| Genamin® C 050 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin gr...view more Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® C 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grad...view more Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® C 150 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® C 150 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 15 mol EO. This grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin gra...view more Genamin® C 150 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 15 mol EO. This grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® C 200 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® C 200 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 20 mol EO. This grade is made of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grad...view more Genamin® C 200 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 20 mol EO. This grade is made of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® CC 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CC 100 is a raw material for the manufacture of fatty amine ethoxylates and fatty amine salts. This grade is composed of primary fatty alkylamines. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in ...view more Genamin® CC 100 is a raw material for the manufacture of fatty amine ethoxylates and fatty amine salts. This grade is composed of primary fatty alkylamines. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. Genamin® 100 (D) grades are used as antistatic agents, flotation agents, anti-caking agents, corrosion inhibitors, and as an emulsifier for resin. Furthermore, they are applied in pigments and in the textile and leather industry. view less | |
| Genamin® CC 100 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CC 100 D is a raw material for the chemical-technological industry. This grade is composed of a liquid coconut fatty amine, dist. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents s...view more Genamin® CC 100 D is a raw material for the chemical-technological industry. This grade is composed of a liquid coconut fatty amine, dist. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. This product is used as a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is also applied as an antistatic agent, flotation agent, anti-caking agent, emuslifier for resin, and corrosion inhibitor. Furthermore, it is used in the textile and leather industry. view less | |
| Genamin® CC 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CC 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfactants. These water insoluble tertiary amines can be rea...view more Genamin® CC 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfactants. These water insoluble tertiary amines can be readily converted to water-soluble salts, quaternary ammonium compounds, often referred to simply as "quats", are the most important. Like cationic surfactants generally, they have substantivity for most materials, e.g. glass and cotton. This property is utilized in many different industries, e.g. the textile, petroleum and polish industries. Closely allied to this substantivity are the excellent disinfectant and preservative properties of these compounds. This grade is composed of dimethyl coconut fatty amine, dist. view less | |
| Genamin® CC 500 A | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CC 500 A is a raw material for the chemical-technological industry. This product is composed of coconut fatty amine acetate. It is used as a floatation aid and anti-caking aid for certain minerals. It is also applied as an antistatic agent, hydro...view more Genamin® CC 500 A is a raw material for the chemical-technological industry. This product is composed of coconut fatty amine acetate. It is used as a floatation aid and anti-caking aid for certain minerals. It is also applied as an antistatic agent, hydrophobing agent for pigments, corrosion inhibitor, and emulsifier. Furthermore, this product is used in the textile and leather industries. view less | |
| Genamin® CC 500 E | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CC 500 E is a cationic emulsifier for the chemical-technological industry. This light brown paste is composed of coconut fatty amine oleate. It is used as a demolding agent for the building industry. After storage of some months the color of the ...view more Genamin® CC 500 E is a cationic emulsifier for the chemical-technological industry. This light brown paste is composed of coconut fatty amine oleate. It is used as a demolding agent for the building industry. After storage of some months the color of the product may become darker. view less | |
| Genamin® CHP 100 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CHP 100 D is a raw material for the chemical-technological industry. This colourless, clear liquid is composed of N-cyclohexyl-1,3- propane diamine, dist. | |
| Genamin® CS 200 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CS 200 is a raw material for the chemical-technological industry. It is used as a starting material for quaternary ammonium compounds. This white up to light yellow paste/wax is composed of dicoco alkyl amine. | |
| Genamin® CS 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CS 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfactants. These water insoluble tertiary amines can be rea...view more Genamin® CS 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfactants. These water insoluble tertiary amines can be readily converted to water-soluble salts, quaternary ammonium compounds, often referred to simply as "quats", are the most important. Like cationic surfactants generally, they have substantivity for most materials, e.g. glass and cotton. This property is utilized in many different industries, e.g. the textile, petroleum and polish industries. Closely allied to this substantivity are the excellent disinfectant and preservative properties of these compounds. This grade is composed of dimethyl coconut fatty amine, dist. view less | |
| Genamin® LA 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® LA 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfactants. These water insoluble tertiary amines can be rea...view more Genamin® LA 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfactants. These water insoluble tertiary amines can be readily converted to water-soluble salts, quaternary ammonium compounds, often referred to simply as "quats", are the most important. Like cationic surfactants generally, they have substantivity for most materials, e.g. glass and cotton. This property is utilized in many different industries, e.g. the textile, petroleum and polish industries. Closely allied to this substantivity are the excellent disinfectant and preservative properties of these compounds. This grade is composed of dimethyl tetradecyl amine, dist. view less | |
| Genamin® LAP 100 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® LAP 100 D is a raw material for the chemical-technological industry. This pasty to waxy substance is composed of lauryl propylene diamine, dist. It can be applied in detergents, pigment dispersions, and in the textile and leather industry. It is ...view more Genamin® LAP 100 D is a raw material for the chemical-technological industry. This pasty to waxy substance is composed of lauryl propylene diamine, dist. It can be applied in detergents, pigment dispersions, and in the textile and leather industry. It is also used as an emulsifier, corrosion inhibitor, flotation agent, and chemical intermediate. view less | |
| Genamin® MY 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® MY 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. It is composed of dimethyl myristyl amine, dist. Dimethyl fatty alkylamines are liquid or pasty, water insoluble bases. They are readily s...view more Genamin® MY 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. It is composed of dimethyl myristyl amine, dist. Dimethyl fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. The basicity of the dimethyl fatty amines is slightly less marked than that of primary and secondary fatty amines. view less | |
| Genamin® O 020 Special | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic...view more Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® O 080 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® O 080 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is composed of oleylamine with 8 mol EO. The "O" group (Oleylamine) is distinguished as predominantly unsaturated C18 fatty amines. Genamin gra...view more Genamin® O 080 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is composed of oleylamine with 8 mol EO. The "O" group (Oleylamine) is distinguished as predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® O 200 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic...view more Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® OL 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® OL 100 is a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is used as an antistatic agent, flotation agent, anti-caking agent, corrosion inhibitor, and as an emulsifier for resin. Furthermore, this product i...view more Genamin® OL 100 is a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is used as an antistatic agent, flotation agent, anti-caking agent, corrosion inhibitor, and as an emulsifier for resin. Furthermore, this product is applied in pigments and in the textile and leather industry. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. This liquid, pasty grade is composed of soybean amine, dist. view less | |
| Genamin® OL 100 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® OL 100 D is a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is used as an antistatic agent, flotation agent, anti-caking agent, corrosion inhibitor, and as an emulsifier for resin. Furthermore, this product...view more Genamin® OL 100 D is a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is used as an antistatic agent, flotation agent, anti-caking agent, corrosion inhibitor, and as an emulsifier for resin. Furthermore, this product is applied in pigments and in the textile and leather industry. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. This liquid, pasty grade is composed of soybean amine, dist. view less | |
| Genamin® OLP 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® OLP 100 is a raw material for the chemical-technological industry. It is used in detergents, pigment dispersions, as an emulsifier, corrosion inhibitor and as a chemical intermediate. This liquid grade is composed of soybean propylenediamine. It ...view more Genamin® OLP 100 is a raw material for the chemical-technological industry. It is used in detergents, pigment dispersions, as an emulsifier, corrosion inhibitor and as a chemical intermediate. This liquid grade is composed of soybean propylenediamine. It is also used in processing, dispersing aids and crop applications. view less | |
| Genamin® S 020 Special | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® S 020 Special is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 2 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades ...view more Genamin® S 020 Special is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 2 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® S 080 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® S 080 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 8 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be c...view more Genamin® S 080 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 8 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® S 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® S 100 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 10 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be ...view more Genamin® S 100 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 10 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® S 120 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® S 120 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 12 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be ...view more Genamin® S 120 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 12 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® S 150 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® S 150 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 15 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be ...view more Genamin® S 150 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 15 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® S 200 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® S 200 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 20 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be ...view more Genamin® S 200 is a surfactant for the chemical-technological industry. This yellow to brown liquid is composed of stearylamine with 20 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® S 250 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® S 250 is a surfactant for the chemical-technological industry. This nearly white, pasty to waxy substance is composed of stearylamine with 25 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin...view more Genamin® S 250 is a surfactant for the chemical-technological industry. This nearly white, pasty to waxy substance is composed of stearylamine with 25 mol EO. The "S" grade means the group is distinguished by its saturated C16-C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® SH 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® SH 100 is a raw material for the chemical-techonological industry. This wax-like grade is composed of stearylamine. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral...view more Genamin® SH 100 is a raw material for the chemical-techonological industry. This wax-like grade is composed of stearylamine. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. This product is used as a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is also applied as an antistatic agent, flotation agent, anti-caking agent, emuslifier for resin, and corrosion inhibitor. Furthermore, it is used in the textile and leather industry. view less | |
| Genamin® SH 100 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® SH 100 D is a raw material for the chemical-techonological industry. This wax-like grade is composed of stearylamine, dist. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as...view more Genamin® SH 100 D is a raw material for the chemical-techonological industry. This wax-like grade is composed of stearylamine, dist. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. This product is used as a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is also applied as an antistatic agent, flotation agent, anti-caking agent, emuslifier for resin, and corrosion inhibitor. Furthermore, it is used in the textile and leather industry. view less | |
| Genamin® SH 200 FLA | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® SH 200 FLA is a raw material for the chemical-technological industry. These white to light yellow flakes are composed of bis-hydrogenated tallow amine, technical. Genamin® SH 200 FLA is a starting material for dialkyl methyl amines and quaternary...view more Genamin® SH 200 FLA is a raw material for the chemical-technological industry. These white to light yellow flakes are composed of bis-hydrogenated tallow amine, technical. Genamin® SH 200 FLA is a starting material for dialkyl methyl amines and quaternary ammonium compounds. view less | |
| Genamin® SH 200 V | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® SH 200 V is a raw material for the chemical-technological industry. This white to light yellow paste/wax is composed of C14-18-Dialkyl amine (vegetable origin). Genamin® SH 200 V is a starting material for dialkyl methyl amines and quaternary amm...view more Genamin® SH 200 V is a raw material for the chemical-technological industry. This white to light yellow paste/wax is composed of C14-18-Dialkyl amine (vegetable origin). Genamin® SH 200 V is a starting material for dialkyl methyl amines and quaternary ammonium compounds. view less | |
| Genamin® SH 200 V FLA | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® SH 200 V FLA is a raw material for the chemical-technological industry. These white to light yellow flakes are composed of C14-18-Dialkyl amine (vegetable origin). Genamin® SH 200 V FLA is a starting material for dialkyl methyl amines and quatern...view more Genamin® SH 200 V FLA is a raw material for the chemical-technological industry. These white to light yellow flakes are composed of C14-18-Dialkyl amine (vegetable origin). Genamin® SH 200 V FLA is a starting material for dialkyl methyl amines and quaternary ammonium compounds. view less | |
| Genamin® SH 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® SH 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. This grade is composed of dimethyl stearyl amine, dist. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfa...view more Genamin® SH 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. This grade is composed of dimethyl stearyl amine, dist. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfactants. These water insoluble tertiary amines can be readily converted to water-soluble salts, quaternary ammonium compounds, often referred to simply as "quats", are the most important. Like cationic surfactants generally, they have substantivity for most materials, e.g. glass and cotton. This property is utilized in many different industries, e.g. the textile, petroleum and polish industries. Closely allied to this substantivity are the excellent disinfectant and preservative properties of these compounds. view less | |
| Genamin® T 020 Special | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® T 020 Special is a surfactant for the chemical-technological industry. This yellowish to light brownish paste is composed of tallow fatty amine ethoxylate with 2 mol EO. The "T" (Tallow fatty amine) group is distinguished as saturated and unsatur...view more Genamin® T 020 Special is a surfactant for the chemical-technological industry. This yellowish to light brownish paste is composed of tallow fatty amine ethoxylate with 2 mol EO. The "T" (Tallow fatty amine) group is distinguished as saturated and unsaturated C16-C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® TA 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® TA 100 is a raw material for the chemical-techonological industry. This pasty, wax-like grade is composed of tallow fatty amine. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents su...view more Genamin® TA 100 is a raw material for the chemical-techonological industry. This pasty, wax-like grade is composed of tallow fatty amine. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. This product is used as a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is also applied as an antistatic agent, flotation agent, anti-caking agent, emuslifier for resin, and corrosion inhibitor. Furthermore, it is used in the textile and leather industry. view less | |
| Genamin® TA 100 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® TA 100 D is a raw material for the chemical-techonological industry. This pasty, wax-like grade is composed of tallow fatty amine, dist. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic sol...view more Genamin® TA 100 D is a raw material for the chemical-techonological industry. This pasty, wax-like grade is composed of tallow fatty amine, dist. Primary fatty alkylamines are liquid or pasty, water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. This product is used as a raw material for the manufacture of fatty amine ethoxilates and fatty amine salts. It is also applied as an antistatic agent, flotation agent, anti-caking agent, emuslifier for resin, and corrosion inhibitor. Furthermore, it is used in the textile and leather industry. view less | |
| Genamin® TA 200 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® TA 200 is a raw material for the chemical-technological industry. It is used as a starting material for quaternary ammonium compounds. This white to light yellow paste is composed of di-tallow fatty amine. | |
| Genamin® TA 302 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® TA 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. This grade is composed of dimethyl tallow fatty amine, dist. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of ...view more Genamin® TA 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. This grade is composed of dimethyl tallow fatty amine, dist. Dimethyl fatty alkylamines are valuable raw materials for the manufacture of surfactants. These water insoluble tertiary amines can be readily converted to water-soluble salts, quaternary ammonium compounds, often referred to simply as "quats", are the most important. Like cationic surfactants generally, they have substantivity for most materials, e.g. glass and cotton. This property is utilized in many different industries, e.g. the textile, petroleum and polish industries. Closely allied to this substantivity are the excellent disinfectant and preservative properties of these compounds. view less | |
| Genamin® TAP 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® TAP 100 is a raw material for the chemical-technological industry. This yellowish up to brownish soft paste is composed of tallow fatty propylene diamine. It is used in detergents, pigment dispersions, and the textile and and leather industry. Th...view more Genamin® TAP 100 is a raw material for the chemical-technological industry. This yellowish up to brownish soft paste is composed of tallow fatty propylene diamine. It is used in detergents, pigment dispersions, and the textile and and leather industry. This product is also applied as an emulsifier, corrosion inhibitor, emulsifier for bitumen, anti-stripping agent, flotation agent and chemical intermediate. view less | |
| Genamin® TAP 100 D | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® TAP 100 D is a raw material for the chemical-technological industry. This white to yellowish soft paste is composed of tallow fatty alkyl propylenediamine, dist. It is used in detergents, pigment dispersions, and the textile and and leather indus...view more Genamin® TAP 100 D is a raw material for the chemical-technological industry. This white to yellowish soft paste is composed of tallow fatty alkyl propylenediamine, dist. It is used in detergents, pigment dispersions, and the textile and and leather industry. This product is also applied as an emulsifier, corrosion inhibitor and chemical intermediate. view less | |
| Genapol® 1879 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® 1879 is a nonionic emulsifier for emulsion polymerization. It is composed of alkyl polyethylene glycol ether in water. Genapol® 1879 is a nonionic emulsifier for the chemical industry and is used as an emulsifier in oil/water systems and for emul...view more Genapol® 1879 is a nonionic emulsifier for emulsion polymerization. It is composed of alkyl polyethylene glycol ether in water. Genapol® 1879 is a nonionic emulsifier for the chemical industry and is used as an emulsifier in oil/water systems and for emulsion polymerization. Genapol® 1879 is suitable for use in the production of polymer dispersions based on vinyl acetate and comonomers, acrylic esters and comonomers and butadiene/styrene latices. This product stabilizes the polymer dispersion during and after polymerization and prevents coagulation. view less | |
| Genapol® 3214 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® 3214 is a nonionic emulsifier for emulsion polymerization. This colourless liquid is composed of alkyl polyethylene glycol ether in water. Genapol® 3214 is a nonionic emulsifier for the chemical industry and is used as an emulsifier in oil/water ...view more Genapol® 3214 is a nonionic emulsifier for emulsion polymerization. This colourless liquid is composed of alkyl polyethylene glycol ether in water. Genapol® 3214 is a nonionic emulsifier for the chemical industry and is used as an emulsifier in oil/water systems and for emulsion polymerization. Genapol® 3214 is suitable for use in the production of polymer dispersions based on vinyl acetate and comonomers, acrylic esters and comonomers and butadiene/styrene latices. It stabilizes the polymer dispersion during and after polymerization and prevents coagulation. view less | |
| Genapol® ED 3060 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of orga...view more Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of organic pigments like phthalocyanine blue or red and yellow azo pigments. view less | |
| Genapol® O 250 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® O 250 is a nonionic emulsifier for the chemical industry. This white wax is composed of cetyl/oleyl polyethylene glycol ether with 25 moles ethylene oxide. Genapol® O 250 is used in emulsion polymerization of the following monomers: vinyl acetate...view more Genapol® O 250 is a nonionic emulsifier for the chemical industry. This white wax is composed of cetyl/oleyl polyethylene glycol ether with 25 moles ethylene oxide. Genapol® O 250 is used in emulsion polymerization of the following monomers: vinyl acetate together with acrylates, vinyl chloride or ethylene; and acrylate and acrylate / styrene dispersions. Genapol® O 250 prevents the polymer dispersion from coagulation and improves electrolyte resistance and freeze/thaw stability. Genapol® O 250 is also used as a dispersing agent for pigment preparations and as an emulsifier for waxes and organic solvents. view less | |
| Genapol® O 300 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® O 300 is a nonionic emulsifier for the chemical industry. This white wax is composed of oleic alcohol polyethylene glycol ether with 30 moles ethylene oxide. Genapol® O-300 is used in emulsion polymerization of the following monomers: vinyl aceta...view more Genapol® O 300 is a nonionic emulsifier for the chemical industry. This white wax is composed of oleic alcohol polyethylene glycol ether with 30 moles ethylene oxide. Genapol® O-300 is used in emulsion polymerization of the following monomers: vinyl acetate together with acrylates, vinyl chloride or ethylene; and acrylate and acrylate / styrene dispersions. Genapol® O-300 prevents the polymer dispersion from coagulation and improves electrolyte resistance and freeze/thaw stability. Genapol® O-300 is also used as a dispersing agent for pigment preparations and as an emulsifier for waxes and organic solvents. view less | |
| Genapol® PF 10 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® PF 10 is a low foaming, nonionic surfactant for the chemical industry. This clear, colorless liquid is composed of a block copolymer of propylene oxide and ethylene oxide, containing 10% w/w ethylene oxide. Genapol® PF 10 has good wetting and dis...view more Genapol® PF 10 is a low foaming, nonionic surfactant for the chemical industry. This clear, colorless liquid is composed of a block copolymer of propylene oxide and ethylene oxide, containing 10% w/w ethylene oxide. Genapol® PF 10 has good wetting and dispersing action coupled with low foaming tendency. Within the Genapol® PF series, the products with a lower degree of ethoxylation have a better foam-suppressing effect than the products with a higher degree of ethoxylation. Genapol® PF 10 is used as a low-foaming surfactant and defoamer in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle-rinsing machines and industrial cleaning formulations. To clarify aqueous solutions of the product, the addition of solubilizers such as ethanol or isopropanol is required. Genapol® PF 10 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | |
| Genapol® PF 20 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product...view more Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product is a slightly cloudy, colorless liquid that is composed of block copolymer of propylene oxide and ethylene oxide, containing 20% w/w ethylene oxide. Genapol® PF 20 has good wetting and dispersing action coupled with low foaming tendency. Within the Genapol® PF series, the products with a lower degree of ethoxylation have a better foam-suppressing effect than the products with a higher degree of ethoxylation. Typical applications include rinsing aids, detergents for dishwashers and bottle-rinsing machines and industrial cleaning formulations. view less | |
| Genapol® PF 40 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...view more Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | |
| Genapol® PF 80 Powder | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 80 powder is resistant to water hardness salts and to ac...view more Genapol® PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 80 powder is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This product has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 80 powder is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components. Genapol® PF 80 powder is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | |
| Genapol® PL 120 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® PL 120 is a low foaming, nonionic surfactant for the chemical industry. This cloudy liquid is composed of fatty alcohol EO/PO-Adduct. It is used as a low foaming wetting agent for paints and coatings. This product is unaffected by water hardness ...view more Genapol® PL 120 is a low foaming, nonionic surfactant for the chemical industry. This cloudy liquid is composed of fatty alcohol EO/PO-Adduct. It is used as a low foaming wetting agent for paints and coatings. This product is unaffected by water hardness constituents, and it is considerably resistant to aqueous acids and alkalis. As a nonionic surfactant, it can be used in combination with other nonionic compounds and with anionic and cationic substances. view less | |
| Genapol® T 800 Powder | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® T 800 Powder is a nonionic surfactant for the chemical-technological industry. This white powder is composed of fatty alcohol polyglycol ether with 80 mol EO based on saturated C16-C18 alcohol. As a nonionic surface active substance Genapol® T 80...view more Genapol® T 800 Powder is a nonionic surfactant for the chemical-technological industry. This white powder is composed of fatty alcohol polyglycol ether with 80 mol EO based on saturated C16-C18 alcohol. As a nonionic surface active substance Genapol® T 800 powder can be combined with other nonionic, anionic and cationic products. It is used as a wetting agent for powder coatings and concrete. This product is also used as an emulsifier and dispersing agent for pigment pastes, paints and binders. view less | |
| Genapol® X 020 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 020 is a nonionic surfactant for the chemical industry. This colourless, turbid liquid is composed of isotridecyl polyethylene glycol ether with 2 moles ethylene oxide. It is compatible with anionic, cationic and other nonionic surfactants and ...view more Genapol® X 020 is a nonionic surfactant for the chemical industry. This colourless, turbid liquid is composed of isotridecyl polyethylene glycol ether with 2 moles ethylene oxide. It is compatible with anionic, cationic and other nonionic surfactants and resistant against strong alkaline and acid solutions. Genapol® X 020 is used as a wetting agent and emulsifier e.g. in detergents, industrial & institutional cleaners or in wax and silicon emulsions. view less | |
| Genapol® X 050 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 050 is a nonionic emulsifier for the chemical industry. This colourless, clear liquid is compatible with anionic, cationic and other nonionic surfactants and resistant against strong alkaline and acid solutions. Genapol® X 050 is used as a wett...view more Genapol® X 050 is a nonionic emulsifier for the chemical industry. This colourless, clear liquid is compatible with anionic, cationic and other nonionic surfactants and resistant against strong alkaline and acid solutions. Genapol® X 050 is used as a wetting agent and emulsifier e.g. in detergents, industrial & institutional cleaners or in wax and silicon emulsions. view less | |
| Genapol® X 089 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 089 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 8 moles ethylene oxide. Genapol® X 089 is used as a wetting agent, emulsifier and dispersing agent e.g. in detergents, industri...view more Genapol® X 089 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 8 moles ethylene oxide. Genapol® X 089 is used as a wetting agent, emulsifier and dispersing agent e.g. in detergents, industrial & institutional cleaners, in emulsion polymerization or in wax and silicon emulsions. This product is compatible with anionic, cationic and other nonionic surfactants and is resistant against strong alkaline and acid solutions. view less | |
| Genapol® X 090 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 090 is a nonionic emulsifier for the chemical industry. This colorless, turbid liquid is compatible with anionic, cationic and other nonionic surfactants and is resistant against strong alkaline and acid solutions. Genapol® X 090 is used as a w...view more Genapol® X 090 is a nonionic emulsifier for the chemical industry. This colorless, turbid liquid is compatible with anionic, cationic and other nonionic surfactants and is resistant against strong alkaline and acid solutions. Genapol® X 090 is used as a wetting agent, emulsifier and dispersing agent e.g. in detergents, industrial & institutional cleaners, in emulsion polymerization or in wax and silicon emulsions. view less | |
| Genapol® X 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. ...view more Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. This product is also available as Genapol® X 100 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 61.7%. view less | |
| Genapol® X 1000 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 1000 is a nonionic emulsifier for the chemical industry. This white wax is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1000 can be used as an emulsifier for bitumen emulsions and emulsion polymeriz...view more Genapol® X 1000 is a nonionic emulsifier for the chemical industry. This white wax is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1000 can be used as an emulsifier for bitumen emulsions and emulsion polymerization. view less | |
| Genapol® X 1003 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electroly...view more Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1003 is added to the emulsion either before, during or after the polymerization process. This product can be used as an emulsifier for bitumen emulsions. view less | |
| Genapol® X 1005 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, du...view more Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, during or after the polymerization process. This product can also be used as an emulsifier for bitumen emulsions. view less | |
| Genapol® X 108 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 108 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 10 mole ethylene oxide. This product is used in detergents, industrial & institutional cleaners, in emulsion polymerization or ...view more Genapol® X 108 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 10 mole ethylene oxide. This product is used in detergents, industrial & institutional cleaners, in emulsion polymerization or in wax and silicon emulsions. view less | |
| Genapol® X 158 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 158 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 158 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate d...view more Genapol® X 158 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 158 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate dispersions to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. This product is used either during or after polymerization. view less | |
| Genapol® X 208 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 208 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 20 mole ethylene oxide. Genapol® X 208 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate d...view more Genapol® X 208 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 20 mole ethylene oxide. Genapol® X 208 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate dispersions to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 208 is used either during or after polymerization. view less | |
| Genapol® X 307 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styren...view more Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation and improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. view less | |
| Genapol® X 407 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw st...view more Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. This product is also available as Genapol® X 407 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 86%. view less | |
| Hostapal® BV conc. | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostapal® BV conc. is an anionic emulsifier for the chemical industry. As an anionic surfactant, it is compatible with other anionic and nonionic surfactants. With cationic surfactants, water-insoluble neutral salts are formed. Hostapal® BV conc. is resis...view more Hostapal® BV conc. is an anionic emulsifier for the chemical industry. As an anionic surfactant, it is compatible with other anionic and nonionic surfactants. With cationic surfactants, water-insoluble neutral salts are formed. Hostapal® BV conc. is resistant to caustic soda and water hardness. It acts as a lime soap dispersant and has high dispersing power for water-insoluble substances. In mineral acid solutions at elevated temperatures, Hostapal® BV conc. like all ether sulfates tends to hydrolyse. Hostapal® BV conc. is used as an emulsifier in the polymerization of the following monomers: vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene; for acrylic and styrene / acrylic dispersions; for butadiene / styrene latex. Hostapal® BV conc. is also employed as an emulsifier for oils and organic solvents and as a dispersing agent for inorganic and organic pigments such as titanium dioxide, iron oxides, metal pigments, polycylcic organic pigments and metal complex pigments. view less | |
| Hostapal® BV Liquid | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostapal® BV Liquid is an anionic emulsifier for the chemical industry. It is composed of tri-sec.-butyl phenol polyethylene glycol ether sulphate with 7 moles ethylene oxide, sodium salt. This product is compatible with other anionic and nonionic surfact...view more Hostapal® BV Liquid is an anionic emulsifier for the chemical industry. It is composed of tri-sec.-butyl phenol polyethylene glycol ether sulphate with 7 moles ethylene oxide, sodium salt. This product is compatible with other anionic and nonionic surfactants. Hostapal® BV liquid is resistant to caustic soda and water hardness. In mineral acid solutions at elevated temperatures, Hostapal® BV liquid like all ether sulfates tends to hydrolyse. It is used in the polymerization of vinyl acetate, together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadiene / styrene latex. view less | |
| Hostapal® FA | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostapal® FA is an auxiliary for the textile and leather industry. This clear liquid is composed of fatty alcohol polyglycol ether. It is applied in textile pretreatment, bleaching, washing and soaping. Hostapal® FA is also used as a degreaser for the lea...view more Hostapal® FA is an auxiliary for the textile and leather industry. This clear liquid is composed of fatty alcohol polyglycol ether. It is applied in textile pretreatment, bleaching, washing and soaping. Hostapal® FA is also used as a degreaser for the leather industry. view less | |
| Hostaphat® 1306 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostaphat® 1306 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used in the following applications: as emulsifier in emulsion ...view more Hostaphat® 1306 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50), acid form. It is used in the following applications: as emulsifier in emulsion polymerization, 0,5 – 1,5 % on monomers; as dispersing agent for pigments in aqueous dispersions, 10 – 30 % on pigments; and as wetting agent and detergents in vehicle and metal cleaning and textile finishing processes, general recommendation: 1 – 3 g/l. view less | |
| Hostaphat® A 25 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostaphat® A 25 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50) ammonium salt. Hostaphat® A 25 is used in the following applications: as an emul...view more Hostaphat® A 25 is an anionic wetting agent and emulsifier. This clear, yellowish liquid is composed of alkyl polyethylene glycol ether phosphoric acid mono / diester (50/50) ammonium salt. Hostaphat® A 25 is used in the following applications: as an emulsifier in emulsion polymerization, 2 - 5 % on monomers; and as a dispersing agent for pigments in aqueous dispersions, 30 – 100 % on pigments. view less | |
| Hostaphat® MDAH | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostaphat® MDAH is an anionic wetting and dispersing agent. This clear, yellowish liquid is composed of alkyl phosphoric acid mono / diester, acid form. It is used as wetting and dispersing agent for pigment dispersions and as a stabilizer for aqueous met...view more Hostaphat® MDAH is an anionic wetting and dispersing agent. This clear, yellowish liquid is composed of alkyl phosphoric acid mono / diester, acid form. It is used as wetting and dispersing agent for pigment dispersions and as a stabilizer for aqueous metallic pigment pastes. Hostaphat® MDAH increases the colour intensity in colour bases. For metal pigment pastes Hostaphat® prevents the coagulation of the metal pigments and protects the metal particles from corrosion. view less | |
| Hostaphat® OPS 100 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostaphat® OPS 100 is a solubilizer for the chemical-technological industry. This crystalline solid is composed of octane phosphoric acid. Hostaphat® OPS 100 is used for the following applications: as a solubilizier for liquid cleaning agents to improve t...view more Hostaphat® OPS 100 is a solubilizer for the chemical-technological industry. This crystalline solid is composed of octane phosphoric acid. Hostaphat® OPS 100 is used for the following applications: as a solubilizier for liquid cleaning agents to improve the compatibility of electrolytes, polymers and anionic or nonionic surfactants; as a dispersing agent for preparations of metal pigments such as Aluminium or Bronze; and as a dispersing agent for inorganic pigments and TiO2 in aqueous solution. view less | |
| Hostaphat® OPS 75 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostaphat® OPS 75 is a solubilizer for the chemical-technological industry. This light yellow liquid is composed of octane phosphonic acid. Hostaphat® OPS 75 is used for the following applications: as a solubilizier or hydrotrope for liquid cleaning agent...view more Hostaphat® OPS 75 is a solubilizer for the chemical-technological industry. This light yellow liquid is composed of octane phosphonic acid. Hostaphat® OPS 75 is used for the following applications: as a solubilizier or hydrotrope for liquid cleaning agents to improve the compatibility of electrolytes, polymers and anionic or nonionic surfactants; as a dispersing agent for preparations of metal pigments such as Aluminium or Bronze; and as a dispersing agent for inorganic pigments and TiO2 in aqueous solution. view less | |
| Hostapur® OS Liquid | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostapur® OS Liquid is an anionic surfactant for industrial applications. This yellowish liquid is compatible with nonionic and anionic surfactants, and it is readily biodegradable. Hostapur® OS liquid has strong wetting, cleaning and foaming characterist...view more Hostapur® OS Liquid is an anionic surfactant for industrial applications. This yellowish liquid is compatible with nonionic and anionic surfactants, and it is readily biodegradable. Hostapur® OS liquid has strong wetting, cleaning and foaming characteristics. The foam quality is excellent with high stability. It is used in the production of detergents and cleaning agents. It is particularly suitable for the use in foam cleaners for upholstery and carpets, because of the low stickiness of the residues left on the fiber. Hostapur® OS liquid is also used in the textile, leather and construction industry as a wetting agent, detergent and foaming agent. It is used as an emulsifier in emulsion polymerization of styrene / butadiene latex, styrene / butadiene rubber and acrylate and styrene / acrylate dispersions. view less | |
| Hostapur® OSB | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostapur® OSB is an anionic surfactant for industrial applications. This fine, slightly yellowish powder is readily biodegradable. Hostapur® OSB has a strong wetting and cleaning action and good foaming power. The foam quality is excellent, with high stab...view more Hostapur® OSB is an anionic surfactant for industrial applications. This fine, slightly yellowish powder is readily biodegradable. Hostapur® OSB has a strong wetting and cleaning action and good foaming power. The foam quality is excellent, with high stability. This product is used for the production of detergent and cleaning agent powders. Because of its low stickiness, Hostapur® OSB is particularly suitable for use in foam cleaners for upholstery and carpets. Hostapur® OSB is also used in the textile, leather and construction industries as a wetting agent, detergent and foaming agent. view less | |
| Hostapur® SAS 30 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostapur® SAS 30 is an anionic emulsifier for emulsion polymerization. This clear, slightly yellowish liquid is readily biodegradable. Hostapur® SAS 30 is used as an emulsifier for the production of emulsion polymers in the polymerization of E-PVC, and in...view more Hostapur® SAS 30 is an anionic emulsifier for emulsion polymerization. This clear, slightly yellowish liquid is readily biodegradable. Hostapur® SAS 30 is used as an emulsifier for the production of emulsion polymers in the polymerization of E-PVC, and in the polymerization of styrene/butadiene and acrylonitrile/butadiene rubber. This product is also a suitable emulsifier for the following polymer systems: in the polymerization of vinyl acetate and comonomers; in the polymerization of acrylates and styrene/acrylates; and in the polymerization of styrene/butadiene latex. view less | |
| Hostapur® SAS 60 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Hostapur® SAS 60 is an anionic emulsifier for emulsion polymerization. This yellowish paste is readily biodegradable. Hostapur® SAS 60 is used as an emulsifier in the production of the following emulsion polymers: in the polymerization of E-PVC; in the po...view more Hostapur® SAS 60 is an anionic emulsifier for emulsion polymerization. This yellowish paste is readily biodegradable. Hostapur® SAS 60 is used as an emulsifier in the production of the following emulsion polymers: in the polymerization of E-PVC; in the polymerization of styrene/butadiene and acrylonitrile/butadiene rubber. It is also a suitable emulsifier for the following polymer systems: in the polymerization of vinyl acetate and comonomers; in the polymerization of acrylates and styrene/acrylates; and in the polymerization of styrene/butadiene latex. view less | |
| JMAC Composite PG | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | JMAC Composite PG is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC Composite PG is a powder. JMAC Composite PG is effective...view more JMAC Composite PG is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC Composite PG is a powder. JMAC Composite PG is effective against bacteria, fungi and yeast. This product is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| JMAC LP 1 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | JMAC LP 1 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC LP 1 is a liquid product. This product is recommended for a wide ra...view more JMAC LP 1 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC LP 1 is a liquid product. This product is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| JMAC LP 10 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | JMAC LP 10 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC LP 10 is a liquid product. It is effective against bacteria, fungi...view more JMAC LP 10 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. JMAC LP 10 is a liquid product. It is effective against bacteria, fungi and yeast. JMAC LP 10 is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Monoethylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Monoethylene Glycol Dimethyl Ether is a clear, colorless liquid and volatile liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and most common solvents in any ratio. As a result of its ch...view more Monoethylene Glycol Dimethyl Ether is a clear, colorless liquid and volatile liquid. Because of the free electron pairs at the oxygen atoms it has high solvating power and is miscible with water and most common solvents in any ratio. As a result of its chemical stability and the absence of reactive groups, Monoethylene glycol dimethyl ether can be used as an inert reaction medium for many organic and organometallic reactions (e.g. Suzuki-coupling, Simmons-Smith-reactions, Grignard reactions) and for polymerizations. Because of its aprotic nature and low viscosity 1,2-Dimethyoxyethane is also used as electrolytic solvent for lithium batteries (in combination with other solvents). view less | |
| Nipacide BCP | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BCP is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BCP is recommended for formulating as an active agent in dis...view more Nipacide BCP is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BCP is recommended for formulating as an active agent in disinfectant formulations for use in hospital, household, Industrial and farming environments. view less | |
| Nipacide BIT | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BIT is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT is recommended for a wide range of applications includin...view more Nipacide BIT is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide BIT 10 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BIT 10 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT 10 is a glycol based solution product. Nipacide BIT 1...view more Nipacide BIT 10 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT 10 is a glycol based solution product. Nipacide BIT 10 is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide BIT 20 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BIT 20 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT 20 is a glycol based solution product. Nipacide BIT 2...view more Nipacide BIT 20 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT 20 is a glycol based solution product. Nipacide BIT 20 is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide BIT 20 DPG | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BIT 20 DPG is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT 20 DPG is a glycol based liquid. Nipacide BIT 20 ...view more Nipacide BIT 20 DPG is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT 20 DPG is a glycol based liquid. Nipacide BIT 20 DPG is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide BIT AS | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BIT AS is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. It is a water based free flowing dispersion. Nipacide BIT AS is re...view more Nipacide BIT AS is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. It is a water based free flowing dispersion. Nipacide BIT AS is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide BIT AS 20 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BIT AS 20 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT AS 20 is a water based free flowing dispersion. Th...view more Nipacide BIT AS 20 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BIT AS 20 is a water based free flowing dispersion. This product is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide BK | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BK is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. Nipa...view more Nipacide BK is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. Nipacide BK is a water based liquid. It is recommended for a wide range of applications including adhesives, cleaning Industrial systems, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide BKX | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BKX is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BKX is a water based liquid. This product is effective again...view more Nipacide BKX is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide BKX is a water based liquid. This product is effective against bacteria, fungi and yeast. It is recommended for a wide range of applications including adhesives, polymer emulsions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide BNPD | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide BNPD is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against algal and fungal spoilage in the wet state. Nipacide BNPD is a powder. It is recommended for a wide range of applica...view more Nipacide BNPD is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against algal and fungal spoilage in the wet state. Nipacide BNPD is a powder. It is recommended for a wide range of applications including adhesives, polymer emulsions, MWF, paint, cooling towers, storage tanks, humidifiers, scrubbers and filters where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide CBX | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CBX is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide CBX is a glycol based solution. It is recommended for a wide...view more Nipacide CBX is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide CBX is a glycol based solution. It is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide CDZ M | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CDZ M is a low toxicity biocide specifically developed for the complete microbiological protection of water based and solvent based products against fungal spoilage in the dry state. Nipacide CDZ M is a powder product. It is recommended for a wid...view more Nipacide CDZ M is a low toxicity biocide specifically developed for the complete microbiological protection of water based and solvent based products against fungal spoilage in the dry state. Nipacide CDZ M is a powder product. It is recommended for a wide range of applications including paints, plastics, adhesives and sealants where protection is required in the dry state. view less | |
| Nipacide CFB | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CFB is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide CFB is a water based liquid. Nipacide CFB is recommended for...view more Nipacide CFB is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide CFB is a water based liquid. Nipacide CFB is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide CFX 1 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CFX 1 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide CFX 1 is a glycol based solution. This yellow liquid is re...view more Nipacide CFX 1 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. Nipacide CFX 1 is a glycol based solution. This yellow liquid is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide CFX 2 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CFX 2 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. N...view more Nipacide CFX 2 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. Nipacide CFX 2 is a water based liquid. It is described chemically as a blend of chlorinated and non-chlorinated isothiazolinones plus ethyl glycol bis hemiformal. A unique stabilisation system has been developed and incorporated into Nipacide CFX/2. This product is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide CFX 3 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CFX 3 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. T...view more Nipacide CFX 3 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. This product is a water based liquid. It is described chemically as a blend of chlorinated and non-chlorinated isothiazolinones plus ethyl glycol bis hemiformal. A unique stabilisation system has been developed and incorporated into Nipacide CFX/3. Nipacide CFX 3 is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide CFX 4 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CFX 4 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. I...view more Nipacide CFX 4 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. It is a water based liquid. This product is described chemically as a blend of chlorinated and non-chlorinated isothiazolinones plus ethyl glycol bis hemiformal. A unique stabilisation system has been developed and incorporated into Nipacide CFX/4. This product is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide CI | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CI is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. This product is a water based liquid. Nipacide CI is recommended for a...view more Nipacide CI is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state. This product is a water based liquid. Nipacide CI is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less | |
| Nipacide CI 15 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide CI 15 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. I...view more Nipacide CI 15 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state, particularly where it is to be used at high ambient temperatures. It is a water based clear, yellow liquid. Nipacide CI 15 is recommended for a wide range of applications including adhesives, polymer emulsions, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state. view less |
