| Bayhydrol® UV 2282 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2282 is a waterborne, UV-curing polyurethane dispersion that can be used in the formulation of physically drying, waterborne UV-curing wood and plastic coatings. This product has a flow time at 23°C, (4mmcup) of ≤ 50, a non-volatile content ...view more Bayhydrol® UV 2282 is a waterborne, UV-curing polyurethane dispersion that can be used in the formulation of physically drying, waterborne UV-curing wood and plastic coatings. This product has a flow time at 23°C, (4mmcup) of ≤ 50, a non-volatile content (1g / 1h / 125°C) of 39 ± 1, and a pH level of 7.75 ± 0.75. Bayhydrol® UV 2282 is used in the formulation of High Quality Waterborne UV-curing Wood coatings, that will normally pass the DIN 68 861-1B norm. After the water has evaporated, the coating is physically dry and handable. UV-Curing (10 m/min per 80 W/cm lamp) will result in a very high final quality. The photo initiator demand is low, 1-2% will be enough (by wt., calculated on solid binder). Coatings based on Bayhydrol® UV 2282 will show good adherence to many substrates, including plastics. view less | |
| Bayhydrol® UV 2317 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2317 is a urethane acrylate dispersion that can be used in the formulation of physically drying aqueous UV-curing coatings. This is a clear lacquer that is characterized by its good reemulsification properties and high wet film transparency....view more Bayhydrol® UV 2317 is a urethane acrylate dispersion that can be used in the formulation of physically drying aqueous UV-curing coatings. This is a clear lacquer that is characterized by its good reemulsification properties and high wet film transparency. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 35.5-37.5, a flow time at 23°C, (4 mm cup) of 15-80, and a pH-value of 6.8-8.5. Bayhydrol® UV 2317 is used in the formulation of aqueous UV-curing coatings, especially for application on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1-2.5% by wt. photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. The viscosity is adjusted by the addition of polyurethane thickeners. If antifoams are used, they should be thinned in solvents, especially if application is by curtain coating. view less | |
| Bayhydrol® UV 2689/1 XP | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2689/1 XP is a UV-curable aliphatic polyurethane dispersion, which can be used in the formulation of industrial waterborne UV clear and pigmented coatings. Main applications of this product are plastic coatings (e.g mobile phones) and wood c...view more Bayhydrol® UV 2689/1 XP is a UV-curable aliphatic polyurethane dispersion, which can be used in the formulation of industrial waterborne UV clear and pigmented coatings. Main applications of this product are plastic coatings (e.g mobile phones) and wood coatings. Before UV curing, the surface of dried films is soft and slightly tacky, whereas after UV-curing, the coatings are hard with high chemical and mechanical resistance. The product is suitable to achieve high gloss coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 40.0-44.0, a flow time at 23°C, (4 mm cup) of 15.0-50.0, and a pH level of 7.0-8.5. This product is especially suitable for 3C plastic applications e.g. mobile phones and laptops where high performance coatings are required. It is possible to formulate hard high gloss or deep matt clear coats as well as single layer metallic coatings. The resulting coating provides excellent performance meeting the strict requirements of 3C applications. view less | |
| Bayhydrol® UV 2720/1 XP | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings for industrial coating of plastics and wood and other substrates, and is particularly suitable for pigmented systems. As a thermoformable product, it is an ideal solution for po...view more Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings for industrial coating of plastics and wood and other substrates, and is particularly suitable for pigmented systems. As a thermoformable product, it is an ideal solution for postformable coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 39-41, a flow time at 23°C, (4 mm cup) of 15-50, and a pH level of 7.0-9.0. Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings, in particular for applications that require good blocking resistance after water evaporation and before UV cure (wood, plastic, pigmented systems). The addition of 1.0 to 2.5 wt. photoinitiator relative to binder has proven effective for initiation. Viscosity is adjusted by the addition of polyurethane thickeners. As the dispersion has a relatively high surface tension, the formulation should always contain a wetting agent, such as BYK® 348 (BYK). Matting agents and additives can be dispersed directly into the formulation using a dissolver. view less | |
| Bayhydrol® UV XP 2687 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2687 is an urethane Acrylate Emulsion that is used in the formulation of waterborne UV curable coatings for wood. It is an emulsion type with high gloss and strong body. This product has a non-volatile content (1g / 1h / 125°C, convection...view more Bayhydrol® UV XP 2687 is an urethane Acrylate Emulsion that is used in the formulation of waterborne UV curable coatings for wood. It is an emulsion type with high gloss and strong body. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 46.0-51.0, a viscosity at 23°C of 50-500, and a ph-value of 6.8-8.5. Bayhydrol® UV XP 2687 is used for the formulation of waterborne UV coatings, especially for application on wood/wood materials. As the dispersion has a relatively high surface tension, the formulation should always contain a wetting agent, such as BYK® 348 (BYK), Surfinol MD 20 (Airproducts) or EFKA 3024 (BASF).Viscosity is set by the addition of polyurethane thickeners. Matting agents should be added in the form of pastes. view less | |
| Bayhydrol® UV XP 2690 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2690 is a UV-curing PU-dispersion that is used for the formulation of waterborne UV coatings for wood and plastic coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 38-40, a viscosity at 23°C of < 80, ...view more Bayhydrol® UV XP 2690 is a UV-curing PU-dispersion that is used for the formulation of waterborne UV coatings for wood and plastic coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 38-40, a viscosity at 23°C of < 80, and a pH level of approx. 7.5-9. For the formulation of weather resistant coatings, the use of light protecting agents (preferably a combination of UV absorbers and hindered amine light stabilizers) is recommended. A modification of the photoinitiator component towards longer absorbing types (MAPO, BAPO) might be necessary. The resulting formulation should always be tested in weathering experiments with regard to the specific substrate, application and curing conditions. view less | |
| Bayhydrol® UV XP 2775 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2775 is a solvent-free urethane acrylate dispersion, that is used for the formulation of waterborne UV clear or pigmented wood and plastic coatings, in particular for highly pigmented wood coatings. Especially usable for white pigmented c...view more Bayhydrol® UV XP 2775 is a solvent-free urethane acrylate dispersion, that is used for the formulation of waterborne UV clear or pigmented wood and plastic coatings, in particular for highly pigmented wood coatings. Especially usable for white pigmented coatings with high pigment content and resistance properties. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 39.0-42.0, a viscosity at 23°C of < 150, and a pH level of approx. 7.0-9.0. Bayhydrol® UV XP 2775 is used for the formulation of high quality waterborne UV coatings for furniture.Depending on the formulation and the method of application, it is possible to produce finished surfaces that conform to the resistance requirements of DIN 68861, 1B. Bayhydrol® UV XP 2775 is especially usable for white pigmented coatings with high pigment content and resistance properties. After evaporation of water, the coating is physically dry and tack-free. view less | |
| EBECRYL® 4101 | Allnex | EBECRYL® 4101 is an undiluted, unsaturated aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film. Coatings formulated with EBECRYL® 4101 are characterized by good chemical resistant properties, mechanical resi...view more EBECRYL® 4101 is an undiluted, unsaturated aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film. Coatings formulated with EBECRYL® 4101 are characterized by good chemical resistant properties, mechanical resistant properties, and high flexibility. view less | Request Sample |
| EBECRYL® 4150 | Allnex | EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure proc...view more EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). The product is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal and exotic woods. view less | Request Sample |
| EBECRYL® 4201 | Allnex | EBECRYL® 4201 is an undiluted, unsaturated aliphatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance. Coatings based on EBECRYL® 4201 are characterized by high elasticity, good chemical and mecha...view more EBECRYL® 4201 is an undiluted, unsaturated aliphatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance. Coatings based on EBECRYL® 4201 are characterized by high elasticity, good chemical and mechanical resistance properties, and outstanding abrasion resistance, in particular according to the grit feeder method. view less | Request Sample |
| EBECRYL® 4220 | Allnex | EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application...view more EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| EBECRYL® 4265 | Allnex | EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curabl...view more EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| EBECRYL® 4381 | Allnex | EBECRYL® 4381 is a unsaturated polyester resin diluted in 30% dipropyleneglycol diacrylate (DPGDA). It is recommended to use in highly reactive radiation curing primers and coatings (UV and electron beam). Primers and coatings can be applied on wood by ro...view more EBECRYL® 4381 is a unsaturated polyester resin diluted in 30% dipropyleneglycol diacrylate (DPGDA). It is recommended to use in highly reactive radiation curing primers and coatings (UV and electron beam). Primers and coatings can be applied on wood by roller-coating and curtain coating. view less | Request Sample |
| EBECRYL® 4396 | Allnex | EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formul...view more EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV/EB curing coatings to improve the adhesion on substrates such as plastic, metal and exotic woods. view less | Request Sample |
| EBECRYL® 4397 | Allnex | EBECRYL® 4397 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. | Request Sample |
| EBECRYL® 4491 | Allnex | EBECRYL® 4491 is an aliphatic urethane acrylate supplied in 20% isobornyl methacrylate (IBOMA). It is designed for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL 4491 are characterized by ...view more EBECRYL® 4491 is an aliphatic urethane acrylate supplied in 20% isobornyl methacrylate (IBOMA). It is designed for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL 4491 are characterized by very high flexibility and elongation at break. Cured films display rubber-elastic properties. view less | Request Sample |
| EBECRYL® 4501 | Allnex | EBECRYL® 4501 is an undiluted aromatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance. UV/EB coatings based on EBECRYL® 4501 are characterized by high flexibility, good coin scratch resistance, ...view more EBECRYL® 4501 is an undiluted aromatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance. UV/EB coatings based on EBECRYL® 4501 are characterized by high flexibility, good coin scratch resistance, and high abrasion resistance, in particular according to the grit feeder method. view less | Request Sample |
| EBECRYL® 4510 | Allnex | EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It...view more EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV curing coatings to improve the adhesion on substrates as plastic, metal and exotic woods. view less | Request Sample |
| EBECRYL® 4513 | Allnex | EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formula...view more EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing. view less | Request Sample |
| EBECRYL® 4587 | Allnex | EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance...view more EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes. view less | Request Sample |
| EBECRYL® 8209 | Allnex | EBECRYL® 8209 is a Sn-free aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet (UV) light or electron beam (EB). Cured films of EBECRYL® 8209 exhibit high hardness, abrasion and solvent resistance. | Request Sample |
| Idroben UV 747 | Benasedo | Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on w...view more Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on wood and MDF substartes and, in particolar cases, could be also used for metal. view less | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...view more L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. view less | |
| UCECOAT® 7520 | Allnex | UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCEC...view more UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation resin or in combination with other water-borne resins. view less | Request Sample |
| UCECOAT® 7655 | Allnex | UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. Developed for high end wooden furniture top coats, both transparent and pigmented, it can be used for other applications and substrate...view more UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. Developed for high end wooden furniture top coats, both transparent and pigmented, it can be used for other applications and substrates. view less | Request Sample |
| UCECOAT® 7690 | Allnex | UCECOAT® 7690 is a Tin free radiation curable polyurethane dispersion with an excellent outdoor durability. It can be used in varied exterior applications and on a wide array of substrates. The product is tack-free after water evaporation and has an excel...view more UCECOAT® 7690 is a Tin free radiation curable polyurethane dispersion with an excellent outdoor durability. It can be used in varied exterior applications and on a wide array of substrates. The product is tack-free after water evaporation and has an excellent water release. Because of its non-irritant nature and low viscosity, it can be applied safely by spray, roller and curtain coating. view less | Request Sample |
| UCECOAT® 7700 | Allnex | UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented,...view more UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. view less | Request Sample |
| UCECOAT® 7701 | Allnex | UCECOAT® 7701 is the MIT- and Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially p...view more UCECOAT® 7701 is the MIT- and Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. view less | Request Sample |
| UCECOAT® 7717 | Allnex | UCECOAT® 7717 is a solvent free, energy curable polyurethane dispersion, with low tack after drying and before UV/EB curing. The special combination of low tack, and not physically drying before cure, makes UCECOAT® 7717 the ideal product for high “Anfeue...view more UCECOAT® 7717 is a solvent free, energy curable polyurethane dispersion, with low tack after drying and before UV/EB curing. The special combination of low tack, and not physically drying before cure, makes UCECOAT® 7717 the ideal product for high “Anfeuerung” primers and combined applications with stains. UCECOAT® 7717 can be applied by spray or roller coater. view less | Request Sample |
| UCECOAT® 7850 | Allnex | UCECOAT® 7850 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non-irritant nature and low viscosity,...view more UCECOAT® 7850 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non-irritant nature and low viscosity, it and can be applied safely by spray coating and curtain coating. view less | Request Sample |
| UCECOAT® 7856 | Allnex | UCECOAT® 7856 is a new high-solids and solvent-free radiation curable polyurethane dispersion suitable for high gloss applications with excellent clarity and distinctness of image (DOI). The product has an excellent colloidal stability (shelf life of 12 m...view more UCECOAT® 7856 is a new high-solids and solvent-free radiation curable polyurethane dispersion suitable for high gloss applications with excellent clarity and distinctness of image (DOI). The product has an excellent colloidal stability (shelf life of 12 months) and complies with VOC-free, tinfree and stenomer-free requirements. Due to its low viscosity and its good responsiveness to rheology modifiers, it can be easily applied by spray, roller or curtain coating operation. The product can be advantageously applied in one single coat and does not require sanding (although it can still benefit from polishing). The cured coating exhibits good chemical and scratch resistance required for high-end wooden furniture topcoats, although it can also be used for other substrates and applications. view less | Request Sample |
| UCECOAT® 7999 | Allnex | UCECOAT® 7999 is a tin-free and APEO-free energy-curable polyurethane dispersion with ~22% bio-carbon offering. Ideal for high hardness and durability for clear and white coats. The product has a low VOC with an easy film formation requiring no cosolvent....view more UCECOAT® 7999 is a tin-free and APEO-free energy-curable polyurethane dispersion with ~22% bio-carbon offering. Ideal for high hardness and durability for clear and white coats. The product has a low VOC with an easy film formation requiring no cosolvent. It presents a high reactivity for an increased productivity. view less | Request Sample |
