| Chinox® TPP (Triphenyl Phosphite) | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chinox® TPP (Triphenyl Phosphite) is a liquid antioxidant with UV stabilizer performance designed specifically for the protection of polymers from the damage of UV light and heat stability processing. This light yellowish liquid is very solvent soluble, a...view more Chinox® TPP (Triphenyl Phosphite) is a liquid antioxidant with UV stabilizer performance designed specifically for the protection of polymers from the damage of UV light and heat stability processing. This light yellowish liquid is very solvent soluble, and it has good resin compatibility. view less | |
| Chisorb® 971 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chisorb® 971 is a liquid UV absorber designed specifically for the protection of polyurethane from the damage of UV light. It is more solvent soluble, has better resin compatibility, is less volatile, and provides a degree of stabilization that is signifi...view more Chisorb® 971 is a liquid UV absorber designed specifically for the protection of polyurethane from the damage of UV light. It is more solvent soluble, has better resin compatibility, is less volatile, and provides a degree of stabilization that is significant better than other UV absorbers based on benzotriazole or benzophenone. This product is a light yellow liquid. view less | |
| Doublecure® DETX | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doublecure® DETX is the most widely used photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This product is a pale yellow powder...view more Doublecure® DETX is the most widely used photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This product is a pale yellow powder with a very faint odor. The usage rates vary according to the composition of the system, source of light, line speed, and film thickness but usually lie between 0.25 % to 3 % w/w together with photoactivators at 2 - 5 % w/w. view less | |
| Doublecure® ITX | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doublecure® ITX is a photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This pale yellow powder is used to enhance curing proper...view more Doublecure® ITX is a photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This pale yellow powder is used to enhance curing properties. The usage rates vary according to the composition of the system, source of light, line speed, and film thickness but usually lie between 0.25 % to 3 % w/w together with photoactivators at 2 - 5 % w/w. Applications include printing ink, decorative coating for metal cans, solder mask, and pressure sensitive sheet. view less | |
| Doubletex OB | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doubletex OB is a benzoxazole optical brightener. It is recommended for use in most coating and plastic applications to enhance whiteness. This product is a yellowish powder that is also odorless. It is highly efficient and suitable for the following addi...view more Doubletex OB is a benzoxazole optical brightener. It is recommended for use in most coating and plastic applications to enhance whiteness. This product is a yellowish powder that is also odorless. It is highly efficient and suitable for the following additional applications: as a whiteness mask for yellowish shelf clear coating; printing ink for security, safeguard; manufacture of fluorescent pigments/dyestuffs to reinforce the brightness; and increase deep tone for dark black and blue printing ink. view less | |
| Lignostab® 1198 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Lignostab® 1198 is a photo stabilizer developed specifically for wood pre-treatments and effectively stops the photo-oxidation of lignin. It is highly effective for the color stabilization of natural and tinted or stained wood for interior application. Us...view more Lignostab® 1198 is a photo stabilizer developed specifically for wood pre-treatments and effectively stops the photo-oxidation of lignin. It is highly effective for the color stabilization of natural and tinted or stained wood for interior application. Used in wood primers for exterior applications it can extend the retention of properties such as coating adhesion and resistance to failures such as flaking and cracking, therefore resulting in higher durability. Especially for high performance outdoor applications where long-lasting coatings are required, e.g., wooden window frames, Lignostab® 1198 also allows the use of non- or low-pigmented coatings. view less | |
| SCHWEGO® Foam 6360 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6360 is a defoamer for water-based and UV-curing coatings. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6360 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings...view more SCHWEGO® Foam 6360 is a defoamer for water-based and UV-curing coatings. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6360 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. view less | |
| SCHWEGO® Foam 6361 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV c...view more SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6361 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. view less | |
| SCHWEGO® Wett 6260 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6260 is a polymeric wetting and dispersing additive for water-based coating systems. This product universally suitable for pigment milling in water-based coating systems. It shortens milling time, because pigment agglomerates are ruptured an...view more SCHWEGO® Wett 6260 is a polymeric wetting and dispersing additive for water-based coating systems. This product universally suitable for pigment milling in water-based coating systems. It shortens milling time, because pigment agglomerates are ruptured and stabilised effectively. Hence, sedimentation and demixing of the pigments, respectively floating or flooding during application, are prevented. The colour strength of pigments is improved and the colour shade does not change even after long storage. SCHWEGO® wett 6260 is compatible with most resin systems. SCHWEGO® wett 6260 is suitable to disperse inorganic and organic pigments and carbon black. It is especially suitable for the production of UV coatings. SCHWEGO® wett 6260 is also suitable for alkyd-, acryl-, polyester, epoxy- and PUR-coating systems. view less |
