| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...view more 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. view less | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...view more 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. view less | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| Acronal® PRO80 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PRO80 is an APEO- and zinc-free acrylic emulsion. It has excellent anti-corrosion protection and barrier to humidity. This product has good adhesion, good early rain resistance, and high pigmentability with anti-corrosive pigments. It is recommen...view more Acronal® PRO80 is an APEO- and zinc-free acrylic emulsion. It has excellent anti-corrosion protection and barrier to humidity. This product has good adhesion, good early rain resistance, and high pigmentability with anti-corrosive pigments. It is recommended for high build primer, mid-coat and topcoat metal coatings. view less | |
| Genamid® 250 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Genamid® 250 is a low viscosity, amidoamine resin designed for reaction with liquid or solid epoxy resins in epoxy coating systems. It offers good compatibility with a wide range of epoxy products and is most commonly used with Bisphenol A-based epoxy res...view more Genamid® 250 is a low viscosity, amidoamine resin designed for reaction with liquid or solid epoxy resins in epoxy coating systems. It offers good compatibility with a wide range of epoxy products and is most commonly used with Bisphenol A-based epoxy resins that have an epoxide equivalent weight of approximately 190. It is lower in viscosity than Genamid® 2000 although it is generally slower in cure time. Resins systems based on Genamid® 250 allow low viscosity formulation with high pigment loading. In comparison to many similar curing agents, Genamid® 250 gives rapid cure response. It is ideally suited for high solids formulations with low viscosity epoxy resins. Genamid® 250 and epoxy resin systems are recommended for applications such as: adhesives, electrical encapsulations, laminates and industrial maintenance coatings. view less | |
| Genamid® 747 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Genamid® 747 is a very low viscosity, amidoamine resin designed for reaction with liquid or solid epoxy resins in epoxy coating systems. It offers immediate compatibility with a wide range of epoxy products and forms tough, chemically resistant industrial...view more Genamid® 747 is a very low viscosity, amidoamine resin designed for reaction with liquid or solid epoxy resins in epoxy coating systems. It offers immediate compatibility with a wide range of epoxy products and forms tough, chemically resistant industrial coatings. It is ideally suited for high solids formulations with low viscosity epoxy resins. Genamid® 747 and epoxy resin systems are recommended for applications such as: adhesives, electrical encapsulations, laminates and industrial coatings. view less | |
| Laroflex® MP 15 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laroflex® MP 15 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product is 12–18 mPa . s. It can be used for anti-corrosion coatings, for coating...view more Laroflex® MP 15 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product is 12–18 mPa . s. It can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. This product is compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. The low-viscous solution of Laroflex® MP 15 is easiest diluted with aliphatic hydrocarbons. It produces the highest gloss and the viscosity changes least during storage. view less | |
| Laroflex® MP 25 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laroflex® MP 25 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product 20–26 mPa . s. It can be used for anti-corrosion coatings, for coatings o...view more Laroflex® MP 25 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product 20–26 mPa . s. It can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. This product is compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. The low-viscous solution of Laroflex® MP 25 is diluted the easiest with aliphatic hydrocarbons. It produces highest gloss and viscosity changes least during storage. view less | |
| Laroflex® MP 35 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laroflex® MP 35 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product is 30–40 mPa . s. It can be used for anti-corrosion coatings, for coating...view more Laroflex® MP 35 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product is 30–40 mPa . s. It can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. This product is compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. view less | |
| Laroflex® MP 45 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laroflex® MP 45 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this grade is 40–50 mPa . This fine white powder can be used for anti-corrosion coatin...view more Laroflex® MP 45 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this grade is 40–50 mPa . This fine white powder can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. They are compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. view less | |
| Luhydran® A 848 S | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luhydran® A 848 S is a self-crosslinking workhorse acrylic emulsion for interior wood coating applications. This white emulsion is suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topco...view more Luhydran® A 848 S is a self-crosslinking workhorse acrylic emulsion for interior wood coating applications. This white emulsion is suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. Luhydran® A 848 S can also be used for plastics and fiber cement board. In blends with polyurethane dispersions, it provides excellent adhesion for wood floor coatings. Luhydran® A 848 S is recommended for applications such as: interior wood coatings for furniture or millwork applications; and general purpose and commercial interior coating applications. view less | |
| Luwipal® 015 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luwipal® 015 is a high reactivity melamine formaldehyde resins. This product is partially etherified with isobutanol. It is recommended for metal effect clearcoats in auto or general industry applications. | |
| Versamid® 115 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Versamid® 115 is a high viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for flexible and resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Ver...view more Versamid® 115 is a high viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for flexible and resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 115 and epoxy resin systems provide excellent resistance properties, adhesion and superior corrosion resistance. They are more solvent and chemical resistant than Versamid® 100 systems and generally dry faster than Versamid® 125 systems. Versamid® 115 and epoxy resin systems are recommended for applications such as: maintenance coating applications; primers; and enamel paint formulations. view less | |
| Versamid® 125 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Versamid® 125 is a medium viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications...view more Versamid® 125 is a medium viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 125 and epoxy resin systems are generally harder than and cure more rapidly than Versamid® 140 systems. It is often blended with Genamid® 250, a fatty amido amine resin, to provide a range of viscosities, cure speeds and resistance properties. Versamid® 125 and epoxy resin systems are recommended for applications such as: maintenance coating applications; primers; and enamel paint formulations. view less | |
| Versamid® 140 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Versamid® 140 is a medium to low viscosity, reactive polyamide-based resin solution designed for use with solid or liquid epoxy resins to provide tough, chemical-resistant thermoset coating applications that cure at room temperature. This amber liquid is ...view more Versamid® 140 is a medium to low viscosity, reactive polyamide-based resin solution designed for use with solid or liquid epoxy resins to provide tough, chemical-resistant thermoset coating applications that cure at room temperature. This amber liquid is also useful in adhesive applications. Versamid® 140 and epoxy resin coating systems are more chemical and solvent resistant than Versamid® 115 systems and generally lower in viscosity than Versamid® 125 systems. It offers a unique combination of hardness and flexibility along with the highest chemical and solvent resistance of the dimmer-based polyamide resin series. Versamid® 140 and epoxy resin systems are recommended for applications such as: maintenance coating applications; primers; and high solids enamel paint formulations. view less | |
| Versamid® 150 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Versamid® 150 is a low viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins to provide tough, chemical resistance to thermoset coating and potting applications that cure at room temperature. It is a polyamide resin based ...view more Versamid® 150 is a low viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins to provide tough, chemical resistance to thermoset coating and potting applications that cure at room temperature. It is a polyamide resin based on dimerized fatty acid and polyamines. Versamid® 150 and epoxy resin systems offer significantly lower viscosity than Versamid® 140 systems, while its chemical and solvent resistance, flexural strength and compressive strength properties are similar. Versamid®150 systems will normally provide a faster cure rate and slightly less flexibility than Versamid® 140 systems. This product and epoxy resin systems are recommended for applications such as: industrial maintenance surface coating applications; primers, encapsulating potting and laminating applications; and low viscosity, thermoset adhesive formulations. view less |
