| Baymedix® AP501 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® FP503 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| Desmocap® 11 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmocap® 11 has a viscosity at 23℃ of 100,000 ± 25,000. It is a branched polymer with ether and urethane groups, used as a raw material for use in the flexiblization of epoxy resins and the formulation of flexible coatings and sealing compounds. Desmocap...view more Desmocap® 11 has a viscosity at 23℃ of 100,000 ± 25,000. It is a branched polymer with ether and urethane groups, used as a raw material for use in the flexiblization of epoxy resins and the formulation of flexible coatings and sealing compounds. Desmocap® 11 can be used to formulate curable, liquid, solvent-free polyurethane systems. The polyamines normally used with epoxy resins are suitable curing agents. view less | |
| Desmocap® 12 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmocap® 12 is a linear polymer with ether and urethane groups, used as a raw material for the flexiblization of epoxy resins and in the formulation of flexible coatings and sealants. This product has a viscosity at 23°C of 40,000 ± 12,000. Desmocap® 12 ...view more Desmocap® 12 is a linear polymer with ether and urethane groups, used as a raw material for the flexiblization of epoxy resins and in the formulation of flexible coatings and sealants. This product has a viscosity at 23°C of 40,000 ± 12,000. Desmocap® 12 can be used to formulate curable, liquid, solvent-free polyurethane systems. The polyamines normally used with epoxy resins are suitable curing agents. view less | |
| Desmodur® E 1160 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing, one-pack polyurethane coatings. It has an NCO content of 5.4 ± 0.3%, a non-volatile matter of 60.0 ± 2.0, a viscosity...view more Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing, one-pack polyurethane coatings. It has an NCO content of 5.4 ± 0.3%, a non-volatile matter of 60.0 ± 2.0, a viscosity (23°C) of 550 ± 200, and a color (Iodine) of ≤ 3. Desmodur® E 1160 MPA/X is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and mechanical damage. view less | |
| Desmodur® E 22 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 22 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. It can be used in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible a...view more Desmodur® E 22 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. It can be used in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible aggregates, roof and concrete sealers and rubber granules. This product has an NCO content of 8.6 ± 0.3%, a viscosity at 23°C of 2,800 ± 400 mPa·s, and an equivalent weight of 472-506. Desmodur® E 22 is suitable for the flexibilization of Desmodur® E 21/E 23 or similar products and as a binder for rubber granules. Desmodur® E 22 is also suitable for use in the formulation of solvent-free moisture-curing one-component adhesives or in combination with Baycoll to formulate two-component adhesives. These can be used to bond many materials, e.g. wood, metal and plastic. view less | |
| Desmodur® E 3265 MPA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 3265 MPA/SN is an aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate (HDI). It is ideal for use in the formulation of moisture-curing, one-component polyurethane coatings with good weather stability. It has an non-volatile...view more Desmodur® E 3265 MPA/SN is an aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate (HDI). It is ideal for use in the formulation of moisture-curing, one-component polyurethane coatings with good weather stability. It has an non-volatile content of 65.0 ± 2.0%, a color value (Iod) of ≤ 4, and a monomeric HDI of < 0.5%. Desmodur® E 3265 MPA/SN is suitable for use in the formulation of weather-stable and colorfast outdoor coatings with very good resistance to solvents, abrasion and chemicals. view less | |
| Desmodur® LS 2424 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® LS 2424 is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content. It is used in the formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Desmodur® LS 2424 ...view more Desmodur® LS 2424 is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content. It is used in the formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Desmodur® LS 2424 is an isomeric mixture of monomeric diphenylmethane diisocyanate that is liquid at temperatures above 20 °C. Storage and handling are greatly simplified compared to 4,4' isomer that is solid at room temperature (Desmodur® 44 M, Desmodur® 44 MC). This product has a vapor pressure at 20°C (MDI) of < 10^-5 hPa, a phenyl isocyanate content of max. 10ppm, and a degree of purity (MG 250) of min. 99.5% by wt. view less | |
| Desmodur® XP 2617 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® XP 2617 is a largely linear NCO prepolymer based on hexamethylene diisocyanate. It is used in combination with suitable polyether polyols as a co-reactant for polyurethane reactive systems when polyfunctional (branched) and aromatic isocyanate c...view more Desmodur® XP 2617 is a largely linear NCO prepolymer based on hexamethylene diisocyanate. It is used in combination with suitable polyether polyols as a co-reactant for polyurethane reactive systems when polyfunctional (branched) and aromatic isocyanate components cannot be used. Care must be taken during compounding, transfer, etc. to exclude moisture as even the slightest traces of moisture adversely affect storage stability. It must be ensured that the containers including those that are empty are kept sealed. Above all, contact with water must be prevented as it reacts with Desmodur® XP 2617 to form polyureas and carbon dioxide. view less | |
| Priplast 3162 | Croda 禾大 | Priplast 3162 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings (PUD) for excellent wetting of rigid and fibrous substrates providing hardness, flexibility and good adhesion. | |
| Priplast 3172 | Croda 禾大 | Priplast 3172 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives for excellent durability and adhesion. | |
| Priplast 3190 | Croda 禾大 | Priplast 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatibility with polyether and polyester polyols. | |
| PRIPLAST 3192 | Croda 禾大 | Semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. | |
| PRIPOL 1006 | Croda 禾大 | High purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. Provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. | |
| Pripol™ 1006 F – Food Contact Approved Dimer Acid (Distilled and Hydrogenated) | Croda 禾大 | Pripol™ 1006 F is a food contact approved hydrogenated dimer acid building block for use in polyester, polyamide and epoxy systems. It offers flexibility, colour and heat stability. | |
| Pripol™ 1009 F – Food Contact Approved Dimer Acid (Distilled and Hydrogenated) | Croda 禾大 | Pripol™ 1009 F is a food contact approved hydrogenated and distilled dimer acid building block for use in polyester and polyamide systems. It offers flexibility, hydrophobicity and low colour. It has a very high purity and is therefore suitable for use in...view more Pripol™ 1009 F is a food contact approved hydrogenated and distilled dimer acid building block for use in polyester and polyamide systems. It offers flexibility, hydrophobicity and low colour. It has a very high purity and is therefore suitable for use in very high molecular weight linear polymers. view less | |
| Pripol™ 1010 F – Food Contact Approved Dimer Acid (Distilled and Hydrogenated) | Croda 禾大 | Pripol™ 1010 F is a food contact approved hydrogenated and distilled dimer acid building block for use in polyester, polyamide and epoxy systems. It offers flexibility, colour and heat stability. | |
| PRIPOL 1012 | Croda 禾大 | High purity dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. Provides water repellency, flexibility and excellent hydrolysis / chemical resistan...view more High purity dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. Provides water repellency, flexibility and excellent hydrolysis / chemical resistance. view less | |
| PRIPOL 1013 | Croda 禾大 | High purity dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. Provides water repellency, flexibility and excellent hydrolysis / chemical resistance. | |
| PRIPOL 1017 | Croda 禾大 | Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. Provides water repellency, flexibility and excellent hydrolysis / chemical resistance. | |
| PRIPOL 1022 | Croda 禾大 | Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. Provides water repellency, flexibility and excellent hydrolysis / chemical resistance. Lower viscosity grade. | |
| PRIPOL 1025 | Croda 禾大 | Hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. Provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. | |
| Pripol™ 1025 F – Food Contact Approved Dimer Acid (Hydrogenated) | Croda 禾大 | Pripol™ 1025 F is a food contact approved hydrogenated dimer acid building block for use in polyester, polyamide and epoxy systems. It offers flexibility, colour and heat stability. | |
| PRIPOL 2033 | Croda 禾大 | Dimer diol building block with high difunctionality for polyurethane and polyester coatings, adhesives and elastomers. Provides good colour, water repellency, flexibility, thermo-oxidative stability and outstanding hydrolysis / chemical resistance. |
