| 941 LBA | PCI Group, Inc. | 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float. | |
| ADDITOL® XL 123 N | Allnex | Additol® XL 123 N is a flow agent and defoamer based on a modified silicone oil, for air drying and stoving coatings systems. | Request Sample |
| ADDITOL® XW 6580 | Allnex | ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam...view more ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam stabilization. view less | Request Sample |
| AFCONA - 3030 | AFCONA Additives Sdn Bhd | AFCONA – 3030 is an organically modified polyether siloxane. This clear to slightly yellow liquid functions as a moderate slip, leveling, and anti-crater additive for solvent and water-based systems. AFCONA – 3030 finds application in solvent-based coatin...view more AFCONA – 3030 is an organically modified polyether siloxane. This clear to slightly yellow liquid functions as a moderate slip, leveling, and anti-crater additive for solvent and water-based systems. AFCONA – 3030 finds application in solvent-based coatings and water-based coatings. view less | |
| AFCONA - 3031 | AFCONA Additives Sdn Bhd | AFCONA – 3031 is an organically modified polyether siloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for metal and ultraviolet coatings and visually enhances film thickness. AFCONA – 3031 finds application in solvent...view more AFCONA – 3031 is an organically modified polyether siloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for metal and ultraviolet coatings and visually enhances film thickness. AFCONA – 3031 finds application in solvent- and water-based coatings, industrial baking systems, and car refinish polyurethane top clear coats. view less | |
| AFCONA - 3033 | AFCONA Additives Sdn Bhd | AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds applica...view more AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds application in wood and clear coatings, thermoplastic resins, NC, acid curing, polyurethanes, and in printing inks. view less | |
| AFCONA - 3034 | AFCONA Additives Sdn Bhd | AFCONA – 3034 is a fluorocarbon containing organically modified polysiloxane. This clear to slightly yellow liquid is an additive designed to reduce surface tension, and to improve substrate wetting, anti-crater, and levelling performance. AFCONA – 3034 f...view more AFCONA – 3034 is a fluorocarbon containing organically modified polysiloxane. This clear to slightly yellow liquid is an additive designed to reduce surface tension, and to improve substrate wetting, anti-crater, and levelling performance. AFCONA – 3034 finds application in most paint systems, water- and solvent-based industrial coatings, plastic coatings, and industrial baking systems. view less | |
| AFCONA - 3035 | AFCONA Additives Sdn Bhd | AFCONA – 3035 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid is compatible with high polar systems and functions as a leveling additive for the prevention of surface defects in UPE and epoxy systems. AFCONA – 3035 ...view more AFCONA – 3035 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid is compatible with high polar systems and functions as a leveling additive for the prevention of surface defects in UPE and epoxy systems. AFCONA – 3035 finds application in water- and solvent-based coatings. view less | |
| AFCONA - 3037 | AFCONA Additives Sdn Bhd | AFCONA – 3037 is a blend of high-boiling aromatic ketone and ester solvents and a compatible polysiloxane. This clear liquid functions as an anti-blushing and leveling agent for thermoplastic systems, an anti- solvent popping agent for all baking paints, ...view more AFCONA – 3037 is a blend of high-boiling aromatic ketone and ester solvents and a compatible polysiloxane. This clear liquid functions as an anti-blushing and leveling agent for thermoplastic systems, an anti- solvent popping agent for all baking paints, and as flow agent for solvent-based paints. AFCONA – 3037 finds application in solvent-based systems and paints. view less | |
| AFCONA - 3038 | AFCONA Additives Sdn Bhd | AFCONA – 3038 is a silicone-free blend of high-boiling aromatic ketone and ester solvent. This clear liquid functions as an anti-blushing and leveling agent for thermoplastic systems, an anti- solvent popping agent for all baking paints, and as flow agent...view more AFCONA – 3038 is a silicone-free blend of high-boiling aromatic ketone and ester solvent. This clear liquid functions as an anti-blushing and leveling agent for thermoplastic systems, an anti- solvent popping agent for all baking paints, and as flow agent for solvent-based paints. AFCONA – 3038 finds application in solvent-based systems and paints. view less | |
| AFCONA - 3085 | AFCONA Additives Sdn Bhd | AFCONA – 3085 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive that cross-links in polyurethane systems and baking paints. AFCONA – 3085 finds application in solvent-based co...view more AFCONA – 3085 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive that cross-links in polyurethane systems and baking paints. AFCONA – 3085 finds application in solvent-based coatings, including wood coatings. view less | |
| AFCONA - 3230 | AFCONA Additives Sdn Bhd | AFCONA – 3230 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization. AFCONA – 3230 finds application in polyurethane wood coating systems, polyurethane top coats in p...view more AFCONA – 3230 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization. AFCONA – 3230 finds application in polyurethane wood coating systems, polyurethane top coats in plastic coatings application, and refinish topcoats based on polyurethane. view less | |
| AFCONA - 3231 | AFCONA Additives Sdn Bhd | AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds appl...view more AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds application in metal coatings such as industrial baking systems, car refinish polyurethane top clear coats, and in printing inks. view less | |
| AFCONA - 3232 | AFCONA Additives Sdn Bhd | AFCONA – 3232 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive in solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3232 finds applicat...view more AFCONA – 3232 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive in solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3232 finds application in wood coatings based on NC, acid curing, and polyurethane, and in thermoplastic resins. view less | |
| AFCONA - 3233 | AFCONA Additives Sdn Bhd | AFCONA – 3233 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a moderate, dry-type slip, leveling, and anti-cratering additive in water-based coatings. AFCONA – 3233 finds application in air-drying alky...view more AFCONA – 3233 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a moderate, dry-type slip, leveling, and anti-cratering additive in water-based coatings. AFCONA – 3233 finds application in air-drying alkyd systems, polyurethane systems, and industrial baking systems. view less | |
| AFCONA - 3236 | AFCONA Additives Sdn Bhd | AFCONA – 3236 is an organically modified polyalkyl polysiloxane. This clear to slightly yellow liquid functions as a slip, leveling, and anti-foam agent in solventless epoxies, high solid or solventless polyurethanes, paints applied by curtain coater, pai...view more AFCONA – 3236 is an organically modified polyalkyl polysiloxane. This clear to slightly yellow liquid functions as a slip, leveling, and anti-foam agent in solventless epoxies, high solid or solventless polyurethanes, paints applied by curtain coater, paints applied by airless spray application, and ultraviolet curing systems. AFCONA – 3236 finds application in baking paints such as coil coatings, and wood coatings. view less | |
| AFCONA - 3238 | AFCONA Additives Sdn Bhd | AFCONA – 3238 is an organically modified polyalkyl polysiloxane. This clear to slightly yellow liquid is compatible and functions as a slip, leveling, and anti-foam agent in solventless epoxies, high solid or solventless polyurethanes, paints applied by c...view more AFCONA – 3238 is an organically modified polyalkyl polysiloxane. This clear to slightly yellow liquid is compatible and functions as a slip, leveling, and anti-foam agent in solventless epoxies, high solid or solventless polyurethanes, paints applied by curtain coater, paints applied by airless spray application, and ultraviolet curing systems. AFCONA – 3238 finds application in matted finish coatings. view less | |
| AFCONA - 3239 | AFCONA Additives Sdn Bhd | AFCONA – 3239 is an organically modified polyalkyl polysiloxane. This clear to slightly yellow liquid is compatible and functions as a slip, leveling, and anti-foam agent in solventless epoxies, high solid or solventless polyurethanes, paints applied by c...view more AFCONA – 3239 is an organically modified polyalkyl polysiloxane. This clear to slightly yellow liquid is compatible and functions as a slip, leveling, and anti-foam agent in solventless epoxies, high solid or solventless polyurethanes, paints applied by curtain coater, paints applied by airless spray application, and ultraviolet curing systems. AFCONA – 3239 provides in-can haziness in polar systems such as polyurethanes and epoxies, finds application in matted finish coatings. view less | |
| AFCONA - 3250 | AFCONA Additives Sdn Bhd | AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam sta...view more AFCONA – 3250 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3250 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, ultraviolet coatings, and printing inks. view less | |
| AFCONA - 3251 | AFCONA Additives Sdn Bhd | AFCONA – 3251 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, improves leveling performance, has transparency, and can be used in all solvent-based systems whe...view more AFCONA – 3251 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization, improves leveling performance, has transparency, and can be used in all solvent-based systems where slip is desired and foam stabilization is not. AFCONA – 3251 finds application in wood coating systems including NC, acid curing, polyurethane and ultraviolet, top coats in plastic coatings application, refinish topcoats based on polyurethane, and ultraviolet coatings. view less | |
| AFCONA - 3280 | AFCONA Additives Sdn Bhd | AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration ...view more AFCONA – 3280 is a special organically modified polysiloxane. This clear to slightly yellow liquid is soluble in aliphatic and aromatic hydrocarbons, esters, and ketones, and insoluble in water. It functions as a moderate slip, anti-foam, and de-aeration additive with an anti-floating effect, while improving surface leveling and smoothness without causing intercoat adhesion. AFCONA – 3280 provides hot water resistance, and finds application in stoving enamels based on alkyd- , acrylic-, or polyester resins, in acid curing and polyurethane wood coatings, in self-leveling epoxy flooring compounds, and in ultraviolet-curing inks and coatings. view less | |
| AFCONA - 3285 | AFCONA Additives Sdn Bhd | AFCONA – 3285 is an organically modified polyether polysiloxane. This hazy to slightly yellow liquid functions as a permanent slip, leveling, and anti-foam agent that cross-links in polyurethane systems and baking paints. AFCONA – 3285 is compatible and f...view more AFCONA – 3285 is an organically modified polyether polysiloxane. This hazy to slightly yellow liquid functions as a permanent slip, leveling, and anti-foam agent that cross-links in polyurethane systems and baking paints. AFCONA – 3285 is compatible and finds application in solvent-based coatings, including wood coatings. view less | |
| AFCONA - 3522 | AFCONA Additives Sdn Bhd | AFCONA – 3522 is an organically modified polysiloxane and water emulsion. This milky white liquid improves the water resistance and slip and surface smoothness while providing anti-crater and substrate wetting properties, leveling, and low foam stabilizat...view more AFCONA – 3522 is an organically modified polysiloxane and water emulsion. This milky white liquid improves the water resistance and slip and surface smoothness while providing anti-crater and substrate wetting properties, leveling, and low foam stabilization in water. AFCONA – 3522 finds application in water-based coatings. view less | |
| AFCONA - 3580 | AFCONA Additives Sdn Bhd | AFCONA – 3580 is an organically modified polysiloxane. This clear to slightly yellow liquid functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low ...view more AFCONA – 3580 is an organically modified polysiloxane. This clear to slightly yellow liquid functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low foam stabilization in water. AFCONA – 3580 finds application in water-based coatings with a pH range of four to ten. view less | |
| AFCONA - 3581 | AFCONA Additives Sdn Bhd | AFCONA – 3581 is an organically modified polysiloxane. This clear to slightly yellow liquid is 50% solid and functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling prop...view more AFCONA – 3581 is an organically modified polysiloxane. This clear to slightly yellow liquid is 50% solid and functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low foam stabilization in water. AFCONA – 3581 finds application in electro deposition coatings, and water-based coatings with a pH range of four to ten. view less | |
| AFCONA - 3581E | AFCONA Additives Sdn Bhd | AFCONA – 3581E is an organically modified polysiloxane. This clear to slightly yellow liquid consists of 52% effective substance and functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate w...view more AFCONA – 3581E is an organically modified polysiloxane. This clear to slightly yellow liquid consists of 52% effective substance and functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low foam stabilization in water. AFCONA – 3581E finds application in electro deposition coatings, and water-based coatings with a pH range of four to ten. view less | |
| AFCONA - 3585 | AFCONA Additives Sdn Bhd | AFCONA – 3585 is an organically modified polysiloxane. This clear to slightly yellow liquid functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low f...view more AFCONA – 3585 is an organically modified polysiloxane. This clear to slightly yellow liquid functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low foam stabilization. AFCONA – 3585 has strong surface tension reduction, and is compatible, finding application in water-based coatings. view less | |
| AFCONA - 3835 | AFCONA Additives Sdn Bhd | AFCONA – 3835 is an organically modified polyether reactive polysiloxane. This clear to slightly yellow liquid functions as a cross-linkable slip and leveling additive. AFONCA – 3585 finds application in ultraviolet coatings, anti-blocking and anti-scratc...view more AFCONA – 3835 is an organically modified polyether reactive polysiloxane. This clear to slightly yellow liquid functions as a cross-linkable slip and leveling additive. AFONCA – 3585 finds application in ultraviolet coatings, anti-blocking and anti-scratch coatings, ultraviolet and EB curing systems, and in systems requiring an unsaturated bond cross-linking in the primary curing reaction, such as UPE systems. view less | |
| Agent 506 | Guangzhou Baohui Resin Co., Ltd. | Agent 506 is a wear-resistant epoxy modified silicone. This product can enhance leveling, generate a sense of silky soft satin. It can be used in flexible rubber paint and UV paint. | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...view more BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. view less | |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...view more BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. view less | |
| Borchi® Gol H 250 | OMG Borchers GmbH | Borchi® Gol H 250 is a leveling agent for baking enamels such as coil and can-coat paints. It improves flow properties. Because of its good compatibility, it can be used in numerous paint systems. lf used in polyurethane systems, a secondary reaction with...view more Borchi® Gol H 250 is a leveling agent for baking enamels such as coil and can-coat paints. It improves flow properties. Because of its good compatibility, it can be used in numerous paint systems. lf used in polyurethane systems, a secondary reaction with the solvent n-butanol may occur. view less | |
| Borchi® Gol LA 200 | OMG Borchers GmbH | Borchi® Gol LA 200 is a solventless modified polysiloxane which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmen...view more Borchi® Gol LA 200 is a solventless modified polysiloxane which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmented industrial (including OEM, car repair) and all types of decorative coatings. It also positively influences optical film properties. view less | |
| Borchi® Gol LA 232 | OMG Borchers GmbH | Borchi® Gol LA 232 is a solventless combination of modified polysiloxane and alcohol alcoxylated, which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be...view more Borchi® Gol LA 232 is a solventless combination of modified polysiloxane and alcohol alcoxylated, which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmented industrial (including OEM, car repair) and all types of decorative coatings. It can be also used in systems for the production of radiation-curable coatings for wood, wood-based materials, plastic, paper and printing inks. view less | |
| Borchi® Gol LA 50 | OMG Borchers GmbH | Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the...view more Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the interfacial tension differences between the liquid and the substrate. This product reduces cratering and pin hole tendency and is compatible in most binders. It can be used for high quality clears and pigmented industrial and decorative coatings. view less | |
| Borchi® Gol LAC 80 | OMG Borchers GmbH | Borchi® Gol LAC 80 is a paint additive for improving the flow properties and surface smoothness of paints and coatings. lt is suitable for solvent-containing and solvent-free systems. This product can also be used in aqueous media. It brings about a clear...view more Borchi® Gol LAC 80 is a paint additive for improving the flow properties and surface smoothness of paints and coatings. lt is suitable for solvent-containing and solvent-free systems. This product can also be used in aqueous media. It brings about a clear increase in the surface smoothness of paint films and results in an appreciable reduction in susceptibility to scratching, particularly in the case of matt paints. view less | |
| Borchi® Gol M 101 | OMG Borchers GmbH | Borchi® Gol M 101 is a leveling and anti-floating agent. It acts as a flow-promoter, appreciably reduces surface tension and prevents horizontal floating of pigments. This product is particularly effective in systems which dry physically, in alkyd/amino r...view more Borchi® Gol M 101 is a leveling and anti-floating agent. It acts as a flow-promoter, appreciably reduces surface tension and prevents horizontal floating of pigments. This product is particularly effective in systems which dry physically, in alkyd/amino resin combination and in silicone resin paints, but its binder capability is limited. view less | |
| Borchi® Gol M 51 | OMG Borchers GmbH | Borchi® Gol M 51 is a leveling and anti-floating agent. It is a very effective flow-promoter and appreciably reduces surface tension. lt acts as an anti-floating agent and can be used as an "anti-silicone", i.e. it counteracts defects in the surface of pa...view more Borchi® Gol M 51 is a leveling and anti-floating agent. It is a very effective flow-promoter and appreciably reduces surface tension. lt acts as an anti-floating agent and can be used as an "anti-silicone", i.e. it counteracts defects in the surface of paint films which may be caused by silicones in polishes. This product can be used both in systems which dry physically and in chemically curing systems, but its binder compatibility is limited. view less | |
| Borchi® Gol MA | OMG Borchers GmbH | Borchi® Gol MA is a leveling and anti-floating agent. lt reduces surface tension and prevents horizontal floating of pigments. This product is very well suited to use in polymers which dry physically. lt acts as a very effective flow-promoter in numerous ...view more Borchi® Gol MA is a leveling and anti-floating agent. lt reduces surface tension and prevents horizontal floating of pigments. This product is very well suited to use in polymers which dry physically. lt acts as a very effective flow-promoter in numerous alkyd paints. In unsaturated polyester paints containing paraffin, it promotes uniform floating of the paraffin and de-aeration. However, the binder compatibility of this product is limited. view less | |
| Borchi® Gol OL 17 | OMG Borchers GmbH | Borchi® Gol OL 17 is an additive used to improve flow properties and surface smoothness. This product eliminates spray structures, orange-peel and prevents the formation of craters. It is characterised by good binder compatibility and a high degree of eff...view more Borchi® Gol OL 17 is an additive used to improve flow properties and surface smoothness. This product eliminates spray structures, orange-peel and prevents the formation of craters. It is characterised by good binder compatibility and a high degree of efficiency in many binders. This product is water-soluble but its use in such solutions should always be preceded by extensive trials on account of their limited stability in waterborne binders. view less | |
| Borchi® Gol OL 31 | OMG Borchers GmbH | Borchi® Gol OL 31 is an additive used to improve slip and leveling properties. This product is a very effective levelling agent. lt eliminates craters, spray structures and surface defects that may be caused by silicone products (e.g. in polishes). This p...view more Borchi® Gol OL 31 is an additive used to improve slip and leveling properties. This product is a very effective levelling agent. lt eliminates craters, spray structures and surface defects that may be caused by silicone products (e.g. in polishes). This product is usable in paints which dry physically as well as in chemically curing paints. lt is characterized by good binder compatibility and is particularly suitable for use in silicone resins. view less | |
| Borchi® Gol OL 44 | OMG Borchers GmbH | Borchi® Gol OL 44 is an additive used to improve slip and leveling properties. It is an effective levelling agent. This product eliminates craters and spray structures and increases slip properties. It is very versatile and is characterized by good to ver...view more Borchi® Gol OL 44 is an additive used to improve slip and leveling properties. It is an effective levelling agent. This product eliminates craters and spray structures and increases slip properties. It is very versatile and is characterized by good to very good efficiency in baking paints based on alkyd resin, alkyd / amino resin combinations and in acrylic resin and acrylic / amino resin combinations. view less | |
| Borchi® Gol PL | OMG Borchers GmbH | Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reductio...view more Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primers and undercoats. This product is particularly effective in unsaturated, paraffin-free polyester resins, epoxy resins and combinations of epoxy resins with phenolic resins or amino resins. view less | |
| BRB Siloen® WA 264 | BRB International BV | BRB Siloen® WA 264 is a polyether-modified siloxane. It is a silicone surfactant for aqueous coatings with excellent wetting and levelling properties. | |
| BYK®-300 | BYK 毕克 | BYK®-300 is a solution of a polyether modified polydimethylsiloxane. This product is a standard surface additive in the coatings industry for all solvent-borne systems. | |
| BYK®-313 | BYK 毕克 | BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properti...view more BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow and leveling of solvent-borne systems, very effective at low film thickness, increases gloss, strong increase of surface slip, FDA § 175.300 compliant, BYK-313 is a heat-resistant silicone due to the polyester modification, in baking systems, no loss in adhesion and no surface defects occur, no thermal decomposition at temperatures between 150°C and 230°C like polyether-modified silicones do, HAPS and aromatic-free. view less | |
| BYK®-320 | BYK 毕克 | BYK®-320 is a solution of a polyether modified polymethylalkylsiloxane. This product is a silicone leveling additive with defoaming properties. It is particularly suitable for non-polar to medium-polar paint systems. Its defoaming activity rises with incr...view more BYK®-320 is a solution of a polyether modified polymethylalkylsiloxane. This product is a silicone leveling additive with defoaming properties. It is particularly suitable for non-polar to medium-polar paint systems. Its defoaming activity rises with increasing coating polarity. In automotive and industrial coatings, BYK-320 will not exhibit problems with ghosting or telegraphing. To avoid these effects BYK-320 should be added to the paint which has to be recoated. view less | |
| BYK®-322 | BYK 毕克 | BYK®-322 is aralkyl modified polymethylalkylsiloxane. This product is a silicone additive which is thermally stable at baking temperatures up to 250°C. Causing only a slight surface tension reduction, it does not normally stabilize foam and can even impa...view more BYK®-322 is aralkyl modified polymethylalkylsiloxane. This product is a silicone additive which is thermally stable at baking temperatures up to 250°C. Causing only a slight surface tension reduction, it does not normally stabilize foam and can even impart a defoaming action. Coatings containing BYK-322 can normally be recoated without any loss of adhesion. view less | |
| BYK®-323 | BYK 毕克 | BYK®-323 is an aralkyl modified polymethylalkylsiloxane. This product acts in a defoaming fashion (i.e., no or only slight foam stabilization), depending on the polarity of the paint system. It is heat resistant up to 250°C and does not decrease intercoat...view more BYK®-323 is an aralkyl modified polymethylalkylsiloxane. This product acts in a defoaming fashion (i.e., no or only slight foam stabilization), depending on the polarity of the paint system. It is heat resistant up to 250°C and does not decrease intercoat adhesion when overcoated. In wood and furniture coatings, BYK-323 is used to orient the flatting agent in flat topcoats and in multi-coat systems. Even in difficult to flat high-solids polyurethane, acid curing and unsaturated polyester coatings, the use of BYK-323 does not lead to shining up. In addition, optimal orientation of the flatting agent is achieved. In flow coat systems, BYK-323 provides a stable curtain. In industrial coatings, BYK-323 supports the orientation of flatting agents and aluminium flakes in metallics. view less | |
| BYK-325 N | BYK 毕克 | BYK-325 N is a solution of a polyether modified polymethylalkylsiloxane. This product prevents ghosting (wipe-marks) if recoated with the same paint. It typically does not cause rewetting problems and does not influence recoatability. These additives prov...view more BYK-325 N is a solution of a polyether modified polymethylalkylsiloxane. This product prevents ghosting (wipe-marks) if recoated with the same paint. It typically does not cause rewetting problems and does not influence recoatability. These additives provide a slight reduction of surface tension of paint systems. Therefore, they improve flow and leveling as well as display partial defoaming properties. Additionally, they prevent Bénard cell formation. view less | |
| BYK®-325 N | BYK 毕克 | BYK®-325 N is a silicone-containing surface additive for solvent-borne coatings to improve leveling, with a slight reduction in surface tension and minor increase in surface slip. | |
| BYK®-333 | BYK 毕克 | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less | |
| BYK®-345 | BYK 毕克 | BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilizatio...view more BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. view less | |
| BYK®-3450 | BYK 毕克 | BYK®-3450 is a silicone surfactant for aqueous printing inks and overprint varnishes, inkjet inks, aqueous coatings, adhesives, and care products providing a significant reduction in surface tension. Particularly suitable for improving the wetting of aque...view more BYK®-3450 is a silicone surfactant for aqueous printing inks and overprint varnishes, inkjet inks, aqueous coatings, adhesives, and care products providing a significant reduction in surface tension. Particularly suitable for improving the wetting of aqueous systems on very non-polar substrates. Does not increase the surface slip. view less | |
| BYK®-3451 | BYK 毕克 | BYK®-3451 is a silicone surfactant for aqueous printing inks and overprint varnishes, inkjet inks, aqueous coatings, adhesives, and care products providing a significant reduction in surface tension. Particularly suitable for improving the wetting of aque...view more BYK®-3451 is a silicone surfactant for aqueous printing inks and overprint varnishes, inkjet inks, aqueous coatings, adhesives, and care products providing a significant reduction in surface tension. Particularly suitable for improving the wetting of aqueous systems on very non-polar substrates. Does not increase the surface slip. view less | |
| BYK®-3456 | BYK 毕克 | BYK®-3456 is a fluorine-free, silicone-containing additive for improving substrate wetting and leveling in aqueous systems and solvent-free UV coatings. | |
| BYK®-346 | BYK 毕克 | BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...view more BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. view less | |
| BYK®-347 | BYK 毕克 | BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...view more BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. view less | |
| BYK®-348 | BYK 毕克 | BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...view more BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. view less | |
| BYK®-3480 | BYK 毕克 | BYK®-3480 is a 100% silicone surfactant for aqueous systems to improve substrate wetting by means of a strongly reduced surface tension in the liquid coating. Excellent defoaming properties and anti-cratering effect combined with good leveling properties;...view more BYK®-3480 is a 100% silicone surfactant for aqueous systems to improve substrate wetting by means of a strongly reduced surface tension in the liquid coating. Excellent defoaming properties and anti-cratering effect combined with good leveling properties; particularly suitable for pigmented systems. view less | |
| BYK®-3481 | BYK 毕克 | BYK®-3481 is a 100% silicone surfactant for aqueous systems to improve substrate wetting by means of a strongly reduced surface tension in the liquid coating. Excellent defoaming properties and anti-cratering effect combined with good leveling properties,...view more BYK®-3481 is a 100% silicone surfactant for aqueous systems to improve substrate wetting by means of a strongly reduced surface tension in the liquid coating. Excellent defoaming properties and anti-cratering effect combined with good leveling properties, particularly suitable for clearcoats. view less | |
| BYK®-349 | BYK 毕克 | BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...view more BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. view less | |
| BYK®-370 | BYK 毕克 | BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethan...view more BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine, self-crosslinking acrylates, and epoxies. BYK-370 increases the surface slip. view less | |
| BYK®-3751 | BYK 毕克 | BYK®-3751 is a silicone surface additive for solvent-borne and aqueous systems with a medium reduction in surface tension. | |
| BYK®-UV 3500 | BYK 毕克 | BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to...view more BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to crosslinking by acryl functionality. In non-aqueous radiation curable systems BYK-UV 3500 gives excellent surface slip and tape release with permanent effect due to crosslinking by acryl functionality, as well as improved leveling. view less | |
| BYK®-UV 3510 | BYK 毕克 | BYK®-UV 3510 is a surface additive for radiation curing systems. It is a polyether modified polydimethylsiloxane. In non-aqueous systems BYK-UV 3510 improves substrate wetting and tape release as well as leveling, and increases surface slip. | |
| BYK®-UV 3530 | BYK 毕克 | BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueou...view more BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueous radiation curable systems leveling is improved. The surface tension, foam behavior or transparency are scarcely influenced. view less | |
| BYK®-UV 3570 | BYK 毕克 | BYK®-UV 3570 is a surface additive for radiation curable systems. It is a 70% solution of a polyester modified acrylic functional poly-dimethyl-siloxane in PONPGDA (propoxylated 2 neopentyl glycol diacrylate). This product exhibits, depending on the level...view more BYK®-UV 3570 is a surface additive for radiation curable systems. It is a 70% solution of a polyester modified acrylic functional poly-dimethyl-siloxane in PONPGDA (propoxylated 2 neopentyl glycol diacrylate). This product exhibits, depending on the level, controlled improvement of surface slip and allows easy surface slip adjustment. BYK-UV 3570 improves leveling, substrate wetting and orientation of flatting agents. It has a high acrylic functionality and is solvent-free. BYK-UV 3570 does not need to be labeled in accordance with EC-Directive 88/379/EWG and is nonhazardous as defined in ADR/RID, IMDG/IMO, ICAO/IATA regulations. view less | |
| CV1-1142 | NuSil Silicone Technology 1 | CV1-1142 is a one-part, translucent, self leveling RTV silicone. It can be used as a sealant, caulking, adhesive or potting material in electric and space applications that require little outgassing. It is also ideal for using as a sealant or bond with co...view more CV1-1142 is a one-part, translucent, self leveling RTV silicone. It can be used as a sealant, caulking, adhesive or potting material in electric and space applications that require little outgassing. It is also ideal for using as a sealant or bond with controlled flow for consistent bond lines in applications that require a high extrusion rate and one-part material. view less | |
| CV1-1142-4 | NuSil Silicone Technology 1 | CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensit...view more CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. The product also has a built in UV tracer and it can be used for applications that require a broad operating temperature range. view less | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolym...view more DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. view less | |
| DOWSIL™ 29 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 3 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, a...view more DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. view less | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | |
| DOWSIL™ 7 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. view less | |
| EDAPLAN® LA 412 | Munzing Chemie | EDAPLAN® LA 4122 is a colourless to slightly yellowish liquid suitable for all solvent based coating and printing ink systems, specifically gravure inks. It significantly reduces surface tension. EDAPLAN® LA 412 improves surface properties like leveling, ...view more EDAPLAN® LA 4122 is a colourless to slightly yellowish liquid suitable for all solvent based coating and printing ink systems, specifically gravure inks. It significantly reduces surface tension. EDAPLAN® LA 412 improves surface properties like leveling, scratch resistance and slip. It does not influence recoatibility. It also prevents effects of heat shock during drying of the applied coating, e.g. fish eyes. view less | |
| EDAPLAN® LA 413 | Munzing Chemie | EDAPLAN® LA 413 is a brownish liquid additive suitable for all non-aqueous and water reducible coating systems. It improves slip, scratch resistance and leveling. EDAPLAN® LA 413 provides improved surface properties specifically in clear systems. | |
| EFKA® SI 2722 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in ...view more EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy systems and solvent-free polyurethane systems. view less | |
| EFKA® SL 3030 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysil...view more EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. view less | |
| EFKA® SL 3031 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3031 is a slip, leveling and antiblocking additive that is compatible with all medium to high-polarity solvent based systems. It improves mar-resistance, slip and smoothness, decreases the tendency to floating of pigments and the sensitivity to a...view more EFKA® SL 3031 is a slip, leveling and antiblocking additive that is compatible with all medium to high-polarity solvent based systems. It improves mar-resistance, slip and smoothness, decreases the tendency to floating of pigments and the sensitivity to air-draughts. EFKA® SL 3031 is compatible with all medium- to high-polarity solventbased systems. In unsaturated polyesters, e.g., UV-curable, EFKA® SL 3031 improves slip and smoothness of the surface with no influence on curtain stability when applied by curtain coating. The sensitivity to air drafts when sprayed or poured will be reduced by EFKA® SL 3031. This product also improves leveling and mar resistance and acts as an antiblocking agent. This is particularly advantageous in PUR systems based on hydroxyl acrylics. Due to its high surface activity, EFKA® SL 3031 can interfere with intercoat adhesion when recoated without sanding. If air is introduced by the application equipment, small amounts of defoamers such as EFKA® PB 2020 and EFKA® SI 2022 should be added. view less | |
| EFKA® SL 3033 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...view more EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. view less | |
| EFKA® SL 3035 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3035 is an organically modified polysiloxane that can be used in water and solvent based coatings. It provides improved leveling and increases slip and mar-resistance. It prevents floating and is hydrolysis resistant. Due to its excellent compati...view more EFKA® SL 3035 is an organically modified polysiloxane that can be used in water and solvent based coatings. It provides improved leveling and increases slip and mar-resistance. It prevents floating and is hydrolysis resistant. Due to its excellent compatibility, EFKA® SL 3035 is particularly recommended for polyurethane and polyester wood coatings. It helps to prevent curtain rupture in curtain coating applications. view less | |
| Efka® SL 3200 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3200 (formerly Perenol® S Conc) is an additive for improving the flow and the slip of solvent-based and solventless coatings. It is a solventless polysiloxane block polymer corresponding in performance to other flow or slip agents of the Perenol®...view more Efka® SL 3200 (formerly Perenol® S Conc) is an additive for improving the flow and the slip of solvent-based and solventless coatings. It is a solventless polysiloxane block polymer corresponding in performance to other flow or slip agents of the Perenol® S range. This product is a clear to slightly cloudy liquid that is a copolysiloxane in chemical nature. view less | |
| EFKA® SL 3210 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA...view more EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA® SL 3210 is relatively insensitive to pinholing - even at high concentrations of the additive. This clear, colorless liquid may be used in water-based, solvent-based and UV-curable printing inks and over-print varnishes. EFKA® SL 3210 is especially effective in nitrocellulose-based systems for flexographic and gravure printing. It is also effective in UV flexographic printing. view less | |
| EFKA® SL 3236 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...view more EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. view less | |
| Efka® SL 3239 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3239 (formerly Efka® 3239) is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones. It is insoluble in water. This product improves leveling and surface smoothness, increases slip and mar-resist...view more Efka® SL 3239 (formerly Efka® 3239) is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones. It is insoluble in water. This product improves leveling and surface smoothness, increases slip and mar-resistance and acts as a defoamer and de-aeration aid. Efka® SL 3239 is particularly recommended for these coatings: baking enamels based on alkyd, acrylic or polyester resins; acid-curable or polyurethane wood finishes particularly when applied by curtain coating; self-leveling epoxy flooring compounds; and UV-curable paper lacquers. view less | |
| Efka® SL 3258 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3258 (formerly Perenol® S 58) is a clear-hazy liquid that is a non-reactive slip modifier and leveling agent for printing inks. | |
| Efka® SL 3259 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3259 (formerly Perenol® S 59) is a non-reactive, highly efficient and solvent free slip and leveling/wetting agent for printing inks, overprint varnishes, coatings and paints. Being compatible with a wide range of resins, it enhances excellent su...view more Efka® SL 3259 (formerly Perenol® S 59) is a non-reactive, highly efficient and solvent free slip and leveling/wetting agent for printing inks, overprint varnishes, coatings and paints. Being compatible with a wide range of resins, it enhances excellent substrate wetting due to the reduction of the surface tension of the liquid film. Efka® SL 3259 improves gloss, scratch resistance and leveling of coatings. It is a clear to slightly hazy colorless liquid and is well suitable for UV-based as well as solvent- and water-based applications. view less | |
| EFKA® SL 3288 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3288 is an additive designed to improve slip, levelling, surface smoothness and ‘soft-touch’ effect in high gloss coatings. It has a minimal effect on foam stabilisation and intercoat adhesion. Due to its excellent compatibility properties, it is...view more EFKA® SL 3288 is an additive designed to improve slip, levelling, surface smoothness and ‘soft-touch’ effect in high gloss coatings. It has a minimal effect on foam stabilisation and intercoat adhesion. Due to its excellent compatibility properties, it is very suitable for use in high-gloss clear coatings without causing haze. EFKA® SL 3288 is recommended for all kinds of solvent-based high-gloss coatings, especially wood finishes. It is also suitable for water-based industrial coatings. view less | |
| EFKA® SL 3299 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3299 is a very effective additive, which increases slip, surface smoothness and gloss. Due to its excellent compatibility properties, it is very suitable for use in high-gloss clear wood coatings. | |
| Efka® SL 3883 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3883 (formerly Efka® 3883) is a polysiloxane-modified polymer which is terminated by unsaturated groups. These reactive groups crosslink with coating and printing ink systems which are cured by photo initiators or peroxides. The incorporation of ...view more Efka® SL 3883 (formerly Efka® 3883) is a polysiloxane-modified polymer which is terminated by unsaturated groups. These reactive groups crosslink with coating and printing ink systems which are cured by photo initiators or peroxides. The incorporation of Efka® SL 3883 into wood finishes, plastics coatings and paper finishes results in the following advantages: improved leveling, slip and surface smoothness, increased anti-blocking effect, better substrate wetting, and more even distribution of matting agent. view less | |
| Efka® SL 3886 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3886 (formerly Efka® 3886) is a polyisocyanates modified polysiloxane designed to crosslink with hydroxyl or carboxyl groups. It provides improved leveling and reduced tendency for orange-peel or cratering. This product is used for all polyuretha...view more Efka® SL 3886 (formerly Efka® 3886) is a polyisocyanates modified polysiloxane designed to crosslink with hydroxyl or carboxyl groups. It provides improved leveling and reduced tendency for orange-peel or cratering. This product is used for all polyurethane systems such as wood finishes. view less | |
| Efka® SL 3888 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® SL 3888 (formerly Efka® 3888) slip & leveling agent designed to crosslink with hydroxyl or carboxyl groups. It is compatible with most polyisocyanates, e.g., Basonat® grades. The addition of Efka® SL 3888 into polyurethane lacquers or coatings offer...view more Efka® SL 3888 (formerly Efka® 3888) slip & leveling agent designed to crosslink with hydroxyl or carboxyl groups. It is compatible with most polyisocyanates, e.g., Basonat® grades. The addition of Efka® SL 3888 into polyurethane lacquers or coatings offers: improved leveling, reduced tendency for orange peel effect or cratering, and improved slip and surface smoothness. These improvements are more permanent as the additives crosslink and are part of the final film. It also offers reduced surface tension with little or no foam formation and prevention of Bénard cells (anti-floating effect). view less | |
| Greesol™ LE7 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production o...view more Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. view less |
