| Anti-blocking agent SR | Suny Chem 烟台信谊化工有限公司 | Anti-blocking agent SR is a neutral white waxy solid, which is produced through short-range molecular distillation and purification. It can be miscible with paraffin, dissolved in ethanol, chloroform, ether but not in water. | |
| BYK®-394 | BYK 毕克 | BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint su...view more BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint surface and crosslinks into the polymer network due to its reactivity and is therefore fixed at the paint surface. BYK-394 reacts by primary OH-groups with binders and is used in solvent-borne systems. The additive reacts with the following binders: 2-pack Polyurethane, Alkyd-Melamine, Polyester-Melamine, Acrylic-Melamine, AcrylicEpoxy combinations. This additive improves leveling and gloss. It produces a long wave effect and prevents cratering without influence on surface tension (silicone-free). BYK-394 is thermally stable. view less | |
| BYK®-P 9051 | BYK 毕克 | BYK®-P 9051 is a processing additive for BMC with mold release properties. It is a combination of surface active substances and polymers. It is an additive to facilitate processing of BMC/DMC. It also imparts mold release properties. The product does not ...view more BYK®-P 9051 is a processing additive for BMC with mold release properties. It is a combination of surface active substances and polymers. It is an additive to facilitate processing of BMC/DMC. It also imparts mold release properties. The product does not contribute to fogging. In BMC for headlamp reflectors it minimizes fogging of the molded parts. Due to its lower viscosity the additive is easier to process than BYK-P 9050. view less | |
| BYK-SILCLEAN 3701 | BYK 毕克 | BYK-SILCLEAN 3701 is a silicone-containing surface additive for epoxy resin systems to improve cleanability (easy-to-clean effect). Permanent effect as a result of cross-linking in the system. | |
| Dynoadd® R-1001 | Dynoadd by Dynea 太尔化工 | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...view more Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. view less | Request Sample |
| Fluoro P-77 (FEP Powder) | Shamrock Technologies, Inc. 三叶科技 | Fluoro P-77 is a FEP powder used in applications where release properties are required. Fluoro P77 offers high gloss and smoothness when fused. | |
| Genamin® CC 500 E | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Genamin® CC 500 E is a cationic emulsifier for the chemical-technological industry. This light brown paste is composed of coconut fatty amine oleate. It is used as a demolding agent for the building industry. After storage of some months the color of the ...view more Genamin® CC 500 E is a cationic emulsifier for the chemical-technological industry. This light brown paste is composed of coconut fatty amine oleate. It is used as a demolding agent for the building industry. After storage of some months the color of the product may become darker. view less | |
| Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 145 is an amide wax in a non-ionic aqueous dispersion. Hydrocer 145 is recommended for use in the water-based coating systems. | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...view more NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. view less | |
| OMBRELUB RA | Munzing Chemie | OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastif...view more OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers. Main applications include strippable coatings, transport protection coatings, hobby paints, and coatings for spray booths. view less | |
| S-400-N1 (EBS Wax Powder) | Shamrock Technologies, Inc. 三叶科技 | S-400 N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is recommended for powder, water-based, solvent-based, and UV systems. | |
| S-400-N5 (EBS Wax Powder) | Shamrock Technologies, Inc. 三叶科技 | S-400 N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax Powder) | Shamrock Technologies, Inc. 三叶科技 | S-400 SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, leather, water-based, solvent-based and UV systems. | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...view more SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. view less | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...view more SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. view less | |
| TEGO® Cure 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener. | Request Sample |
| TEGO® Rad 2650 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnish...view more TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnishes, silk screen inks, and (litho) offset printing inks. It improves scratch and marker resistance with additional slip and deaerating activity. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2650. view less | Request Sample |
| TEGO® Rad 2700 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by...view more TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by stirring. The application properties of the product are not affected by the seperation. Addition of the product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2700. view less | Request Sample |
| TEGO® Rad 2800 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has ...view more TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has a pronounced silicone character, combining strong hydrophobing properties with optimum system compatibility. view less | Request Sample |
