| ADDAPT® WaxMul™ WM 110 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 110 in paints, printing inks, leather polishes, and paper coatings to improve water resistance and surface smoothness. | |
| ADDAPT® WaxMul™ WM 120 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 120 is an emulsion of polyethylene and paraffin waxes in water. It is used in paints and various kinds of polishes to provide gloss, repel water, and improve the adhesion to smooth surfaces. | |
| ADDAPT® WaxMul™ WM 15 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 15 is an emulsion of Polyethylene wax in water. It is used as an anti-slip agent, to reduce yellowing, and improves adhesion to smooth surfaces. This product is used in paints and floor, car, and leather polishes. | |
| ADDAPT® WaxMul™ WM 25 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitabl...view more ADDAPT® WaxMul™ WM 25 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, and paper coatings. This product provides high abrasion resistance, improves wet scrub resistance, helps retain gloss, improves dry rub, and is suitable as a slip agent for over print varnishes. view less | |
| ADDAPT® WaxMul™ WM 35 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 35 is an emulsion of polyethylene wax in water. It is used in paints, printing inks, floor polishes, and paper coatings. This product improves abrasion resistance and wet scrub resistance. | |
| ADDAPT® WaxMul™ WM 45 | ADDAPT Chemicals BV | ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking r...view more ADDAPT® WaxMul™ WM 45 is an emulsion of polypropylene wax in water. It is used in floor polishes, printing inks, and paints. This product has a high melting point, and it improves abrasion resistance, wet scrub resistance, surface hardness, and blocking resistance. view less | |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 h...view more AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 has rheology control of complex liquid systems and is water resistant, hydrophobising of liquid systems. It is used in coatings as an anti-settling agent, for pigment stabilization and improvement of corrosion protection. view less | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AERO...view more AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AEROSIL® R 974 to enrich at water and oil interfaces and thereby stabilize water droplets in a continuous oil phase by the Pickering effect. AEROSIL® R 974 is PCPC-listed as 'Silica dimethyl silylate'. The product is also very suitable for rheology control as well as an oil thickener. view less | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...view more AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. view less | Request Sample |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...view more Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. view less | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...view more Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. view less | |
| AQUACER® 537 | BYK 毕克 | AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking...view more AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking and slip. view less | |
| AQUACER® 539 | BYK 毕克 | AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...view more AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. view less | |
| AQUACER 570 | BYK 毕克 | AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...view more AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. view less | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...view more Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. view less | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| BC 83/132 | Basildon Chemical Company Ltd. | BC 83/132 is a methyl hydrogen polysiloxane silicone fluid that is used in paints. It displays strong cross-linking attributes and imparts anti-adhesive and hydrophobic properties to treated surfaces. This product has a specific gravity of 1.0, and a flas...view more BC 83/132 is a methyl hydrogen polysiloxane silicone fluid that is used in paints. It displays strong cross-linking attributes and imparts anti-adhesive and hydrophobic properties to treated surfaces. This product has a specific gravity of 1.0, and a flash point of greater than 100 degrees Celsius. view less | |
| BC 90/063 | Basildon Chemical Company Ltd. | BC 90/063 is a white, mobile, modified amino silicone emulsion that is used in paint polishes and vinyl protecting agents. It provides good water repelling properties and good gloss retention properties. This product is liquid in form, and is easily dilut...view more BC 90/063 is a white, mobile, modified amino silicone emulsion that is used in paint polishes and vinyl protecting agents. It provides good water repelling properties and good gloss retention properties. This product is liquid in form, and is easily dilutable. view less | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...view more Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. view less | |
| Butyl Acrylate | Henan Harvest Chem Co., LTD. | Butyl Acrylate is a clear, colorless liquid with a fruity odor. It is used in the production of homopolymers and co-polymers. This product provides water resistance, low temperature flexibility, and weather and sunlight resistance when used in latex paint...view more Butyl Acrylate is a clear, colorless liquid with a fruity odor. It is used in the production of homopolymers and co-polymers. This product provides water resistance, low temperature flexibility, and weather and sunlight resistance when used in latex paint applications. view less | |
| C-350 | Chan Sieh Enterprises Co, Ltd. | C-350 is a petroleum wax blend in the form of a white emulsion. This product is acid stable and can be blended with rosin soap. It can be used as a water-repellent agent in paper internal sizing and surface coatings. | |
| Calcium Stearate | Shanghai Tengmin Industry Co., Ltd. | Calcium Stearate comes as a fine white non-toxic powder that has several different uses across industries. This product is primarily used as an additive in paints and coatings by providing water resistance. | |
| Coadis™ 123 K | Arkema Rheology & Specialty Additives | Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-born...view more Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-borne systems. view less | Request Sample |
| Coadis™ 3412 | Arkema Rheology & Specialty Additives | Coadis™ 3412 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Coadis™ BR 40 | Arkema Rheology & Specialty Additives | Coadis™ BR 40 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobuty...view more Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 provides clinging, anti-water, and weather protection to paint and inks. view less | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl I...view more Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP15 provides clinging, anti-water, and weather protection to paint and inks. view less | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, an...view more Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, anti-water, and weather protection to paint and inks. view less | |
| CV-2502 | NuSil Silicone Technology 1 | CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embeddin...view more CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embedding compound for electronic systems. view less | |
| CV-8251 | NuSil Silicone Technology 1 | CV-8251 is a two-part clear silicone gel that is designed for enhanced performance in extreme low and high temperatures. Because of its low viscosity, it is an ideal material for potting intricate assemblies. It can also be used for applications that requ...view more CV-8251 is a two-part clear silicone gel that is designed for enhanced performance in extreme low and high temperatures. Because of its low viscosity, it is an ideal material for potting intricate assemblies. It can also be used for applications that require minimal volatile condensables to protect sensitive devices from condensation. view less | |
| CV1-2640 | NuSil Silicone Technology 1 | CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and...view more CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and electrical applications. Another function of this product is to protect sensitive devices from condensation. view less | |
| CV2-2640 | NuSil Silicone Technology 1 | CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-...view more CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-flowing material so it can be used to adhere covers onto housings. view less | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and ...view more DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven...view more DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 87 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings a...view more DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. view less | |
| Dynasylan® 6498 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colourless, nearly odorless low viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. k...view more Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colourless, nearly odorless low viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6498, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis ethanol (VOC) is significantly reduced compared to monomeric vinyl silanes. view less | |
| Dynasylan® F 8815 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8815 is a fluoroalkylfunctional water-borne oligosiloxane which acts as an oleophobic surface modification agent on oxidic, carboxy- and hydroxyfunctional substrates for example ceramic or natural fibers like cotton or leather. | |
| Dynasylan® PTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® PTEO, an alkyltrialkoxysilane, is an important monomer for use in sol-gel systems. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| EXCEVAL™ RS-1717 | Kuraray Europe GmbH 可乐丽 | EXCEVAL™ RS-1717 is a water soluble polymer that provides good water resistance and sufficient viscosity stability of its aqueous solution. | |
| EXCEVAL™ RS-2117 | Kuraray Europe GmbH 可乐丽 | EXCEVAL™ RS-2117 is a water soluble polymer that provides good water resistance and sufficient viscosity stability of its aqueous solution. | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...view more EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. view less | |
| Frotect FT-1100 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-1100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays good water repellency, hydrolytic stability, surface characteristics, color deepening, and defoaming pr...view more Frotect FT-1100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays good water repellency, hydrolytic stability, surface characteristics, color deepening, and defoaming properties. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-1200 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-1200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good defoaming properties, excellent surface characteristics, and good water repellency, hydrolyti...view more Frotect FT-1200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good defoaming properties, excellent surface characteristics, and good water repellency, hydrolytic stability, and color deepening. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-2100 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-2100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency, excellent surface characteristics, and good hydrolytic stability, color dee...view more Frotect FT-2100 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency, excellent surface characteristics, and good hydrolytic stability, color deepening, and defoaming properties. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-2200 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-2200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency and defoaming properties, excellent surface characteristics, and good hydrol...view more Frotect FT-2200 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good water repellency and defoaming properties, excellent surface characteristics, and good hydrolytic stability and color deepening. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-3000 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-3000 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and color deepening, excellent water repellency and defoaming properties...view more Frotect FT-3000 is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and color deepening, excellent water repellency and defoaming properties, and good surface characteristics. This product is ideal for use in artificial leather and coating applications. view less | |
| Frotect FT-4000 | T&L Co., Ltd. Polymer Technology Centre | Frotect FT-4000 is is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and defoaming properties, excellent water repellency and surface char...view more Frotect FT-4000 is is a solventborne, perfluorinated polyurethance-based, water and oil repellent agent in the form of a brown viscous liquid. It displays very good hydrolytic stability and defoaming properties, excellent water repellency and surface characteristics, and good color deepening. This product is ideal for use in artificial leather and coating applications. view less | |
| HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...view more HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. view less | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...view more HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. view less | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...view more HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. view less | |
| HS972 | Tianyi Chemical Engineering Material Co., Ltd. | HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 3.7 and 4.5. view less | |
| HS974 | Tianyi Chemical Engineering Material Co., Ltd. | HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. view less | |
| HS976 | Tianyi Chemical Engineering Material Co., Ltd. | HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...view more HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. view less | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 357 is a spherical synthetic wax in a non-ionic aqueous dispersion recommended for water based coating systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based coating systems. | |
| Hydrocer EE 95 (Synthetic Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer EE 95 is an anionic, high-density synthetic wax emulsion. Hydrocer EE-95 is used in both air dry and baked coatings. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP-91 is recommened for use in water based coating systems. | |
| Hydropalat® SL 3612 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® SL 3612 (formerly Perenol® HF 200) is a highly effective polymeric water repellant agent for aqueous paints. It provides hydrophobic characteristics to paints both in low and in high PVC (horizontal and vertical waterproofing treatments). Hydr...view more Hydropalat® SL 3612 (formerly Perenol® HF 200) is a highly effective polymeric water repellant agent for aqueous paints. It provides hydrophobic characteristics to paints both in low and in high PVC (horizontal and vertical waterproofing treatments). Hydropalat® SL 3612 also increases wet edges, which means an improvement of the paint application properties. view less | |
| Hydropel AF (EBS Wax Powder) | Shamrock Technologies, Inc. 三叶科技 | Hydropel AF is a micronized EBS (ethylene bisstearamide) wax powder showing multiple melting peaks ranging from 91 – 145°C. | |
| Hydropel GP (Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | Hydropel GP is a wax alloy showing multipile melting peaks ranging from 41 – 101°C. | |
| Hydropel QB (Paraffin / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | Hydropel QB is a paraffin and synthetic wax blend showing melting peaks ranging from 50 – 105°C. | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| Loxanol® MI 6840 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® MI 6840 (formerly Basophob® WDS) is a highly concentrated aqueous dispersion of paraffin wax in water. It does increase the hydrophobicity of water based exterior coatings. | |
| Methyltriethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Methyltriethoxysilane is a colorless transparent liquid that can be used as a penetrating sealer and surface modifier to generate hydrophobicity (mineral fillers or inorganic pigments). When the product is introduced to polymers it gives a medium-chain a...view more Methyltriethoxysilane is a colorless transparent liquid that can be used as a penetrating sealer and surface modifier to generate hydrophobicity (mineral fillers or inorganic pigments). When the product is introduced to polymers it gives a medium-chain alkyl functionality. view less | |
| Methyltriethoxysilane | Zhejiang Wynca Chemical Industry Group | Methyltriethoxysilane is a colorless clear liquid used as a water repellant and primer for hard coating of plastic and synthesis for cross-linked resin. | |
| Michem® Lube 135 | Michelman | Michem® Lube 135 promotes water and mar resistance and anti-blocking properties when used as an additive in various coating formulations. This product has proven successful for rubber glove release as well as various paint and coatings applications. | |
| Michem® Lube 180 | Michelman | Michem® Lube 180 is an anionic co-emulsion of carnauba and paraffin waxes that provides slip, release and anti-blocking properties in a number of applications from wood coatings to synthetic and natural lattices. It also provides mar and scratch resistanc...view more Michem® Lube 180 is an anionic co-emulsion of carnauba and paraffin waxes that provides slip, release and anti-blocking properties in a number of applications from wood coatings to synthetic and natural lattices. It also provides mar and scratch resistance and water repellence in varnishes and other coatings. view less | |
| Michem® Lube 182 | Michelman | Michem® Lube 182 provides slip, release and anti-block properties in a number of applications ranging from wood coatings to being blended with synthetic and natural lattices. It is also a mar and scratch resistant and water repellent additive in varnishes...view more Michem® Lube 182 provides slip, release and anti-block properties in a number of applications ranging from wood coatings to being blended with synthetic and natural lattices. It is also a mar and scratch resistant and water repellent additive in varnishes and other coatings. This product is slightly higher in melt point than Michem® Lube 180. view less | |
| Michem® Lube 190 | Michelman | Michem® Lube 190 is an anionic polyethylene wax emulsion that provides mar, rub, block and scratch resistance as well as improved water resistance in coatings and graphic arts formulations. | |
| Michem® Lube 270R | Michelman | Michem® Lube 270R provides excellent water and block resistance in paint and coating formulations. This product is useful for long term water bead and for water repellency on wood as well as a tire dressing and buffability for auto care. | |
| Michem® Lube 743G | Michelman | Michem® Lube 743G is a nonionic paraffin wax emulsion, exhibiting a high degree of water resistance and block resistance this product is used in many water based coating applications. | |
| Michem® Prime 498340R | Michelman | Michem® Prime 498340R is an ethylene acrylic acid dispersion. It provides outstanding adhesion to metallic and cellulosic substrates and enhances the water, grease, oil and solvent resistance of coatings and adhesives and is a high solids, more economical...view more Michem® Prime 498340R is an ethylene acrylic acid dispersion. It provides outstanding adhesion to metallic and cellulosic substrates and enhances the water, grease, oil and solvent resistance of coatings and adhesives and is a high solids, more economical version of Michem® Prime 4983R. The adhesion properties of Michem® Prime facilitate its use as a primer for extrusion coatings. Utilizing this "tie coat" functionality, dissimilar materials can be combined to produce a substrate with the unique properties of each material. view less | |
| Michem® Prime 4983R | Michelman | Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or prim...view more Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings. view less | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...view more MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. view less | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...view more MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. view less | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...view more MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. view less | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...view more MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. view less |
