UL Prospector
Prospector
Company: Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品  Company: BYK 毕克  Clear All 

Success!

Successfully saved your search
821 Results
ANTI-TERRA®-203 BYK 毕克 ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging te...view more ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances. view less
ANTI-TERRA®-204 BYK 毕克 ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixot...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less
ANTI-TERRA®-205 BYK 毕克 ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides.
ANTI-TERRA®-250 BYK 毕克 ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the ...view more ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction. view less
ANTI-TERRA®-U BYK 毕克 ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of uns...view more ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of unsaturated polyamine amides and lower molecular weight acidic polyesters. view less
ANTI-TERRA®-U 100 BYK 毕克 ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERR...view more ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and inorganic. No adverse effect has been observed on the pot-life of two-component systems or on the dry time of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive in water soluble coatings. view less
Antimussol® 4752 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Antimussol® 4752 is a defoaming agent for aqueous formulations. It is an aqueous solution of fatty derivatives with a small polysiloxane component. This white dispersion is used in a wide range of foaming media including: emulsion paints; polymer dispersi...view more Antimussol® 4752 is a defoaming agent for aqueous formulations. It is an aqueous solution of fatty derivatives with a small polysiloxane component. This white dispersion is used in a wide range of foaming media including: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; concrete; works and waste water. view less
Antimussol® 4846N Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Antimussol® 4846N is a defoaming agent for aqueous formulations. It is a mixture of hydrocarbons and fatty acid ethoxylates. Antimussol® 4846N is a combined defoamer/de-aerator with wetting properties. It develops its full efficacy in the acid and alkalin...view more Antimussol® 4846N is a defoaming agent for aqueous formulations. It is a mixture of hydrocarbons and fatty acid ethoxylates. Antimussol® 4846N is a combined defoamer/de-aerator with wetting properties. It develops its full efficacy in the acid and alkaline region. As a product which is free from phosphoric acid esters there is no danger to attack on plastics/rubbers. This product can be pre-diluted with water to a white emulsion. It can also be added in a water spray which is sprayed onto the foaming medium (e.g. to defoam wastewater). When mixing into concentrates Antimussol® 4846N should be added undiluted and stirred until homogeneous. view less
Antimussol® TIP Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Antimussol® TIP is a general-purpose waste water defoamer. It is a mixture of phosphoric acid esters and isobutanol. The defoamer is supplied in ready-to-use form, and no further dilution is necessary. It can also be used as a defoamer for textile deterge...view more Antimussol® TIP is a general-purpose waste water defoamer. It is a mixture of phosphoric acid esters and isobutanol. The defoamer is supplied in ready-to-use form, and no further dilution is necessary. It can also be used as a defoamer for textile detergents. Antimussol® TIP destroys foam produced by the various classes of surfactant. The most effictive method of defoaming is to spray the product onto the foam. view less
Antimussol® TW Liquid Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Antimussol® TW Liquid is a defoaming agent for aqueous formulations. It is a mineral oil-free defoamer based on fatty derivatives. This white, aqueous dispersion is sprayed onto the surface of the foaming medium preferably at points with high liquor turbu...view more Antimussol® TW Liquid is a defoaming agent for aqueous formulations. It is a mineral oil-free defoamer based on fatty derivatives. This white, aqueous dispersion is sprayed onto the surface of the foaming medium preferably at points with high liquor turbulence, either undiluted or diluted up to 1:5 with water. It is suggested for the following applications: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; preferably acid detergent formulations; concrete; works and waste water; and metal processing agents. view less
Antimussol® V 5084 Liquid Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Antimussol® V 5084 Liquid is a defoaming agent for aqueous solutions. It is a mixture of ethoxylated and nitrogen containing components with silica. Antimussol® V 5084 liquid has a good resistance against salts, acids and alkalines. It has a good compatib...view more Antimussol® V 5084 Liquid is a defoaming agent for aqueous solutions. It is a mixture of ethoxylated and nitrogen containing components with silica. Antimussol® V 5084 liquid has a good resistance against salts, acids and alkalines. It has a good compatibility with anionic, nonionic and cationic auxiliaries. This product is suggested for the following applications: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; surfactant formulations; and concrete. view less
Antimussol® V 5348 Liquid Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Antimussol® V 5348 Liquid is a defoaming agent for aqueous solutions. It is a blend of liquid hydrocarbons with silica and fat derivatives. This product is a highly effective liquid defoamer with emulsifying abilities in water. Therefore this defoamer typ...view more Antimussol® V 5348 Liquid is a defoaming agent for aqueous solutions. It is a blend of liquid hydrocarbons with silica and fat derivatives. This product is a highly effective liquid defoamer with emulsifying abilities in water. Therefore this defoamer type is especially suitable for the use in low viscous and and unpigmented systems. Of course Antimussol® V 5348 liquid can also be used in highly filled systems especially when a fast distribution of the defoamer is desired. For manufacturing of emulsions it is necessary to add always the defoamer to the water. This product is typically used in the following applications: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; surfactant formulations; and concrete. view less
AQUACER 1013 BYK 毕克 AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes.
AQUACER 1031 BYK 毕克 AQUACER 1031 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous care products. It offers an anti-slip effect and good foot traffic resistance.
AQUACER 1039 BYK 毕克 AQUACER 1039 is a paraffin wax emulsion for improved surface characteristics in aqueous coatings and printing inks.
AQUACER 1040 BYK 毕克 AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting.
AQUACER 1061 BYK 毕克 AQUACER 1061 is an emulsion of an ethylene-acrylic acid copolymer wax for improving the surface characteristics of paper.
AQUACER 1063 BYK 毕克 AQUACER 1063 is a polyethylene dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector.
AQUACER 1075 BYK 毕克 AQUACER 1075 is an emulsion based on an HD polyethylene wax to improve the surface properties of aqueous care products and polishes, and aqueous printing inks.
AQUACER 1510 BYK 毕克 AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds.
AQUACER® 1547 BYK 毕克 AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance.
AQUACER 2500 BYK 毕克 AQUACER 2500 is a wax emulsion on the basis of modified PE for aqueous foil and paper coatings to improve slip and abrasion resistance.
AQUACER 2650 BYK 毕克 AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the s...view more AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less
AQUACER 3500 BYK 毕克 AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting.
AQUACER 494 BYK 毕克 AQUACER 494 is an aqueous paraffin wax emulsion for care products and polishes.
AQUACER 497 BYK 毕克 AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip.
AQUACER 501 BYK 毕克 AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection.
AQUACER 506 BYK 毕克 AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 506 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 506 is compatible with all known polymer dispersions and plasticizers. view less
AQUACER® 507 BYK 毕克 AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...view more AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). view less
AQUACER® 513 BYK 毕克 AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less
AQUACER 519 BYK 毕克 AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 519 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 519 is compatible with all known polymer dispersions and plasticizers. view less
AQUACER® 526 BYK 毕克 AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves ...view more AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves orientation of effect pigments (aluminum, mica, etc.), reduces short wave defects (mottling, Bénard cells), and there is no negative influence on chemical resistance. view less
AQUACER 527 BYK 毕克 AQUACER 527 is a wax emulsion based on a modified EVA copolymer wax to improve surface characteristics in aqueous coating systems and printing inks.
AQUACER 528 BYK 毕克 AQUACER 528 is an emulsion based on an ethylene-acrylic acid-copolymer wax for improving the surface properties of aqueous care products. It offers strong anti-slip effect and good foot traffic resistance.
AQUACER 530 BYK 毕克 AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks.
AQUACER® 531 BYK 毕克 AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less
AQUACER 532 BYK 毕克 AQUACER 532 is an emulsion of a modified HD polyethylene wax for improved surface characteristics in aqueous coating systems.
AQUACER® 533 BYK 毕克 AQUACER® 533 is a wax emulsion on the basis of modified paraffin for aqueous systems to improve surface slip, anti-blocking, and water-resistance. It is typically used in architectural coatings and in the printing inks industry.
AQUACER® 537 BYK 毕克 AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking...view more AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking and slip. view less
AQUACER® 539 BYK 毕克 AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...view more AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. view less
AQUACER 541 BYK 毕克 AQUACER 541 is an aqueous emulsion of a montan ester wax for care products and polishes as well as for aqueous coating systems and leather coatings.
AQUACER® 552 BYK 毕克 AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems.
AQUACER 561 BYK 毕克 AQUACER 561 is a beeswax-based wax emulsion to improve surface protection in aqueous care products and coating systems.
AQUACER 565 BYK 毕克 AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the ...view more AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less
AQUACER 570 BYK 毕克 AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...view more AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. view less
AQUACER 571 BYK 毕克 AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems.
AQUACER 581 BYK 毕克 AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts.
AQUACER 582 BYK 毕克 AQUACER 582 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous seed coatings.
AQUACER 583 BYK 毕克 AQUACER 583 is a wax emulsion used to improve the surface characteristics of seed coatings.
AQUACER® 593 BYK 毕克 AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...view more AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. view less
AQUACER 595 BYK 毕克 AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack...view more AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack effect. view less
AQUACER 597 BYK 毕克 AQUACER 597 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting.
AQUACER® 840 BYK 毕克 AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, impro...view more AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, improves orientation of effect pigments and reduces short wave defects. view less
AQUAMAT® 208 BYK 毕克 AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scrat...view more AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance and soft feel effect. view less
AQUAMAT® 263 BYK 毕克 AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less
AQUATIX® 8421 BYK 毕克 AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: impr...view more AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: improves effect pigment orientation, reduces cloudiness /mottling, shows less sensivity to co-solvents in coating systems compared to PU based thickeners, is “ready to use”, provides easy handling and incorporation compared to clays or acrylic thickeners, and excellent anti-settling properties in coatings during storage and application. view less
Arkopal® N 040 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 040 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 4 Mol EO. This viscous, slightly yellow liquid is most suitable for mineral oils, petroleum and similar aliphatic hydrocarbons.
Arkopal® N 060 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 060 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 6 Mol EO. This viscous, slightly yellow liquid is most suitable for mineral oils, petroleum and similar aliphatic hydrocarbons.
Arkopal® N 080 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 080 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 8 Mol EO. This viscous, slightly yellow liquid is most suitable for aromatic hydrocarbons.
Arkopal® N 090 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 090 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 9 Mol EO. This viscous, slightly yellow liquid is most suitable for aromatic hydrocarbons.
Arkopal® N 100 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 100 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 10 Mol EO. This viscous, slightly yellow liquid is most suitable for aromatic hydrocarbons.
Arkopal® N 1000 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 1000 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 100 Mol EO. This white up to slightly yellow wax is used as an emulsifier and dispersing agent, and as an emuslifer for bitumen.
Arkopal® N 110 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 110 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 11 Mol EO. This viscous, slightly yellow liquid is most suitable for chlorinated hydrocarbons.
Arkopal® N 130 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 130 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 13 Mol EO. This slightly yellow, pourable paste is most suitable for aromatic hydrocarbons.
Arkopal® N 150 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 150 is a nonionic surfactant for the chemical industry. It is a nonylphenolpolyglycolether with 15 Mol EO. This slightly yellow paste is most suitable for chlorinated hydrocarbons.
Arkopal® N 230 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 230 is a nonionic surfactant for the chemical industry. It is composed of Nonylphenolpolyglycolether with 23 Mol EO. Being nonionic, the Arkopal N grades are compatible with all other nonionic, anionic or cationic substances. Electrolytes, for ...view more Arkopal® N 230 is a nonionic surfactant for the chemical industry. It is composed of Nonylphenolpolyglycolether with 23 Mol EO. Being nonionic, the Arkopal N grades are compatible with all other nonionic, anionic or cationic substances. Electrolytes, for example neutral salts, alkalis and – to a lesser extent – acids, reduce the water solubility of the Arkopal N grades and may lead to their salting out, especially at high concentrations and temperatures. This slightly yellow wax is most suitable for fatty acids (olein) and waxes. view less
Arkopal® N 238 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 238 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 23 mole ethylene oxide. Arkopal® N 230 is used in the following applications:as emulsifier in emulsion polymerization; as wax e...view more Arkopal® N 238 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 23 mole ethylene oxide. Arkopal® N 230 is used in the following applications:as emulsifier in emulsion polymerization; as wax emulsifier; for pigment pastes; as stabilizer in paints and coatings. view less
Arkopal® N 300 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 300 is a nonionic surfactant for the chemical industry. It is composed of nonylphenolpolyglycolether with 30 Mol EO. The Arkopal® N grades have excellent resistance to compounds that cause hard water, to metal salts, including those of heavy me...view more Arkopal® N 300 is a nonionic surfactant for the chemical industry. It is composed of nonylphenolpolyglycolether with 30 Mol EO. The Arkopal® N grades have excellent resistance to compounds that cause hard water, to metal salts, including those of heavy metals, acids, alkalis, reductive agents and oxidative agents based on peroxide. This slightly yellow wax is most suitable for fatty acids (olein) and waxes. view less
Arkopal® N 307 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 307 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 30 mole ethylene oxide. This product is used in the following applications: as emulsifier in emulsion polymerization; as wax em...view more Arkopal® N 307 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 30 mole ethylene oxide. This product is used in the following applications: as emulsifier in emulsion polymerization; as wax emulsifier; for pigment pastes; and as stabilizer in paints and coatings. view less
Arkopal® N 308 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopal® N 308 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 30 moleethylene oxide. Arkopal® N 308 is used in the following applications:as emulsifier in emulsion polymerization; as wax em...view more Arkopal® N 308 is a nonionic emulsifier for the chemical industry. It is composed of nonylphenol polyethylene glycol ether with 30 moleethylene oxide. Arkopal® N 308 is used in the following applications:as emulsifier in emulsion polymerization; as wax emulsifier; for pigment pastes; as stabilizer in paints and coatings. view less
Arkopon® T Paste 8015 Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 Arkopon® T Paste 8015 is an anionic emulsifier, wetting and dispersing agent for coating applications. This yellow paste is composed of sodium alkyl methyl tauride. Arkopon® T Paste 8015 is used in pigment preparations for inorganic pigments e.g. for tita...view more Arkopon® T Paste 8015 is an anionic emulsifier, wetting and dispersing agent for coating applications. This yellow paste is composed of sodium alkyl methyl tauride. Arkopon® T Paste 8015 is used in pigment preparations for inorganic pigments e.g. for titanium dioxide. It offers high pigment loads, low viscosity and high tinting strengths. Arkopon® T Paste 8015 improves the compatibility of inorganic and organic pigments in solvent-borne coatings, e.g. long-oil alkyd paints in the presence of aqueous pigment preparations. Arkopon® T Paste 8015 prevents the flocculation of titanium dioxide and the agglomeration of organic pigments. This product is also used for anionic bitumen emulsions. view less
BENTOLITE-L 10 BYK 毕克 BENTOLITE-L 10 is a low iron rheology additive based on natural bentonite for aqueous plastic refractories.
BENTOLITE-L 3 BYK 毕克 BENTOLITE-L 3 is a low iron rheology additive based on natural bentonite for aqueous plastic refractories.
BYK-011 BYK 毕克 BYK-011 is a silicone-free, polymer-based defoamer for aqueous coating systems (also radiation curable systems). It is particularly recommended for two pack polyurethane systems and offers very good recoatability.
BYK®-012 BYK 毕克 BYK®-012 is a compound of foam-destroying polymers and hydrophobic particles. This product is especially suitable for defoaming emulsion paints and plasters with a PVC-range of 30-85, where it prevents foam during production and application. The product i...view more BYK®-012 is a compound of foam-destroying polymers and hydrophobic particles. This product is especially suitable for defoaming emulsion paints and plasters with a PVC-range of 30-85, where it prevents foam during production and application. The product is silicone- and mineral oil-free and is specifically recommended for VOC-free systems. The additive shows optimum efficiency at low dosage, is acid and alkaline resistant and can be used in a pH-range of 3 - 12. The product may lead to turbidity and seeding in clear coats. view less
BYK®-014 BYK 毕克 BYK®-014 is a mixture of foam-destroying polymers, fat derivatives and hydrophobic particles. This product shows excellent defoaming properties in various emulsion types such as acrylates, styrene acrylics or VAE´s (vinyl acetate ethylene). It is especial...view more BYK®-014 is a mixture of foam-destroying polymers, fat derivatives and hydrophobic particles. This product shows excellent defoaming properties in various emulsion types such as acrylates, styrene acrylics or VAE´s (vinyl acetate ethylene). It is especially suitable for defoaming emulsion paints and plasters with a PVC range of 30-85. The product is silicone-free and mineral oil-free and is specifically recommended for VOC-free systems. The additive shows optimum efficiency at low dosage, is acid and alkaline resistant, and can be used in a pH range of 3 - 12. view less
BYK-015 BYK 毕克 BYK-015 is a silicone-free, polymer-based defoamer with anti-popping properties for aqueous coatings. Particularly recommended for automotive and industrial coatings.
BYK®-016 BYK 毕克 BYK®-016 is a compound of foam-destroying polymers and hydrophobic particles. It is a very effective silicone- and mineral oil free defoamer. It has no negative influence on the printing behavior and does not cause defects in the typography. At the time o...view more BYK®-016 is a compound of foam-destroying polymers and hydrophobic particles. It is a very effective silicone- and mineral oil free defoamer. It has no negative influence on the printing behavior and does not cause defects in the typography. At the time of publication the active compound in BYK-016 fully meets all requirements of the European Union for "materials and articles in contact with foodstuffs“, and complies with FDA 21 CFR § 175.105, 175.300, 175.320, 176.200, 176.210. view less
BYK®-017 BYK 毕克 BYK®-017 is a compound of foam destroying polysiloxanes and hydrophobic solids. It is especially suited for defoaming millbases during dispersion and subsequent processing. The product is an excellent defoamer for glycol pastes and aqueous pigment concent...view more BYK®-017 is a compound of foam destroying polysiloxanes and hydrophobic solids. It is especially suited for defoaming millbases during dispersion and subsequent processing. The product is an excellent defoamer for glycol pastes and aqueous pigment concentrates. It exhibits excellent defoaming during grinding and excellent storage stability. This results in improved grinding and handling of the final pigment concentrates and coatings. view less
BYK®-018 BYK 毕克 BYK®-018 is a mixture of hydrophobic solids and foam destroying polysiloxanes. It is especially suitable for pigmented emulsion systems based on styrene/ acrylate, acrylate or acrylate/polyurethane combinations with a low PVC. In industrial emulsion paint...view more BYK®-018 is a mixture of hydrophobic solids and foam destroying polysiloxanes. It is especially suitable for pigmented emulsion systems based on styrene/ acrylate, acrylate or acrylate/polyurethane combinations with a low PVC. In industrial emulsion paints that are applied by dipping, flow coating, and airless spraying BYK-018 is very efficient against microfoam. view less
BYK®-019 BYK 毕克 BYK®-019 is a solution of a polyether modified polydimethylsiloxane. BYK-019 is recommended for aqueous coatings based on polyurethane dispersions and polyurethane /acrylic combinations. It is also effective for defoaming pigment concentrate formulations....view more BYK®-019 is a solution of a polyether modified polydimethylsiloxane. BYK-019 is recommended for aqueous coatings based on polyurethane dispersions and polyurethane /acrylic combinations. It is also effective for defoaming pigment concentrate formulations. To reduce microfoam, a combination of BYK-019 with BYK-024 in a ratio of 3:2 has been shown to give excellent results. view less
BYK®-021 BYK 毕克 BYK®-021 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. It is particularly useful for pigmented emulsions based on styrene/acrylics, acrylics or acrylic/polyurethanes with PVC‘s of 18-25%. This defoamer has demonstrate...view more BYK®-021 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. It is particularly useful for pigmented emulsions based on styrene/acrylics, acrylics or acrylic/polyurethanes with PVC‘s of 18-25%. This defoamer has demonstrated high activity against microfoam in high gloss and semi-gloss aqueous coatings, specifically in airless and air-assisted spray applied coatings. view less
BYK®-022 BYK 毕克 BYK®-022 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. It is especially suited for pigmented emulsion systems based on styrene/acrylics, acrylics or acrylic/polyurethanes with PVC‘s of 18-25%. It can also be used in a...view more BYK®-022 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. It is especially suited for pigmented emulsion systems based on styrene/acrylics, acrylics or acrylic/polyurethanes with PVC‘s of 18-25%. It can also be used in amine-neutralized systems and is very efficient against microfoam. view less
BYK®-023 BYK 毕克 BYK®-023 is an emulsion of foam destroying polysiloxanes, hydrophobic solids and emulsifiers. This product is preferably used in pigmented emulsion paints with PVC‘s of 30-50% based on styrene/acrylics, acrylic or terpolymer binders. It also can be used i...view more BYK®-023 is an emulsion of foam destroying polysiloxanes, hydrophobic solids and emulsifiers. This product is preferably used in pigmented emulsion paints with PVC‘s of 30-50% based on styrene/acrylics, acrylic or terpolymer binders. It also can be used in hybrid systems. view less
BYK®-024 BYK 毕克 BYK®-024 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product is suited for emulsion systems with PVC‘s from 0 to 25% based on polyurethane and acrylic/polyurethane. It is especially useful in rolling, brushing ...view more BYK®-024 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product is suited for emulsion systems with PVC‘s from 0 to 25% based on polyurethane and acrylic/polyurethane. It is especially useful in rolling, brushing or spraying applications. view less
BYK®-025 BYK 毕克 BYK®-025 is a solution of foam destroying polysiloxanes. It is highly recommended for non-pigmented polyurethane and acrylic/ polyurethane emulsion systems. This defoamer is very easily incorporated and allows optimizing dosage by post-addition while the ...view more BYK®-025 is a solution of foam destroying polysiloxanes. It is highly recommended for non-pigmented polyurethane and acrylic/ polyurethane emulsion systems. This defoamer is very easily incorporated and allows optimizing dosage by post-addition while the paint is running on a curtain coater. view less
BYK®-028 BYK 毕克 BYK®-028 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product is the standard defoamer for water-based systems and the basis (starting selection) for the testing of a defoamer series. BYK-028 is suitable for dis...view more BYK®-028 is a mixture of foam destroying polysiloxanes and hydrophobic solids in polyglycol. This product is the standard defoamer for water-based systems and the basis (starting selection) for the testing of a defoamer series. BYK-028 is suitable for dispersion paints with a PVC from 0 to 25 based on acrylate/polyurethane or polyurethane. BYK-028 is easy to incorporate. view less
BYK®-035 BYK 毕克 BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces.
BYK®-037 BYK 毕克 BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient.
BYK®-038 BYK 毕克 BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...view more BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. view less
BYK-039 BYK 毕克 BYK-039 is a mineral oil-based, VOC- and silicone-free defoamer for aqueous emulsion systems within a PVC range of 35-70. Does not contain alkylphenol ethoxylates. Also suitable for high-solid PUR leather coatings.
BYK®-044 BYK 毕克 BYK®-044 is an emulsion of hydrophobic particles and polysiloxanes. It is especially suitable for defoaming of the millbase during dispersion and further processing. The product defoams excellently glycol pastes and aqueous pigment concentrates. For defoa...view more BYK®-044 is an emulsion of hydrophobic particles and polysiloxanes. It is especially suitable for defoaming of the millbase during dispersion and further processing. The product defoams excellently glycol pastes and aqueous pigment concentrates. For defoaming of emulsion paints and dispersions lacquers BYK-044 is preferably used in pure acrylic and styrene acrylic emulsions. view less
BYK®-054 BYK 毕克 BYK®-054 is especially suited for solvent-free systems like PUR and epoxy floorings. It eliminates air-bubbles and ensures pinhole-free surfaces. Due to its strong incompatibility, the additive‘s influence on the transparency of clear systems must be eval...view more BYK®-054 is especially suited for solvent-free systems like PUR and epoxy floorings. It eliminates air-bubbles and ensures pinhole-free surfaces. Due to its strong incompatibility, the additive‘s influence on the transparency of clear systems must be evaluated. BYK-054 is also suitable to defoam plastisols. view less
BYK®-055 BYK 毕克 BYK®-055 is a solution of foam destroying polymers that is silicone free. This product is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters wit...view more BYK®-055 is a solution of foam destroying polymers that is silicone free. This product is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters, curtain stability is provided. Used in non-pigmented wood coatings, a slight turbidity over dark wood could occur. Good results can also be achieved in epoxies. view less
BYK®-057 BYK 毕克 BYK®-057 is a solution of foam destroying polymers, silicone free. It is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters...view more BYK®-057 is a solution of foam destroying polymers, silicone free. It is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters, curtain stability is provided. Used in non-pigmented wood coatings, a slight turbidity over dark wood could occur. Good results can also be achieved in epoxies. view less
BYK®-070 BYK 毕克 BYK®-070 is a solution of foam destroying polymers and polysiloxanes. This product was developed for medium to high polar systems and is successfully used in the following resins: thermoplastic acrylics, chlorinated rubber, polyurethane, alkyd/urea, alkyd...view more BYK®-070 is a solution of foam destroying polymers and polysiloxanes. This product was developed for medium to high polar systems and is successfully used in the following resins: thermoplastic acrylics, chlorinated rubber, polyurethane, alkyd/urea, alkyd/melamine, and acrylic/melamine. Suggested application fields include machinery paints, radiator paints, industrial coatings, automotive systems and wood lacquers. view less
BYK®-072 BYK 毕克 BYK®-072 is a solution of foam destroying polysiloxanes. This product displays excellent defoaming activity in all solvent-borne systems. The active substance complies with FDA § 175.300 and is suitable for use in can coatings. This defoamer is very easy ...view more BYK®-072 is a solution of foam destroying polysiloxanes. This product displays excellent defoaming activity in all solvent-borne systems. The active substance complies with FDA § 175.300 and is suitable for use in can coatings. This defoamer is very easy to incorporate, allowing optimal dosage by post-addition. view less
BYK®-077 BYK 毕克 BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when reco...view more BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when recoated. view less
BYK®-081 BYK 毕克 BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly...view more BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly suitable for high solid alkyd systems in the architectural coatings sector. The additive shows good compatibility with clear coatings. BYK®-081 is not suitable for aqueous systems that contain little or no organic solvent as co-solvent. view less
BYK®-085 BYK 毕克 BYK®-085 is a polymethylalkylsiloxane. This product is the solvent-free version of BYK-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists.