| Dehydran® P 3615 | BASF Formulation Additives 巴斯夫配方助剂 | Dehydran® P 3615 is an antifoam / defoamer for latex polymerization, specifically used in monomer "stripping". It is a formulation based on alkylpolyalcoxyether and modified fats. This product is an opaque, lightly amber liquid. | |
| DISPEX® AA 4030 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
| DISPEX® AA 4135 NA | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| DISPEX® AA 4140 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...view more DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. view less | |
| Dispex® AA S 760 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® AA S 760 (formerly Hydropalat® 1706) is a derivative of a family of highly effective dispersing agents for water-based coating systems, especially suitable for the dispersion of inorganic pigments. | |
| Dispex® AA S040 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® AA S040 (formerly Hydropalat® 5040) is a wetting and dispersing agent used to optimize the dispersing process of pigments and fillers. | |
| DISPEX® CX 4230 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4230 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| Dispex® CX 4231 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4231 (formerly Ultradispers® AB 30) is an effective polymeric ammonium salt of a carboxylic acid copolymer. It has a pronounced hydrophobic character and reduces snail trails and water uptake. | |
| Dispex® CX 4234 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4234 (formerly Hydropalat® 34) is a hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.1 to 3.0 % based on pigment solids | |
| DISPEX® CX 4240 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in...view more DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. view less | |
| DISPEX® CX 4320 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...view more DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. view less | |
| DISPEX® CX 4340 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in wa...view more DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. view less | |
| Dispex® CX 4345 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4345 (formerly Ultradispers® MD 21) is an effective polymeric sodium salt of a carboxylic acid copolymer in water. Its hydrophobic character results in an outstanding improvement of wet scrub resistance. | |
| DISPEX® CX 4910 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. ...view more DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. DISPEX® CX 4910 is a sodium salt of an acrylic polymer. For the production of systems, traded as ‘dry systems’, DISPEX® CX 4910 is typically incorporated into the dry powder mix by a normal dry blending operation. Upon wetting of such a ‘dry system’ a waterbased paste/slurry is generated. DISPEX® CX 4910 is effective over a pH range 5-12 and up to temperatures in excess of 100°C. view less | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4401 (formerly Pluracoat® Dispersal DA 120) is a non-ionic surfactant with excellent pigment wetting and dispersing properties. It is compatible with other nonionic, anionic, and cationic surfactants. | |
| DISPEX® Ultra FA 4404 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyp...view more DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyphosphate with those of an organic dispersant thus yielding highly concentrated, stable and low-viscosity inorganic pigment suspensions, e. g. TiO2-slurries. view less | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...view more DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. view less | |
| DISPEX® Ultra FA 4420 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal c...view more DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal colorants for decorative paints. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4420 to the base paints (water and solvent) can increase compatibility and color acceptance and prevents de-wetting of the colorants. DISPEX® Ultra FA 4420 is an activator for Bentonites as well as for associated and acrylic thickeners. view less | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...view more DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. view less | |
| Dispex® Ultra FA 4430 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4430 (formerly Lumiten® N-OC 30) is a nonionic surfactant used to improve the storage stability of emulsion paints and their compatibility with cement and lime. | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...view more DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. view less | |
| DISPEX® Ultra FA 4437 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to...view more DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes and streaks caused by incompatible components. Furthermore, DISPEX® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems. view less | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...view more DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. view less | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4483 (formerly Hydropalat® 7003) is a dispersing agent for inorganic pigments and stabilizing surfactant for latex production. It is a phosphoric acid ester based wetting and dispersing agent. The product is supplied as a 30 % aqueous sol...view more Dispex® Ultra FA 4483 (formerly Hydropalat® 7003) is a dispersing agent for inorganic pigments and stabilizing surfactant for latex production. It is a phosphoric acid ester based wetting and dispersing agent. The product is supplied as a 30 % aqueous solution in acidic form. view less | |
| DISPEX® Ultra PA 4503 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- a...view more DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- and solvent-based decorative paint systems means these concentrates are suitable for the production of tinting systems where only low shear forces (shaking machines) are used. The chemical character of DISPEX® Ultra PA 4503 makes it suitable for systems with a wide pH range (5–12). view less | |
| Dispex® Ultra PA 4516 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra PA 4516 (formerly Efka® 1016) is a dispersing resin that is a polymer of low average molecular weight with highly hydrophilic properties. It was developed to function as a pigment grinding resin for water- based inks. Further, it may be used...view more Dispex® Ultra PA 4516 (formerly Efka® 1016) is a dispersing resin that is a polymer of low average molecular weight with highly hydrophilic properties. It was developed to function as a pigment grinding resin for water- based inks. Further, it may be used as a modifier resin to improve machine stability (resolubility) of water based inks made on more hydrophobic resins. The product may also be used as a sole binder where high solids and very good resolubility are required. view less | |
| DISPEX® Ultra PA 4550 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. D...view more DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. DISPEX® Ultra PA 4550 is pH-independent and has a broad compatibility in most commonly used water-based coatings. It is completely water-soluble and does not need to be neutralized. view less | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...view more DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). view less | |
| Dispex® Ultra PA 4580 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra PA 4580 (formerly Efka® 4580) is a high-molecular-weight dispersing agent. It stabilizes the pigment dispersion of inorganic and organic pigments and improves viscosity reduction of pigment paste, pigment loading, gloss, color strength, floc...view more Dispex® Ultra PA 4580 (formerly Efka® 4580) is a high-molecular-weight dispersing agent. It stabilizes the pigment dispersion of inorganic and organic pigments and improves viscosity reduction of pigment paste, pigment loading, gloss, color strength, flocculation stability and anit-flooding behavior. Dispex® Ultra PA 4580 is a modified polyacrylate polymer used as a dispersant for resin-free pigment concentrates (RFPC) and/or resin-minimal pigment concentrates (RMPC) in both water and solvents. These universal concentrates can be used for water- or solvent-based applications such as high-end industrial and automotive coatings. view less | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra PA 4590 (formerly Efka® 4590) is a high molecular weight polymeric dispersant for water-based coatings. It is designed as a cost effective alternative to the existing polymeric dispersants, suitable for all kind of pigments in water-based in...view more Dispex® Ultra PA 4590 (formerly Efka® 4590) is a high molecular weight polymeric dispersant for water-based coatings. It is designed as a cost effective alternative to the existing polymeric dispersants, suitable for all kind of pigments in water-based industrial coatings as well as for pigment concentrates. view less | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...view more DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. view less | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...view more DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. view less | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...view more DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). view less | |
| Efka® 3650 N | BASF Formulation Additives 巴斯夫配方助剂 | Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable fo...view more Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable for baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy coatings, and air-drying alkyd systems. view less | |
| EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...view more EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. view less | |
| EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...view more EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. view less | |
| Efka® FA 4610 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4610 (formerly Efka® 5010) is anionic wetting and dispersing additive for inorganic pigments. It helps to wet and disperse inorganic pigments and extenders, and is particularly suitable for automotive, general industrial, coil coating and acid cu...view more Efka® FA 4610 (formerly Efka® 5010) is anionic wetting and dispersing additive for inorganic pigments. It helps to wet and disperse inorganic pigments and extenders, and is particularly suitable for automotive, general industrial, coil coating and acid curing. Efka® FA 4610 could have a catalyzing effect on the reaction in stoving enamels. This may lead to viscosity increase during storage. view less | |
| Efka® FA 4612 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4612 (formerly Efka® 5210) helps to wet and disperse extenders (CaCO3 and AI (OH) 3) with unsaturated polyester resins or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers. This results in easier incorporation of th...view more Efka® FA 4612 (formerly Efka® 5210) helps to wet and disperse extenders (CaCO3 and AI (OH) 3) with unsaturated polyester resins or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers. This results in easier incorporation of the extenders leading to reduced dispersing times. It also provides lower and stable viscosity of the pastes and therefore improved flow, higher filler-load and better flame retardance. Efka® FA 4612 is designed for filled SMC- and BMC compounds. It is also suitable for filled gelcoats. view less | |
| Efka® FA 4615 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4615 (formerly Efka® 5215) is an efficient wetting and dispersing agent for inorganic extenders. This results in improved wetting and incorporation of extenders, reduced viscosity of the paste/compound and increased extender load. Efka® FA 4615 i...view more Efka® FA 4615 (formerly Efka® 5215) is an efficient wetting and dispersing agent for inorganic extenders. This results in improved wetting and incorporation of extenders, reduced viscosity of the paste/compound and increased extender load. Efka® FA 4615 is suited for filled unsaturated polyester systems (SMC-, BMCcompounds, gelcoats, and putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers. view less | |
| EFKA® FA 4620 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler an...view more EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler and extender loading. EFKA® FA 4620 is suited for filled unsaturated polyester systems (e.g. SMC/BMC, gel coats, car putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP formulations). view less | |
| EFKA® FA 4642 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...view more EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. view less | |
| EFKA® FA 4644 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...view more EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. view less | |
| EFKA® FA 4654 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced...view more EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose varnishes. view less | |
| Efka® FA 4654 EM | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4654 EM (formerly Texaphor® 987) is a dispersing, antisettling-, antiflooding and antifloating additive for medium and non polar coatings, gelling aid for organically modified bentonites. | |
| EFKA® FA 4663 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...view more EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. view less | |
| EFKA® FA 4665 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...view more EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. view less | |
| EFKA® FA 4666 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents floodi...view more EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane systems, acrylic polyisocyanate systems (2-pack acrylics) and chlorinated polymers. view less | |
| Efka® FA 4670 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4670 (formerly Efka® 5070) helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. Due to its wide compatibility and the combination with a polysiloxane, the following advantages can be achieved: reduced di...view more Efka® FA 4670 (formerly Efka® 5070) helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. Due to its wide compatibility and the combination with a polysiloxane, the following advantages can be achieved: reduced dispersion time and stabilization of the pigment dispersion, prevention of flooding and floating, reduced pigment sedimentation, reduced tendency to 'orange-peel', improved gloss and leveling. This product is a high-molecular weight unsaturated polycarboxylic acids and esters, combined with a compatible organically modified polysiloxane. Efka® FA 4670 is especially suitable to stabilize all kinds of pigments and is applied in solvent-based industrial coatings like: alkyd/amino resin combinations; acrylic polyisocyanate systems; nitro-cellulose systems; polyurethane- and chlorinated polymer systems; and chlorinated polymers. view less | |
| EFKA® FA 4671 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimen...view more EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. view less | |
| Efka® FA 4672 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4672 (formerly Texaphor® SF 71) is a wetting and dispersing agent for reactive resins. This colorless to pale yellow liquid is a mixture of ionic and nonionic esters. Its viscosity-reducing properties make it especially suitable for high and full...view more Efka® FA 4672 (formerly Texaphor® SF 71) is a wetting and dispersing agent for reactive resins. This colorless to pale yellow liquid is a mixture of ionic and nonionic esters. Its viscosity-reducing properties make it especially suitable for high and full solid systems. Efka® FA 4672 ensures that fillers are quickly and optimally dispersed. The reduction in viscosity enables fillers to be blended more easily and allows a higher filler content to be achieved. Efka® FA 4672 is readily compatible with a wide variety of binder types and can therefore be used in 2-component PUR, 2-component EP and unsaturated polyester resins. view less | |
| Efka® FA 4673 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4673 (formerly Texaphor® 873 Conc) is a dispersing agent for pigment pastes consisting mainly of inorganic pigments and organic media and used for the colouring of plastics, coatings, and printing inks. | |
| Efka® FL 3670 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FL 3670 (formerly Irgaflow® 110) is a modified poly (acryl ate) leveling agent with enhanced properties. It demonstrates an overall good compatibility with most solvent-based resins and is a very effective anti-cratering and flow control agent with ...view more Efka® FL 3670 (formerly Irgaflow® 110) is a modified poly (acryl ate) leveling agent with enhanced properties. It demonstrates an overall good compatibility with most solvent-based resins and is a very effective anti-cratering and flow control agent with minimized effect on stabilizing foam and a higher leveling efficiency compared to Efka® FL 3670. Due to the wide compatibility of Efka® FL 3670, it can be used in most solvent-based liquid coating systems to improve the leveling of the final dry film surface without having a negative impact on recoat ability. This slightly hazy liquid is designed to be used in solvent-borne industrial applications. Main applications are coils coating systems, stoving enamels and wood coatings. Efka® FL 3670 is also recommended for the use in UV coatings. view less | |
| EFKA® FL 3740 EH | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coating...view more EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. EFKA® FL 3740 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part EFKA® FL 3740. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents applied on SiO2 are avoided. In particular, pigmented and transparent powder coatings with excellent levelling properties are obtained for the production of weatherproof powder coatings. view less | |
| Efka® FL 3741 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FL 3741 (formerly Perenol® F41) is a silicone and solvent free levelling agent with air release properties for different reactive resin systems. Due to its chemical structure, Efka® FL 3741 modifies the surface tension in reactive resin systems. It ...view more Efka® FL 3741 (formerly Perenol® F41) is a silicone and solvent free levelling agent with air release properties for different reactive resin systems. Due to its chemical structure, Efka® FL 3741 modifies the surface tension in reactive resin systems. It eliminates or reduces peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. This clear, yellow liquid can be used in: unsaturated Polyester, vinylester, epoxy resin paints, 100% UV paints / coatings, acrylic/melamine resin coatings, 2-component acrylic coatings, PVC copolymer coatings, polyurethane coatings, chlorinated rubber coatings, and nitrocellulose laquers. view less | |
| EFKA® FL 3745 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3745 is a silicone-free levelling agent with air release properties for powder coatings. It can be used in liquid non-aqueous coatings as well as in powder coating. Due to its chemical structure EFKA® FL 3745 modifies the surface tension of powde...view more EFKA® FL 3745 is a silicone-free levelling agent with air release properties for powder coatings. It can be used in liquid non-aqueous coatings as well as in powder coating. Due to its chemical structure EFKA® FL 3745 modifies the surface tension of powder coatings. By formulating with this product, smooth trouble-free film surfaces will be obtained, generally with an improvement in gloss. This copolyacrylate is a clear, colorless liquid. view less | |
| Efka® FL 3770 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FL 3770 (formerly Irgaflow® 100) is a slip & leveling agent that is know for being compatible with most solvent-based resins. It is also a very effective anti-cratering agent as well as a flow control agent without stabilizing foam. This product is ...view more Efka® FL 3770 (formerly Irgaflow® 100) is a slip & leveling agent that is know for being compatible with most solvent-based resins. It is also a very effective anti-cratering agent as well as a flow control agent without stabilizing foam. This product is a fluorocarbon-modified polyacrylate. Due to its broad compatibility, Efka® FL 3770 can be used in most solvent-based liquid coating systems to improve the leveling of the dry film with no negative impact on recoatability. It is designed to be used in two-pack PUR automotive refinish coatings, polyester/melamine coil coatings, two-pack epoxy and PUR compounds, and UV-curable wood coatings. view less | |
| EFKA® FL 3778 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and ai...view more EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and air-drying alkyd systems. view less | |
| EFKA® FL 3785 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL ...view more EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL 3785 is especially suitable for coil coatings, two-pack epoxy or polyurethane coatings, baking enamels and gelcoats. For enhanced performance in coil and two-pack coatings, EFKA® FL 3785 can be combined with EFKA® FL 3600. Compared to fluorocarbon-modified acrylates or silicone leveling additives, EFKA® FL 3785 has less influence on surface tension and more effect on de-aeration. view less | |
| Efka® FL 3930 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FL 3930 (formerly Perenol® F 30 P) is a silicone-free levelling agent in powder form for use in powder coatings. It was developed on the basis of the proven liquid leveling agent Efka® FL 3930. The chemical nature of this product is a mixture of acr...view more Efka® FL 3930 (formerly Perenol® F 30 P) is a silicone-free levelling agent in powder form for use in powder coatings. It was developed on the basis of the proven liquid leveling agent Efka® FL 3930. The chemical nature of this product is a mixture of acrylate copolymer and silica gel. It is applied in powder coatings based on: epoxy resins, polyacrylates, polyesters and polyurethane. view less | |
| Efka® MI 6779 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® MI 6779 (formerly Texaquart® 879 N) is a cationic additive to increase the electric conductivity of industrial coatings. Due to its strong polar character Efka® MI 6779 increases the electric conductivity or, in other words, decreases the electric r...view more Efka® MI 6779 (formerly Texaquart® 879 N) is a cationic additive to increase the electric conductivity of industrial coatings. Due to its strong polar character Efka® MI 6779 increases the electric conductivity or, in other words, decreases the electric resistance of a liquid or solid paint film. The product being highly surface active encourages dispersion of the paint into fine droplets whilst being electrostatically sprayed. view less | |
| Efka® PA 4101 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PA 4101 (formerly Efka® 1101) is a dispersing resin that is tailor-made for the production of solvent-based pigment concentrates with minimal resin content. It shows good pigment wetting and stabilizing performance and excellent compatibility with t...view more Efka® PA 4101 (formerly Efka® 1101) is a dispersing resin that is tailor-made for the production of solvent-based pigment concentrates with minimal resin content. It shows good pigment wetting and stabilizing performance and excellent compatibility with the resins most commonly used in paints. Due it its primary hydroxyl groups, Efka® PA 4101 is able to crosslink with amino or polyisocyanate resins. view less | |
| EFKA® PA 4400 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...view more EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. EFKA® PA 4400 is an acrylic polymer with significant higher molecular weight compared with the EFKA® polyurethane-based polymeric dispersants. This gives better deflocculation of organic pigments. view less | |
| EFKA® PA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from lo...view more EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from low- to high-polarity systems, including nitrocellulose. Care should be taken with EFKA® PA 4401 because of its tendency to yellowing and gelling when combined with chlorinated polymers. It also has a tendency to yellowing when combined with solvent-free epoxies. EFKA® PA 4401 is used for all kinds of high-quality solvent-based industrial coatings including automotive topcoats as well as pigment concentrates. view less | |
| Efka® PA 4414 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PA 4414 (formerly Efka® 7414) is a polymeric dispersant for enhancing the dispersion of organic pigments. This results in improved color strength, lower viscosity and improved gloss. Efka® PA 4414 enhances processing of pigment bases during grinding...view more Efka® PA 4414 (formerly Efka® 7414) is a polymeric dispersant for enhancing the dispersion of organic pigments. This results in improved color strength, lower viscosity and improved gloss. Efka® PA 4414 enhances processing of pigment bases during grinding and enables higher pigment loads to be achieved. It also enhances color development and rheological properties of finished inks. Efka® PA 4414 is equally suited to cationic and free radical systems, and it may be used in screen, flexography and offset applications. view less | |
| EFKA® PA 4450 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PA 4450 is a polymeric dispersant for inorganic and organic pigments in non-aqueous, polar and non-polar coatings. This clear liquid avoids flocculation of pigments, increases color strength and also reduces grinding time. It is a carboxyl functiona...view more EFKA® PA 4450 is a polymeric dispersant for inorganic and organic pigments in non-aqueous, polar and non-polar coatings. This clear liquid avoids flocculation of pigments, increases color strength and also reduces grinding time. It is a carboxyl functional polymer that can be used in all systems independent from its polarity, e. g. alkyds, PE, acrylics. 2 - component polyurethane paints, 2 - component epoxy paints, unsaturated polyester. The application in systems with low polarity is possible as well. EFKA® PA 4450 is used in combination with all commonly used solvents. It shows good solubility even with isoparaffins, which makes it very useful for these systems. It also shows excellent performance when used as a dispersant in pigment pastes. view less | |
| EFKA® PB 2001 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001...view more EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001 is used in nitrocellulose lacquers, particularly those applied on curtain coaters, 1- or 2-component acid curing wood coatings, particularly fast drying types applied on curtain coaters, acrylic resin finishes, air drying epoxy resin paints and unsaturated polyester. The paint industry uses defoamers to ensure that air bubbles occurring during application of lacquers and paints can escape from the film while still wet. The formation of craters is thus substantially eliminated. One must differentiate between: bubbles which originate from the substrate (wood and paper are typical examples), and bubbles which may be generated in the paint by pumping, rolling, airless spraying or curtain coating. view less | |
| EFKA® PB 2010 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. It eliminates foaming and blistering regardless of whether the air bubbles are a result of the sub...view more EFKA® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. It eliminates foaming and blistering regardless of whether the air bubbles are a result of the substrate (e.g., wood or metal) or due to the application method (pumping, rolling, flooding or spraying). EFKA® PB 2010 performs well for a wide range of applications and is particularly suitable for clear coatings, without haziness, as well as providing high gloss if required. view less | |
| EFKA® PB 2018 AN | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 201...view more EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 2018 is especially suited for solvent-based wood finishes if foam formation is a problem when applied by spraying or curtain coating. It has very good compatibility properties which makes it extremely suitable for use in clear coatings. view less | |
| EFKA® PB 2020 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result ...view more EFKA® PB 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result of pumping, rolling, flooding or airless spraying. view less | |
| EFKA® PB 2021 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product ...view more EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product helps to prevent surface irregularities to give the smoothest possible surface. EFKA® PB 2021 is especially suited for solvent-based coatings if foam formation is a problem when applied by spraying or curtain coating. view less | |
| EFKA® PB 2720 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2720 supports the quick de-aeration of thermosetting resin systems. It can be used in pigmented or non-pigmented resin systems such as unsaturated polyesters, 2-pack epoxies, and PVC-compounds. | |
| EFKA® PL 5381 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of p...view more EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of polymeric plasticizers. view less | |
| EFKA® PL 5382 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PL 5382 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ...view more EFKA® PL 5382 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ageing. It is compatible with PVC, many other plastics, synthetic resins, plasticizers and gives transparent films. It can be hardened with acids, anhydrides, and amines. Moreover, it remains stable even at higher temperatures. view less | |
| Efka® PL 5520 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PL 5520 (formerly Dehysol® BS 20 N) is a secondary plasticiser for wood and furniture coatings based on nitrocellulose, as well as acid-curing one and two-component finishes, paper varnishes, leather finishes, butyl ester of a special fatty acid mix...view more Efka® PL 5520 (formerly Dehysol® BS 20 N) is a secondary plasticiser for wood and furniture coatings based on nitrocellulose, as well as acid-curing one and two-component finishes, paper varnishes, leather finishes, butyl ester of a special fatty acid mixture. It is a slightly yellowish liquid of low viscosity. view less | |
| Efka® PL 5544 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PL 5544 (formerly Dehysol® 344) is a highly viscous migration-resistant plasticizer for PVC plastics, coatings, including cellophane and aluminium coatings, printing inks and related applications. This product is insoluble in water. It is, however, ...view more Efka® PL 5544 (formerly Dehysol® 344) is a highly viscous migration-resistant plasticizer for PVC plastics, coatings, including cellophane and aluminium coatings, printing inks and related applications. This product is insoluble in water. It is, however, miscible in all proportions with almost all aliphatic, cycloaliphatic and aromatic hydrocarbons normally used in the processing of plastics and surface coating resins. It is a light yellow liquid dimethyl cyclohexyl phthalate. view less | |
| Efka® PL 5590 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PL 5590 (formerly Dehysol® 190) is an ester of an aliphatic monocarboxylic acid used as plasticizer for plastisols. | |
| EFKA® PU 4010 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, impr...view more EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, improved gloss, prevention of flooding and floating problems and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4010 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4010 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. view less | |
| EFKA® PU 4046 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4046 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. EFKA® PU 4046 is ...view more EFKA® PU 4046 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. EFKA® PU 4046 is used for all kinds of solvent-based coatings as well as pigment concentrates. view less | |
| EFKA® PU 4047 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4047 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. The higher molecu...view more EFKA® PU 4047 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. The higher molecular weight of EFKA® PU 4047 compared to EFKA® PU 4046 gives stronger deflocculation results with some organic pigments and carbon blacks. In spite of its higher molecular weight, EFKA® PU 4047 has a wide compatibility with all kinds of resins. Pigment concentrates based on EFKA® PU 4047 show lower viscosity than concentrates made with any other EFKA® polymeric dispersants and can even be used in pure let downs based on white spirit. view less | |
| EFKA® PU 4050 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4050 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...view more EFKA® PU 4050 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. view less | |
| EFKA® PU 4061 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4061 a polymeric dispersant for stabilizing inorganic and organic pigments. This results in improved gloss and DOI, reduced flooding problems, higher color strength and lower viscosity. EFKA® PU 4061 is used in all types of solvent-based coatings...view more EFKA® PU 4061 a polymeric dispersant for stabilizing inorganic and organic pigments. This results in improved gloss and DOI, reduced flooding problems, higher color strength and lower viscosity. EFKA® PU 4061 is used in all types of solvent-based coatings, particularly high-quality industrial coatings such as automotive topcoats (OEM and refinish), coil coatings and 2-pack polyurethane coating systems. It is also suitable for use in pigment concentrates. view less | |
| EFKA® PU 4063 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4063 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. EFKA® PU 4063 reduces the dispersing time an...view more EFKA® PU 4063 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. EFKA® PU 4063 reduces the dispersing time and the mill base viscosity and thus facilitates the formulation of highly concentrated pigment pastes. After the pigment paste has been blended into paint, EFKA® PU 4063 prevents flooding and floating of pigments and promotes excellent gloss and high color intensity. This product is readily compatible with a wide range of binder types. Pigment pastes based on EFKA® PU 4063 can therefore be used in 2-component polyurethane paints, 2 - component epoxy paints, unsaturated polyester, stoving paints and air drying paints. view less | |
| EFKA® PU 4080 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4080 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for automotive OEM and refinish topcoats, coil coatings and other high quality industrial ...view more EFKA® PU 4080 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for automotive OEM and refinish topcoats, coil coatings and other high quality industrial solvent born coatings. It is also suitable for use in pigment concentrates. view less | |
| EFKA® PX 4300 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PX 4300 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX...view more EFKA® PX 4300 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4300 is suitable for stabilizing pigments in solvent-based coatings. This results in: high color strength, good stability against flooding, floating and flocculation, and strong viscosity-depressing effects. view less | |
| EFKA® PX 4310 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PX 4310 is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. This product is suitable for industrial and automotive c...view more EFKA® PX 4310 is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. This product is suitable for industrial and automotive coatings. It offers high efficiency in stabilizing pigments and demonstrates a wide compatibility with many solvent-based resin systems. view less | |
| EFKA® PX 4320 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PX 4320 is a high-molecular-weight dispersing agent. It is is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA®...view more EFKA® PX 4320 is a high-molecular-weight dispersing agent. It is is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4320 is suitable for solvent-based industrial and automotive coatings. It also offers high efficiency in stabilizing pigments and demonstrates a wide compatibility with many resin systems. This makes EFKA® PX 4320 ideally suited for use of the concept of Resin-Free Pigment Concentrates (RFPC). view less | |
| EFKA® PX 4330 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PX 4330 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX...view more EFKA® PX 4330 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4330 is suitable for stabilizing pigments in solvent-based coatings. This product, due to the very wide compatibility in most current systems used in solvent-based coatings, is especially suitable for the production of Resin Minimal Pigment Concentrates (RMPC) in combination with a multi compatible dispersing resin. view less | |
| EFKA® PX 4340 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PX 4340 is a high molecular weight dispersing agent for deflocculation of organic pigments in solvent based systems. It is specially designed for use in solvent-based high-end performance coatings systems, such as automotive OEM and refinish. It als...view more EFKA® PX 4340 is a high molecular weight dispersing agent for deflocculation of organic pigments in solvent based systems. It is specially designed for use in solvent-based high-end performance coatings systems, such as automotive OEM and refinish. It also is highly suitable for CAB base-coats and all topcoats. EFKA® PX 4340, due to the very wide compatibility in most current systems used in solvent-based coatings, is especially suitable for the production of Resin Minimal Pigment Concentrates (RMPC) in combination with a multi compatible dispersing resin. view less | |
| EFKA® PX 4701 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PX 4701 is a 100 % active dispersant of the acrylic block co-polymer family made by Controlled Free Radical Polymerization. It is well suitable for UV- curable, solvent- and water-based ink formulations. It is especially recommended for high-perform...view more EFKA® PX 4701 is a 100 % active dispersant of the acrylic block co-polymer family made by Controlled Free Radical Polymerization. It is well suitable for UV- curable, solvent- and water-based ink formulations. It is especially recommended for high-performance systems such as inkjet inks, UV- curable and water-based flexographic inks. view less | |
| Efka® PX 4702 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PX 4702 (formerly Efka® 7702) is a 50% active dispersant of the acrylic block copolymer family made by Controlled Free Radical Polymerization (CFRP), which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispe...view more Efka® PX 4702 (formerly Efka® 7702) is a 50% active dispersant of the acrylic block copolymer family made by Controlled Free Radical Polymerization (CFRP), which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity. It is for water-based ink formulations and especially recommended for high-performance systems such as ink-jet inks and resin-free pigment concentrates (RFPC). view less | |
| Efka® PX 4731 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PX 4731 (formerly Efka® 7731) is a dispersant developed specifically for inkjet inks to provide the critical combination of strong viscosity suppression and excellent storage stability. It is based on a proprietary process. It is particularly effect...view more Efka® PX 4731 (formerly Efka® 7731) is a dispersant developed specifically for inkjet inks to provide the critical combination of strong viscosity suppression and excellent storage stability. It is based on a proprietary process. It is particularly effective in UV-curable systems and in mild-solvent systems based, for example, on glycol ethers. Efka® PX 4731 is a solvent-free liquid product which is 100 % active. As such it is potentially suitable for use in any UV-curable ink system including UV-curable flexographic and screen inks. It is also well suitable for UV-curable and even solvent-based resinfree pigment concentrates (RFPC) for a wide range of applications. The product is somewhat less polar in nature than Efka® PX 4732. view less | |
| EFKA® RM 1900 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® RM 1900 is a thickening agent in micronised form for nonaqueous coatings. It is particularly intended for use in paint manufacturing processes involving relatively high working temperatures. EFKA® RM 1900 produces very strong thixotropic effects in ...view more EFKA® RM 1900 is a thickening agent in micronised form for nonaqueous coatings. It is particularly intended for use in paint manufacturing processes involving relatively high working temperatures. EFKA® RM 1900 produces very strong thixotropic effects in solvent based coatings. However, the type of solvent is of decisive importance to its thixotropic behavior. The solvents should mainly consist of mineral spirits and aromatics. A combination with esters, ketones and alcohols is possible up to certain limits. This white, microfine powder is a modified hydrogenated castor oil. EFKA® RM 1900 is suitable as a rheology additive for solvent based and solvent-free systems such as epoxy resin paints, plastisols, caulking compounds, putties and knifing fillers. view less | |
| EFKA® RM 1920 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films ...view more EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films on vertical surfaces is effectively prevented whilst the working and flow properties are also generally improved. Pigment settling is also substantially reduced. EFKA® RM 1920 can be used in most non-aqueous coatings both with and without solvents. The lower the polarity of the coating, the better is its performance. view less | |
| EFKA® SI 2022 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2022 is a silicone-based defoamer for both solvent-based and solvent-free coatings. It prevents the formation of foam and blisters during the manufacturing and application of sloventborne and solvent-free coatings. This product is used for 2-pack...view more EFKA® SI 2022 is a silicone-based defoamer for both solvent-based and solvent-free coatings. It prevents the formation of foam and blisters during the manufacturing and application of sloventborne and solvent-free coatings. This product is used for 2-pack systems, stoving enamels, and air drying industrial coatings. view less | |
| EFKA® SI 2023 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2023 is a silicone-based defoamer for solvent-based coatings. It is a solution of defoaming substances containing silicone that prevents the formation of foam and blisters during the manufacturing and application of solvent-based coatings. Recomm...view more EFKA® SI 2023 is a silicone-based defoamer for solvent-based coatings. It is a solution of defoaming substances containing silicone that prevents the formation of foam and blisters during the manufacturing and application of solvent-based coatings. Recommended applications for this product include: two pack systems based on polyurethane and epoxy resins, especially suited for polyurethane-based wood finishes applied, by curtain coating, acid curing and nitrocellulose systems, and oil free polyester systems. view less | |
| Efka® SI 2028 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SI 2028 (formerly Efka® 2028) prevents the formation of foam and blisters during the manufacturing and application of solventborne wood finishes. Used for polyurethane coatings, unsaturated polyester systems, acid curing coatings, and NC lacquers. | |
| EFKA® SI 2722 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in ...view more EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy systems and solvent-free polyurethane systems. view less | |
| EFKA® SI 2723 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth...view more EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. On the other hand, it presents the advantage of low odor. EFKA® SI 2723 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy and polyurethane systems, low odor, high-solids two-pack systems and solvent-free radiation-curable systems. view less | |
| Efka® SI 2741 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SI 2741 (formerly Efka® 7241) prevents the entrapment of air during processing steps such as pigment dispersion, blending and pumping. It reduces the accumulation of foam in the ink pan or reservoir during the printing process. Efka® SI 2741 has bee...view more Efka® SI 2741 (formerly Efka® 7241) prevents the entrapment of air during processing steps such as pigment dispersion, blending and pumping. It reduces the accumulation of foam in the ink pan or reservoir during the printing process. Efka® SI 2741 has been developed for solvent-based formulations, and it can be used in solvent-based pigment bases and printing inks. This product is particularly effective in nitrocellulose-based systems. Efka® SI 2741 may also be used in gravure and flexographic printing. view less | |
| EFKA® SL 3030 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysil...view more EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. view less |
