| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division 巴斯夫中间体 | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division 巴斯夫中间体 | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division 巴斯夫中间体 | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division 巴斯夫中间体 | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division 巴斯夫中间体 | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division 巴斯夫中间体 | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division 巴斯夫中间体 | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division 巴斯夫中间体 | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division 巴斯夫中间体 | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division 巴斯夫中间体 | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division 巴斯夫中间体 | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division 巴斯夫中间体 | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division 巴斯夫中间体 | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division 巴斯夫中间体 | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division 巴斯夫中间体 | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| Acronal® 296 D ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 296 D ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acr...view more Acronal® 296 D ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® 296 D ap are tack free at room temperature. Films formed by Acronal® 296 D ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. It is a general purpose binder, mainly used for the following applications: exterior paints, interior paints, plastic paints for interior application, textured finishes, primers for mineral substrates, and modifying silicate paints and finishes. view less | |
| Acronal® 296 DS ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 296 DS ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Non-pigmented films of ...view more Acronal® 296 DS ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Non-pigmented films of this product are tack-free at room temperature. Films formed by Acronal® 296 DS ap are clear, flexible, glossy, and have extremely high water resistance. They are also very resistant to saponification. view less | |
| Acronal® 7015 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal ® 7015 is a finely dispersed emulsion polymer that has a medium viscosity. It is a fill with good bond force. It has good flexibility and anti-sticky features on the film. | |
| Acronal® 7016 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal ® 7016 G is an anionic medium viscosity emulsion polymer. It consists of a small pure acrylic copolymer particles composed of an excellent outdoor durability and stain resistance. It enables the coating film to have good scrub resistance, blocking...view more Acronal ® 7016 G is an anionic medium viscosity emulsion polymer. It consists of a small pure acrylic copolymer particles composed of an excellent outdoor durability and stain resistance. It enables the coating film to have good scrub resistance, blocking resistance, and on the concrete surface good adhesion. view less | |
| Acronal® 7026 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7026 is a finely sized emulsion polymer with a low viscosity. The emulsion forms film, which are highly elastic over a broad temperature range, especially in the cold climate area. Its compatibility with fillers and pigments is excellent, and it ...view more Acronal® 7026 is a finely sized emulsion polymer with a low viscosity. The emulsion forms film, which are highly elastic over a broad temperature range, especially in the cold climate area. Its compatibility with fillers and pigments is excellent, and it has a very high pigment binding power. Films formed by Acronal® 7026 have excellent water, alkali and efflorescent resistance. Elastomeric wall coatings formulated with Acronal® 7026 provides hairline crack-bridging and due to UV-surface crosslinking technology it shows very good dirt pick-up resistance, even in warm and polluted environment. Acronal® 7026 is used to manufacture elastic coatings such as elastic top and mid coats, renderings and wall putty. Acronal® 7026 is suitable for premium elastic coatings in all polluted environment. view less | |
| Acronal® 7026 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7026 G is an emulsion polymer that has low viscosity and a small particle size. Films created by this product can maintain good flexibility under various temperature conditions, especially in cold climates. It has a strong carrying capacity and v...view more Acronal® 7026 G is an emulsion polymer that has low viscosity and a small particle size. Films created by this product can maintain good flexibility under various temperature conditions, especially in cold climates. It has a strong carrying capacity and very good compatibility with pigments and fillers. It has excellent water, alkali, and weathering properties, and used for elastic wall paint formulated with a subtle crack bridging function. Because of the use of surface UV cross-linking technology, even in hot weather and polluted environments, this product shows strong stain resistance properties. view less | |
| Acronal® 7035 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7035 is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 has very high binding power for pigments and extenders therefore making it an excellent binder with superior scrub r...view more Acronal® 7035 is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 has very high binding power for pigments and extenders therefore making it an excellent binder with superior scrub resistance even formulated at very high PVC paint. Acronal® 7035 is ideal for use as interior emulsion paint with good scrub and water resistance. view less | |
| Acronal® 7035 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7035 G is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 G has very high binding power for pigments and extenders therefore making it an excellent binder with superior scr...view more Acronal® 7035 G is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 G has very high binding power for pigments and extenders therefore making it an excellent binder with superior scrub resistance even formulated at very high PVC paint. view less | |
| Acronal® 7037 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7037 is a non-APEO with low viscosity and is an anionic emulsion polymer. It consists of fine small emulsion particles. Acronal® 7037 has a high bond strength of pigments and fillers even if it is at a very high PVC. This product coatings have ou...view more Acronal® 7037 is a non-APEO with low viscosity and is an anionic emulsion polymer. It consists of fine small emulsion particles. Acronal® 7037 has a high bond strength of pigments and fillers even if it is at a very high PVC. This product coatings have outstanding scrub resistance. It has applications in exterior latex paint and has good scrub resistance. view less | |
| Acronal® 7051 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® 7051 is a finely divided polymer dispersion with a medium viscosity. It is a straight acrylic binder compatibility with the usual pigments and stones. It is also stable to high concentrations of calcium ions. It forms films that are tough, flexib...view more Acronal® 7051 is a finely divided polymer dispersion with a medium viscosity. It is a straight acrylic binder compatibility with the usual pigments and stones. It is also stable to high concentrations of calcium ions. It forms films that are tough, flexible and tack-free. Films formed by Acronal® 7051 have high water resistance and high lightfastness, and they are very resistant to saponification and weathering. They have very little tendency to blush, even if they are exposed to water for long periods. Acronal® 7051 is mainly used as a binder for textured and stones coatings with excellent blushing resistance. It can also be used for wood stains, wood paints, emulsion paints with a gloss or satin gloss finish, and plastic paints. view less | |
| Acronal® A 684 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural f...view more Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural finishes, wood paints, wood stains, latex paints, and textured finishes. view less | |
| Acronal® CN 18 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® CN 18 ap is a formaldehyde free medium viscosity fine dispersion. The dispersion’s compatibility with extenders and pigment binding properties are excellent. The film is clear, glossy, flexible and exhibits exceptional resistance to water and sap...view more Acronal® CN 18 ap is a formaldehyde free medium viscosity fine dispersion. The dispersion’s compatibility with extenders and pigment binding properties are excellent. The film is clear, glossy, flexible and exhibits exceptional resistance to water and saponification. view less | |
| Acronal® DS 6266 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® DS 6266 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles, and forms a clear transparent, tack free film. This product is distinguished by high resistance to blushing, low water absorption a...view more Acronal® DS 6266 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles, and forms a clear transparent, tack free film. This product is distinguished by high resistance to blushing, low water absorption and high weathering resistance. Acronal® DS 6266 ap is mainly used as a binder for exterior and flexible interior paints. view less | |
| Acronal® ECO 338 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 338 ap contains finely dispersed particles and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders. Films obtained from it are cl...view more Acronal® ECO 338 ap contains finely dispersed particles and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders. Films obtained from it are clear, flexible and glossy, and very resistant to water and hydrolysis. Acronal® ECO 338 ap is ideal for odorless paints. It is suitable for use in emulsion paints for interior or exterior. view less | |
| Acronal® ECO 502 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescin...view more Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescing agent in formulation. Films obtained from it are clear, flexible and glossy, and very resistant to water and hydrolysis. Acronal® ECO 502 ap is ideal for zero-low VOC and odorless paints. Its high pigment binding capacity makes it suitable for use in emulsion paints, smoothing fillers and textured finishes. Due to its high alkali resistance and compatibility with common potassium water glasses, Acronal® ECO 502 ap can also be utilized in silicate-based finishes. view less | |
| Acronal® ECO 612 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 612 ap is a full acrylic copolymer developed for flat to low sheen architectural paints. Paint formulated with Acronal® ECO 612 ap meets stringent performance requirements while keeping VOC content near zero. Due to its excellent adhesion and...view more Acronal® ECO 612 ap is a full acrylic copolymer developed for flat to low sheen architectural paints. Paint formulated with Acronal® ECO 612 ap meets stringent performance requirements while keeping VOC content near zero. Due to its excellent adhesion and block resistance, paint containing Acronal® ECO 612 ap is suitable for a wide range of surface types and applications. In addition, Acronal® ECO 612 ap showed excellent resistance to most common household stains. Acronal® ECO 612 ap is ideal for zero-low VOC and low odour paints. The dispersion allows you to formulate high quality matt to low sheen premium interior while meeting or exceeding VOC regulations. Due to its excellent washability, Acronal® ECO 612 ap based paint, allows most common household stains to be cleaned away with common detergents. view less | |
| Acronal® ECO 702 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 702 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of A...view more Acronal® ECO 702 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® ECO 702 ap are tack-free at room temperature. Films formed by Acronal® ECO 702 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. Acronal® ECO 702 AP is a general purpose binder for low odor, stain resistant interior paints. view less | |
| Acronal® ECO 7078 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 7078 contains finely dispersed particles and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent stains & scrub resistance in widely used interior paint formulations. It is suitable to...view more Acronal® ECO 7078 contains finely dispersed particles and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent stains & scrub resistance in widely used interior paint formulations. It is suitable to formulate paint to comply new GB/T 9780 test method. view less | |
| Acronal® ECO 9056 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 9056 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of ...view more Acronal® ECO 9056 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® ECO 9056 ap are tack-free at room temperature. Films formed by Acronal® ECO 9056 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. Acronal® ECO 9056 AP is a general purpose binder, mainly used for applications in interior low odor stains resistance paints and plastic paints for interior applications. view less | |
| Acronal® Flex SC 138 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® FLEX SC 138 ap is a finely divided emulsion polymer with a low viscosity. Its compatibility with fillers and pigments is excellent, and it has a very high pigment binding power. Films formed by Acronal® FLEX SC 138 have excellent water and alkali...view more Acronal® FLEX SC 138 ap is a finely divided emulsion polymer with a low viscosity. Its compatibility with fillers and pigments is excellent, and it has a very high pigment binding power. Films formed by Acronal® FLEX SC 138 have excellent water and alkali resistance and weatherability. Elastic wall coatings formulated with this product provide hairline crackbridging and have a very good dirt pick-up resistance, even in warm and polluted environment. Acronal® FLEX SC 138 ap is used to manufacture elastic coatings such as elastic top and mid coats, renderings and wall putty. Acronal® FLEX SC 138 ap is suitable for premium elastic coatings in warm and polluted environment. view less | |
| Acronal® GS 409 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® GS 409 ap is a low viscosity, small particle diameter of the polymer emulsion. It has excellent compatibility with the fillers and pigments, but also has an extremely high pigment adhesive force. The Acronal® GS 409 ap formulated elastomeric coat...view more Acronal® GS 409 ap is a low viscosity, small particle diameter of the polymer emulsion. It has excellent compatibility with the fillers and pigments, but also has an extremely high pigment adhesive force. The Acronal® GS 409 ap formulated elastomeric coatings bridge hairline cracks can provide, even in a warm environment and pollution, but also has excellent stain resistance. Acronal® GS 409 ap for the preparation of flexible architectural coatings, such as resilient topcoat and painted, clean surface mortar and putty. The Acronal GS 409 ap suitable quality elastomeric coatings prepared all contaminated environment. view less | |
| Acronal® IA734 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® IA734 ap is a straight acrylic anionic emulsion polymer, which is specially designed for premium exterior applications. The fina particle size with narrow particle size distribution of the polymer ensures good adhesion. The cross linking gives ...view more Acronal® IA734 ap is a straight acrylic anionic emulsion polymer, which is specially designed for premium exterior applications. The fina particle size with narrow particle size distribution of the polymer ensures good adhesion. The cross linking gives best of the mechanical properties without compromising on dirt pick up resistance. It is free from plasticisers and solvents. view less | |
| Acronal® JC 7043 X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® JC 7043 X an anionic R-C emulsion with very fine particle size and low viscosity. It is a long chain acrylics and styrene copolymer that exhibits excellent penetration into chalky or powdery surface and excellent alkali resistance that is a suita...view more Acronal® JC 7043 X an anionic R-C emulsion with very fine particle size and low viscosity. It is a long chain acrylics and styrene copolymer that exhibits excellent penetration into chalky or powdery surface and excellent alkali resistance that is a suitable for water based penetrating and alkali primer as alternative technology for solvent based. The polymer also impacts very good adhesion to powdery masonry surfaces. Acronal® JC 7043 is suited to manufacture All-in one water based primer. Acronal® JC 7043 X is used mainly for water based penetrating and alkali primers. view less | |
| Acronal® LR8977 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® LR8977 is a self-crosslinking acrylic emulsion for anti-corrosion coatings, and is also suitable for industrial coaitngs. It has good block resistance, high pigment load (PVC 35 %).APEO-free, and good anti-corrosion protection with anti corrosive...view more Acronal® LR8977 is a self-crosslinking acrylic emulsion for anti-corrosion coatings, and is also suitable for industrial coaitngs. It has good block resistance, high pigment load (PVC 35 %).APEO-free, and good anti-corrosion protection with anti corrosive pigments. view less | |
| Acronal® NX 3587 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® NX 3587 is an aqueous acrylic dispersion for flexible roof coating. It is a newly developed polymer from BASF to address many concerns in the Flexible Roof Coating industry. First, it is a pure acrylic polymer which contains crosslinking function...view more Acronal® NX 3587 is an aqueous acrylic dispersion for flexible roof coating. It is a newly developed polymer from BASF to address many concerns in the Flexible Roof Coating industry. First, it is a pure acrylic polymer which contains crosslinking functionalities which not only improve polymer tensile properties, but improve substrate adhesion properties especially on polyurethane. Second, is that Acronal® NX 3587 was developed to address asphalt bleed resistance when applied as a white coating over an asphaltic substrate. It shows virtually no asphalt bleed-through when tested under both UV and Heat (50°C) conditions. Lastly, when this product is compounded into a typical 42 pvc Flexible Roof Coating formulation, it shows very low water absorbance values. view less | |
| Acronal® PA 510 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain prod...view more Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain produced with Acronal® PA 510 are therefore highly blocking- resistant and at the same time flexible. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate like aged alkyd resin paints. Acronal® PA 510 formulated high gloss coating provides high block resistant. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate especially to aged alkyd. view less | |
| Acronal® PA 619 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PA 619 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is recommended for use in mortar patching or spraying applications. Admixture compositions formulated with this product show excellent open time at high temperat...view more Acronal® PA 619 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is recommended for use in mortar patching or spraying applications. Admixture compositions formulated with this product show excellent open time at high temperature with many types of cement, entraining low air, and it provides excellent freeze/thaw stability. Acronal® PA 619 ap is also recommended for use in cementitious ceramic tile thin-set adhesives and the modification of mortars and cement repair systems. Mortar compositions modified with this product exhibit better flexural, tensile strengths and show increased resistance to water permeability relative to unmodified mortar compositions. view less | |
| Acronal® PA 807 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PA 807 ap is an anionic dispersion of medium viscosity. It consists of fine, well divided particles. It is a full acrylic copolymer that exhibits excellent exterior durability and good pick-up resistance. The polymer also impacts paint film prope...view more Acronal® PA 807 ap is an anionic dispersion of medium viscosity. It consists of fine, well divided particles. It is a full acrylic copolymer that exhibits excellent exterior durability and good pick-up resistance. The polymer also impacts paint film properties with good scrubability, blocking resistance, good adhesion to masonry surfaces and particularly good wet hiding. Acronal® PA 807 ap is suited to manufacture paints over a broad range of applications and can be formulated at different gloss levels. Acronal® PA 807 ap is used mainly for matt to gloss exterior finishes. view less | |
| Acronal® PLUS 7045 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PLUS 7045 is odorless anionic emulsion polymer with non-leaching anti-microbial properties. This product has specially polymerized carriers with immobilized silver ions that show excellent non-leaching antimicrobial properties without graying of ...view more Acronal® PLUS 7045 is odorless anionic emulsion polymer with non-leaching anti-microbial properties. This product has specially polymerized carriers with immobilized silver ions that show excellent non-leaching antimicrobial properties without graying of the paint. The films obtained from it are clear, glossy and shows excellent resistance towards water and efflorescence. view less | |
| Acronal® PLUS 7048 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PLUS 7048 is an odorless anionic emulsion polymer offering formaldehyde abatement functionality in interior paints. It is functionalized with specialty monomers that help in capturing free formaldehyde from an indoor room. The films obtained from...view more Acronal® PLUS 7048 is an odorless anionic emulsion polymer offering formaldehyde abatement functionality in interior paints. It is functionalized with specialty monomers that help in capturing free formaldehyde from an indoor room. The films obtained from it are clear, glossy and shows excellent resistance towards water and efflorescence. view less | |
| Acronal® PLUS 7048G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PLUS 7048G is a low odor, poly compound emulsion used for anti-formaldehyde interior coatings. This product uses a special functional monomer. It can help capture the free formaldehyde in the indoor air and the emulsion may be formed after drying...view more Acronal® PLUS 7048G is a low odor, poly compound emulsion used for anti-formaldehyde interior coatings. This product uses a special functional monomer. It can help capture the free formaldehyde in the indoor air and the emulsion may be formed after drying. The transparent high-gloss coating has excellent water resistance and weathering properties. view less | |
| Acronal® PRO80 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PRO80 is an APEO- and zinc-free acrylic emulsion. It has excellent anti-corrosion protection and barrier to humidity. This product has good adhesion, good early rain resistance, and high pigmentability with anti-corrosive pigments. It is recommen...view more Acronal® PRO80 is an APEO- and zinc-free acrylic emulsion. It has excellent anti-corrosion protection and barrier to humidity. This product has good adhesion, good early rain resistance, and high pigmentability with anti-corrosive pigments. It is recommended for high build primer, mid-coat and topcoat metal coatings. view less | |
| Acronal® PS 608 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 608 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is used to modify hydraulic binders especially mixtures containing cement. Compounds modified with this product have a very fluid consistency allowing the amount...view more Acronal® PS 608 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is used to modify hydraulic binders especially mixtures containing cement. Compounds modified with this product have a very fluid consistency allowing the amount of water to be strongly reduced without changing the properties of the final product. A significant increase in the flexural strength is observed. Acronal®PS 608 ap is recommended for the manufacture of repair mortar, industrial floor screeds, finescreeds, as well as cementitious self-leveling compounds. view less | |
| Acronal® PS 673 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 673 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Films formed by Acronal...view more Acronal® PS 673 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Films formed by Acronal® PS 673 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. Unpigmented films of this product are tack-free at room temperature. view less | |
| Acronal® PS 707 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 707 ap is an anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. It is very resistant to dissolved inorganic salts. The unpigmented film is clear, transparent, flexible, resistant to water and resista...view more Acronal® PS 707 ap is an anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. It is very resistant to dissolved inorganic salts. The unpigmented film is clear, transparent, flexible, resistant to water and resistant to saponification. This product is suited to the manufacture of primer and sealer over a broad range of formulations. view less | |
| Acronal® PS 713 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 713 ap is an aqueous acrylic dispersion for high quality mastic applications. It is a highly versatile aqueous acrylic dispersion that is suitable for different waterproofing applications and has high adhesion characteristics on various surfac...view more Acronal® PS 713 ap is an aqueous acrylic dispersion for high quality mastic applications. It is a highly versatile aqueous acrylic dispersion that is suitable for different waterproofing applications and has high adhesion characteristics on various surfaces. It is a robust product, which provides a high pigment binding powder and has a very good stability under high shear mixing force. It can be added to mill base to formulate very high solids coatings to prepare thick films. Acronal® PS 713 ap is widely used in the construction industry, especially for mastic waterproofing. view less | |
| Acronal® PS 715 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 715 ap is an aqueous acrylic dispersion for mastic and anti-carbonation coating. It is the appropriate binder to be used for high performance mastic waterproofing membranes. Due to its elastomeric and excellent crack-bridging properties, it im...view more Acronal® PS 715 ap is an aqueous acrylic dispersion for mastic and anti-carbonation coating. It is the appropriate binder to be used for high performance mastic waterproofing membranes. Due to its elastomeric and excellent crack-bridging properties, it imparts a long-term durability to the building. Mastic waterproofing membranes based on this product have good adhesion on various substrates and a very good dirt pick-up resistance. It is ideal for exterior wall waterproofing applications to protect buildings from water leakage as well as from weather effects. view less | |
| Acronal® PS 719 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 719 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmentedfilms of Acr...view more Acronal® PS 719 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmentedfilms of Acronal®PS 719 ap are tack-free at room temperature. Films formed by Acronal®PS 719 ap are clear, flexible and glossy, they have extremely high water resistance, and they arevery resistant to saponification. This product is a general purpose binder, mainly used for primers and sealers for mineral substrates. view less | |
| Acronal® PS 791 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PS 791 ap is an anionic emulsion polymer with a low viscosity, consisting of small, finely divided particles. It has excellent compatibility with pigments and extenders, and very high binding power for pigments. Unpigmented films of Acronal® PS 7...view more Acronal® PS 791 ap is an anionic emulsion polymer with a low viscosity, consisting of small, finely divided particles. It has excellent compatibility with pigments and extenders, and very high binding power for pigments. Unpigmented films of Acronal® PS 791 ap are tack-free at room temperature. Films formed by Acronal® PS 791 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. This product is a general purpose binder, mainly used for the following applications: exterior paints; interior paints, plastic paints for interior application; textured finishes; primers for mineral substrates; and modifying silicate paints and finishes. view less | |
| Acronal® S 400 F ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® S 400 F ap is an aqueous acrylic dispersion for flexible waterproofing membrane. Cementitious waterproofing membranes play an important role in durable, high quality construction projects. It is an aqueous acrylic dispersion that provides cementi...view more Acronal® S 400 F ap is an aqueous acrylic dispersion for flexible waterproofing membrane. Cementitious waterproofing membranes play an important role in durable, high quality construction projects. It is an aqueous acrylic dispersion that provides cementitious waterproofing membranes with outstanding water resistance and excellent crack-bridging properties. It does not contain Ammonia or Formaldehyde, improving your workplace health and safety. view less | |
| Acronal® S 727 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® S 727 is a hydrophobic copolymer binder, which contains an active compound to block and lock tannins and nicotine. It creates a tack-free, elastic, and durable film. It offers water resistance and outstanding tannin blocking properties for tropic...view more Acronal® S 727 is a hydrophobic copolymer binder, which contains an active compound to block and lock tannins and nicotine. It creates a tack-free, elastic, and durable film. It offers water resistance and outstanding tannin blocking properties for tropical woods and knot stains. It has no additional zinc oxide or alternative active compounds needed in formulations. This product is applied in tannin and nicotine blocking primers, decorative and industrial applications, and it is universally applicable for transparent and especially pigmented systems. view less | |
| Acronal® Xpress 7512 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed ...view more Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed to allow for fast re-coats under highly humid climate conditions. BASF’s latest polymer for waterproofing makes use of multiple innovative surface features and a unique composition of ingredients, resulting in low water absorption, excellent blistering resistance, and a high pigment binder capability. view less | |
| Basonat® HB 100 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HB 100 is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate. Basonat® HB 100 is used to formulate coatings in which the...view more Basonat® HB 100 is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate. Basonat® HB 100 is used to formulate coatings in which the solvents contained in the other Basonat® HB grades would prove troublesome such as aromatic hydrocarbons excessively solubilizing polystyrene. view less | |
| Basonat® HB 175 MP/X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate. This product is approx. 75% solution in a 1:1 blend o...view more Basonat® HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate. This product is approx. 75% solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. Basonat® HB polyisocyanates are used to formulate particularly lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or various plastics, e.g., when composites are to be coated. view less | |
| Basonat® HB 175 MP/X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and approximately 75 % solution in a 1:1 blend of 1-me...view more Basonat® HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and approximately 75 % solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. This product is used to formulate particularly lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or various plastics, when composites are to be coated. view less | |
| Basonat® HB 275 B | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and is supplied in 75% solid in 25% butyl acetate to cate...view more Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and is supplied in 75% solid in 25% butyl acetate to cater benzene free working environment. This product is used to formulate particularly lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or various plastics, when composites are to be coated. view less | |
| Basonat® HB 475 B/X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and approximately 75 % solution in a 1:1 blend of n-but...view more Basonat® HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and approximately 75 % solution in a 1:1 blend of n-butyl acetate and xylene. This product is used to formulate particularly lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or various plastics, when composites are to be coated. view less | |
| Basonat® HI 100 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 100 is a solvent-free isocyanurate modified HDI polyisocyanate for weather-resistant and high performance two-pack polyurethane coatings. It is composed of polyisocyanates based on isocyanurated hexamethylene diiso- cyanate. Basonat® HI 100 an...view more Basonat® HI 100 is a solvent-free isocyanurate modified HDI polyisocyanate for weather-resistant and high performance two-pack polyurethane coatings. It is composed of polyisocyanates based on isocyanurated hexamethylene diiso- cyanate. Basonat® HI 100 and Basonat® LR 9046 are solvent-free and thus allow a broad choice of solvents. For instance, when – as in furni- ture coatings – less volatile solvents would retard drying exces- sively, highly volatile solvents can be chosen. view less | |
| Basonat® HI 100AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 100AP is a solvent free aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of polyisocyanates based on isocyanurated hexamethylene diiso- cyanate. Basonat® HI 100 ap is solvent-free and ...view more Basonat® HI 100AP is a solvent free aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of polyisocyanates based on isocyanurated hexamethylene diiso- cyanate. Basonat® HI 100 ap is solvent-free and thus allows a broad choice of solvents. For instance, when – as in furniture coatings – less volatile solvents would retard drying excessively, highly volatile solvents can be chosen. view less | |
| Basonat® HI 190 B/S | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 190 B/S is an isocyanurate modified HDI polyisocyanate. It is a 90% solution in n-butyl acetate and Solvesso® 100 (1:1) for weather-resistant and high performance two-pack polyurethane coatings. Basonat® HI polyisocyanates are used to crosslin...view more Basonat® HI 190 B/S is an isocyanurate modified HDI polyisocyanate. It is a 90% solution in n-butyl acetate and Solvesso® 100 (1:1) for weather-resistant and high performance two-pack polyurethane coatings. Basonat® HI polyisocyanates are used to crosslink most hydroxy acrylic resins, e. g., Joncryl® grades, and hydroxy polyesters. Basonat® HI 190 B/S ap is solution of Basonat® HI100 ap. Basonat® HI grades are used to formulate particularly lightfast and weather-resistant coatings. Sufficient compatibility with polyester resins containing hydroxyl groups is not always given. view less | |
| Basonat® HI 190 B/S AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 190 B/S AP is an aliphatic polyisocyanates for lightfast and weather-resistant two-pack polyurethane coatings. It is a 90% solution in a 1:1 blend of n-butyl acetate and Solvesso®1 100. Basonat® HI grades are used to formulate particularly lig...view more Basonat® HI 190 B/S AP is an aliphatic polyisocyanates for lightfast and weather-resistant two-pack polyurethane coatings. It is a 90% solution in a 1:1 blend of n-butyl acetate and Solvesso®1 100. Basonat® HI grades are used to formulate particularly lightfast and weather- resistant coatings. Sufficient compatibility with polyester resins containing hydroxyl groups is not always given. Results from long-term weathering tests show that in most cases gloss retention is better than with polyisocyanates based on bi- urets of hexamethylene diisocyanate (Basonat® HB grades). Their low viscosity allows the non-volatile fraction of coatings to be increased when Basonat® HI grades are used instead of Basonat® HB grades. view less | |
| Basonat® HI2000 (old name : LR 9046) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 2000 is a solvent-free, low viscosity isocyanurate modified HDI polyisocyanate for high solid, low VOC, weather-resistant and high performance two-pack polyurethane coatings. This product is composed of polyisocyanates based on isocyanurated h...view more Basonat® HI 2000 is a solvent-free, low viscosity isocyanurate modified HDI polyisocyanate for high solid, low VOC, weather-resistant and high performance two-pack polyurethane coatings. This product is composed of polyisocyanates based on isocyanurated hexamethylene di-isocyanate. Combined with conventional acrylic resins, a solids content approx. 3 % higher than with Basonat® HI 100 can be achieved. Using high-solids binders such as Joncryl® polyol grades allows the solids content to be increased even further. view less | |
| Basonat® HW 1180 PC (old name : HW 180 PC) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HW 1180 PC is a water-emulsifiable polyfunctional isocyanates based on HDI for crosslinking for crosslinking reactive OH group polymer emulsions. It is recommended for waterborne 2k industry coatings. This product is an 80 % solution in Solvenon®...view more Basonat® HW 1180 PC is a water-emulsifiable polyfunctional isocyanates based on HDI for crosslinking for crosslinking reactive OH group polymer emulsions. It is recommended for waterborne 2k industry coatings. This product is an 80 % solution in Solvenon® PC (propylene carbonate). Basonat® HW grades are used as hardeners for polymeric dispersions containing reactive OH groups. view less | |
| Basonat® HW 2000 (old name : LR9056) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HW 2000 is a water-emulsifiable HDI polyfunctional isocyanate for crosslinking reactive OH group polymer emulsions. It is used as a hardener for polymer dispersion containing reactive OH groups. | |
| Basonat® HW 3180 B (old name : LR 9080) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® 3180 B is a water-emulsifiable polyfunctional isocyanate based on isocyanurated hexa-methylene diisocyanate and isophorone diisocyanate, 80% solution in n-butyl acetate. It is used as a co-hardener in combination of hydrophilic HDI based Polyisoc...view more Basonat® 3180 B is a water-emulsifiable polyfunctional isocyanate based on isocyanurated hexa-methylene diisocyanate and isophorone diisocyanate, 80% solution in n-butyl acetate. It is used as a co-hardener in combination of hydrophilic HDI based Polyisocyanates for water-based 2K PU Coatings. view less | |
| Basonol® HPE 1170 B | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonol® HPE 1170 B is a OH functional hyperbranched Polyester to be used as a cobinder in 2K PUR and 1K clear- and pigmented coating 2K systems for improved performance. | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division 巴斯夫中间体 | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division 巴斯夫中间体 | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division 巴斯夫中间体 | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division 巴斯夫中间体 | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division 巴斯夫中间体 | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division 巴斯夫中间体 | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF SE, Intermediates Division 巴斯夫中间体 | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Cinquasia® Magenta L 4530 (old: Cinquasia® Magenta B RT-343-D) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Cinquasia® Magenta L 4530 (old: Cinquasia® Magenta B RT-343-D) is a saturated bluish magenta with excellent rheology for saturated opaque reds in high-solids automotive paints, also used in metallic finishes. The Colour Index for this quinacridone is Pigm...view more Cinquasia® Magenta L 4530 (old: Cinquasia® Magenta B RT-343-D) is a saturated bluish magenta with excellent rheology for saturated opaque reds in high-solids automotive paints, also used in metallic finishes. The Colour Index for this quinacridone is Pigment Red 202 | 73907. It is suitable for the following applications: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying. view less | |
| Cinquasia® Magenta L 4540 (old: Cinquasia® Magenta RT-355-D) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Cinquasia® Magenta L 4540 (old: Cinquasia® Magenta RT-355-D) is a very transparent and saturated yellowish magenta, also suitable for UV-curable screen inks. This quinacridone product is suitable for the automotive industry, and it is potentially suitable...view more Cinquasia® Magenta L 4540 (old: Cinquasia® Magenta RT-355-D) is a very transparent and saturated yellowish magenta, also suitable for UV-curable screen inks. This quinacridone product is suitable for the automotive industry, and it is potentially suitable for general industrial and powder industry use. It is used in baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying applications. view less | |
| Cinquasia® Red L 4100 HD (old: Cinquasia® Red Y RT-759-D) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Cinquasia® Red L 4100 HD (old: Cinquasia® Red Y RT-759-D) is an opaque yellowish quinacridone with good outdoor properties. The Colour Index is Pigment Violet 19 | 73900. It is suitable for industries such as automotive, general industrial, coil, powder, ...view more Cinquasia® Red L 4100 HD (old: Cinquasia® Red Y RT-759-D) is an opaque yellowish quinacridone with good outdoor properties. The Colour Index is Pigment Violet 19 | 73900. It is suitable for industries such as automotive, general industrial, coil, powder, and decorative. This product is suitable for the following applications: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying. view less | |
| Cinquasia® Violet L 4130 (old: Cinquasia® Transparent Red B RT-333-D) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Cinquasia® Violet L 4130 (old: Cinquasia® Transparent Red B RT-333-D) is a saturated blue-shade red pigment with good dispersibility, suitable for metallic finishes. It is a quinacridone that is suitable for the following applications: baking finishes, wa...view more Cinquasia® Violet L 4130 (old: Cinquasia® Transparent Red B RT-333-D) is a saturated blue-shade red pigment with good dispersibility, suitable for metallic finishes. It is a quinacridone that is suitable for the following applications: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying. view less | |
| Cinquasia® Violet L 5110 (old: Cinquasia® Violet R RT-101-D) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Cinquasia® Violet L 5110 (old: Cinquasia® Violet R RT-101-D) is a very transparent violet with high color strength for use in mica and aluminum shades in automotive and refinish paints. It is a quinacridone with a Colour Index of Pigment Violet 19 | 73900...view more Cinquasia® Violet L 5110 (old: Cinquasia® Violet R RT-101-D) is a very transparent violet with high color strength for use in mica and aluminum shades in automotive and refinish paints. It is a quinacridone with a Colour Index of Pigment Violet 19 | 73900. This product is suitable for industries such as automotive and general industrial, and it is potentially suitable for the coil, powder, wood, and decorative industries. It is suitable for the following applications: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, air-drying. view less | |
| Cinquasia® Violet L 5120 (old: Cinquasia® Violet R NRT-201-D) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Cinquasia® Violet L 5120 (old: Cinquasia® Violet R NRT-201-D) is a semi-transparent violet with high color strength for use in mica and aluminum as well as solid shades in automotive and refinish paints. The Colour Index for this quinacridone product is P...view more Cinquasia® Violet L 5120 (old: Cinquasia® Violet R NRT-201-D) is a semi-transparent violet with high color strength for use in mica and aluminum as well as solid shades in automotive and refinish paints. The Colour Index for this quinacridone product is Pigment Violet 19 | 73900. It is suitable for use in automotive, general industrial, coil, powder, and decorative industries. This product is suitable for applications in baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying. view less |
