| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45...view more BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45 has a good de-aerating effect on water thinnable coatings if they are based on the following binders: polyester, acid resin, and acrylic. view less | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd ...view more BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd emulsions, with or without co-solvents. There are also very good de-aerating effects in many modified alkyds and alkyd/acrylic hybrids. This product was developed to prevent foam and bubbles during manufacture and application of aqueous coatings. BLISTER FREE 55 destroys foam very quickly by the interfacially active components. In many applications levelling is improved. view less | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying ...view more BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. BLISTER FREE 75 is a product with interfacial activity, which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is improved. view less | |
| BYK®-054 | BYK 毕克 | BYK®-054 is especially suited for solvent-free systems like PUR and epoxy floorings. It eliminates air-bubbles and ensures pinhole-free surfaces. Due to its strong incompatibility, the additive‘s influence on the transparency of clear systems must be eval...view more BYK®-054 is especially suited for solvent-free systems like PUR and epoxy floorings. It eliminates air-bubbles and ensures pinhole-free surfaces. Due to its strong incompatibility, the additive‘s influence on the transparency of clear systems must be evaluated. BYK-054 is also suitable to defoam plastisols. view less | |
| BYK®-1630 | BYK 毕克 | BYK®-1630 is a VOC and APEO-free mineral oil defoamer for aqueous architectural coatings, general industrial coatings, floor coatings and adhesives. | |
| BYK®-1640 | BYK 毕克 | BYK®-1640 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. It offers optimum performance at the lowest dosage. This product is also suitable for applications th...view more BYK®-1640 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. It offers optimum performance at the lowest dosage. This product is also suitable for applications that come into contact with food. view less | |
| BYK-1642 | BYK 毕克 | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK®-A 505 | BYK 毕克 | BYK®-A 505 is a silicone-free polymer air release agent based on renewable resources intended for unsaturated polyester resins as well as solvent-borne and solvent-free systems. It is entirely based on renewable resources and is therefore particularly rec...view more BYK®-A 505 is a silicone-free polymer air release agent based on renewable resources intended for unsaturated polyester resins as well as solvent-borne and solvent-free systems. It is entirely based on renewable resources and is therefore particularly recommended for “green” resins. view less | |
| BYK®-A 530 | BYK 毕克 | BYK®-A 530 is a silicone and polymeric defoamer for solvent-borne coatings. It is a solution of foam destroying polymers and polysiloxanes. BYK-A 530 is an excellent defoamer and air release agent. It shows its effectiveness during both the production and...view more BYK®-A 530 is a silicone and polymeric defoamer for solvent-borne coatings. It is a solution of foam destroying polymers and polysiloxanes. BYK-A 530 is an excellent defoamer and air release agent. It shows its effectiveness during both the production and processing of paint systems. BYK-A 530 is especially suitable for the usage in epoxy resin systems. view less | |
| Depol CFCⓇ-120W | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-120W is a special organic compound polymer type defoaming additive for water-based systems. This milky white liquid does not contain mineral oil or silicone, and prevents foaming and cratering during the manufacture of coatings. It finds applic...view more Depol CFCⓇ-120W is a special organic compound polymer type defoaming additive for water-based systems. This milky white liquid does not contain mineral oil or silicone, and prevents foaming and cratering during the manufacture of coatings. It finds application in water based acrylic emulsion systems, in aqueous two-component systems, and in water soluble clear coatings. view less | |
| Depol CFCⓇ-126F | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-126F is a vinyl ether with acrylic ester copolymer defoaming and de-aerating additive for organic solvent systems. This light yellow liquid has anti-flooding features, improves gloss and levelling, and defoams under initial stage and low temper...view more Depol CFCⓇ-126F is a vinyl ether with acrylic ester copolymer defoaming and de-aerating additive for organic solvent systems. This light yellow liquid has anti-flooding features, improves gloss and levelling, and defoams under initial stage and low temperatures for solvent-free high build types of coatings. It finds application in two-component solvent and solvent free based epoxy and urethane coatings, and in general industrial high temperature baking systems. view less | |
| Depol CFCⓇ-127W | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-127W is a polymer type defoaming additive for water-based systems. This milky white liquid does not contain mineral oil or silicone, and prevents foam, cratering, and bubbles during the manufacture of coatings. It does not cause a gloss reducti...view more Depol CFCⓇ-127W is a polymer type defoaming additive for water-based systems. This milky white liquid does not contain mineral oil or silicone, and prevents foam, cratering, and bubbles during the manufacture of coatings. It does not cause a gloss reduction and finds application in aqueous baking industrial coatings, in acrylic emulsions and water dispersing polyurethane systems, and in aqueous automotive and architectural coating systems. view less | |
| Depol CFCⓇ-128 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-128 is a polymer type defoaming and de-aerating additive for organic solvent systems. This light yellow liquid is compatible with air-drying and high temperature baking systems, and has gloss and levelling features. It finds application in alky...view more Depol CFCⓇ-128 is a polymer type defoaming and de-aerating additive for organic solvent systems. This light yellow liquid is compatible with air-drying and high temperature baking systems, and has gloss and levelling features. It finds application in alkyd, acrylic, and polyester melamine high temperature baking systems, in acrylic urethane, epoxy and polyurethane coatings, and in coil coatings. view less | |
| Depol CFCⓇ-130 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-130 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid features de-aerating performance during high temperature baking while simultaneously preventing gloss reduction in the process. It has anti-...view more Depol CFCⓇ-130 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid features de-aerating performance during high temperature baking while simultaneously preventing gloss reduction in the process. It has anti-flooding capabilities and has no influence on inter-adhesive properties. It finds application in alkyd and polyester baking systems, in 1,2-component acrylics and acrylic baking systems, in chlorinated rubber and epoxy coatings, and in linear polyester coatings. view less | |
| Depol CFCⓇ-133 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-133 is a polymer type defoaming and de-aerating additive for organic solvent systems. This light yellow liquid has levelling and anti-flooding features, has no influence on inter-adhesive properties, and it de-aerates during high temperature ba...view more Depol CFCⓇ-133 is a polymer type defoaming and de-aerating additive for organic solvent systems. This light yellow liquid has levelling and anti-flooding features, has no influence on inter-adhesive properties, and it de-aerates during high temperature baking. It finds application in alkyd, acrylic and polyester melamine high temperature baking systems, in acrylic urethane coatings in solvent or solvent free based epoxy coatings, and in acid catalyst or coil coating systems. view less | |
| Depol CFCⓇ-137 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-137 is a polymer type defoaming and de-aerating additive for organic solvent systems. This light yellow liquid is applicable in a wide range of coating systems. It has levelling and anti-flooding features, has no influence on inter-adhesive pro...view more Depol CFCⓇ-137 is a polymer type defoaming and de-aerating additive for organic solvent systems. This light yellow liquid is applicable in a wide range of coating systems. It has levelling and anti-flooding features, has no influence on inter-adhesive properties, and does not cause gloss reduction during processing. Applications include alkyd, acrylic and polyester melamine high temperature baking systems, acrylic lacquer and acrylic urethane coatings, chlorinated rubber and epoxy coatings, and acid catalyst and coil coating systems. view less | |
| Depol CFCⓇ-138 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-138 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has a leveling effect, and does not cause a gloss reduction or cratering during processing. It finds application in alkyd and acrylic baking...view more Depol CFCⓇ-138 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has a leveling effect, and does not cause a gloss reduction or cratering during processing. It finds application in alkyd and acrylic baking systems, in polyester melamine high temperature baking systems, and in coil coatings. view less | |
| Depol CFCⓇ-156 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-156 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid does not cause a gloss reduction, and does not influence inter-adhesive properties. It has deaerating performance during spraying, rolling, ...view more Depol CFCⓇ-156 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid does not cause a gloss reduction, and does not influence inter-adhesive properties. It has deaerating performance during spraying, rolling, and brushing of coatings. Applications include alkyd, lacquer, and fast air drying enamel systems, in 2-component urethane and epoxy coatings, and in PVC plastisol coatings. view less | |
| Depol CFCⓇ-1640 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-1640 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has no influence on inter-adhesive properties and does not crater during processing. It functions under low temperatures, and finds applica...view more Depol CFCⓇ-1640 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has no influence on inter-adhesive properties and does not crater during processing. It functions under low temperatures, and finds application in solvent and solvent-free urethane and epoxy coating systems, and in industrial baking systems. view less | |
| Depol CFCⓇ-172 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-172 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has initial defoaming properties and is effective in destroying micro-foam. It features acceptance and compatibility with coating resin, and...view more Depol CFCⓇ-172 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has initial defoaming properties and is effective in destroying micro-foam. It features acceptance and compatibility with coating resin, and has no influence on inter-adhesive properties. Applications include unsaturated polyester and unsaturated UV systems, PVC compounds, and 2-component epoxy coatings. view less | |
| Depol CFCⓇ-192 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-192 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has de-aerating performance during spraying, rolling, and brushing of coatings while preventing haze and cratering. Applications include alk...view more Depol CFCⓇ-192 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has de-aerating performance during spraying, rolling, and brushing of coatings while preventing haze and cratering. Applications include alkyd, lacquer, and fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. view less | |
| Depol CFCⓇ-193 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-193 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has de-aerating performance during spraying, rolling, and brushing of coatings while preventing haze and cratering. Applications include alk...view more Depol CFCⓇ-193 is a polymer type defoaming and de-aerating additive for organic solvent systems. This clear liquid has de-aerating performance during spraying, rolling, and brushing of coatings while preventing haze and cratering. Applications include alkyd, lacquer, and fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. view less | |
| Depol CFCⓇ-195 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-195 is a polymer type defoaming and de-aerating additive for organic solvent systems, including high-build type coatings. This clear liquid provides no gloss reduction during defoaming, and does not crater in drying films. It also prevents sepa...view more Depol CFCⓇ-195 is a polymer type defoaming and de-aerating additive for organic solvent systems, including high-build type coatings. This clear liquid provides no gloss reduction during defoaming, and does not crater in drying films. It also prevents separation between the coating and additive during long storage of coatings. Applications include 2-component solvent and solvent free based urethane and epoxy coatings, polyester acrylic baking systems, and polyester urethane UV curing coatings. view less | |
| Depol CFCⓇ-2000 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇ-2000 is a polymer type defoaming and de-aerating additive for organic solvent systems, including high-build type coatings. This clear liquid does not reduce gloss while defoaming, does not crater in drying films, and does not separate the coati...view more Depol CFCⓇ-2000 is a polymer type defoaming and de-aerating additive for organic solvent systems, including high-build type coatings. This clear liquid does not reduce gloss while defoaming, does not crater in drying films, and does not separate the coating and additive during long periods of coating storage. Applications include alkyd, lacquer, and fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. view less | |
| Depol CFCⓇOC-128 | CHEONGWOO CFC CO., LTD. | Depol CFCⓇOC-128 is a polymer type defoaming and de-aerating additive for organic solvent systems. This light yellow liquid has compatibility with - and anti-flooding effects in - high temperature baking systems. It provides gloss and finds application in...view more Depol CFCⓇOC-128 is a polymer type defoaming and de-aerating additive for organic solvent systems. This light yellow liquid has compatibility with - and anti-flooding effects in - high temperature baking systems. It provides gloss and finds application in alkyd, acrylic, and polyester melamine high temperature baking systems, in acrylic urethane, epoxy, and polyurethane coatings, and in coil and can coating systems. view less | |
| Depol NW OC-128 | Naewoi Korea Resins | Depol NW-3000 is a polymer type defoamer for solvent based systems. Depol NW-3000 shows defoaming and deaerating for products that range from air drying systems to high temperature baking systems. | |
| Depol NW-120W | Naewoi Korea Resins | Depol NW-120W is a polymer type defoamer for water based systems. This product provides defoaming or deaerating to products that it is added to. Depol NW-120W is used in water-based clear coating systems, 2-component polyurethane, high viscosity emulsion ...view more Depol NW-120W is a polymer type defoamer for water based systems. This product provides defoaming or deaerating to products that it is added to. Depol NW-120W is used in water-based clear coating systems, 2-component polyurethane, high viscosity emulsion and water-based UV coating systems. view less | |
| Depol NW-127W | Naewoi Korea Resins | Depol NW-127W is a polymer type defoamer for water based systems. The main component is a special organic compound. This product is a mineral oil free and silicone free defoamer and also shows no remaining bubble formation during defoaming. Depol NW-127W ...view more Depol NW-127W is a polymer type defoamer for water based systems. The main component is a special organic compound. This product is a mineral oil free and silicone free defoamer and also shows no remaining bubble formation during defoaming. Depol NW-127W is used in aqueous baking industrial coatings, acrylic emulsion and water dispersing polyurethane systems, aqueous automotive coating systems, and aqueous architecture coating systems. view less | |
| Depol NW-128 | Naewoi Korea Resins | Depol NW-128 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with an ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type of...view more Depol NW-128 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with an ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type of coatings, and it improves gloss and levelling. Depol NW-128 is used in alkyd, acrylic and polyester melamine high temperature baking systems, acrylic urethane, epoxy and polyurethane coatings, and coil coatings. view less | |
| Depol NW-128W | Naewoi Korea Resins | Depol NW-128W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane. It prevents foam during the manufacturing of coatings and has an initial defoaming property. Depol NW-128W is used in acrylic e...view more Depol NW-128W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane. It prevents foam during the manufacturing of coatings and has an initial defoaming property. Depol NW-128W is used in acrylic emulsions, water dispersing polyurethane systems, water based and water soluble enamel baking systems, and automotive coatings. view less | |
| Depol NW-130 | Naewoi Korea Resins | Depol NW-130 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product deaerates during high temperature baking and does not cause a gloss reduction. Depol NW-130 is used ...view more Depol NW-130 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product deaerates during high temperature baking and does not cause a gloss reduction. Depol NW-130 is used in alkyd and polyester baking systems, 1,2-component acrylic and acrylic baking systems, chlorinated rubber and epoxy coatings, and linear polyester coatings. view less | |
| Depol NW-137 | Naewoi Korea Resins | Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers....view more Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers. Depol NW-137 is used in alkyd, acrylic and polyester high temperature baking systems, acrylic lacquer and acrylic urethane coatings, chlorinated rubber and epoxy coatings, and acid catalyst and coil coating systems. view less | |
| Depol NW-138 | Naewoi Korea Resins | Depol NW-138 is a polymer type defoamer for solvent based systems. Its main component is a modified olefin polymer. This product does not cause a gloss reduction or cratering problem during defoaming or dearating. Depol NW-138 is used in coil coatings, al...view more Depol NW-138 is a polymer type defoamer for solvent based systems. Its main component is a modified olefin polymer. This product does not cause a gloss reduction or cratering problem during defoaming or dearating. Depol NW-138 is used in coil coatings, alkyd baking systems, polyester melamine high temperature baking systems, and acrylic baking systems. view less | |
| Depol NW-161 | Naewoi Korea Resins | Depol NW-161 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays superior compatibility and defoaming for organic solvent systems. Depol NW-161 is used in vi...view more Depol NW-161 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays superior compatibility and defoaming for organic solvent systems. Depol NW-161 is used in vinyl, polyurethane, and epoxy ester coatings, NC lacquer, flooring and wood coatings, and polyester, general industrial systems. view less | |
| Depol NW-1640 | Naewoi Korea Resins | Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solven...view more Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solvent and solvent-free epoxy coating systems, solvent and solvent-free urethane coating systems, and industrial baking systems. view less | |
| Depol NW-192 | Naewoi Korea Resins | Depol NW-192 is a polymer type defoamer for solvent based systems. Its main component is a special high molecular compound. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-192 is used in alkyd and lacquer ...view more Depol NW-192 is a polymer type defoamer for solvent based systems. Its main component is a special high molecular compound. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-192 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. view less | |
| Depol NW-193 | Naewoi Korea Resins | Depol NW-193 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether modified copolymer. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-193 is used in alkyd and lacqu...view more Depol NW-193 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether modified copolymer. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-193 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. view less | |
| Depol NW-2000 | Naewoi Korea Resins | Depol NW-2000 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with ester copolymer. This product shows no separation between coatings and additives during long storage and also shows no gloss reduct...view more Depol NW-2000 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with ester copolymer. This product shows no separation between coatings and additives during long storage and also shows no gloss reduction during defoaming. Depol NW-2000 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. view less | |
| Depol NW-289W | Naewoi Korea Resins | Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depo...view more Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depol NW-289W is used in acrylic emulsions, water dispersing polyurethane systems, styrene modified acrylic emulsion systems, and water soluble adhesives. view less | |
| Depol NW-3000 | Naewoi Korea Resins | Depol NW-3000 is a polymer type defoamer for solvent based systems. Its main component is a special organic compound. This product shows initial defoaming properties. Depol NW-3000 is used in PVC plastisol systems. | |
| FoamStar® ED 2521 | BASF Formulation Additives 巴斯夫配方助剂 | FoamStar® ED 2521 (formerly Dehydran® SE 1) is a universal polymer emulsion defoamer. It is an excellent defoamer for all flat to semi-gloss aqueous coatings. The eco-friendly polymer technology makes FoamStar® ED 2521 VOC-free according to EU Directive 2...view more FoamStar® ED 2521 (formerly Dehydran® SE 1) is a universal polymer emulsion defoamer. It is an excellent defoamer for all flat to semi-gloss aqueous coatings. The eco-friendly polymer technology makes FoamStar® ED 2521 VOC-free according to EU Directive 2002/42/EC and EPA Method 24 (USA) and best in class with ultra-low semi-volatile organic compound content. FoamStar® ED 2521 is suitable for manufacturing of all kinds of water-based architectural paints. It is especially recommended for high-PVC systems based on styrene-acrylic, vinyl/VeoVa™ 1 and vinyl-acrylic emulsions. view less | |
| FOAMSTAR® ED 2523 | BASF Formulation Additives 巴斯夫配方助剂 | FOAMSTAR® ED 2523 is a universal, polymer-emulsion defoamer enhanced with small amount of modified PDMS. It is an excellent defoamer for many flat to semigloss aqueous coatings. This product exhibits excellent foam suppression during grinding as well as a...view more FOAMSTAR® ED 2523 is a universal, polymer-emulsion defoamer enhanced with small amount of modified PDMS. It is an excellent defoamer for many flat to semigloss aqueous coatings. This product exhibits excellent foam suppression during grinding as well as application, retains antifoam efficiency during extended storage of paint, and it is easy to incorporate without requiring strong shear forces. It is also highly compatible, maintains gloss, and there is no fogging. FOAMSTAR® ED 2523 is VOC-free according to EU Directive 2004/42/EC and EPA Method 24 (USA) and has a very low semivolatile organic compound content. view less | |
| PAT-ADD AF 43 | Patcham LTD | PAT-ADD AF 43 is a polymeric defoamer for waterborne varnishes, wood-coatings, inks and pigment dispersions. It is low VOC and based on synthetic organic surface active compounds. It is specially formulated for low PVC systems; improved film properties ve...view more PAT-ADD AF 43 is a polymeric defoamer for waterborne varnishes, wood-coatings, inks and pigment dispersions. It is low VOC and based on synthetic organic surface active compounds. It is specially formulated for low PVC systems; improved film properties versus oil and silicone defoamers. Main benefits are: oil- and siloxane free for excellent film properties, excellent de-aeration and defoaming properties, excellent alkali- and acid resistance, contributes to substrate wetting, low-VOC, and shear resistant for high shear conditions. view less | Request Sample |
| PAT-ADD AF 61 | Patcham LTD | PAT-ADD AF 61 is a defoamer and de-aerating agent for use in solventborne coatings. PAT-ADD AF 61 is silicone free. PAT-ADD AF 61 is a very strong defoamer for wood, furniture coatings and stoving enamels. Main benefits are: strong defoaming properties, r...view more PAT-ADD AF 61 is a defoamer and de-aerating agent for use in solventborne coatings. PAT-ADD AF 61 is silicone free. PAT-ADD AF 61 is a very strong defoamer for wood, furniture coatings and stoving enamels. Main benefits are: strong defoaming properties, requires only low dosages, easy to dose, inert, and wide range of compatibility. view less | Request Sample |
| SCHWEGO® Foam 6343 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6343 is a defoamer for solvent based coating systems. decreases the surface tension and thus effects defoaming characteristics most solvent borne systems. It eliminates air bubbles during manufacture and application. Air bubbles burst quickl...view more SCHWEGO® Foam 6343 is a defoamer for solvent based coating systems. decreases the surface tension and thus effects defoaming characteristics most solvent borne systems. It eliminates air bubbles during manufacture and application. Air bubbles burst quickly before they can cause characteristic surface defects. Already small quantities of SCHWEGO® foam 6343 prevent foaming during stoving enamels or varnishes. This product is suitable for nearly all solvent borne coating systems. High efficiency is shown in alkyd (air drying), alkyd/polyester (heat-stoving), chlorinated rubber, epoxide, polyurethane, thermoplastic acrylics and reactive acrylic systems. view less | |
| SCHWEGO® Foam 6356 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6356 is a defoamer and deaerator for water-based coating systems. This turbid, light yellowish, milky liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the f...view more SCHWEGO® Foam 6356 is a defoamer and deaerator for water-based coating systems. This turbid, light yellowish, milky liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented, and the film elasticity is improved. SCHWEGO® foam 6356 is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes and UV coating systems. view less | |
| SCHWEGO® Foam 6360 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6360 is a defoamer for water-based and UV-curing coatings. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6360 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings...view more SCHWEGO® Foam 6360 is a defoamer for water-based and UV-curing coatings. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6360 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. view less | |
| SCHWEGO® Foam 6361 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV c...view more SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6361 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. view less | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic...view more SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. SCHWEGO® foam 6375 is a product with interfacial activity which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. view less | |
| SCHWEGO® Foam 8336 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contain...view more SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contains a very compatible siloxane avoiding cratering, and in many coating systems it has a favourable influence on flow. SCHWEGO® foam 8336 defoams very well in all kinds of clear coatings and slightly pigmented systems, printing inks and UV-curing systems, especially those based on acrylics. The defoaming effect is also very good in wood varnishes and adhesives. view less | |
| SCHWEGO® Mar 6561 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 6561 is a slip- and leveling additive for water-based and UV-curing coating systems. This clear, colourless liquid is VOC-free. The addition of SCHWEGO® Mar 6561 to UV coatings confers an improvement of mar and scratch resistance, increased r...view more SCHWEGO® Mar 6561 is a slip- and leveling additive for water-based and UV-curing coating systems. This clear, colourless liquid is VOC-free. The addition of SCHWEGO® Mar 6561 to UV coatings confers an improvement of mar and scratch resistance, increased resistance to blocking and as a consequence of the improved slip an increase in hardness. Additionally, the compatibility in UV systems is improved. The tendency to dirt retention is diminished and disposition to foaming is reduced. SCHWEGO® Mar 6561 does not affect gloss. view less | |
| SCHWEGO® Mar 6562 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 6562 is a slip- and leveling additive for water-based and UV-curing coating systems. This clear, colourless liquid is VOC-free. The addition of SCHWEGO® Mar 6562 to UV coatings confers an improvement of mar and scratch resistance, increased r...view more SCHWEGO® Mar 6562 is a slip- and leveling additive for water-based and UV-curing coating systems. This clear, colourless liquid is VOC-free. The addition of SCHWEGO® Mar 6562 to UV coatings confers an improvement of mar and scratch resistance, increased resistance to blocking and as a consequence of the improved slip an increase in hardness. Additionally, the compatibility in UV systems is improved and recoatability is provided. The tendency to dirt retention is diminished and disposition to foaming is reduced. This product does not affect gloss. view less | |
| SCHWEGO® Mar 8300 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8300 is a slip- and leveling additive for solvent borne coating systems. It is mainly used in conventional air drying and stoving finishes. Because of its composition SCHWEGO® Mar 8300 can be used in most binder systems. Binders containing hy...view more SCHWEGO® Mar 8300 is a slip- and leveling additive for solvent borne coating systems. It is mainly used in conventional air drying and stoving finishes. Because of its composition SCHWEGO® Mar 8300 can be used in most binder systems. Binders containing hydroxyl groups are not always compatible. The addition of SCHWEGO® mar 8300 to solvent borne coating systems improves scratch, mar and blocking resistance. view less | |
| SCHWEGO® Mar 8301 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8301 is a slip- and levelling additive for water-based coating systems. It is principally used in air drying and stoving water thinnable coatings. SCHWEGO® Mar 8301 can also show good effects in conventional coating systems. Because of its co...view more SCHWEGO® Mar 8301 is a slip- and levelling additive for water-based coating systems. It is principally used in air drying and stoving water thinnable coatings. SCHWEGO® Mar 8301 can also show good effects in conventional coating systems. Because of its composition, this product can be used in most binder systems. The addition of SCHWEGO® mar 8301 to water-based coating systems improves scratch, mar and blocking resistance. view less | |
| TEGO® Airex 922 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is ...view more TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is highly suitable for self-leveling floor coatings. It is also suitable for brush/roller applications, as well as airless and compressed air spraying. view less | Request Sample |
| TEGO® Foamex 830 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 830 is a silicone-free defoamer concentrate, highly compatible, ideally suitable for the grinding stage and pigment concentrates. It is a slightly hazy liquid organic polymer which contains fumed silica. TEGO® Foamex 830 is suitable for compr...view more TEGO® Foamex 830 is a silicone-free defoamer concentrate, highly compatible, ideally suitable for the grinding stage and pigment concentrates. It is a slightly hazy liquid organic polymer which contains fumed silica. TEGO® Foamex 830 is suitable for compressed air spraying and dip coating, flow coating, and curtain coating. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. view less | Request Sample |
| Troysol™ AFL | Arxada – Troy Corporation | Troysol™ AFL is a polymeric ester blend, silicone-free surfactant supplied in liquid form to improve bubble release and reduce pigment floating of non-aqueous systems. Troysol™ AFL is effective in solvent-based and other non-aqueous systems in which surfa...view more Troysol™ AFL is a polymeric ester blend, silicone-free surfactant supplied in liquid form to improve bubble release and reduce pigment floating of non-aqueous systems. Troysol™ AFL is effective in solvent-based and other non-aqueous systems in which surface tension-related problems such as foaming, bubble retention, bridging and pigment floating are encountered. view less | |
| YCK-660 | YCK CHEMICAL 毅克化学(上海)科技有限公司 | YCK-660 is a special modified acrylic polymer with high effective defoaming performance and good performance on suppressing and eliminating foams yielded during production, packaging and application. It has no effect on film adhesion. This product has non...view more YCK-660 is a special modified acrylic polymer with high effective defoaming performance and good performance on suppressing and eliminating foams yielded during production, packaging and application. It has no effect on film adhesion. This product has non-volatile matter of 70% and a flash point of 35℃. It has applications in automotive coatings, industrial coatings, coil coatings, furniture coatings, and printing inks. view less |
