and plastics. view less | |
| WorléeCryl® A 2230 W | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2230 W is a hydroxy functional aqueous acrylic resin. This grade has a non volatile content of 44% ± 2. W´Cryl A 2230 W is a water emulsified hydroxyacrylate for the production of outdoor resistant isocyanate cross-linked two component top c...view more WorléeCryl® A 2230 W is a hydroxy functional aqueous acrylic resin. This grade has a non volatile content of 44% ± 2. W´Cryl A 2230 W is a water emulsified hydroxyacrylate for the production of outdoor resistant isocyanate cross-linked two component top coats with outstanding drying properties, film hardness and gloss. The isocyanate should be diluted with a solvent before mixing. view less | |
| WorléeCryl® A 2241 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2241 W is a hydroxy functional aqueous acrylic resin. This grade has a non volatile content of 45% ± 2. W´Cryl A 2241 W is a water emulsified hydroxyacrylate for the production of isocyanate cross-linked outdoor resistant two component top c...view more WorléeCryl® A 2241 W is a hydroxy functional aqueous acrylic resin. This grade has a non volatile content of 45% ± 2. W´Cryl A 2241 W is a water emulsified hydroxyacrylate for the production of isocyanate cross-linked outdoor resistant two component top coats which exhibit long pot-life, high gloss and good adhesion properties. The isocyanate should be diluted with a solvent before mixing. view less | |
| WorléeCryl® L 241 | Worlée-Chemie G.m.b.H. | WorléeCryl® L 241 is a neutral low odour acrylic resin, mainly for wall and ceiling paints. It has very good insulating coat properties for nicotine-, chimney- and water spots. W´Cryl L 241 is a soft acrylic resin. Additional plasticizers are not necessar...view more WorléeCryl® L 241 is a neutral low odour acrylic resin, mainly for wall and ceiling paints. It has very good insulating coat properties for nicotine-, chimney- and water spots. W´Cryl L 241 is a soft acrylic resin. Additional plasticizers are not necessary. It has a non-volatile content of 60% ± 1. view less | |
| WorléeCryl® L 2822 | Worlée-Chemie G.m.b.H. | WorléeCryl® L 2822 is a neutral, physically drying, low odour acrylic resin, mainly for the use in wall and ceiling paints. | |
| WorléeDur D 46 | Worlée-Chemie G.m.b.H. | WorléeDur D 46 is a short oil epoxy ester based on conjugated drying fatty acids. It is used in air-drying and stoving finishes with outstanding adhesion, rapid drying and good chemical resistance. W´Dur D 46 is compatible with unplasticized urea and mela...view more WorléeDur D 46 is a short oil epoxy ester based on conjugated drying fatty acids. It is used in air-drying and stoving finishes with outstanding adhesion, rapid drying and good chemical resistance. W´Dur D 46 is compatible with unplasticized urea and melamine formaldehyde resins. W´Dur D 46 is an excellent binder for quick-drying primers and top-coats with very good adhesion and chemical resistance. Zinc-rich primers based on W´Dur D 46 have very good stability and anticorrosive properties. view less | |
| WorléeDur D 6311 (60% In Dearomatized HC 140-165) | Worlée-Chemie G.m.b.H. | WorléeDur D 6311 (60% In Dearomatized HC 140-165) is an air drying long oil, modified epoxy ester used for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could bec...view more WorléeDur D 6311 (60% In Dearomatized HC 140-165) is an air drying long oil, modified epoxy ester used for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become worse. Primers based on W´Dur D 6311 show good application properties (brush application), good flow and good adhesion properties. view less | |
| WorléeDur D 6311 (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeDur D 6311 (60% In Dearomatized HC 160-200) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become w...view more WorléeDur D 6311 (60% In Dearomatized HC 160-200) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become worse. Primers based on W´Dur D 6311 show good application properties (brush application), good flow and good adhesion properties. view less | |
| WorléeDur D 6311 (60% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeDur D 6311 (60% In White Spirit 145-195) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become wors...view more WorléeDur D 6311 (60% In White Spirit 145-195) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become worse. Primers based on W´Dur D 6311 show good application properties (brush application), good flow and good adhesion properties. view less | |
| WorléeKyd B 865 U NV | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U NV is an isocyanate modified, long oil alkyd. This grade has a non volatile content of 60% ± 1. W´Kyd B 865 U nv is mainly recommended as the only binder or in combination with long oil alkyd resins for wood varnishes, parquet sealers, p...view more WorléeKyd B 865 U NV is an isocyanate modified, long oil alkyd. This grade has a non volatile content of 60% ± 1. W´Kyd B 865 U nv is mainly recommended as the only binder or in combination with long oil alkyd resins for wood varnishes, parquet sealers, primers, undercoat lacquers and fast drying top coats. view less | |
| WorléeKyd B 870 (73%-77% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeKyd B 870 (73%-77% In Isoparaffin HC 170-200) is a long oil, low viscosity, drying alkyd for use in high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 2. Due to the low viscosity and very good pigment wetting proper...view more WorléeKyd B 870 (73%-77% In Isoparaffin HC 170-200) is a long oil, low viscosity, drying alkyd for use in high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 2. Due to the low viscosity and very good pigment wetting properties, the gloss paints based on W´Kyd B 870 have excellent brushability, high film build, very good levelling properties and high gloss and gloss retention. view less | |
| WorléeKyd B 870 (75% In Dearomat. HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd B 870 (75% In Dearomat. HC 160-200) is a long oil, low-viscosity drying alkyd based on vegetable fatty acids for high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 2. W´Kyd B 870 is compatible with most medium a...view more WorléeKyd B 870 (75% In Dearomat. HC 160-200) is a long oil, low-viscosity drying alkyd based on vegetable fatty acids for high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 2. W´Kyd B 870 is compatible with most medium and long oil drying alkyds, with most usual hard resins and also with raw and polymerised oils. W´Kyd B 870 is especially developed for high quality non-yellowing gloss paints, such as all sorts of decorative and trade sales paints. view less | |
| WorléeKyd B 870 (75% In DH 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd B 870 (75% In DH 180-220) is a long oil, low-viscosity drying alkyd based on vegetable fatty acids for high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 1. W´Kyd B 870 is compatible with most medium and long oi...view more WorléeKyd B 870 (75% In DH 180-220) is a long oil, low-viscosity drying alkyd based on vegetable fatty acids for high quality air drying gloss paints. This grade has a non-volatile content of 75% ± 1. W´Kyd B 870 is compatible with most medium and long oil drying alkyds, with most usual hard resins and also with raw and polymerised oils. This product is especially developed for high quality non-yellowing gloss paints, such as all sorts of decorative and trade sales paints. view less | |
| WorléeKyd BS 830 (60% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd BS 830 (60% In White Spirit 145-195) is an air drying silicone modified alkyd resin used for the manufacture of lasting protection coatings for steel construction. This grade has a non-volatile content of 60% ±1. W´Kyd BS 830 is recommended as t...view more WorléeKyd BS 830 (60% In White Spirit 145-195) is an air drying silicone modified alkyd resin used for the manufacture of lasting protection coatings for steel construction. This grade has a non-volatile content of 60% ±1. W´Kyd BS 830 is recommended as the only binder or in combination with conventional long and medium oil alkyd resins for the manufacture of high quality industrial and decorative paints. view less | |
| WorléeKyd S 351 (60% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351 (60% In Dearomatized HC 180-220) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatibl...view more WorléeKyd S 351 (60% In Dearomatized HC 180-220) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. view less | |
| WorléeKyd S 351(50% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351(50% In Isoparaffin HC 170-200) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. It has an oil content of approx. 51%....view more WorléeKyd S 351(50% In Isoparaffin HC 170-200) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. It has an oil content of approx. 51%. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. view less | |
| WorléeKyd S 351(50% In White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeKyd S 351(50% In White Spirit 180-210) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible wi...view more WorléeKyd S 351(50% In White Spirit 180-210) is a medium oil, air drying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 351 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 351 is partially compatible with low viscous stand oils. view less | |
| WorléeKyd S 5101 | Worlée-Chemie G.m.b.H. | WorléeKyd S 5101 is a medium oil, airdrying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 5101 is completely compatible with most airdrying medium and...view more WorléeKyd S 5101 is a medium oil, airdrying alkyd resin used for the manufacture of fillers with structural viscosity for brushing, primer surfacers, and semi-gloss and flat wall paints. W´Kyd S 5101 is completely compatible with most airdrying medium and long oil alkyd resins, with maleic resins and phenolic modified rosins, with raw oils and chlorinated rubber. W´Kyd S 5101 is partially compatible with low viscous stand oils. view less | |
| WorléeKyd S 5703 (55% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 5703 (55% In Dearomatized HC 160-200) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. W´Kyd S 5703 is compatible with the majori...view more WorléeKyd S 5703 (55% In Dearomatized HC 160-200) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. W´Kyd S 5703 is compatible with the majority of medium and long oil types of air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeKyd S 5703 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd S 5703 (55% In White Spirit 145-195) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. This grade has a non volatile content of 55% ...view more WorléeKyd S 5703 (55% In White Spirit 145-195) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. This grade has a non volatile content of 55% ± 1. Varnishes based on W´Kyd S 5703 are fast drying with a high degree of hardness and good gloss. view less | |
| WorléeKyd S 6003 (50% Iin Isoparaffinic HC 150-180) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 (50% In Isoparaffinic HC 150-180) is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats.. This grade has a non volat...view more WorléeKyd S 6003 (50% In Isoparaffinic HC 150-180) is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats.. This grade has a non volatile content of 50% ± 1. view less | |
| WorléeKyd S 6003 (51% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile...view more WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 51% ± 1. W´Kyd S 6003 is compatible with the majority of medium and long oil types air-drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeKyd S 6003 hv | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 hv is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd S ...view more WorléeKyd S 6003 hv is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd S 6003 hv is compatible with the majority of medium and long oil types air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeKyd S 6400 HV (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6400 HV (60% In Dearomatized HC 160-200) is a long oil drying alkyd for the production of decorative finishes and general purpose exterior and interior paints. This grade has a non volatile content of 60% ± 1. W´Kyd S 6400 hv is especially sui...view more WorléeKyd S 6400 HV (60% In Dearomatized HC 160-200) is a long oil drying alkyd for the production of decorative finishes and general purpose exterior and interior paints. This grade has a non volatile content of 60% ± 1. W´Kyd S 6400 hv is especially suitable for the manufacture of consumption, exterior quality house, do-it-yourself and anticorrosive paints. view less | |
| WorléeKyd S 6400 HV (60% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6400 HV (60% In Dearomatized HC 180-220) is a long oil drying alkyd for the production of decorative finishes and general purpose exterior and interior paints. This grade has a non volatile content of 60% ± 1. W´Kyd S 6400 hv is especially sui...view more WorléeKyd S 6400 HV (60% In Dearomatized HC 180-220) is a long oil drying alkyd for the production of decorative finishes and general purpose exterior and interior paints. This grade has a non volatile content of 60% ± 1. W´Kyd S 6400 hv is especially suitable for the manufacture of consumption, exterior quality house, do-it-yourself and anticorrosive paints. view less | |
| WorléeKyd S 7304 | Worlée-Chemie G.m.b.H. | WorléeKyd S 7304 is a low viscosity soya oil-based alkyd resin. It is used for the production of high solid paint systems. W´Kyd S 7304 is compatible with most air-drying medium and long oil alkyd resins. It is particularly suitable for the manufacturing ...view more WorléeKyd S 7304 is a low viscosity soya oil-based alkyd resin. It is used for the production of high solid paint systems. W´Kyd S 7304 is compatible with most air-drying medium and long oil alkyd resins. It is particularly suitable for the manufacturing of high solid glazings, clear lacquers and high solid anticorrosion primers. view less | |
| WorléeKyd SD 6403 | Worlée-Chemie G.m.b.H. | WorléeKyd SD 6403 is a urethane modified long oil alkyd resin used for the manufacture of interior and exterior wood varnishes for floors, furniture, panelings and yacht finishes. It is also recommended as a binder for high quality fast drying primers and...view more WorléeKyd SD 6403 is a urethane modified long oil alkyd resin used for the manufacture of interior and exterior wood varnishes for floors, furniture, panelings and yacht finishes. It is also recommended as a binder for high quality fast drying primers and topcoats with good gloss and gloss retention.This grade has a non volatile content of 55% ± 1. view less | |
| WorléeKyd SD 7003 | Worlée-Chemie G.m.b.H. | WorléeKyd SD 7003 is a low viscous, long oil air drying alkyd resin for the production of low VOC decorative and house paints. This grade has a non volatile content of 85% ± 1. W´Kyd SD 7003 is well soluble in aromatic and aliphatic hydrocarbons and in de...view more WorléeKyd SD 7003 is a low viscous, long oil air drying alkyd resin for the production of low VOC decorative and house paints. This grade has a non volatile content of 85% ± 1. W´Kyd SD 7003 is well soluble in aromatic and aliphatic hydrocarbons and in dearomatized white spirits and isoparaffines. view less | |
| WorléeKyd T 768 | Worlée-Chemie G.m.b.H. | WorléeKyd T 768 is a long oil, air drying alkyd resin, produced from tall oil fatty acids. This grade has a non volatile content of 75% ± 1. W´Kyd T 768 is especially suitable for the manufacturing of decorative, do-it-yourself and anticorrosive paints. | |
| WorléePol® V 450 | Worlée-Chemie G.m.b.H. | WorléePol® V 450 is a water thinnable, low viscous, high reactive polyester resin without amine addition. It is used for the manufacture of water thinnable, acid curing impregnations and lacquers for wood decoration foils. W´Pol V 450 is used as a plastic...view more WorléePol® V 450 is a water thinnable, low viscous, high reactive polyester resin without amine addition. It is used for the manufacture of water thinnable, acid curing impregnations and lacquers for wood decoration foils. W´Pol V 450 is used as a plasticizer. Due to the high reactivity it is possible to cure application quantities of approx. 25 g/m² wet film during 20 - 30 s at approx. 140 °C or 40 - 60 s at approx. 130 °C and excellent resistance properties are achieved. view less | |
| WorléeSin PM 200 | Worlée-Chemie G.m.b.H. | WorléeSin PM 200 is a low viscous pentaerythritol resin for decorative and industrial paints as well as high concentrated pigment pastes. W´Sin PM 200 is compatible with non drying and with drying short, medium and long oil alkyds. W´Sin PM 200 is added t...view more WorléeSin PM 200 is a low viscous pentaerythritol resin for decorative and industrial paints as well as high concentrated pigment pastes. W´Sin PM 200 is compatible with non drying and with drying short, medium and long oil alkyds. W´Sin PM 200 is added to air drying decorative, house, DIY paints and to industrial coatings for improving hardness, gloss and solids content. Due to its low viscosity, good pigment wetting and very good compatibility, W´Sin PM 200 is also used for production of high concentrated solvent-based pigment pastes. view less | |
| WorléeSol E 150 W | Worlée-Chemie G.m.b.H. | WorléeSol E 150 W is a medium oil alkyd emulsion designed for the manufacture of air drying water thinnable high gloss top coats. This grade has a non volatile content of 40% ± 2. Top coats with high gloss, excellent hardness and very good water resistanc...view more WorléeSol E 150 W is a medium oil alkyd emulsion designed for the manufacture of air drying water thinnable high gloss top coats. This grade has a non volatile content of 40% ± 2. Top coats with high gloss, excellent hardness and very good water resistance can be formulated. Furthermore, a good outdoor resistance can occur. Other application fields for W´Sol E 150 W are air drying decorative, house and DIY-paints as well as wood protective glazings. view less | |
| WorléeSol NW 474 | Worlée-Chemie G.m.b.H. | WorléeSol NW 474 is a long oil amine and co-solvent free alkyd emulsion. This grade has a non volatile content of 60% ± 2. W´Sol NW 474 is suitable for the manufacture of wood impregnations and -glazings. A further application field for W´Sol NW 474 is op...view more WorléeSol NW 474 is a long oil amine and co-solvent free alkyd emulsion. This grade has a non volatile content of 60% ± 2. W´Sol NW 474 is suitable for the manufacture of wood impregnations and -glazings. A further application field for W´Sol NW 474 is open time and body improvement of decorative and house paints based on W´Sol E 150 W by addition of 3 - 10 % on total formulation. view less | |
| WorléeSol SE 420 W | Worlée-Chemie G.m.b.H. | WorléeSol SE 420 W is a medium oil, silicone modified, cosolvent-free alkyd emulsion, especially designed for the manufacture of airdrying water thinnable high gloss top coats. W´Sol SE 420 W mostly is used for the production of high- and silk-gloss paint...view more WorléeSol SE 420 W is a medium oil, silicone modified, cosolvent-free alkyd emulsion, especially designed for the manufacture of airdrying water thinnable high gloss top coats. W´Sol SE 420 W mostly is used for the production of high- and silk-gloss paints for the d.i.y and decorative range. The very good QUV-A fast weathering results and 3 years outdoor resistance test without any considerable gloss loss are further characteristics of W´Sol SE 420 W. view less | |
| WorléeThix 670 HS | Worlée-Chemie G.m.b.H. | WorléeThix 670 HS is a thixotropic long oil alkyd resin, mainly for the manufacture of primers, filler, gloss paints, and silk gloss paints. This grade has a low VOC and a non volatile content of 70% ± 2. W´Thix 670 hs is compatible with most medium and l...view more WorléeThix 670 HS is a thixotropic long oil alkyd resin, mainly for the manufacture of primers, filler, gloss paints, and silk gloss paints. This grade has a low VOC and a non volatile content of 70% ± 2. W´Thix 670 hs is compatible with most medium and long oil air drying alkyd resins. It is also compatible with the common maleic and phenolic modified hard resins. Main application fields are high solid, solvent based, air drying primers, gloss paints, silk gloss paints and glazings for decorative paints, especially with regard to the stricter VOC limit values from 2010 on. W´Thix 670 hs can be used either as a sole binder or as an additional binder (e. g. in combination with W´Kyd SD 7003, 85% in dearomatized HC 160-200). view less | |
| WorléeThix A 2125 | Worlée-Chemie G.m.b.H. | WorléeThix A 2125 is a thixotropic, isocyanate crosslinkable acrylic resin. This grade has a non volatile content of 50% ± 2. W´Thix A 2125 can be crosslinked with aliphatic and aromatic polyisocyanates to formulate air and forced drying systems for metal...view more WorléeThix A 2125 is a thixotropic, isocyanate crosslinkable acrylic resin. This grade has a non volatile content of 50% ± 2. W´Thix A 2125 can be crosslinked with aliphatic and aromatic polyisocyanates to formulate air and forced drying systems for metal, wood and plastics. The aliphatic system shows excellent hardness, good chemical resistance and a good outdoor durability already at room temperature. W´Thix A 2125 is suitable for many industrial applications such as agricultural equipment, construction trucks, and plastic coatings. This product is also used to formulate decorative effect coatings view less | |
| WorléeThix A 2242 W | Worlée-Chemie G.m.b.H. | WorléeThix A 2242 W is a thixotropic emulsion of an styrene acrylate polymerized with solvents. This grade has a non volatile content of 58% ± 2. W´Thix A 2242 W is used alone or in combination with W´Cryl A 2242 W for the manufacture of outdoor resistan...view more WorléeThix A 2242 W is a thixotropic emulsion of an styrene acrylate polymerized with solvents. This grade has a non volatile content of 58% ± 2. W´Thix A 2242 W is used alone or in combination with W´Cryl A 2242 W for the manufacture of outdoor resistant top coats and effect coats. view less | |
| WorléeThix A 2313 | Worlée-Chemie G.m.b.H. | WorléeThix A 2313 is a thixotropic acrylic resin which can be crosslinked with isocyanates. This grade has a non volatile content of 60 % ± 2. W´Thix A 2313 can be used as a sole binder or in combination with other hydroxy acrylates for the manufacture of...view more WorléeThix A 2313 is a thixotropic acrylic resin which can be crosslinked with isocyanates. This grade has a non volatile content of 60 % ± 2. W´Thix A 2313 can be used as a sole binder or in combination with other hydroxy acrylates for the manufacture of air and forced drying industrial paints. Even at room temperature paint films show high hardness, chemical resistance and very good weather resistance. Application fields for W´Thix A 2313 are coatings of front elements and plastic coatings. W´Thix A 2313 can also be used for formulating decorative effect finishes. view less | |
| WorléeThix S 6357 | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 is a long oil thixotropic alkyd resin. This grade has a non volatile content of 45% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. W´Thix S 6357 is especially suitable for the manufacture of anticorrosi...view more WorléeThix S 6357 is a long oil thixotropic alkyd resin. This grade has a non volatile content of 45% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. W´Thix S 6357 is especially suitable for the manufacture of anticorrosive primers, decorative and building paints as well as thick layer wood glazings. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| WorléeThix S 6357 (40% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In Dearomatized HC 180-220) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W...view more WorléeThix S 6357 (40% In Dearomatized HC 180-220) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. view less | |
| WorléeThix S 6357 (40% In White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Th...view more WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| WorléeThix S 6358 | Worlée-Chemie G.m.b.H. | WorléeThix S 6358 is a long oil thixotropic alkyd resin. With the addition of polar solvents and heat the soft gel structure is not totally degradable. This grade has a non volatile content of 50% ± 2. It is used for the manufacture of anticorrosive prime...view more WorléeThix S 6358 is a long oil thixotropic alkyd resin. With the addition of polar solvents and heat the soft gel structure is not totally degradable. This grade has a non volatile content of 50% ± 2. It is used for the manufacture of anticorrosive primers, decorative and building paints as well as wood glazings. W´Thix S 6358 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| WorléeThix V 747 (50%-54% Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix V 747 (50%-54% Dearomatized HC 180-220) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of 52...view more WorléeThix V 747 (50%-54% Dearomatized HC 180-220) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of 52% ± 2. All these paint systems show very good application properties while brushing rolling and spraying. W´Thix V 747 avoids sagging from vertical surfaces. view less | |
| WorléeThix V 747 (50%-54% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 747 (50%-54% In Isoparaffin HC 170-200) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of ...view more WorléeThix V 747 (50%-54% In Isoparaffin HC 170-200) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of 52% ± 2. With the addition of W´Thix V 747, thick layer anti corrosion systems for the heavy corrosion protection can be produced. view less |
